A nitroaromatic cathode with an ultrahigh energy density based on six-electron reaction per nitro group for lithium batteries.

Organic electrode materials have emerged as promising alternatives to conventional inorganic materials because of their structural diversity and environmental friendliness feature. However, their low energy densities, limited by the single-electron reaction per active group, have plagued the practical applications. Here, we report a nitroaromatic cathode that performs a six-electron reaction per nitro group, drastically improving the specific capacity and energy density compared with the organic electrodes based on single-electron reactions. Based on such a reaction mechanism, the organic cathode of 1,5-dinitronaphthalene demonstrates an ultrahigh specific capacity of 1,338 mAh⋅g-1 and energy density of 3,273 Wh⋅kg-1, which surpass all existing organic cathodes. The reaction path was verified as a conversion from nitro to amino groups. Our findings open up a pathway, in terms of battery chemistry, for ultrahigh-energy-density Li-organic batteries.

Aligned Conjugated Polymer Nanofiber Networks in an Elastomer Matrix for High-Performance Printed Stretchable Electronics.

Conjugated polymer films are promising in wearable X-ray detection. However, achieving optimal film microstructure possessing good electrical and detection performance under large deformation via scalable printing remains challenging. Herein, we report bar-coated high-performance stretchable films based on a conjugated polymer P(TDPP-Se) and elastomer SEBS blend by optimizing the solution-processing conditions. The moderate preaggregation in solution and prolonged growth dynamics from a solvent mixture with limited dissolving capacity is critical to forming aligned P(TDPP-Se) chains/crystalline nanofibers in the SEBS phase with enhanced π-π stacking for charge transport and stress dissipation. The film shows a large elongation at break of >400% and high mobilities of 5.29 cm2 V-1 s-1 at 0% strain and 1.66 cm2 V-1 s-1 over 500 stretch-release cycles at 50% strain, enabling good X-ray imaging with a high sensitivity of 1501.52 µC Gyair-1 cm-2. Our work provides a morphology control strategy toward high-performance conjugated polymer film-based stretchable electronics.

Thienoisoindigo-Based Conjugated Polymers Synthesized by Direct Arylation Polycondensation.

A series of thienoisoindigo (TIG)-based conjugated polymers (CPs) with high molecular weights are synthesized by direct arylation polycondensation (DArP) by using TIG derivatives as CBr monomer and multi-halogenated thiophene derivatives, i.e., (E)-1,2-bis(3,4-difluorothien-2-yl)ethene (4FTVT), (E)-1,2-bis(3,4-dichlorothien-2-yl)ethene (4ClTVT), 3,3',4,4'-tetrafluoro-2,2'-bithiophene (4FBT), and 3,3',4,4'-tetrachloro-2,2'-bithiophene (4ClBT), as CH monomers. Density functional theory (DFT) calculations reveal the high selectivity between α-CH bonds in 4FTVT, 4ClTVT, 4FBT, and 4ClBT and ß-CH bonds in TIG CBr monomer. All four resulting CPs exhibit low optical bandgaps of ca. 1.20 eV and ambipolar transport characteristics with both electron and hole mobility above 0.1 cm2  V-1  s-1 as elaborated with organic thin-film transistors (OTFTs). The polymer TIG-4FTVT delivers the best device performance. With this polymer, n-channel OTFTs with electron mobility up to 1.67 cm2  V-1  s-1 and p-channel OTFTs with hole mobility up to 0.62 cm2  V-1  s-1 are fabricated by modifying source/drain electrodes with polyethylenimine ethoxylated (PEIE) and MoO3 , respectively, to selectively inject electrons and holes.

Universal Design and Efficient Synthesis for High Ambipolar Mobility Emissive Conjugated Polymers.

High ambipolar mobility emissive conjugated polymers (HAME-CPs) are perfect candidates for organic optoelectronic devices, such as polymer light emitting transistors. However, due to intrinsic trade-off relationship between high ambipolar mobility and strong solid-state luminescence, the development of HAME-CPs suffers from high structural and synthetic complexity. Herein, a universal design principle and simple synthetic approach for HAME-CPs are developed. A series of simple non-fused polymers composed of charge transfer units, π bridges and emissive units are synthesized via a two-step microwave assisted C-H arylation and direct arylation polymerization protocol with high total yields up to 61 %. The synthetic protocol is verified valid among 7 monomers and 8 polymers. Most importantly, all 8 conjugated polymers have strong solid-state emission with high photoluminescence quantum yields up to 24 %. Furthermore, 4 polymers exhibit high ambipolar field effect mobility up to 10-2 cm2 V-1 s-1, and can be used in multifunctional optoelectronic devices. This work opens a new avenue for developing HAME-CPs by efficient synthesis and rational design.

An n-Type Conjugated Polymer with Low Crystallinity for High-Performance Organic Thermoelectrics.

Conjugated polymers (CPs) with low crystallinity are promising candidates for application in organic thermoelectrics (OTEs), particularly in flexible devices, because the disordered structures of these CPs can effectively accommodate dopants and ensure robust resistance to bending. However, n-doped CPs usually exhibit poor thermoelectric performance, which hinders the development of high-performance thermoelectric generators. Herein, we report an n-type CP (ThDPP-CNBTz) comprising two acceptor units: a thiophene-flanked diketopyrrolopyrrole and a cyano-functionalized benzothiadiazole. ThDPP-CNBTz shows a low LUMO energy level of below -4.20 eV and features low crystallinity, enabling high doping efficiency. Moreover, the dual-acceptor design enhances polaron delocalization, resulting in good thermoelectric performance. After n-doping, ThDPP-CNBTz exhibits an average electrical conductivity (σ) of 50.6 S cm-1 and a maximum power factor (PF) of 126.8 µW m-1 K-2, which is among the highest values reported for solution-processed n-type CPs to date. Additionally, a solution-processed flexible OTE device based on doped ThDPP-CNBTz exhibits a maximum PF of 70 µW m-1 K-2; the flexible device also shows remarkable resistance to bending strain, with only a marginal change in σ after 600 bending cycles. The findings presented in this work will advance the development of n-type CPs for OTE devices, and flexible devices in particular.

Isomerically Pure Oxindole-Terminated Quinoids for n-Type Organic Thin-Film Transistors Enabled by the Chlorination of Quinoidal Core.

Quinoidal compounds have great potential utility as high-performance organic semiconducting materials because of their rigid planar structures and extended π-conjugation. However, the existence of E and Z isomers adversely affects the charge-transport properties of quinoidal compounds. In this study, three isomerically pure oxindole-terminated quinoids were developed by introducing chlorine atoms in the quinoidal core. The synthesized quinoids were confirmed to have a Z,Z configuration by means of 1 H NMR spectroscopy, density functional theory calculations, and single-crystal X-ray analysis. Importantly, the strategy of chlorination allowed to maintain low-lying frontier molecular orbital energy levels and ensure favorable intermolecular packing. Consequently, all three quinoidal compounds showed n-type transport characteristics in organic thin-film transistors, with electron mobilities up to 0.35 cm2 V-1 s-1 , which is the highest value reported to date for oxindole-terminated quinoids. Our study can provide new guidelines for the design of isomerically pure quinoids with high electron mobilities.

Conjugated Polymers from Direct Arylation Polycondensation of 3,4-Difluorothiophene-Substituted Aryls: Synthesis and Properties.

3,4-Difluorothiophene-substituted aryls, i.e., 1,4-bis(3,4-difluorothiophen-2-yl)-benzene (Ph-2FTh), 1,4-bis(3,4-difluorothiophen-2-yl)-2,5-difluorobenzene (2FPh-2FTh), and 4,7-bis(3,4-difluorothiophen-2-yl)-2,1,3-benzothiadiazole (BTz-2FTh), are synthesized as C─H monomers for the synthesis of conjugated polymers (CPs) via direct arylation polycondensation (DArP) with diketopyrrolopyrrole (DPP) and isoindigo (IID) derivatives as C─Br monomers. The Gibbs free energies of activation for direct arylation (ΔG298 K , kcal mol-1 ) for α─C─H bonds of thiophene moieties as calculated by density functional theory (DFT) are 14.3, 16.5, and 16.4 kcal mol-1 for Ph-2FTh, 2FPh-2FTh and BTz-2FTh, respectively, meaning that inserting an electron-deficient unit in 3,3',4,4'-tetrafluoro-2,2'-bithiophene (4FBT, ΔG298K : 14.6 kcal mol-1 ) may cause a reactivity decrease of the C─H monomers. Photophysical and semiconducting properties of the resulting six CPs (i.e., DPP-Ph, DPP-2FPh, DPP-BTz, 2FIID-Ph, 2FIID-2FPh, and 2FIID-BTz) are characterized in detail. DPP-based CPs show ambipolar transport properties while IID-based ones exhibited n-type behavior owing to the deeper frontier molecular orbital energy levels of IID-based CPs. With source/drain electrodes modified with polyethylenimine ethoxylated, n-channel organic thin-film transistors with maximum electron mobility of 0.40, 0.54, 0.29, 0.05, 0.16, and 0.01 cm2 V-1 s-1 for DPP-Ph, DPP-2FPh, DPP-BTz, 2FIID-Ph, 2FIID-2FPh, and 2FIID-BTz, respectively, are fabricated. DPP-2FPh exhibits the best device performance due to the good film morphology and the highest intermolecular packing order.

A High-Performance n-Type Thermoelectric Polymer from C-H/C-H Oxidative Direct Arylation Polycondensation.

n-Type conjugated polymers (CPs) are crucial in the applications of organic electronics. Direct coupling of electron-deficient C-H monomer via selective C-H activation, namely C-H/C-H oxidative direct arylation polycondensation (Oxi-DArP), is an ideal approach toward such CPs. Herein, Oxi-DArP is firstly adopted to synthesize a high-performance n-type CP using a newly developed monomer, i.e., 3,6-di(thiazol-5-yl)-diketopyrrolopyrrole (Tz-5-DPP). Tz-5-DPP based homopolymer PTz-5-DPP with a molecular weight of 22 kDa has been synthesized via Oxi-DArP. After n-doping, PTz-5-DPP films exhibited electric conductivity values up to 8 S cm-1 and power factors (PFs) up to 106 µW m-1 K-2 . Notably, this PF value is the highest for n-type polymer thermoelectric materials to date. The Oxi-DArP synthesis and the excellent n-type performance of the polymer make this work an important step toward the straightforward and sustainable preparation of high-performance n-type polymer semiconductors.

Self-Doped n-Type Quinoidal Compounds with Good Air Stability and High Electrical Conductivity for Organic Electronics.

Air stable n-type conductive molecules with high electrical conductivities and excellent device performance have important applications in organic electronics, but their synthesis remains challenging. Herein, we report three self-doped n-type conductive molecules, designated QnNs, with a closed-shell quinoidal backbone and alkyl amino chains of different lengths. The QnNs are self-doped by intermolecular electron transfer from the amino groups to the quinoidal backbone. This process is ascertained unambiguously by experiments and theoretical calculations. The use of a quinoidal structure effectively improves the self-doping level, and thus increases the electrical conductivity of self-doped n-type conductive molecules achieved by a closed-shell structure from<10-4  S cm-1 to>0.03 S cm-1 . Furthermore, the closed-shell quinoidal structure results in good air stability of the QnNs, with half-lives>73 days; and Q4N shows an electrical conductivity of 0.019 S cm-1 even after exposure to air for 120 days. When applying Q6N as the cathode interlayer in organic solar cells (OSCs), an outstanding power conversion efficiency of up to 18.2 % was obtained, which represents one the best results in binary OSCs.

Solution-Phase Synthesis and Isolation of An Aza-Triangulene and Its Cation in Crystalline Form.

Synthesis of triangulene and its derivatives is challenging due to their intrinsic high spin nature. Herein, we report solution-phase synthesis and isolation of a nitrogen-doped triangulene (i.e., aza-triangulene) (NT) and its cation (NT+ ) in single-crystal form. Notably, the cation NT+ can be regarded as an isoelectronic structure of the corresponding all-carbon triangulene. Both NT and NT+ show reasonable stability due to kinetic blocking by bulky and electron-withdrawing aryl substituents, and intramolecular donor-acceptor interaction. Bond length analysis, magnetic measurements and theoretical calculations reveal that the neutral NT has a doublet ground state with a zwitterionic character, while the cation NT+ exhibits a triplet ground state with a singlet-triplet energy gap of +0.84 kcal mol-1 . This study provides a rational strategy to access high-spin systems by heteroatom doping of pure π-conjugated polycyclic hydrocarbons.

Indandione-Terminated Quinoids: Facile Synthesis by Alkoxide-Mediated Rearrangement Reaction and Semiconducting Properties.

A series of 1,3-indandione-terminated π-conjugated quinoids were synthesized by alkoxide-mediated rearrangement reaction of the respective alkene precursors, followed by air oxidation. This new protocol allows access to quinoidal compounds with variable termini and cores. The resulting quinoids all show LUMO levels below -4.0 eV and molar extinction coefficients above 105  L mol-1 cm-1 . The optoelectronic properties of these compounds can be regulated by tuning the central cores as well as the aryl termini ascribed to the delocalized frontier molecular orbitals over the entire molecular skeleton involving aryl termini. n-Channel organic thin-film transistors with electron mobility of up to 0.38 cm2 V-1 s-1 were fabricated, showing the potential of this new class of quinoids as organic semiconductors.

n-Type Azaacenes Containing B←N Units.

We disclose a novel strategy to design n-type acenes through the introduction of boron-nitrogen coordination bonds (B←N). We synthesized two azaacenes composed of two B←N units and six/eight linearly annelated rings. The B←N unit significantly perturbed the electronic structures of the azaacenes: Unique LUMOs delocalized over the entire acene skeletons and decreased aromaticity of the B←N-adjacent rings. Most importantly, these B←N-containing azaacenes exhibited low-lying LUMO energy levels and high electron affinities, thus leading to n-type character. The solution-processed organic field-effect transistor based on one such azaacene exhibited unipolar n-type characteristics with an electron mobility of 0.21 cm2 V-1 s-1 .

Fused Isoindigo Ribbons with Absorption Bands Reaching Near-Infrared.

Through fusing isoindigo (IID) units at 6,7;6',7'-positions, a series of new near-infrared (NIR) absorbing and stable ribbon-like conjugated molecules, namely nIIDs in which n represents the number of IID units, have been synthesized. The optical band gaps of the molecules are lowered from 2.03 eV of 1IID to 1.12 eV of 6IID with the increase of the conjugation length. 3IID, 4IID, and 6IID have strong absorption in the NIR region and exhibit photothermal conversion efficiencies of greater than 50 % under laser irradiation at λ=808 nm.

Cooperative effects of solvent and polymer acceptor co-additives in P3HT:PDI solar cells: simultaneous optimization in lateral and vertical phase separation.

In this work, solvent chloronaphthalene (CN) and polymer acceptor an alternating copolymer of perylene diimide and carbazole (PCPDI) were utilized as co-additives to optimize the nanoscale phase-separated morphology and photovoltaic properties of bulk-heterojunction (BHJ) polymer solar cells based on the poly(3-hexyl thiophene) (P3HT)/N,N'-bis(1-ethylpropyl)-perylene-3,4,9,10-tetracarboxylic diimide (EP-PDI) system. The domain size of EP-PDI molecules together with that of P3HT distinctly decreased by adding a 0.75 vol% CN additive. The optimized lateral phase separation increased the donor-acceptor interfacial area and facilitated the exciton dissociation process, leading to 5-fold enhancement of short-circuit current (JSC). Furthermore, when PCPDI was employed as a co-additive, acceptor materials (including PCPDI and EP-PDI) were prone to aggregation towards the top surface of blend films, improving vertical phase separation of active layers. PCPDI incorporation, which improved the percolation pathways for electron carriers, suppressed the crystallinity of P3HT distinctly. Thus, much more balanced charge transport was achieved by PCPDI addition, which resulted in almost 1-fold enhancement of open-circuit voltage (VOC) by reducing nongeminate recombination. As a consequence, cooperative effects of CN and PCPDI additives improved the nanoscale phase-separated morphology in lateral and vertical directions simultaneously, achieving the enhancement in both VOC and JSC.

Design strategy for the synthesis of self-doped n-type molecules.

n-Type organic conductive molecules play a significant role in organic electronics. Self-doping can increase the carrier concentration within the materials to improve the conductivity without the need for additional intentional dopants. This review focuses on the various strategies employed in the synthesis of self-doped n-type molecules, and provides an overview of the doping mechanisms. By elucidating these mechanisms, the review aims to establish the relationship between molecular structure and electronic properties. Furthermore, the review outlines the current applications of self-doped n-type molecules in the field of organic electronics, highlighting their performance and potential in various devices. It also offers insights into the future development of self-doped materials.

Unraveling the Stretch-Induced Microstructural Evolution and Morphology-Stretchability Relationships of High-Performance Ternary Organic Photovoltaic Blends.

The stretchability and stretch-induced structural evolution of organic solar cells (OSCs) are pivotal for their collapsible, portable, and wearable applications, and they are mainly affected by the complex morphology of active layers. Herein, a highly ductile conjugated polymer P(NDI2OD-T2) is incorporated into the active layers of high-efficiency OSCs based on nonfullerene small molecule acceptors to simultaneously investigate the morphological, mechanical, and photovoltaic properties and structural evolution under stretching of ternary blend films with various acceptor contents. The structural robustness of the blend films is indicated by their stretch-induced structural evolution, which is monitored in real-time by a combination of in situ wide/small angle X-ray scattering. It is found that adding the soft P(NDI2OD-T2) can enhance the stretchability and structural robustness of ternary blend films by more entangled chains and tie chains to dissipate strain. Furthermore, the stretchability of the ternary blends can be superbly predicted by a 3D equivalent box model. This work provides instructive insight and guidance for designing stretchable electronics and predicting the stretchability of multicomponent blends.

Convergent Synthesis of the Precursors to Thiophene-Based Quinoids.

A convergent (outside-to-center) route was adopted to synthesize the precursors of quinoidal compounds in high yields of 85-93%. With subsequent rearrangement/dehydroxylation and oxidation, a series of thiophene-based quinoids with indandione or oxindole terminal groups were successfully synthesized. This strategy shows good compatibility with versatile central and terminal units, leading to quinoidal compounds with tunable properties.

Conductance of o-carborane-based wires with different substitution patterns.

Here, we report the synthesis, structure, and single-molecule conductance of three o-carborane-based molecular wires (ortho-, meta- and para-CN) with multiple conduction channels. The effect of connectivity in target wires compared with the corresponding phenyl-centered wires was studied using the scanning tunneling microscope break junction (STM-BJ) technique and theoretical calculations. Interestingly, the three-dimensional structure in o-carborane-based wires can effectively promote the through-space transmission paths or the formation of stable molecular junctions compared to the corresponding phenyl-centered wires. Moreover, the significant conductance difference of o-carborane-based wires was due to the combination of multiple conduction channels and quantum interference. Understanding the effects of different bridging groups and anchor group substitution patterns provides guidelines for designing o-carborane-based multichannel molecular wires.

Retina-inspired organic neuromorphic vision sensor with polarity modulation for decoding light information.

The neuromorphic vision sensor (NeuVS), which is based on organic field-effect transistors (OFETs), uses polar functional groups (PFGs) in polymer dielectrics as interfacial units to control charge carriers. However, the mechanism of modulating charge transport on basis of PFGs in devices is unclear. Here, the carboxyl group is introduced into polymer dielectrics in this study, and it can induce the charge transfer process at the semiconductor/dielectric interfaces for effective carrier transport, giving rise to the best device mobility up to 20 cm2 V-1 s-1 at a low operating voltage of -1 V. Furthermore, the polarity modulation effect could further increase the optical figures of merit in NeuVS devices by at least an order of magnitude more than the devices using carboxyl group-free polymer dielectrics. Additionally, devices containing carboxyl groups improved image sensing for light information decoding with 52 grayscale signals and memory capabilities at an incredibly low power consumption of 1.25 fJ/spike. Our findings provide insight into the production of high-performance polymer dielectrics for NeuVS devices.

Tetrachromatic vision-inspired neuromorphic sensors with ultraweak ultraviolet detection.

Sensing and recognizing invisible ultraviolet (UV) light is vital for exploiting advanced artificial visual perception system. However, due to the uncertainty of the natural environment, the UV signal is very hard to be detected and perceived. Here, inspired by the tetrachromatic visual system, we report a controllable UV-ultrasensitive neuromorphic vision sensor (NeuVS) that uses organic phototransistors (OPTs) as the working unit to integrate sensing, memory and processing functions. Benefiting from asymmetric molecular structure and unique UV absorption of the active layer, the as fabricated UV-ultrasensitive NeuVS can detect 370 nm UV-light with the illumination intensity as low as 31 nW cm-2, exhibiting one of the best optical figures of merit in UV-sensitive neuromorphic vision sensors. Furthermore, the NeuVS array exbibits good image sensing and memorization capability due to its ultrasensitive optical detection and large density of charge trapping states. In addition, the wavelength-selective response and multi-level optical memory properties are utilized to construct an artificial neural network for extract and identify the invisible UV information. The NeuVS array can perform static and dynamic image recognition from the original color image by filtering red, green and blue noise, and significantly improve the recognition accuracy from 46 to 90%.