Mussel-Inspired Polynorepinephrine/MXene-Based Magnetic Nanohybrid for Electromagnetic Interference Shielding in X-Band and Strain-Sensing Performance.

The current work delivers preparation of MXene-based magnetic nanohybrid coating for flexible electronic applications. Herein, we report carbon dot-triggered photopolymerized polynorepinepherene (PNE)-coated MXene and iron oxide hybrid deposited on the cellulose microporous membrane via a vacuum-assisted filtration strategy. The surface morphologies have been monitored by scanning electron microscopy analysis, and the coating thickness was evaluated by the gallium-ion-based focused ion beam method. Coated membranes have been tested against uniaxial tensile stretching and assessed by their fracture edges in order to assure flexibility and mechanical strength. Strain sensors and electromagnetic interference (EMI) shielding have both been tested on the material because of its electrical conductivity. The bending strain sensitivity has been stringent because of their fast 'rupture and reform' percolation network formation on the coated surface. Increased mechanical strength, solvent tolerance, cyclic deformation tolerance, and EMI shielding performance were achieved by decreasing interstitial membrane porosity. Considering a possible application, the membrane also has been tested against simulated static and dynamic water flow conditions that could infer its excellent robustness which also has been confirmed by elemental analysis via ICP-MS. Thus, as of nurturing the works of the literature, it could be believed that the developed material will be an ideal alternative of flexible lightweight cellulose for versatile electronic applications.

Immobilization of Heteroatom-Doped Carbon Dots onto Nonpolar Plastics for Antifogging, Antioxidant, and Food Monitoring Applications.

This work presents the facile synthesis of heteroatom-doped fluorescent carbon quantum dots (C-dots), which could serve as an antioxidant. Herein, nitrogen, phosphorous, and sulfur codoped carbon dots (NPSC-dots) have been synthesized by a single-step hydrothermal strategy. Owing to the radical scavenging activity of the NPSC-dots, they were tested against several methods as well as in practical applications. The antioxidant ability of the NPSC-dots was efficiently utilized on plastic films by coating with these NPSC-dots. For the very first time, NPSC-dots were immobilized onto nonpolar plastic films (polypropylene) via photochemical covalent grafting to extend the shelf life of food items or storage without affecting the quality of plastic films. The NPSC-dot-coated PP film with negligible deterioration of transparency was extensively studied using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), contact angle measurement, and thermogravimetric analysis (TGA). The fluorescent character, antioxidant ability, and durability under different solvent systems of the coated film were examined. Also, the coated films were extensively and rigorously evaluated against simulated drastic environmental conditions to ensure the durability and antifogging application.

Sonochemically Prepared BSA Microspheres as Adsorbents for the Removal of Organic Pollutants from Water.

This work investigates, for the first time, the application of sonochemically prepared bovine serum albumin (BSA) microspheres (BSAMS) as adsorbents of industrial organic pollutant dyes, such as rhodamine B (RhB), rhodamine 6G (Rh6G), and methylene blue (MB). These dyes also serve as model compounds for other organic pollutants such as bisphenol A and 2-nitrophenol. Adsorption kinetics of the dyes by the BSAMS was studied using pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. It was found that RhB follows PFO, with an adsorption capacity, qe,cal, of 7.9 mg/g, which was closer to the experimental adsorption capacity of qe,exp. of 7.6 mg/g. However, MB and Rh6G were controlled by PSO kinetics, with a qe,cal of 5.6 mg/g for MB and 6.6 mg/g for Rh6G, closer to the experimental adsorption capacity of 5.7 and 6.4 mg/g, respectively. The intraparticle diffusion (ID) model applied to the three dyes indicated multi-linearity with ID as the rate-limiting step in the adsorption process. Furthermore, the adsorption equilibria for each of the organic pollutants were studied through various isotherm models such as Langmuir, Freundlich, Temkin, and Halsey, which indicated physical interaction between the BSAMS and the dye pollutants, thus suggesting the applicability of the BSAMS as pollutant adsorbent materials. It was found that the BSAMS can effectively remove RhB, MB, and Rh6G from wastewater with efficiencies of 95.5, 83.3, and 97.9%, respectively.

