Impact of Annealing Temperature on the Morphological, Optical and Photoelectrochemical Properties of Cauliflower-like CdSe0.6Te0.4 Photoelectrodes; Enhanced Solar Cell Performance.

We are reporting on the impact of air annealing temperatures on the physicochemical properties of electrochemically synthesized cadmium selenium telluride (CdSe0.6Te0.4) samples for their application in a photoelectrochemical (PEC) solar cell. The CdSe0.6Te0.4 samples were characterized with several sophisticated techniques to understand their characteristic properties. The XRD results presented the pure phase formation of the ternary CdSe0.6Te0.4 nanocompound with a hexagonal crystal structure, indicating that the annealing temperature influences the XRD peak intensity. The XPS study confirmed the existence of Cd, Se, and Te elements, indicating the formation of ternary CdSe0.6Te0.4 compounds. The FE-SEM results showed that the morphological engineering of the CdSe0.6Te0.4 samples can be achieved simply by changing the annealing temperatures from 300 to 400 °C with intervals of 50 °C. The efficiencies (ƞ) of the CdSe0.6Te0.4 photoelectrodes were found to be 2.0% for the non-annealed and 3.1, 3.6, and 2.5% for the annealed at 300, 350, and 400 °C, respectively. Most interestingly, the PEC cell analysis indicated that the annealing temperatures played an important role in boosting the performance of the photoelectrochemical properties of the solar cells.

Photocatalytic activity of CuO/Cu(OH)2 nanostructures in the degradation of Reactive Green 19A and textile effluent, phytotoxicity studies and their biogenic properties (antibacterial and anticancer).

In this study, CuO/Cu(OH)2 (denoted as CuONs) nanostructures were synthesized relying to a cheap and rapid chemical co-precipitation method using copper sulfate and liquid ammonia as precursors. Results obtained from X-ray diffraction, and field emission scanning electron microscopy analysis revealed the crystalline nature of synthesized CuONs. