Eye infection risks from Pseudomonas aeruginosa via hand soap and eye drops.

Eye infections from bacterial contamination of bulk-refillable liquid soap dispensers and artificial tear eye drops continue to occur, resulting in adverse health outcomes that include impaired vision or eye enucleation. Pseudomonas aeruginosa (P. aeruginosa), a common cause of eye infections, can grow in eye drop containers and refillable soap dispensers to high numbers. To assess the risk of eye infection, a quantitative microbial risk assessment for P. aeruginosa was conducted to predict the probability of an eye infection for two potential exposure scenarios: (i) individuals using bacteria-contaminated eye drops and (ii) contact lens wearers washing their hands with bacteria-contaminated liquid soap prior to placing the lens. The median risk of an eye infection using contaminated eye drops and hand soap for both single and multiple exposure events (per day) ranged from 10-1 to 10-4, with contaminated eye drops having the greater risk. The concentration of P. aeruginosa was identified as the parameter contributing the greatest variance on eye infection risk; therefore, the prevalence and level of bacterial contamination of the product would have the greatest influence on health risk. Using eye drops in a single-use container or with preservatives can mitigate bacterial growth, and using non-refillable soap dispensers is recommended to reduce contamination of hand soap. Given the opportunistic nature of P. aeruginosa and its ability to thrive in unique environments, additional safeguards to mitigate bacterial growth and exposure are warranted.IMPORTANCEPseudomonas aeruginosa (P. aeruginosa) is a pathogen that can persist in a variety of unusual environments and continues to pose a significant risk for public health. This quantitative microbial risk assessment (QMRA) estimates the potential human health risks, specifically for eye infections, associated with exposure to P. aeruginosa in bacteria-contaminated artificial tear eye drops and hand soap. This study applies the risk assessment framework of QMRA to evaluate eye infection risks through both consumer products. The study examines the prevalence of this pathogen in eye drops and soap, as well as the critical need to implement measures that will mitigate bacterial exposure (e.g., single-use soap dispensers and eye drops with preservatives). Additionally, limitations and challenges are discussed, including the need to incorporate data regarding consumer practices, which may improve exposure assessments and health risk estimates.

Human adenovirus-associated health risk in the recreational waters of the Yal-ku lagoon in the Mexican Caribbean.

The study objective was to evaluate human faecal contamination impacts in the Yal-ku lagoon in the Mexican Caribbean and to estimate adenovirus infection and illness risks associated with recreational exposure during water activities. A total of 20 water samples (10 from each site × two sites) (50 L) were collected monthly over a period of 12 months from two selected sampling sites in the swimming area of the Yal-ku lagoon. The occurrence of faecal-associated viruses was explored, and human adenovirus (HAdV) and pepper mild mottle virus (PMMoV) concentrations were quantified. A quantitative microbial risk assessment (QMRA) model was used to estimate exposure and subsequent adenovirus infection and illness risk for 1 h of swimming or snorkelling. Somatic and F + -specific coliphages occurred in 100% of the samples. Both HAdV and PMMoV were detected at a 60% frequency thereby indicating persistent faecal inputs. PMMoV concentrations (44-370 GC/L) were relatively lower than the concentrations of HAdV (64-1,000 GC/L). Estimated mean adenovirus risks were greater for snorkelling than for swimming by roughly one to two orders of magnitude and estimated mean illness risks for snorkelling were >32/1,000. Human faecal contamination is frequent in the Yal-ku lagoon, which is associated with human gastrointestinal illness.

Antifungal activity and mechanism of action of natural product derivates as potential environmental disinfectants.

There have been a considerable number of antifungal studies that evaluated natural products (NPs), such as medicinal plants and their secondary metabolites, (phenolic compounds, alkaloids), essential oils, and propolis extracts. These studies have investigated natural antifungal substances for use as food preservatives, medicinal agents, or in agriculture as green pesticides because they represent an option of safe, low-impact, and environmentally friendly antifungal compounds; however, few have studied these NPs as an alternative to disinfection/sanitation for indoor air or environmental surfaces. This review summarizes recent studies on NPs as potential fungal disinfectants in different environments and provides information on the mechanisms of inactivation of these products by fungi. The explored mechanisms show that these NPs can interfere with ATP synthesis and Ca++ and K+ ion flow, mainly damaging the cell membrane and cell wall of fungi, respectively. Another mechanism is the reactive oxygen species effect that damages mitochondria and membranes. Inhibition of the overexpression of the efflux pump is another mechanism that involves damage to fungal proteins. Many NPs appear to have potential as indoor environmental disinfectants. ONE-SENTENCE SUMMARY: This review shows the latest advances in natural antifungals applied to different indoor environments. Fungi have generated increased tolerance to the mechanisms of traditional antifungals, so this review also explores the various mechanisms of action of various natural products to facilitate the implementation of technology.

Evaluation of nuclear and mitochondrial phylogenetics for the subtyping of Cyclospora cayetanensis.

Cyclospora cayetanensis is an enteric coccidian parasite responsible for gastrointestinal disease transmitted through contaminated food and water. It has been documented in several countries, mostly with low-socioeconomic levels, although major outbreaks have hit developed countries. Detection methods based on oocyst morphology, staining, and molecular testing have been developed. However, the current MLST panel offers an opportunity for enhancement, as amplification of all molecular markers remains unfeasible in the majority of samples. This study aims to address this challenge by evaluating two approaches for analyzing the genetic diversity of C. cayetanensis and identifying reliable markers for subtyping: core homologous genes and mitochondrial genome analysis. A pangenome was constructed using 36 complete genomes of C. cayetanensis, and a haplotype network and phylogenetic analysis were conducted using 33 mitochondrial genomes. Through the analysis of the pangenome, 47 potential markers were identified, emphasizing the need for more sequence data to achieve comprehensive characterization. Additionally, the analysis of mitochondrial genomes revealed 19 single-nucleotide variations that can serve as characteristic markers for subtyping this parasite. These findings not only contribute to the selection of molecular markers for C. cayetanensis subtyping, but they also drive the knowledge toward the potential development of a comprehensive genotyping method for this parasite.

In vitro antiviral effect of Mexican and Brazilian propolis and phenolic compounds against human coronavirus 229E.

Propolis is a resinous substance collected by bees (Apis mellifera). It is used for its biological properties. This natural product is available as a safe therapeutic option. Herein, we report the antiviral effects of brown propolis extract from Mexico and green and red propolis extracts from Brazil, as well as their phenolic compounds (quercetin, caffeic acid, and rutin) in preventing infection of MRC-5 cells by HCoV-229E. Normal human fibroblast lung cells (MRC-5) were used to determine the cytotoxicity of the compounds. All samples studied showed antiviral activity. Green and brown propolis extracts, and quercetin exhibited the best EC50 values with values of 19.080, 11.240, and 77.208 µg/mL against HCoV-229E, respectively, and with TC50 of 62.19, 29.192, and 298 µg/mL on MRC-5 cells, respectively. These results are the first in vitro study of the effects of propolis on HCoV-229E and provide the basis for the development of natural formulations against other coronavirus strains.

Variations in Bacterial Communities and Antibiotic Resistance Genes Across Diverse Recycled and Surface Water Irrigation Sources in the Mid-Atlantic and Southwest United States: A CONSERVE Two-Year Field Study.

Reduced availability of agricultural water has spurred increased interest in using recycled irrigation water for U.S. food crop production. However, there are significant knowledge gaps concerning the microbiological quality of these water sources. To address these gaps, we used 16S rRNA gene and metagenomic sequencing to characterize taxonomic and functional variations (e.g., antimicrobial resistance) in bacterial communities across diverse recycled and surface water irrigation sources. We collected 1 L water samples (n = 410) between 2016 and 2018 from the Mid-Atlantic (12 sites) and Southwest (10 sites) U.S. Samples were filtered, and DNA was extracted. The V3-V4 regions of the 16S rRNA gene were then PCR amplified and sequenced. Metagenomic sequencing was also performed to characterize antibiotic, metal, and biocide resistance genes. Bacterial alpha and beta diversities were significantly different (p < 0.001) across water types and seasons. Pathogenic bacteria, such as Salmonella enterica, Staphylococcus aureus, and Aeromonas hydrophilia were observed across sample types. The most common antibiotic resistance genes identified coded against macrolides/lincosamides/streptogramins, aminoglycosides, rifampin and elfamycins, and their read counts fluctuated across seasons. We also observed multi-metal and multi-biocide resistance across all water types. To our knowledge, this is the most comprehensive longitudinal study to date of U.S. recycled water and surface water used for irrigation. Our findings improve understanding of the potential differences in the risk of exposure to bacterial pathogens and antibiotic resistance genes originating from diverse irrigation water sources across seasons and U.S. regions.

Minding the matrix: The importance of inoculum suspensions on finger transfer efficiency of virus.

AIMS: The aim of this study was to determine how the transfer efficiency of MS-2 coliphage from the toilet seat to hands and fingertip to lip differs according to the suspension of the inoculum. METHODS AND RESULTS: Hands were sampled after lifting a toilet seat which was inoculated with MS-2 on the underneath side. MS-2 was suspended in a spectrum of proteinaceous and non-proteinaceous solutions. Transfer efficiencies were greatest with the ASTM tripartite soil load (3.02% ± 4.03) and lowest with phosphate-buffered saline (PBS) (1.10% ± 0.81) for hand-to-toilet seat contacts. Finger-to-lip transfer rates were significantly different (p < 0.05) depending on suspension matrix, with PBS yielding the highest transfer (52.53% ± 4.48%) and tryptose soy broth (TSB) the lowest (23.15% ± 24.27%). Quantitative microbial risk assessment was used to estimate the probability of infection from adenovirus and norovirus from finger contact with a toilet seat. CONCLUSIONS: The greatest transfer as well as the largest variation of transfer were measured for finger-to-lip contacts as opposed to toilet seat-to-finger contacts. These factors influence the estimation of the probability of infection from micro-activity, that is, toilet seat adjustment. SIGNIFICANCE AND IMPACT: Viruses may be transferred from various human excreta with differing transfer efficiencies, depending on the protein content.

Quantifying pathogen infection risks from household laundry practices.

AIMS: Contaminated laundry can spread infections. However, current directives for safe laundering are limited to healthcare settings and not reflective of domestic conditions. We aimed to use quantitative microbial risk assessment to evaluate household laundering practices (e.g., detergent selection, washing and drying temperatures, and sanitizer use) relative to log10 reductions in pathogens and infection risks during the clothes sorting, washer/dryer loading, folding and storing steps. METHODS AND RESULTS: Using published data, we characterized laundry infection risks for respiratory and enteric pathogens relative to a single user contact scenario and a 1.0 × 10-6 acceptable risk threshold. For respiratory pathogens, risks following cold water wash temperatures (e.g. median 14.4℃) and standard detergents ranged from 2.2 × 10-5 to 2.2 × 10-7 . Use of advanced, enzymatic detergents reduced risks to 8.6 × 10-8 and 2.2 × 10-11 respectively. For enteric pathogens, however, hot water, advanced detergents, sanitizing agents and drying are needed to reach risk targets. SIGNIFICANCE AND IMPACT OF THE STUDY: Conclusions provide guidance for household laundry practices to achieve targeted risk reductions, given a single user contact scenario. A key finding was that hand hygiene implemented at critical control points in the laundering process was the most significant driver of infection prevention, additionally reducing infection risks by up to 6 log10 .

Laundry Hygiene and Odor Control: State of the Science.

Laundering of textiles-clothing, linens, and cleaning cloths-functionally removes dirt and bodily fluids, which prevents the transmission of and reexposure to pathogens as well as providing odor control. Thus, proper laundering is key to controlling microbes that cause illness and produce odors. The practice of laundering varies from region to region and is influenced by culture and resources. This review aims to define laundering as a series of steps that influence the exposure of the person processing the laundry to pathogens, with respect to the removal and control of pathogens and odor-causing bacteria, while taking into consideration the types of textiles. Defining laundering in this manner will help better educate the consumer and highlight areas where more research is needed and how to maximize products and resources. The control of microorganisms during laundering involves mechanical (agitation and soaking), chemical (detergent and bleach), and physical (detergent and temperature) processes. Temperature plays the most important role in terms of pathogen control, requiring temperatures exceeding 40°C to 60°C for proper inactivation, while detergents play a role in reducing the microbial load of laundering through the release of microbes attached to fabrics and the inactivation of microbes sensitive to detergents (e.g., enveloped viruses). The use of additives (enzymes) and bleach (chlorine and activated oxygen) becomes essential in washes with temperatures below 20°C, especially for certain enteric viruses and bacteria. A structured approach is needed that identifies all the steps in the laundering process and attempts to identify each step relative to its importance to infection risk and odor production.

UV Inactivation of SARS-CoV-2 across the UVC Spectrum: KrCl* Excimer, Mercury-Vapor, and Light-Emitting-Diode (LED) Sources.

Effective disinfection technology to combat severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can help reduce viral transmission during the ongoing COVID-19 global pandemic and in the future. UV devices emitting UVC irradiation (200 to 280 nm) have proven to be effective for virus disinfection, but limited information is available for SARS-CoV-2 due to the safety requirements of testing, which is limited to biosafety level 3 (BSL3) laboratories. In this study, inactivation of SARS-CoV-2 in thin-film buffered aqueous solution (pH 7.4) was determined across UVC irradiation wavelengths of 222 to 282 nm from krypton chloride (KrCl*) excimers, a low-pressure mercury-vapor lamp, and two UVC light-emitting diodes. Our results show that all tested UVC devices can effectively inactivate SARS-CoV-2, among which the KrCl* excimer had the best disinfection performance (i.e., highest inactivation rate). The inactivation rate constants of SARS-CoV-2 across wavelengths are similar to those for murine hepatitis virus (MHV) from our previous investigation, suggesting that MHV can serve as a reliable surrogate of SARS-CoV-2 with a lower BSL requirement (BSL2) during UV disinfection tests. This study provides fundamental information on UVC's action on SARS-CoV-2 and guidance for achieving reliable disinfection performance with UVC devices. IMPORTANCE UV light is an effective tool to help stem the spread of respiratory viruses and protect public health in commercial, public, transportation, and health care settings. For effective use of UV, there is a need to determine the efficiency of different UV wavelengths in killing pathogens, specifically SARS-CoV-2, to support efforts to control the ongoing COVID-19 global pandemic and future coronavirus-caused respiratory virus pandemics. We found that SARS-CoV-2 can be inactivated effectively using a broad range of UVC wavelengths, and 222 nm provided the best disinfection performance. Interestingly, 222-nm irradiation has been found to be safe for human exposure up to thresholds that are beyond those effective for inactivating viruses. Therefore, applying UV light from KrCl* excimers in public spaces can effectively help reduce viral aerosol or surface-based transmissions.

Impact of a Novel Antimicrobial Surface Coating on Health Care-Associated Infections and Environmental Bioburden at 2 Urban Hospitals.

BACKGROUND: Approximately 1 in 25 people admitted to a hospital in the United States will suffer a health care-associated infection (HAI). Environmental contamination of hospital surfaces contributes to HAI transmission. We investigated the impact of an antimicrobial surface coating on HAIs and environmental bioburdens at 2 urban hospitals. METHODS: A transparent antimicrobial surface coating was applied to patient rooms and common areas in 3 units at each hospital. Longitudinal regression models were used to compare changes in hospital-onset multidrug-resistant organism bloodstream infection (MDRO-BSI) and Clostridium difficile infection (CDI) rates in the 12 months before and after application of the surface coating. Incidence rate ratios (IRRs) were compared for units receiving the surface coating application and for contemporaneous control units. Environmental samples were collected pre- and post-application to identify bacterial colony forming units (CFUs) and the percent of sites positive for select, clinically relevant pathogens. RESULTS: Across both hospitals, there was a 36% decline in pooled HAIs (combined MDRO-BSIs and CDIs) in units receiving the surface coating application (IRR, 0.64; 95% confidence interval [CI], .44-.91), and no decline in the control units (IRR, 1.20; 95% CI, .92-1.55). Following the surface application, the total bacterial CFUs at Hospitals A and B declined by 79% and 75%, respectively; the percentages of environmental samples positive for clinically relevant pathogens also declined significantly for both hospitals. CONCLUSIONS: Statistically significant reductions in HAIs and environmental bioburdens occurred in the units receiving the antimicrobial surface coating, suggesting the potential for improved patient outcomes and persistent reductions in environmental contamination. Future studies should assess optimal implementation methods and long-term impacts.

Sediment re-suspension as a potential mechanism for viral and bacterial contaminants.

Pathogenic enteric viruses and bacteria tend to occur in higher concentrations and survive longer in aquatic sediments than suspended in the water column. Re-suspension of these organisms can result in a significant degradation of overlying water quality. Additionally, the re-suspension of microbial pathogens in artificial irrigation canals could endanger the consumption of fresh and ready-to-eat produce. Irrigation water has been implicated in numerous fresh produce outbreaks over the last 30 years. This study aimed to quantify the proportions of bacterial and viral re-suspension from sediment in a recirculating flume with varying velocities. MS2 coliphage and Escherichia coli were found to re-suspend at rates that were not significantly different, despite organism size differences. However, E. coli re-suspension rates from sand and clay were significantly different. This suggests that likely sediment-associated particles were recovered with the organisms attached. Similar re-suspension rates are hypothesized to be due to the dynamics of sediment transport, rather than that of the organisms themselves. This study also indicated that the re-suspension of sediment at very low velocities (e.g., less than 10 cm/s), could impact the microbiological quality of the overlaying water. Results from this study conclude that sediment could be a viable mechanism for irrigation water contamination.

Cost-benefit of point-of-use devices for lead reduction.

BACKGROUND: Lead exposure represents a significant human health concern that often occurs with little warning to the consumer. Water lead levels can be mitigated by point-of-use (POU) devices such as reverse osmosis, distillation, or activated carbon with lead reduction media. OBJECTIVES: This study assessed a partial cost-benefit of residential installation of POU devices to reduce lead concentrations in drinking water and examined the economic impact at the community level based on exposures reported in Flint, Michigan. METHODS: We calculated the individual consumer breakeven point for each lead abatement option by subtracting the lifetime cost of device installation and maintenance from the lifetime cost of lead exposure through its impact on intelligence (IQ) and lifetime earnings. This approach was then extrapolated to the community level based on reported lead exposures in Flint, Michigan. RESULTS: Based on operating POU device costs, lead absorption from water, and economic losses associated with reduced IQ, initial water lead levels associated with consumer breakeven points for reverse osmosis (7.31 µg/L), activated carbon (3.73 µg/L), and distillation (12.0 µg/L) were calculated. For example, an individual consuming water with 25 µg/L of lead, similar to the 90th percentile of concentrations measured in Flint, Michigan, would have an expected blood lead level of 1.25 µg/dL, a corresponding loss of 0.641 IQ points, and a lifetime economic earnings loss of $14,284. Over 70 years of continued use, activated carbon with lead reduction media is the least expensive device to maintain and operate as compared to reverse osmosis and distillation. CONCLUSIONS: Infrastructure failures related to drinking water are unpredictable and exposure to contaminates can have significant economic ramifications. POU devices represent a cost-effective option to reduce the impact of lead exposure, particularly when water lead concentrations exceed regulated levels.

Review of water quality criteria for water reuse and risk-based implications for irrigated produce under the FDA Food Safety Modernization Act, produce safety rule.

Questions related to the safety of alternative water sources, such as recycled water or reclaimed water (including grey water, produced water, return flows, and recycled wastewater), for produce production have been largely un-explored at the detail warranted for protection of public health. Additionally, recent outbreaks of Escherichia coli (E. coli) in fresh produce, in which agricultural water was suspected as the source, coupled with heightened media coverage, have elevated fruit and vegetable safety into the forefront of public attention. Exacerbating these concerns, new Federal regulations released by the U.S. Food and Drug Administration (FDA) as part of implementation of the FDA Food Safety Modernization Act (FSMA), require testing of agricultural water quality for generic E. coli. Here, we present a review of water quality criteria - including surface water, groundwater recreational water, and water reuse - in an attempt to better understand implications of new FDA regulations on irrigated produce. In addition, a Quantitative Microbial Risk Assessment (QMRA) was conducted to estimate risks from pathogen contamination of food crops eaten fresh under the context of FDA regulations to provide perspective on current water reuse regulations across the country. Results indicate that irrigation water containing 126 CFU/100 mL of E. coli correspond to a risk of GI illness (diarrhea) of 9 cases in 100,000,000 persons (a 0.000009% risk) for subsurface irrigation, 1.1 cases in 100,000 persons (a 0.0011% risk) for furrow irrigation, and 1.1 cases in 1000 persons (a 0.11% risk) for sprinkler irrigation of lettuce. In comparison to metrics in states that currently regulate the use of recycled water for irrigation of food crops eaten fresh, the FDA FSMA water quality metrics are less stringent and therefore the use of recycled water presents a reduced risk to consumers than the FDA regulations. These findings, while limited to a one-time exposure event of lettuce irrigated with water meeting FSMA water quality regulations, highlight the need for additional assessments to determine if the scientific-basis of the regulation is protective of public health.

Modeling the role of fomites in a norovirus outbreak.

Norovirus accounts for a large portion of the gastroenteritis disease burden, and outbreaks have occurred in a wide variety of environments. Understanding the role of fomites in norovirus transmission will inform behavioral interventions, such as hand washing and surface disinfection. The purpose of this study was to estimate the contribution of fomite-mediated exposures to infection and illness risks in outbreaks. A simulation model in discrete time that accounted for hand-to-porous surfaces, hand-to-nonporous surfaces, hand-to-mouth, -eyes, -nose, and hand washing events was used to predict 17 hr of simulated human behavior. Norovirus concentrations originated from monitoring contamination levels on surfaces during an outbreak on houseboats. To predict infection risk, two dose-response models (fractional Poisson and 2F1 hypergeometric) were used to capture a range of infection risks. A triangular distribution describing the conditional probability of illness given an infection was multiplied by modeled infection risks to estimate illness risks. Infection risks ranged from 70.22% to 72.20% and illness risks ranged from 21.29% to 70.36%. A sensitivity analysis revealed that the number of hand-to-mouth contacts and the number of hand washing events had strong relationships with model-predicted doses. Predicted illness risks overlapped with leisure setting and environmental attack rates reported in the literature. In the outbreak associated with the viral concentrations used in this study, attack rates ranged from 50% to 86%. This model suggests that fomites may have accounted for 25% to 82% of illnesses in this outbreak. Fomite-mediated exposures may contribute to a large portion of total attack rates in outbreaks involving multiple transmission modes. The findings of this study reinforce the importance of frequent fomite cleaning and hand washing, especially when ill persons are present.

Efficacy of copper and silver as residual disinfectants in drinking water.

Contamination events and biofilms can decrease the amount of free chlorine available in drinking water systems. The efficacy of 100 µg/L silver and 400 µg/L copper, individually and combined, were evaluated as secondary, longer-lasting residual disinfectants against Salmonella enterica serovar Typhimurium, Escherichia coli, Listeria monocytogenes, and Mycobacterium fortuitum at 24 °C and 4 °C. A >5.0-log10 reduction was observed in E. coli and L. monocytogenes after three hours and S. Typhimurium following seven hours of exposure to silver. M. fortuitum was the most resistant species to silver (1.11-log10 after seven hours). Copper did not significantly reduce S. Typhimurium and E. coli at 24 °C; ≥2.80-log10 reductions were observed in the Gram-positive L. monocytogenes and M. fortuitum. Longer exposure times were required at 4 °C to achieve significant reductions in all species. A synergistic effect was observed when silver and copper were combined at 24 °C. In addition, silver was not affected by the presence of organic matter at concentrations that completely inhibited 0.2 mg/L chlorine. The results of this study suggest that combinations of silver and copper show promise as secondary residual disinfectants. They may also be used in conjunction with low chlorine levels or other disinfectants to provide additional, long-lasting residuals in distribution systems.

Antibiotic Resistant Bacteria in Municipal Wastes: Is There Reason for Concern?

Recently, there has been increased concern about the presence of antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARG), in treated domestic wastewaters, animal manures and municipal biosolids. The concern is whether these additional sources of ARB contribute to antibiotic resistance levels in the environment, that is, "environmental antibiotic resistance." ARB and ARG occur naturally in soil and water, and it remains unclear whether the introduction of ARB in liquid and solid municipal and animal wastes via land application have any significant impact on the background levels of antibiotic resistance in the environment, and whether they affect human exposure to ARB. In this current review, we examine and re-evaluate the incidence of ARB and ARG resulting from land application activities, and offer a new perspective on the threat of antibiotic resistance to public health via exposure from nonclinical environmental sources. Based on inputs of ARBs and ARGs from land application, their fate in soil due to soil microbial ecology principles, and background indigenous levels of ARBs and ARGs already present in soil, we conclude that while antibiotic resistance levels in soil are increased temporally by land application of wastes, their persistence is not guaranteed and is in fact variable, and often contradictory based on application site. Furthermore, the application of wastes may not produce the most direct impact of ARGs and ARB on public health. Further investigation is still warranted in agriculture and public health, including continued scrutiny of antibiotic use in both sectors.

Reduction of Cryptosporidium, Giardia, and Fecal Indicators by Bardenpho Wastewater Treatment.

Increased demand for water reuse and reclamation accentuates the importance for optimal wastewater treatment to limit protozoa in effluents. Two wastewater treatment plants utilizing advanced Bardenpho were investigated over a 12-month period to determine the incidence and reduction of Cryptosporidium, Giardia, Cyclospora, and fecal indicators. Results were compared to facilities that previously operated in the same geographical area. Protozoa (oo)cysts were concentrated using an electronegative filter and subsequently detected by fluorescent microscopy and/or PCR methods. Cryptosporidium and Giardia were frequently detected in raw sewage, but Cyclospora was not detected in any wastewater samples. Facilities with Bardenpho treatment exhibited higher removals of (oo)cysts than facilities utilizing activated sludge or trickling filters. This was likely due to Bardenpho systems having increased solid wasting rates; however, this mechanism cannot be confirmed as sludge samples were not analyzed. Use of dissolved-air-flotation instead of sedimentation tanks did not result in more efficient removal of (oo)cysts. Concentrations of protozoa were compared with each other, Escherichia coli, somatic coliphage, and viruses (pepper mild mottle virus, Aichi virus 1, adenovirus, and polyomaviruses JC and BK). Although significant correlations were rare, somatic coliphage showed the highest potential as an indicator for the abundance of protozoa in wastewaters.

Viral Aggregation: Impact on Virus Behavior in the Environment.

Aggregates of viruses can have a significant impact on quantification and behavior of viruses in the environment. Viral aggregates may be formed in numerous ways. Viruses may form crystal like structures and aggregates in the host cell during replication or may form due to changes in environmental conditions after virus particles are released from the host cells. Aggregates tend to form near the isoelectric point of the virus, under the influence of certain salts and salt concentrations in solution, cationic polymers, and suspended organic matter. The given conditions under which aggregates form in the environment are highly dependent on the type of virus, type of salts in solution (cation, anion. monovalent, divalent) and pH. However, virus type greatly influences the conditions when aggregation/disaggregation will occur, making predictions difficult under any given set of water quality conditions. Most studies have shown that viral aggregates increase the survival of viruses in the environment and resistance to disinfectants, especially with more reactive disinfectants. The presence of viral aggregates may also result in overestimation of removal by filtration processes. Virus aggregation-disaggregation is a complex process and predicting the behavior of any individual virus is difficult under a given set of environmental circumstances without actual experimental data.

Genetically distinct genogroup IV norovirus strains identified in wastewater.

We investigated the prevalence and genetic diversity of genogroup IV norovirus (GIV NoV) strains in wastewater in Arizona, United States, over a 13-month period. Among 50 wastewater samples tested, GIV NoVs were identified in 13 (26 %) of the samples. A total of 47 different GIV NoV strains were identified, which were classified into two genetically distinct clusters: the GIV.1 human cluster and a unique genetic cluster closely related to strains previously identified in Japanese wastewater. The results provide additional evidence of the considerable genetic diversity among GIV NoV strains through the analysis of wastewater containing virus strains shed from all populations.