Multi-band echo-planar spectroscopic imaging of hyperpolarized 13 C probes in a compact preclinical PET/MR scanner.

PURPOSE: Hyperpolarized (HP) 13 C MRI has enabled real-time imaging of specific enzyme-catalyzed metabolic reactions, but advanced pulse sequences are necessary to capture the dynamic, localized metabolic information. Herein we describe the design, implementation, and testing of a rapid and efficient HP 13 C pulse sequence strategy on a cryogen-free simultaneous positron emission tomography/MR molecular imaging platform with compact footprint. METHODS: We developed an echo planar spectroscopic imaging pulse sequence incorporating multi-band spectral-spatial radiofrequency (SSRF) pulses for spatially coregistered excitation of 13 C metabolites with differential individual flip angles. Excitation profiles were measured in phantoms, and the SSRF-echo planar spectroscopic imaging sequence was tested in rats in vivo and compared to conventional echo planar spectroscopic imaging. The new sequence was applied for 2D dynamic metabolic imaging of HP [1-13 C]pyruvate and its molecular analog [1-13 C] α -ketobutyrate at a spatial resolution of 5 mm × 5 mm × 20 mm and temporal resolution of 4 s. We also obtained simultaneous 18 F-fluorodeoxyglucose positron emission tomography data for comparison with HP [1-13 C]pyruvate data acquired during the same scan session. RESULTS: Measured SSRF excitation profiles corresponded well to Bloch simulations. Multi-band SSRF excitation facilitated efficient sampling of the multi-spectral kinetics of [1-13 C]pyruvate and [1-13 C] α - ketobutyrate . Whereas high pyruvate to lactate conversion was observed in liver, corresponding reduction of α -ketobutyrate to [1-13 C] α -hydroxybutyrate ( α HB) was largely restricted to the kidneys and heart, consistent with the known expression pattern of lactate dehydrogenase B. CONCLUSION: Advanced 13 C SSRF imaging approaches are feasible on our compact positron emission tomography/MR platform, maximizing the potential of HP 13 C technology and facilitating direct comparison with positron emission tomography.

Catch-up alveolarization in ex-preterm children: evidence from (3)He magnetic resonance.

RATIONALE: Histologic data from fatal cases suggest that extreme prematurity results in persisting alveolar damage. However, there is new evidence that human alveolarization might continue throughout childhood and could contribute to alveolar repair. OBJECTIVES: To examine whether alveolar damage in extreme-preterm survivors persists into late childhood, we compared alveolar dimensions between schoolchildren born term and preterm, using hyperpolarized helium-3 magnetic resonance. METHODS: We recruited schoolchildren aged 10-14 years stratified by gestational age at birth (weeks) to four groups: (1) term-born (37-42 wk; n = 61); (2) mild preterm (32-36 wk; n = 21); (3) extreme preterm (<32 wk, not oxygen dependent at 4 wk; n = 19); and (4) extreme preterm with chronic lung disease (<32 wk and oxygen dependent beyond 4 wk; n = 18). We measured lung function using spirometry and plethysmography. Apparent diffusion coefficient, a surrogate for average alveolar dimensions, was measured by helium-3 magnetic resonance. MEASUREMENTS AND MAIN RESULTS: The two extreme preterm groups had a lower FEV1 (P = 0.017) compared with term-born and mild preterm children. Apparent diffusion coefficient was 0.092 cm(2)/second (95% confidence interval, 0.089-0.095) in the term group. Corresponding values were 0.096 (0.091-0.101), 0.090 (0085-0.095), and 0.089 (0.083-0.094) in the mild preterm and two extreme preterm groups, respectively, implying comparable alveolar dimensions across all groups. Results did not change after controlling for anthropometric variables and potential confounders. CONCLUSIONS: Alveolar size at school age was similar in survivors of extreme prematurity and term-born children. Because extreme preterm birth is associated with deranged alveolar structure in infancy, the most likely explanation for our finding is catch-up alveolarization.

A preparation pulse for fast steady state approach in Actual Flip angle Imaging.

BACKGROUND: Actual Flip angle Imaging (AFI) is a sequence used for B1 mapping, also embedded in the Variable flip angle with AFI for simultaneous estimation of T1 , B1 and equilibrium magnetization. PURPOSE: To investigate the design of a preparation module for AFI to allow a fast approach to steady state (SS) without requiring the use of dummy acquisitions. METHODS: The features of a preparation module with a B1 insensitive adiabatic pulse, spoiler gradients, and a recovery time T r e c $T_{rec}$ were studied with simulations and validated via experiments and acquired with different k-space traveling strategies. The robustness of the flip angle of the preparation pulse on the acquired signal is studied. RESULTS: When a 90° adiabatic pulse is used, the forthcoming T r e c $T_{rec}$ can be expressed as a function of repetition times and AFI flip angle only as TR 1 ( n + cos α ) / ( 1 - cos 2 α ) $\mathrm{TR_1}(n+\cos \alpha )/(1-\cos ^2\alpha )$ , where n represents the ratio between the two repetition times of AFI. The robustness of the method is demonstrated by showing that using the values further away from 90° still allows for a faster approach to SS than the use of dummy pulses. CONCLUSIONS: The preparation module is particularly advantageous for low flip angles, as well as for AFI sequences that sample the center of the k-space early in the sequence, such as centric ordering acquisitions, and for ultrafast EPI-based AFI methods, thus allowing to reduce scanner overhead time.

Alveolarization continues during childhood and adolescence: new evidence from helium-3 magnetic resonance.

RATIONALE: The current hypothesis that human pulmonary alveolarization is complete by 3 years is contradicted by new evidence of alveolarization throughout adolescence in mammals. OBJECTIVES: We reexamined the current hypothesis using helium-3 ((3)He) magnetic resonance (MR) to assess alveolar size noninvasively between 7 and 21 years, during which lung volume nearly quadruples. If new alveolarization does not occur, alveolar size should increase to the same extent. METHODS: Lung volumes were measured by spirometry and plethysmography in 109 healthy subjects aged 7-21 years. Using (3)HeMR we determined two independent measures of peripheral airspace dimensions: apparent diffusion coefficient (ADC) of (3)He at FRC (n = 109), and average diffusion distance of helium (X(rms)) by q-space analysis (n = 46). We compared the change in these parameters with lung growth against a model of lung expansion with no new alveolarization. MEASUREMENTS AND MAIN RESULTS: ADC increased by 0.19% for every 1% increment in FRC (95% confidence interval [CI], 0.13-0.25), whereas the expected change in the absence of neoalveolarization is 0.41% (95% CI, 0.31-0.52). Similarly, increase of (X(rms)) with FRC was significantly less than the predicted increase in the absence of neoalveolarization. The number of alveoli is estimated to increase 1.94-fold (95% CI, 1.64-2.30) across the age range studied. CONCLUSIONS: Our observations are best explained by postulating that the lungs grow partly by neoalveolarization throughout childhood and adolescence. This has important implications: developing lungs have the potential to recover from early life insults and respond to emerging alveolar therapies. Conversely, drugs, diseases, or environmental exposures could adversely affect alveolarization throughout childhood.

A Practical Quality Assurance Procedure for Data Acquisitions in Preclinical Simultaneous PET/MR Systems.

The availability of preclinical simultaneous PET/MR imaging systems has been increasing in recent years. Therefore, this technique is progressively moving from the hands of pure physicists towards those of scientists more involved in pharmacology and biology. Unfortunately, these combined scanners can be prone to artefacts and deviation of their characteristics under the influence of external factors or mutual interference between subsystems. This may compromise the image quality as well as the quantitative aspects of PET and MR data. Hence, quality assurance is crucial to avoid loss of animals and experiments. A possible risk to the acceptance of quality control by preclinical teams is that the complexity and duration of this quality control are increased by the addition of MR and PET tests. To avoid this issue, we have selected over the past 5 years, simple tests that can be easily and quickly performed each day before starting an animal PET/MR acquisition. These tests can be performed by the person in charge of the experiment even if this person has a limited expertise in instrumentation and performance evaluation. In addition to these daily tests, other tests are suggested for an advanced system follow-up at a lower frequency. In the present paper, the proposed tests are sorted by periodicity from daily to annual. Besides, we have selected test materials that are available at moderate cost either commercially or through 3D printing.

Blending of the Thermodynamically Incompatible Polyvinyl Chloride and High-Pressure Polyethylene Polymers Using a Supercritical Fluid Anti-Solvent Method (SEDS) Dispersion Process.

The experimental solubility data of polyvinyl chloride (PVC) and high-pressure polyethylene (HPPE) in organic solvents (toluene, dichloromethane, and chloroform) at temperatures ranging from 308.15 to 373.15 K at atmospheric pressure are reported in the present paper. The solubility of the polymers (PVC and HPPE) in organic solvents (toluene, dichloromethane, and chloroform) was studied at temperatures between 298 and 373 K. The supercritical SEDS dispersion of PVC and HPPE polymer blends at pressures between 8.0 and 25 MPa and at temperatures from 313 to 333 K are reported in the present work. The kinetics of crystallization and phase transformation in polymer blends obtained by blending in a melt, and using the supercritical SEDS method, have been studied. The effect of the HPPE/PVC ratio on the thermal and mechanical characteristics of the polymer blends has been studied. For all studied polymer blends and pure polymers obtained using the SEDS method, the heat of fusion ΔfusH exceeds the values obtained by blending in the melt by 1.5 to 5) times. The heat of fusion of the obtained polymer blends is higher than the additive value; therefore, the degree of crystallinity is higher, and this effect persists after heat treatment. The relative elongation decreases for all polymer blends, but their tensile strength increases significantly.

Quantification of Mouse Heart Left Ventricular Function, Myocardial Strain, and Hemodynamic Forces by Cardiovascular Magnetic Resonance Imaging.

Mouse models have contributed significantly to understanding genetic and physiological factors involved in healthy cardiac function, how perturbations result in pathology, and how myocardial diseases may be treated. Cardiovascular magnetic resonance imaging (CMR) has become an indispensable tool for a comprehensive in vivo assessment of cardiac anatomy and function. This protocol shows detailed measurements of mouse heart left ventricular function, myocardial strain, and hemodynamic forces using 7-Tesla CMR. First, animal preparation and positioning in the scanner are demonstrated. Survey scans are performed for planning imaging slices in various short- and long-axis views. A series of prospective ECG-triggered short-axis (SA) movies (or CINE images) are acquired covering the heart from apex to base, capturing end-systolic and end-diastolic phases. Subsequently, single-slice, retrospectively gated CINE images are acquired in a midventricular SA view, and in 2-, 3-, and 4-chamber views, to be reconstructed into high-temporal resolution CINE images using custom-built and open-source software. CINE images are subsequently analyzed using dedicated CMR image analysis software. Delineating endomyocardial and epicardial borders in SA end-systolic and end-diastolic CINE images allows for the calculation of end-systolic and end-diastolic volumes, ejection fraction, and cardiac output. The midventricular SA CINE images are delineated for all cardiac time frames to extract a detailed volume-time curve. Its time derivative allows for the calculation of the diastolic function as the ratio of the early filling and atrial contraction waves. Finally, left ventricular endocardial walls in the 2-, 3-, and 4-chamber views are delineated using feature-tracking, from which longitudinal myocardial strain parameters and left ventricular hemodynamic forces are calculated. In conclusion, this protocol provides detailed in vivo quantification of the mouse cardiac parameters, which can be used to study temporal alterations in cardiac function in various mouse models of heart disease.

Performance Evaluation and Compatibility Studies of a Compact Preclinical Scanner for Simultaneous PET/MR Imaging at 7 Tesla.

We present the design and performance of a new compact preclinical system combining positron emission tomography (PET) and magnetic resonance imaging (MRI) for simultaneous scans. The PET contains sixteen SiPM-based detector heads arranged in two octagons and covers an axial field of view (FOV) of 102.5 mm. Depth of interaction effects and detector's temperature variations are compensated by the system. The PET is integrated in a dry magnet operating at 7 T. PET and MRI characteristics were assessed complying with international standards and interferences between both subsystems during simultaneous scans were addressed. For the rat size phantom, the peak noise equivalent count rates (NECR) were 96.4 kcps at 30.2 MBq and 132.3 kcps at 28.4 MBq respectively with and without RF coil. For mouse, the peak NECR was 300.0 kcps at 34.5 MBq and 426.9 kcps at 34.3 MBq respectively with and without coil. At the axial centre of the FOV, spatial resolutions expressed as full width at half maximum / full width at tenth maximum (FWHM/FWTM) ranged from 1.69/3.19 mm to 2.39/4.87 mm. The peak absolute sensitivity obtained with a 250-750 keV energy window was 7.5% with coil and 7.9% without coil. Spill over ratios of the NEMA NU4-2008 image quality (NEMA-IQ) phantom ranged from 0.25 to 0.96 and the percentage of non-uniformity was 5.7%. The image count versus activity was linear up to 40 MBq. The principal magnetic field variation was 0.03 ppm/mm over 40 mm. The qualitative and quantitative aspects of data were preserved during simultaneous scans.

Performance evaluation of a PET insert for preclinical MRI in stand-alone PET and simultaneous PET-MRI modes.

BACKGROUND: This study aimed to evaluate the performance of a preclinical PET insert in three configurations: as a stand-alone unit outside the MRI bore, inside the bore of a cryogen-free 3T MRI and, finally, while performing simultaneous PET/MRI studies. METHODS: The PET insert consists of two rings of six detectors, each detector comprising 8 × 12 SiPMs reading out dual offset layers of pixelated LYSO crystals with a 1.4-mm pitch. The inner diameter is 60 mm, transaxial field of view (FoV) 40 mm and axial FoV 98 mm. Evaluation was based on NEMA NU 4-2008 guidelines with appropriate modifications. Spatial resolution and sensitivity were measured inside and outside the MR bore. Image quality, count rate and quantitative performance were measured in all three configurations. The effect of temperature stability on PET sensitivity during fast spin echo sequences was also evaluated. B0 field homogeneity and T1 and T2 relaxation times were measured using a water-filled phantom, with and without simultaneous PET operation. Finally, PET and MRI scans of a mouse injected with 10 MBq [18F]NaF and a mouse injected with 16 MBq [18F]FDG were performed in sequential and simultaneous modes. RESULTS: Peak absolute sensitivity was 10.15% with an energy window of 250-750 keV. Absolute sensitivity values outside and inside the MR bore with MR idle agreed to within 0.1%. Outside the MR bore, spatial resolution was 1.21/1.59 mm FWHM (radial/tangential) 5 mm from the centre of the FoV which compared well with 1.19/1.26 mm FWHM inside the MR bore. There were no substantial differences between all three scan configurations in terms of peak NEC rate (175 kcps at 17 MBq), scatter or random fractions. Uniformity and recovery coefficients were also consistent between scanning modes. B0 field homogeneity and T1 and T2 relaxation times were unaltered by the presence of the PET insert. No significant differences were observed between sequential and simultaneous scans of the animals. CONCLUSIONS: We conclude that the performance of the PET insert and MRI system is not significantly affected by the scanning mode.

Mapping vitamin B6 metabolism by hydrazoCEST magnetic resonance imaging.

A new CEST-MRI contrast agent, 2-HYNIC, capable of sensing aromatic aldehydes is reported. Pyridoxal 5'-phosphate, a key Vitamin B6 metabolite necessary for >140 biotransformations was mapped by CEST-MRI in vitro and in vivo in lung cancer. 2-HYNIC provided access to this key biomarker associated with a variety of human diseases.

Development, integration and use of an ultra-high-strength gradient system on a human-size 3 T magnet for small animal MRI.

This study aims to integrate an ultra-high-strength gradient coil system on a clinical 3 T magnet and demonstrate its preclinical imaging capabilities. Dedicated phantoms were used to qualitatively and quantitatively assess the performance of the gradient system. Advanced MR imaging sequences, including diffusion tensor imaging (DTI) and quantitative susceptibility mapping (QSM), were implemented and executed on an ex vivo specimen as well as in vivo rats. The DTI and QSM results on the phantom agreed well with those in the literature. Furthermore, studies on ex vivo specimens have demonstrated the applicability of DTI and QSM on our system to probe microstructural changes in a mild traumatic brain injury rat model. The feasibility of in vivo rat DTI was also demonstrated. We showed that the inserted ultra-high-strength gradient coil was successfully integrated on a clinically used magnet. After careful tuning and calibration, we verified the accuracy and quantitative preclinical imaging capability of the integrated system in phantom and in vivo rat brain experiments. This study can be essential to establish dedicated animal MRI platform on clinical MRI scanners and facilitate translational studies at clinical settings.

Structure, stability, and ligand exchange of copper(II) complexes with oxidized glutathione.

Formation constants and structures of copper(II) complexes with oxidized glutathione (L) have been determined by computer modelling of spectrophotometric and NMR relaxation measurements data over a wide range of pH (1-13) and metal and ligand concentrations in aqueous KNO(3) (1M) at 298K. Among 11 found complexes, four forms were characterized for the first time. Based on a comparison of thermodynamic, relaxation, and optical and EPR spectroscopy parameters the structural conclusions were made. In particular, the CuLH(2) and CuLH(-) complexes both contain two isomers which are similar to mono- and bis-aminoacid copper(II) complexes. In the Cu(2)L and Cu(3)L(2)(2-) species one of the copper atoms is bound only with the carboxylate or carbonyl groups and the others are coordinated similarly to aminoacid chelates. Along with the last, in Cu(2)LH(-2)(2-) two bridging OH(-) groups in one isomer or two chelate rings including deprotonated peptide nitrogen and glycinyl carboxylate oxygen in another are also present. In Cu(3)L(2)H(-4)(6-) the mixed variant of coordination between CuL(2-) (CuN(2)O(2)) and Cu(2)LH(-4)(4-)(CuN(3)O) is realized. The structures of polynuclear complexes have been optimized in density functional theory computations. Rate constants of ligand exchange reactions of Cu(LH)(2)(4-) and CuL(2)(6-) with participation of the LH(3-) and L(4-) forms were determined for the first time. Factors determining rates of these processes have been revealed and their proceeding by associative substitution mechanism shown.

Complex formation, chemical exchange, species structure, and stereoselective effects in the copper(II)-L/DL-histidine systems.

The formation of copper(II) complexes with L- and DL-histidine (HisH) has been studied by means of pH-potentiometry and spectrophotometry over a wide range of pH (2-14), ligand-to-metal ratio (1 : 1-15 : 1), and temperature (15-55 °C) in aqueous solutions with 1.0 mol dm(-3) KNO(3) as background. Formation constants and spectral characteristics of 13 complex types were found. Fine stereoselective effects have been detected with preferential coordination of two ligands with identical configuration in Cu(His)(HisH)(+) and opposite configuration in Cu(His)(2). The stereoselective effect for Cu(His)(HisH)(+) is explained by hydrogen bond formation between the carboxyl and imidazolyl groups of neighboring ligands at cis-arrangement of amino groups (3N(eq)-form). The opposite sign of stereoselective effect for Cu(His)(2) is derived from favourable axial coordination of the imidazole group in meso-form with cis-structure (3N(eq)N(ax)-form). A significant tetrahedral distortion was revealed for the first time in the prevalent cis-isomer of the Cu(L-His)(2) 4N(eq)-form. These findings were confirmed by EPR data and DFT computations at the B3LYP/TZVP level. The prevalence of cis-isomers for these complexes has been assigned to the rather strong trans effect of the amino groups. The structures of other detected complexes are briefly discussed on the basis of spectroscopic data. Chemical exchange reactions in the copper(II)-L/DL-hishidine systems have been investigated by the NMR relaxation of water protons. A unique proton exchange reaction with short-term proton dissociation from the coordinated imidazolyl group catalyzed by hydroxide ion was characterised for the first time. The discovered enantioselective effects in the ligand exchange reactions between Cu(His)(2) and HisH or His(-) species were attributed to the associative substitution mechanism.