In vitro copper oxide nanoparticle toxicity on intestinal barrier.

The use of CuO nanoparticles (NPs) has increased greatly and their potential effects on human health need to be investigated. Differentiated Caco-2 cells were treated from the apical (Ap) and the basolateral (Bl) compartment with different concentrations (0, 10, 50 and 100 µg/mL) of commercial or sonochemically synthesized (sono) CuO NPs. Sono NPs were prepared in ethanol (CuOe) or in water (CuOw), obtaining CuO NPs differing in size and shape. The effects on the Caco-2 cell barrier were assessed via transepithelial electrical resistance (TEER) evaluation just before and after 1, 2 and 24 hours of exposure and through the analysis of cytokine release and biomarkers of oxidative damage to proteins after 24 hours. Sono CuOe and CuOw NPs induced a TEER decrease with a dose-dependent pattern after Bl exposure. Conversely, TEER values were not affected by the Ap exposure to commercial CuO NPs and, concerning the Bl exposure, only the lowest concentration tested (10 µg/mL) caused a TEER decrease after 24 hours of exposure. An increased release of interleukin-8 was induced by sono CuO NPs after the Ap exposure to 100 µg/mL and by sono and commercial CuO after the Bl exposure to all the concentrations. No effects of commercial and sono CuO NPs on interleukin-6 (with the only exception of 100 µg/mL Bl commercial CuO) and tumor necrosis factor-α release were observed. Ap treatment with commercial and CuOw NPs was able to induce significant alterations on specific biomarkers of protein oxidative damage (protein sulfhydryl group oxidation and protein carbonylation).

Making salty cucumbers and honeyed apples by applying the sonochemical method.

Sonochemistry was applied in the last few years for coating surfaces of various substrates for imparting desired properties to the surface. In the current paper the coating of cucumbers with NaCl nanoparticles and apples with honey nanoparticles was accomplished by applying the sonochemical method. In both coating the nanoparticles were deposited from aqueous solutions. The products were characterized by Inductively coupled plasma, Dynamic light scattering, Scanning electron microscopy, and Nuclear magnetic resonance.

Silica-Supported Nitrogen-Enriched Porous Benzimidazole-Linked and Triazine-Based Polymers for the Adsorption of CO2.

Two crystalline and five amorphous benzimidazole polymers (BINP) were synthesized and conjugated to porous silica via amine and aldehyde-based materials by a simple reflux procedure. The resulting polymers were subject to thermal analysis for monitoring and quantification of the adsorption and desorption of CO2. All the polymers were capable of adsorbing CO2 from a flowing stream of only 80 mL/min at 25 °C. The adsorbed CO2 onto the polymers were effectively desorbed at room temperature, illustrating the potential application of such polymers for repeated adsorption/desorption of CO2. The CO2 adsorption capacities of these polymers were dependent upon their nitrogen content, specific surface area, and pore size. The available nitrogen atoms for binding to the carbon of CO2 via tetrel bonds also plays an important role in the capture of this gas. Minimal and much lower CO2 adsorption was also noted with two crystalline polymers, compared to the five amorphous counterparts. Intermolecular hydrogen bonding and π-π interaction effectively prevented the polymer N sites of the crystalline polymers from interacting with polarized CO2 molecules.

Antibacterial and physical properties of a novel sonochemical-assisted Zn-CuO contact lens nanocoating.

PURPOSE: This work examined the antibacterial and physical effects of a novel Zn-CuO nanocoating applied on a silicone hydrogel contact lens. METHODS: Zn-CuO coating of PureVision balafilcon-A soft contact lenses (Bausch&Lomb, Rochester, NY) was performed by sonochemical deposition using a high-intensity ultrasonic horn. Non-coated PureVision lenses served as a control in all experiments. Adhesion assays for P. aerueginosa and S. epidermidis to the coated lenses were performed to identify the minimal coating concentration which still possessed antibacterial activity. Lens water content, oxygen transfer light transfer, leaching, and electron microscopy studies were performed using this concentration. RESULTS: Coated lenses showed 3-5 log reductions in adhesion of both species. The lowest tested coating concentration of 0.02 wt% led to a log reduction of 3.25 ± 1.25 of P. aeruginosa CFU/lens (P = 0.007) and a log reduction of 4.37 ± 0.75 of S. epidermidis (p = 0.0007). Using this coating concentration, water content (36%, 33.6%), oxygen transfer (87.22 ± 10.96, 92.18 ± 2.38, × 10-11(cm2/s)(mlO2)/(ml × mmHg)), p = 0.12), and light transfer properties did not differ significantly between the coated and the control contact lenses. In the range of 380-780 nm wavelength, the coated lenses transmitted 96.47 ± 1.52% while the control lenses transmitted 97.36 ± 1.35%. The corresponding values for the range of 300-380 nm wavelength were 79.343 ± 8.754 and 80.169 ± 1.35. Leaching studies for 0.5 mM coated lenses have demonstrated the excellent stability of the coating with the release of only 0.005% of the coating after 1 week of exposure to the test solution. CONCLUSION: Sonochemical-assisted nanocoating of contact lenses showed significant and consistent antibacterial activity while preserving the basic properties of a silicone hydrogel contact lens.

Cytotoxic and proinflammatory responses induced by ZnO nanoparticles in in vitro intestinal barrier.

ZnO nanoparticles (NPs) are widely used nowadays, thus the gastrointestinal exposure to ZnO NPs is likely to be relevant and the effects on the intestinal barrier should be investigated. Polarized Caco-2 cells were exposed from the apical (Ap) and basolateral (Bl) compartments to increasing concentrations (0, 10, 50 and 100 µg/mL) of sonochemical (sono) and commercial ZnO NPs. The transepithelial electrical resistance (TEER), cell viability, proinflammatory cytokine release and presence of protein oxidative damage were evaluated after exposure. TEER was not significantly affected by Ap exposure to either sono or commercial ZnO NPs at any tested concentrations. After Bl exposure to sono ZnO NPs (all the concentrations) and to 100 µg/mL of commercial ZnO NPs TEER was decreased (P < 0.05). Ap and Bl exposure to 100 µg/mL sono ZnO NPs and Ap exposure to 50 µg/mL commercial ZnO NPs induced a significant (P < 0.05) release of interleukin-6. A significant (P < 0.05) release of interleukin-8 was observed after Ap exposure to ZnO NPs at 100 µg/mL and after Bl exposure to sono ZnO NPs at 100 µg/mL. Ap or Bl exposure to sono or commercial ZnO NPs did not affect tumour necrosis factor-alpha secretion or protein sulphydryl oxidation. In conclusion, the ZnO NP exposure from the Ap compartment appeared almost safe, while the exposure through the basal compartment appeared to be more hazardous and the different NP size and crystallinity seem to affect the mode of action, but further studies are necessary to elucidate better these toxicity mechanisms.

Graphene-Based "Hot Plate" for the Capture and Destruction of the Herpes Simplex Virus Type 1.

The study of graphene-based antivirals is still at a nascent stage and the photothermal antiviral properties of graphene have yet to be studied. Here, we design and synthesize sulfonated magnetic nanoparticles functionalized with reduced graphene oxide (SMRGO) to capture and photothermally destroy herpes simplex virus type 1 (HSV-1). Graphene sheets were uniformly anchored with spherical magnetic nanoparticles (MNPs) of varying size between ∼5 and 25 nm. Fourier-transform infrared spectroscopy (FT-IR) confirmed the sulfonation and anchoring of MNPs on the graphene sheets. Upon irradiation of the composite with near-infrared light (NIR, 808 nm, 7 min), SMRGO (100 ppm) demonstrated superior (∼99.99%) photothermal antiviral activity. This was probably due to the capture efficiency, unique sheet-like structure, high surface area, and excellent photothermal properties of graphene. In addition, electrostatic interactions of MNPs with viral particles appear to play a vital role in the inhibition of viral infection. These results suggest that graphene composites may help to combat viral infections including, but not only, HSV-1.

