Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nature ; 503(7477): 504-8, 2013 Nov 28.
Artigo em Inglês | MEDLINE | ID: mdl-24162849

RESUMO

Organic semiconductors are studied intensively for applications in electronics and optics, and even spin-based information technology, or spintronics. Fundamental quantities in spintronics are the population relaxation time (T1) and the phase memory time (T2): T1 measures the lifetime of a classical bit, in this case embodied by a spin oriented either parallel or antiparallel to an external magnetic field, and T2 measures the corresponding lifetime of a quantum bit, encoded in the phase of the quantum state. Here we establish that these times are surprisingly long for a common, low-cost and chemically modifiable organic semiconductor, the blue pigment copper phthalocyanine, in easily processed thin-film form of the type used for device fabrication. At 5 K, a temperature reachable using inexpensive closed-cycle refrigerators, T1 and T2 are respectively 59 ms and 2.6 µs, and at 80 K, which is just above the boiling point of liquid nitrogen, they are respectively 10 µs and 1 µs, demonstrating that the performance of thin-film copper phthalocyanine is superior to that of single-molecule magnets over the same temperature range. T2 is more than two orders of magnitude greater than the duration of the spin manipulation pulses, which suggests that copper phthalocyanine holds promise for quantum information processing, and the long T1 indicates possibilities for medium-term storage of classical bits in all-organic devices on plastic substrates.

2.
Small Methods ; : e2400550, 2024 Jun 11.
Artigo em Inglês | MEDLINE | ID: mdl-38863124

RESUMO

α-Sn, a new elemental topological quantum material, has drawn substantial attention lately. Unique transport properties and intriguing spintronics applications of α-Sn are demonstrated, resurrecting this material from its notorious "tin pest" infamy. With a diamond cubic crystal structure, group-IV α-Sn holds the potential for integrated topological quantum devices on Si. However, directly growing α-Sn on Si is still challenging due to the ≈20% lattice mismatch. Here, a new method is demonstrated to grow 200 nm-thick α-Sn microstructures on a 2 nm-thick Ge seed layer on Si substrate by physical vapor deposition. In situ Raman spectroscopy reveals that the as-deposited ß-Sn melts upon rapid thermal annealing at 350-450 °C and solidifies to α-Sn after cooling back to room temperature, seeded by heterogeneous nucleation on the Ge layer. Cooling condition and HCl etching are tuned to achieve phase-pure α-Sn microstructures toward quantum devices. Approximately 1 at.% Ge is alloyed into α-Sn due to diffusion from the Ge seed layer, which helps stabilize α-Sn thermodynamically to facilitate device processing. A compressive strain is incorporated into these α-Sn microstructures, making them 3D topological Dirac semimetals for integrated quantum devices on Si.

3.
Adv Mater ; 35(26): e2210894, 2023 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-36959753

RESUMO

Thin ferroelectric materials hold great promise for compact nonvolatile memory and nonlinear optical and optoelectronic devices. Herein, an ultrathin in-plane ferroelectric material that exhibits a giant nonlinear optical effect, group-IV monochalcogenide SnSe, is reported. Nanometer-scale ferroelectric domains with ≈90°/270° twin boundaries or ≈180° domain walls are revealed in physical-vapor-deposited SnSe by lateral piezoresponse force microscopy. Atomic structure characterization reveals both parallel and antiparallel stacking of neighboring van der Waals ferroelectric layers, leading to ferroelectric or antiferroelectric ordering. Ferroelectric domains exhibit giant nonlinear optical activity due to coherent enhancement of second-harmonic fields and the as-resulted second-harmonic generation was observed to be 100 times more intense than monolayer WS2 . This work demonstrates in-plane ferroelectric ordering and giant nonlinear optical activity in SnSe, which paves the way for applications in on-chip nonlinear optical components and nonvolatile memory devices.

4.
Science ; 382(6677): 1422-1427, 2023 Dec 22.
Artigo em Inglês | MEDLINE | ID: mdl-38060675

RESUMO

Twisted interfaces between stacked van der Waals (vdW) cuprate crystals present a platform for engineering superconducting order parameters by adjusting stacking angles. Using a cryogenic assembly technique, we construct twisted vdW Josephson junctions (JJs) at atomically sharp interfaces between Bi2Sr2CaCu2O8+x crystals, with quality approaching the limit set by intrinsic JJs. Near 45° twist angle, we observe fractional Shapiro steps and Fraunhofer patterns, consistent with the existence of two degenerate Josephson ground states related by time-reversal symmetry (TRS). By programming the JJ current bias sequence, we controllably break TRS to place the JJ into either of the two ground states, realizing reversible Josephson diodes without external magnetic fields. Our results open a path to engineering topological devices at higher temperatures.

5.
Nanotechnology ; 23(18): 185302, 2012 May 11.
Artigo em Inglês | MEDLINE | ID: mdl-22498712

RESUMO

We demonstrate that a low energy focused electron beam can locally pattern graphene coated with a thin ice layer. The irradiated ice plays a crucial role in the process by providing activated species that locally remove graphene from a silicon dioxide substrate. After patterning the graphene, the ice resist is easily removed by sublimation to leave behind a clean surface with no further processing. More generally, our findings demonstrate that ice-assisted e-beam lithography can be used to pattern very thin materials deposited on substrate surfaces. The procedure is performed in situ in a modified scanning electron microscope. Desirable structures such as nanoribbons are created using the method. Defects in graphene from electrons backscattered from the bulk substrate are identified. They extend several microns from the e-beam writing location. We demonstrate that these defects can be greatly reduced and localized by using thinner substrates and/or gentle thermal annealing.

6.
Nanotechnology ; 21(2): 025304, 2010 Jan 15.
Artigo em Inglês | MEDLINE | ID: mdl-19955611

RESUMO

We report a new method for introducing metal atoms into silicon wafers, using negligible thermal budget. Molecular thin films are irradiated with ultra-violet light releasing metal species into the semiconductor substrate. Secondary ion mass spectrometry and x-ray absorption spectroscopy show that Mn is incorporated into Si as an interstitial dopant. We propose that our method can form the basis of a generic low-cost, low-temperature technology that could lead to the creation of ordered dopant arrays.


Assuntos
Cristalização/métodos , Manganês/química , Nanoestruturas/química , Nanotecnologia/métodos , Silício/química , Substâncias Macromoleculares/química , Substâncias Macromoleculares/efeitos da radiação , Manganês/efeitos da radiação , Teste de Materiais , Conformação Molecular/efeitos da radiação , Nanoestruturas/efeitos da radiação , Nanoestruturas/ultraestrutura , Tamanho da Partícula , Silício/efeitos da radiação , Propriedades de Superfície/efeitos da radiação , Raios Ultravioleta
7.
Phys Chem Chem Phys ; 12(1): 123-31, 2010 Jan 07.
Artigo em Inglês | MEDLINE | ID: mdl-20024451

RESUMO

A method has been developed for the attachment of a dithiolane group to endohedral metallofullerenes via a 1,3-dipolar cycloaddition reaction. This sulfur-containing functional group serves as an anchor, enabling efficient immobilisation of endohedral fullerenes on Au(111) surfaces at room temperature, directly from the solution phase. The functionalised fullerenes form disordered monolayers that exhibit no long-range ordering, which is attributed to both the strong bonding of the dithiolane anchor to the surface and to the conformational flexibility of the functional group. Endohedral fullerenes Er(3)N@C(80) and Sc(3)N@C(80) have been used as models for functionalisation and subsequent surface deposition. Their chemical reactivity towards dithiolane functionalisation and their surface behaviour have been compared to that of C(60). The endohedral fullerenes appear to be significantly less reactive towards the functionalisation than C(60), however they bind in a similar manner to a gold surface as their dithiolane terminated C(60) counterparts. The optical activity of Er(3)N@C(80) molecules is preserved after attachment of the functional group. We report a splitting of the endohedral Er(3+) emission lines due to the reduction in symmetry of the functionalised fullerene cage, as compared to the highly symmetrical icosahedral C(80) cage of pristine Er(3)N@C(80).

8.
ACS Nano ; 6(12): 10808-15, 2012 Dec 21.
Artigo em Inglês | MEDLINE | ID: mdl-23186550

RESUMO

Nanostructure and molecular orientation play a crucial role in determining the functionality of organic thin films. In practical devices, such as organic solar cells consisting of donor-acceptor mixtures, crystallinity is poor and these qualities cannot be readily determined by conventional diffraction techniques, while common microscopy only reveals surface morphology. Using a simple nondestructive technique, namely, continuous-wave electron paramagnetic resonance spectroscopy, which exploits the well-understood angular dependence of the g-factor and hyperfine tensors, we show that in the solar cell blend of C(60) and copper phthalocyanine (CuPc)-for which X-ray diffraction gives no information-the CuPc, and by implication the C(60), molecules form nanoclusters, with the planes of the CuPc molecules oriented perpendicular to the film surface. This information demonstrates that the current nanostructure in CuPc:C(60) solar cells is far from optimal and suggests that their efficiency could be considerably increased by alternative film growth algorithms.


Assuntos
Fontes de Energia Elétrica , Fulerenos/química , Indóis/química , Nanoestruturas/química , Compostos Organometálicos/química , Energia Solar , Espectroscopia de Ressonância de Spin Eletrônica , Modelos Moleculares , Conformação Molecular
9.
ACS Nano ; 4(7): 3921-6, 2010 Jul 27.
Artigo em Inglês | MEDLINE | ID: mdl-20527798

RESUMO

The development of molecular nanostructures plays a major role in emerging organic electronic applications, as it leads to improved performance and is compatible with our increasing need for miniaturization. In particular, nanowires have been obtained from solution or vapor phase and have displayed high conductivity or large interfacial areas in solar cells. In all cases however, the crystal structure remains as in films or bulk, and the exploitation of wires requires extensive postgrowth manipulation as their orientations are random. Here we report copper phthalocyanine (CuPc) nanowires with diameters of 10-100 nm, high directionality, and unprecedented aspect ratios. We demonstrate that they adopt a new crystal phase, designated eta-CuPc, where the molecules stack along the long axis. The resulting high electronic overlap along the centimeter length stacks achieved in our wires mediates antiferromagnetic couplings and broadens the optical absorption spectrum. The ability to fabricate ultralong, flexible metal phthalocyanine nanowires opens new possibilities for applications of these simple molecules.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA