Boosting the Oxygen Evolution Activity of FeNi Oxides/Hydroxides by Molecular and Atomic Engineering.

FeNi oxides/hydroxides are the best performing catalysts for oxidizing water at basic pH. Consequently, their improvement is the cornerstone to develop more efficient artificial photosynthetic systems. During the last 5 years different reports have demonstrated an enhancement of their activity by engineering their structures via: (1) modulation of the number of oxygen, iron and nickel vacancies; (2) single atoms (SAs) doping with metals such as Au, Ir, Ru and Pt; and (3) modification of their surface using organic ligands. All these strategies have led to more active and stable electrocatalysts for oxygen evolution rection (OER). In this Concept, we critically analyze these strategies using the most relevant examples.

Unravelling the Mechanistic Pathway of the Hydrogen Evolution Reaction Driven by a Cobalt Catalyst.

A cobalt complex bearing a κ-N3 P2 ligand is presented (1+ or CoI (L), where L is (1E,1'E)-1,1'-(pyridine-2,6-diyl)bis(N-(3-(diphenylphosphanyl)propyl)ethan-1-imine). Complex 1+ is stable under air at oxidation state CoI thanks to the π-acceptor character of the phosphine groups. Electrochemical behavior of 1+ reveals a two-electron CoI /CoIII oxidation process and an additional one-electron reduction, which leads to an enhancement in the current due to hydrogen evolution reaction (HER) at Eonset =-1.6 V vs Fc/Fc+ . In the presence of 1 equiv of bis(trifluoromethane)sulfonimide, 1+ forms the cobalt hydride derivative CoIII (L)-H (22+ ), which has been fully characterized. Further addition of 1 equiv of CoCp*2 (Cp* is pentamethylcyclopentadienyl) affords the reduced CoII (L)-H (2+ ) species, which rapidly forms hydrogen and regenerates the initial CoI (L) (1+ ). The spectroscopic characterization of catalytic intermediates together with DFT calculations support an unusual bimolecular homolytic mechanism in the catalytic HER with 1+ .

A Million Turnover Molecular Anode for Catalytic Water Oxidation.

Molecular ruthenium-based water oxidation catalyst precursors of general formula [Ru(tda)(Li )2 ] (tda2- is [2,2':6',2''-terpyridine]-6,6''-dicarboxylato; L1 =4-(pyren-1-yl)-N-(pyridin-4-ylmethyl)butanamide, 1 b; L2 =4-(pyren-1-yl)pyridine), 1 c), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi-walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water-oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pH 7 with an Eapp =1.45 V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified.

Molecular water oxidation mechanisms followed by transition metals: state of the art.

One clean alternative to fossil fuels would be to split water using sunlight. However, to achieve this goal, researchers still need to fully understand and control several key chemical reactions. One of them is the catalytic oxidation of water to molecular oxygen, which also occurs at the oxygen evolving center of photosystem II in green plants and algae. Despite its importance for biology and renewable energy, the mechanism of this reaction is not fully understood. Transition metal water oxidation catalysts in homogeneous media offer a superb platform for researchers to investigate and extract the crucial information to describe the different steps involved in this complex reaction accurately. The mechanistic information extracted at a molecular level allows researchers to understand both the factors that govern this reaction and the ones that derail the system to cause decomposition. As a result, rugged and efficient water oxidation catalysts with potential technological applications can be developed. In this Account, we discuss the current mechanistic understanding of the water oxidation reaction catalyzed by transition metals in the homogeneous phase, based on work developed in our laboratories and complemented by research from other groups. Rather than reviewing all of the catalysts described to date, we focus systematically on the several key elements and their rationale from molecules studied in homogeneous media. We organize these catalysts based on how the crucial oxygen-oxygen bond step takes place, whether via a water nucleophilic attack or via the interaction of two M-O units, rather than based on the nuclearity of the water oxidation catalysts. Furthermore we have used DFT methodology to characterize key intermediates and transition states. The combination of both theory and experiments has allowed us to get a complete view of the water oxidation cycle for the different catalysts studied. Finally, we also describe the various deactivation pathways for these catalysts.

Powerful Bis-facially Pyrazolate-Bridged Dinuclear Ruthenium Epoxidation Catalyst.

A new bis-facial dinuclear ruthenium complex, {[Ru(II)(bpy)]2(µ-bimp)(µ-Cl)}(2+), 2(2+), containing a hexadentate pyrazolate-bridging ligand (Hbimp) and bpy as auxiliary ligands has been synthesized and fully characterized in solution by spectrometric, spectroscopic, and electrochemical techniques. The new compound has been tested with regard to its capacity to oxidize water and alkenes. The in situ generated bis-aqua complex, {[Ru(II)(bpy)(H2O)]2(µ-bimp)}(3+), 3(3+), is an excellent catalyst for the epoxidation of a wide range of alkenes. High turnover numbers (TN), up to 1900, and turnover frequencies (TOF), up to 73 min(-1), are achieved using PhIO as oxidant. Moreover, 3(3+) presents an outstanding stereospecificity for both cis and trans olefins toward the formation of their corresponding epoxides due to specific interactions transmitted by its ligand scaffold. A mechanistic analysis of the epoxidation process has been performed based on density functional theory (DFT) calculations in order to better understand the putative cooperative effects within this dinuclear catalyst.

Dinuclear ruthenium complexes containing the Hpbl ligand: synthesis, characterization, linkage isomerism, and epoxidation catalysis.

Three dinucleating Ru-Cl complexes containing the hexadentate dinucleating ligand [1,1'-(4-methyl-1H-pyrazole-3,5-diyl)bis(1-(pyridin-2-yl)ethanol)] (Hpbl) and the meridional 2,2':6',2″-terpyridine ligand (trpy) have been prepared and isolated. These complexes include {[RuCl(trpy)]2(µ-pbl-κ-N(3)O)}(+) (1a(+)), {[RuCl(trpy)]2(µ-Hpbl-κ-N(3)O)}(2+) (1b(2+)), and {[RuCl(trpy)]2(µ-Hpbl-κ-N(2)O(2))}(2+) (1c(2+)) and were characterized by analytic and spectroscopic techniques. In addition, complexes 1b(2+) and 1c(2+) were characterized in the solid state by monocrystal X-ray diffraction analysis. The coordination versatility of the Hpbl ligand allows the presence of multiple isomers that can be obtained depending on the Ru oxidation state and were thoroughly characterized by electrochemical techniques, namely, cyclic voltammetry and coulometry. Finally, 1a(+) and its recently reported mononuclear analogue, in-[RuCl(Hpbl)(trpy)](+), have been tested as catalysts for epoxidation of cis-ß-methylstyrene.

Synthesis, characterization, and linkage isomerism in mononuclear ruthenium complexes containing the new pyrazolate-based ligand Hpbl.

A new tetradentate dinucleating ligand [1,1'-(4-methyl-1H-pyrazole-3,5-diyl)bis(1-(pyridin-2-yl)ethanol)] (Hpbl) containing an O/N mixed donor set of atoms has been synthesized and characterized by analytical and spectroscopic techniques. The Ru-Cl and Ru-aqua complexes containing this ligand of general formula [Ru(II)X(Hpbl)(trpy)](y+) (trpy = 2,2':6',2″-terpyridine; X = Cl, y = 1; X = H2O, y = 2) have been prepared and thoroughly characterized by spectroscopic and electrochemical techniques. The Ru-aqua complex 2 undergoes N → O linkage isomerization as observed electrochemically, and the related thermodynamic and kinetic parameters are extracted from cyclic voltammetry experiments together with DIGISIM, a CV simulation package. Under basic conditions an additional isomer is observed where the pyrazolyl group in the Hpbl ligand is replaced by the geminal pyridyl group. Further structural and electronic characterization of all the isomers has been carried out by means of DFT calculations.

Ruthenium complexes with chiral bis-pinene ligands: an array of subtle structural diversity.

A new chiral derivative of the N,N-bis(2-pyridylmethyl)ethylamine (bpea) ligand, Me-pinene[5,6]bpea [(-)-L1], has been prepared from a new aldehyde building block [Me-pinene-aldehyde, (-)-4] arising from the monoterpene chiral pool. The tridentate (-)-L1 ligand has been employed to prepare a new set of Ru-Cl complexes in combination with didentate 2,2'-bipyridine (bpy) with the general formula [RuCl((-)-L1)(bpy)](+). These complexes have been characterized in solution by cyclic voltammetry, UV-vis, and 1D and 2D NMR spectroscopy. Isomeric mixtures of trans,fac-C1a and anti,mer-C1c compounds are formed when (-)-L1 is reacted with a [Ru(bpy)(MeOH)Cl3] precursor. Density functional theory calculations of all of the potential isomers of this reaction have been performed in order to interpret the experimental results in terms of electronic and steric effects and also to unravel the observed isomerization pathway between anti,mer-C1c and trans,fac-C1a.

Influence of Cocatalysts (Ni, Co, and Cu) and Synthesis Method on the Photocatalytic Activity of Exfoliated Graphitic Carbon Nitride for Hydrogen Production.

Exfoliated graphitic carbon nitride (ex-g-CN) was synthesized and loaded with non-noble metals (Ni, Cu, and Co). The synthesized catalysts were tested for hydrogen production using a 300-W Xe lamp equipped with a 395 nm cutoff filter. A noncommercial double-walled quartz-glass reactor irradiated from the side was used with a 1 g/L catalyst in 20 mL of a 10 vol% triethanolamine aqueous solution. For preliminary screening, the metal-loaded ex-g-CN was synthesized using the incipient wetness impregnation method. The highest hydrogen production was observed on the Ni-loaded ex-g-CN, which was selected to assess the impact of the synthesis method on hydrogen production. Ni-loaded ex-g-CN was synthesized using different synthesis methods: incipient wetness impregnation, colloidal deposition, and precipitation deposition. The catalysts were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption using the Brunauer-Emmett-Teller method, and transmission electron microscopy. The Ni-loaded ex-g-CN synthesized using the colloidal method performed best with a hydrogen production rate of 43.6 µmol h-1 g-1. By contrast, the catalysts synthesized using the impregnation and precipitation methods were less active, with 28.2 and 10.1 µmol h-1 g-1, respectively. The hydrogen production performance of the suspended catalyst (440 µmol m-2 g-1) showed to be superior to that of the corresponding immobilized catalyst (236 µmol m-2 g-1).

Insights into the light-driven hydrogen evolution reaction of mesoporous graphitic carbon nitride decorated with Pt or Ru nanoparticles.

Ru or Pt nanoparticles have been prepared following the organometallic approach and deposited onto the surface of mesoporous graphitic carbon nitride (mpg-CN). Three different Ru-based samples have also been compared to investigate the effect of 4-phenylpyridine as a stabilizing agent. The photocatalytic performance towards the hydrogen evolution reaction (HER) has been tested showing that all hybrid systems clearly outperform the photocatalytic activity of bare mpg-CN. In particular, Pt-decorated mpg-CN yields the largest H2 production upon visible-light irradiation (870 µmol h-1 g-1, TOF = 14.1 h-1, TON = 339 after 24 h) when compared with the Ru-based samples (137-155 µmol h-1 g-1, TOFs between 2.3-2.7 h-1, TONs between 54-57 after 24 h). Long-term photochemical tests (up to 65 h irradiation) show also an improved stability of the Pt-based samples over the Ru counterpart. Photophysical experiments aimed at rationalizing the photocatalytic performance of the different hybrid systems elucidate that the enhanced activity of the Pt-decorated mpg-CN over the Ru-based analogues arises from improved electron transfer kinetics from mpg-CN to the metal nanoparticles.

Design of new N,O hybrid pyrazole derived ligands and their use as stabilizers for the synthesis of Pd nanoparticles.

We describe the stabilization studies of new palladium nanoparticles (Pd NPs) with a family of hybrid ligands. For this purpose, two new N,O-hybrid pyrazole derived ligands, as well as other previously reported, have been used as NP stabilizing agents following an organometallic approach. A comparison with corresponding palladium complexes has been carried out. We have also studied the superstructures formed by the agglomeration of NPs. To evaluate the scope of the system, different parameters have been studied such as the structure of the ligand, the ligand/metal ratio, the nature of the solvent, the concentration and the reaction time. The colloidal materials resulting from the different syntheses were all characterized by IR, transmission electron microscopy techniques at low or high resolution (TEM and HR-TEM), and scanning electron microscopy (SEM-FEG). All these observations have allowed us to better understand the coordination modes of the different ligands onto the surface of the NPs.

Organocatalytic vs. Ru-based electrochemical hydrogenation of nitrobenzene in competition with the hydrogen evolution reaction.

The electrochemical reduction of organic contaminants allows their removal from water. In this contribution, the electrocatalytic hydrogenation of nitrobenzene is studied using both oxidized carbon fibres and ruthenium nanoparticles supported on unmodified carbon fibres as catalysts. The two systems produce azoxynitrobenzene as the main product, while aniline is only observed in minor quantities. Although PhNO2 hydrogenation is the favoured reaction, the hydrogen evolution reaction (HER) competes in both systems under catalytic conditions. H2 formation occurs in larger amounts when using the Ru nanoparticle based catalyst. While similar reaction outputs were observed for both catalytic systems, DFT calculations revealed some significant differences related to distinct interactions between the catalytic material and the organic substrates or products, which could pave the way for the design of new catalytic materials.

Ruthenium Nanoparticles for Catalytic Water Splitting.

Both global warming and limited fossil resources make the transition from fossil to solar fuels an urgent matter. In this regard, the splitting of water activated by sunlight is a sustainable and carbon-free new energy conversion scheme able to produce efficient technological devices. The availability of appropriate catalysts is essential for the proper kinetics of the two key processes involved, namely, the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). During the last decade, ruthenium nanoparticle derivatives have emerged as true potential substitutes for the state-of-the-art platinum and iridium oxide species for the HER and OER, respectively. Thus, after a summary of the most common methods for catalyst benchmarking, this review covers the most significant developments of ruthenium-based nanoparticles used as catalysts for the water-splitting process. Furthermore, the key factors that govern the catalytic performance of these nanocatalysts are discussed in view of future research directions.

trans-Dichloridobis(triphenyl-phosphine)palladium(II).

The title compound, [PdCl(2){P(C(6)H(5))(3)}(2)], has a slightly distorted square-planar geometry, with the chloride ligands coordinated in a trans configuration. The Pd atom is located on a centre of inversion.

Rational design of a neutral pH functional and stable organic photocathode.

In this work we lay out design guidelines for catalytically more efficient organic photocathodes achieving stable hydrogen production in neutral pH. We propose an organic photocathode architecture employing a NiO hole selective layer, a PCDTBT:PCBM bulk heterojunction, a compact TiO2 electron selective contact and a RuO2 nanoparticle catalyst. The role of each layer is discussed in terms of durability and function. With this strategically designed organic photocathode we obtain stable photocurrent densities for over 5 h and discuss routes for further performance improvement.

Dissimilar catalytic behavior of molecular or colloidal palladium systems with a new NHC ligand.

In this work, we describe the synthesis of a new N-heterocyclic carbene (NHC) ligand, derived from a hybrid pyrazole-imidazolium scaffold, namely 1-[2-(3,5-dimethylpyrazol-1-yl)ethyl]-3-((S)-1-phenylethyl)-3H-imidazol-2-ylidene (L). This ligand has been used as a stabilizer for the organometallic synthesis of palladium(0) nanoparticles (Pd NPs). L presents a better stabilizing effect than its pre-carbenic HLCl counterpart, allowing the formation of isolated Pd NPs while HLCl yields aggregated ones. Additionally, molecular Pd(ii) coordination compounds of L and HLCl were synthesized and characterized to better understand the coordination modes of these ligands. Both molecular and colloidal Pd systems have been further tested in catalytic C-C coupling processes. Three different types of reactions have been observed depending on the catalytic system: (i) the Suzuki-Miyaura reaction takes place with Pd molecular complexes; (ii) a secondary reaction, the dehalogenation of the substrate, is always detected and (iii) the C-C homocoupling between two molecules of bromoarenes is observed with colloidal catalysts.

Mononuclear ruthenium compounds bearing N-donor and N-heterocyclic carbene ligands: structure and oxidative catalysis.

A new CNNC carbene-phthalazine tetradentate ligand has been synthesised, which in the reaction with [Ru(T)Cl3] (T = trpy, tpm, bpea; trpy = 2,2';6',2''-terpyridine; tpm = tris(pyrazol-1-yl)methane; bpea = N,N-bis(pyridin-2-ylmethyl)ethanamine) in MeOH or iPrOH undergoes a C-N bond scission due to the nucleophilic attack of a solvent molecule, with the subsequent formation of the mononuclear complexes cis-[Ru(PhthaPz-OR)(trpy)X]n+, [Ru(PhthaPz-OMe)(tpm)X]n+ and trans,fac-[Ru(PhthaPz-OMe)(bpea)X]n+ (X = Cl, n = 1; X = H2O, n = 2; PhthaPz-OR = 1-(4-alkoxyphthalazin-1-yl)-3-methyl-1H-imidazol-3-ium), named 1a+/2a2+ (R = Me), 1b+/2b2+ (R = iPr), 3+/42+ and 5+/62+, respectively. Interestingly, regulation of the stability regions of different Ru oxidation states is obtained by different ligand combinations, going from 62+, where Ru(iii) is clearly stable and mono-electronic transfers are favoured, to 2a2+/2b2+, where Ru(iii) is almost unstable with regard to its disproportionation. The catalytic performance of the Ru-OH2 complexes in chemical water oxidation at pH 1.0 points to poor stability (ligand oxidation), with subsequent evolution of CO2 together with O2, especially for 42+ and 62+. In electrochemically driven water oxidation, the highest TOF values are obtained for 2a2+ at pH 1.0. In alkene epoxidation, complexes favouring bi-electronic transfer processes show better performances and selectivities than those favouring mono-electronic transfers, while alkenes containing electron-donor groups show better performances than those bearing electron-withdrawing groups. Finally, when cis-ß-methylstyrene is employed as the substrate, no cis/trans isomerization takes place, thus indicating the existence of a stereospecific process.

Chemical, electrochemical and photochemical molecular water oxidation catalysts.

Hydrogen release from the splitting of water by simply using sunlight as the only energy source is an old human dream that could finally become a reality. This process involves both the reduction and oxidation of water into hydrogen and oxygen, respectively. While the first process has been fairly overcome, the conversion of water into oxygen has been traditionally the bottleneck process hampering the development of a sustainable hydrogen production based on water splitting. Fortunately, a revolution in this field has occurred during the past decade, since many research groups have been conducting an intense research in this area. Thus, while molecular, well-characterized catalysts able to oxidize water were scarce just five years ago, now a wide range of transition metal based compounds has been reported as active catalysts for this transformation. This review reports the most prominent key advances in the field, covering either examples where the catalysis is triggered chemically, electrochemically or photochemically.