Airborne Nanoparticle Release and Toxicological Risk from Metal-Oxide-Coated Textiles: Toward a Multiscale Safe-by-Design Approach.

Nano metal oxides have been proposed as alternatives to silver (Ag) nanoparticles (NPs) for antibacterial coatings. Here, cotton and polyester-cotton fabrics were sonochemically coated with zinc oxide (ZnO) and copper oxide (CuO) NPs. By varying the reaction solvent (water or ethanol), NPs with different sizes and shapes were synthesized. The cytotoxic and pro-inflammatory effects of studied NPs were investigated in vitro in human alveolar epithelial A549 and macrophage-like THP1 cells. To understand the potential respiratory impact of the NPs, the coated textiles were subjected to the abrasion tests, and the released airborne particles were measured. A very small amount of the studied metal oxides NPs was released from abrasion of the textiles coated by the ethanol-based sonochemical process. The release from the water-based coating was comparably higher. Lung and immune cells viability decreased after 24 h of exposure only at the highest studied NPs concentration (100 µg/mL). Different from the ZnO NPs, both formulations of CuO NPs induced IL-8 release in the lung epithelial cells already at subtoxic concentrations (1-10 µg/mL) but not in immune cells. All of the studied NPs did not induce IL-6 release by the lung and immune cells. Calculations revealed that the exposures of the NPs to human lung due to the abrasion of the textiles were lower or comparable to the minimum doses in the cell viability tests (0.1 µg/mL), at which acute cytotoxicity was not observed. The results alleviate the concerns regarding the potential risk of these metal oxide NPs in their applications for the textile coating and provide insight for the safe-by-design approach.

Detection of human neutrophil elastase (HNE) on wound dressings as marker of inflammation.

Chronic wound fluids have elevated concentration of human neutrophil elastase (HNE) which can be used as inflammation/infection marker. Our goal is to develop functional materials for fast diagnosis of wound inflammation/infection by using HNE as a specific marker. For that, fluorogenic peptides with a HNE-specific cleavage sequence were incorporated into traditional textile dressings, to allow real-time detection of the wound status. Two different fluorogenic approaches were studied in terms of intensity of the signal generated upon HNE addition: a fluorophore 7-amino-4-trifluormethylcoumarin (AFC) conjugated to a HNE-specific peptide and two fluorophore/quencher pairs (FAM/Dabcyl and EDANS/Dabcyl) coupled to a similar peptide as a Förster resonance energy transfer (FRET) strategy. Also, two immobilization methods were tested: sonochemistry immobilization onto a cotton bandage and glutaraldehyde (GTA)-assisted chemical crosslinking onto a polyamide dressing. The immobilized fluorogenic AFC peptide showed an intense fluorescence emission in the presence of HNE. HNE also induced an enhanced fluorescent signal with the EDANS/Dabcyl FRET peptide which showed to be a more sensitive and effective strategy than the AFC peptide. However, its chemical immobilization onto the polyamide dressing greatly decreased its detection, mainly due to the more difficult access of the enzyme to the cleavage sequence of the immobilized peptide. After optimization of the in situ immobilization, it will be possible to use these fluorescence-functionalized dressings for an effective and specific monitoring of chronic wounds by simply using a portable ultraviolet (UV) light source. We envision that the development of this point-of-care medical device for wound control will have a great impact on patient's life quality and reduction of costs on health care system.

Dispersion of Polymers in Metallic Gallium.

This work examines the concept of dispersing polymers in metals. Herein, this was mainly studied with molten gallium, in which 5-18 wt % of various short-chain polymers were incorporated and mixed. The nature of the solidified products was examined by using X-ray diffraction, electron microscopy, UV/Vis, differential scanning calorimetry, and thermal gravimetric analyses. It was found that some polymers can be dispersed as small domains within molten metals to form a heterogeneous solid. The ability to dope Ga with large polymers opens a new avenue to electronic materials.

Escherichia coli and Pseudomonas aeruginosa eradication by nano-penicillin G.

The transformation of penicillin G into nano/micro-sized spheres (nanopenicillin) using sonochemical technology was explored as a novel tool for the eradication of Gram-negative bacteria and their biofilms. Known by its effectiveness only against Gram-positive microorganisms, the penicillin G spherization boosted the inhibition of the Gram-negative Pseudomonas aeruginosa 10-fold (from 0.3 to 3.0 log-reduction) and additionally induced 1.2 log-reduction of Escherichia coli growth. The efficient penetration of the spheres within a Langmuir monolayer sustained the theory that nanopenicillin is able to cross the membrane and reach the periplasmic space in Gram-negative bacteria where they inhibit the ß-lactam targets: the transferases that build the bacteria cell wall. Moreover, it considerably suppressed the growth of both bacterial biofilms on a medically relevant polystyrene surface, leaving majority of the adhered cells dead compared to the treatment with the non-processed penicillin G. Importantly, nanopenicillin was found innocuous towards human fibroblasts at the antibacterial-effective concentrations.

Bioethanol production from Ficus religiosa leaves using microwave irradiation.

A microwave assisted feasible process for the production of bioethanol from Ficus religiosa leaves was developed. Under the process conditions (8 min. microwave irradiation, 1 M HCl), 10.1 wt% glucose yield was obtained from the leaves. Microwave based hydrolysis process yielded higher glucose content (10.1 wt%) compared to the conventional hydrothermal process (4.1 wt%). Upon fermentation of the hydrolysate using Baker's yeast, 3 wt% (dry wt. basis) of bioethanol was produced.

NMR studies of DNA microcapsules prepared using sonochemical methods.

DNA molecules were recently converted using ultrasonic irradiation into microcapsules that can trap hydrophobic molecules in aqueous solution. These DNA microcapsules are capable of penetrating prokaryotic and eukaryotic cells, delivering drugs and transferring genetic information e.g. for protein expression into the host cells. DNA molecules of different sizes and structures can be assembled into spherical capsules, but to date, the interactions that hold them together in these large structural constructs are unknown. In the current study, capsules prepared from a 12 base double helix DNA were investigated using NMR spectroscopy. Solution NMR studies of the DNA emulsion reveal DNA molecules with a perturbed structure with a size similar to the precursor DNA based on diffusion NMR measurements. 2D NMR correlation measurements and chemical shift perturbation analysis show partial unzipping of AT base pairs in the centre of the modified duplex, freeing nucleoside bases to interact with other bases on other precursor molecules thereby facilitating aggregation. Slow tumbling of the microspheres renders them invisible in solution NMR spectra; therefore magic angle spinning NMR measurements are performed which provide limited evidence of the DNA in the microcapsule state.

Assessment of holocellulose for the production of bioethanol by conserving Pinus radiata cones as renewable feedstock.

Renewable and green energy sources are much sought. Bioethanol is an environmentally friendly transportation fuel. Pine cones from Pinus radiata were shown to be a potential feedstock for the production of bioethanol. Alkaline (NaOH) pretreatment was carried out to delignify the lignocellulosic material and generate holocellulose (72 wt. % yield). The pretreated biomass was hydrolysed using HCl as catalyst under microwave irradiation and hydrothermal conditions. Microwave irradiation was found to be better than the hydrothermal process. Microwave irradiation accelerated the hydrolysis of biomass (42 wt. % conversion) with the reaction conditions being 3 M HCl and 5 min of irradiation time. Interestingly, even the xylose, which is the major component of the hydrolyzate was found to be metabolized to ethanol using Baker's yeast (Saccharomyces cerevisiae) under the experimental conditions. 5.7 g of ethanol could be produced from 100 g of raw pine cones.

The sonochemical approach improves the CuO-ZnO/TiO(2) catalyst for WGS reaction.

The CuO-ZnO composite was deposited onto two kinds of titania supports, which are synthetic mesoporous TiO2 and commercial TiO2 P25 (Degussa), via the ultrasound assisted precipitation and incipient wetness impregnation (IWI) methods, respectively. The catalysts were tested for WGS reaction in the temperature range of 200-400 °C, and the best catalytic performance was achieved for the sonochemically prepared catalysts supported on the commercial TiO2 P25, which contains well crystallized anatase and rutile phases. Although the synthetic mesoporous TiO2 has a higher surface area, its textural structure is not stable under the reaction conditions, leading to gradual deactivation of the CuO-ZnO/TiO2 catalyst. It is found that the sonochemical preparation offers at least two advantages: (1) generation of mesopores on the catalyst surface and (2) doping of ZnO into the CuO phase. The doping of ZnO, particularly in the case of commercial TiO2 P25, provides high activity and extra stability to the active phase of Cu(0). These new findings provide new insights into the design and development of better heterogeneous catalysts for WGS reaction.

Protecting the Antibacterial Coating of Urinal Catheters for Improving Safety.

Catheter-associated urinary tract infections (CAUTI) are among the most common bacterial infections associated with prolonged hospitalization and increased healthcare expenditures. Despite recent advances in the prevention and treatment of these infections, there are still many challenges remaining, among them the creation of a durable catheter coating, which prevents bacterial biofilm formation. The current work reports on a method of protecting medical tubing endowed with antibiofilm properties. Silicone catheters coated sonochemically with ZnO nanoparticles (NPs) demonstrated excellent antibiofilm effects. Toward approval by the European Medicines Agency, it was realized that the ZnO coating would not withstand the regulatory requirements of avoiding dissolution for 14 days in artificial urine examination. Namely, after exposure to urine for 14 days, the coating amount was reduced by 90%. Additional coatings with either carbon or silica maintained antibiofilm activity against Staphylococcus aureus while resisting dissolution in artificial urine for 14 days (C- or SiO2-protected catheters exhibited only 29% reduction). HR-SEM images of the protected catheters indicate the presence of the ZnO coating as well as the protective layer. Antibiofilm activity of all catheters was evaluated both before and after exposure to artificial urine. It was shown that before artificial urine exposure, all coated catheters showed high antibiofilm properties compared to the uncoated control. Exposure of ZnO-coated catheters, without the protective layer, to artificial urine had a significant effect exhibited by the decrease in antibiofilm activity by almost 2 orders of magnitude, compared to unexposed catheters. Toxicity studies performed using a reconstructed human epidermis demonstrated the safety of the improved coating. Exposure of the epidermis to ZnO catheter extracts in artificial urine affects tissue viability compared with control samples, which was not observed in the case of ZnO NPs coating with SiO2 or C. We suggest that silica and carbon coatings confer some protection against zinc ions release, improving ZnO coating safety.

Eradication of multi-drug resistant bacteria by a novel Zn-doped CuO nanocomposite.

Zinc-doped copper oxide nanoparticles are synthesized and simultaneously deposited on cotton fabric using ultrasound irradiation. The optimization of the processing conditions, the specific reagent ratio, and the precursor concentration results in the formation of uniform nanoparticles with an average size of ≈30 nm. The antibacterial activity of the Zn-doped CuO Cu0.88Zn0.12O in a colloidal suspension or deposited on the fabric is tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) bacteria. A substantial enhancement of 10,000 times in the antimicrobial activity of the Zn-CuO nanocomposite compared to the pure CuO and ZnO nanoparticles (NPs) is observed after 10 min exposure to the bacteria. Similar activities are observed against multidrug-resistant bacteria (MDR), (i.e., Methicillin-resistant S. aureus and MDR E. coli) further emphasizing the efficacy of this composite. Finally, the mechanism for this enhanced antibacterial activity is presented.

Triangular core-shell ZnO@SiO2 nanoparticles.

Well packed! Core-shell nanostructures composed of ZnO particles encapsulated in an equilateral triangular SiO2 shell are reported for the first time. The quantum-confinement effects within the nanostructures can be used to tune their properties for optoelectronic applications.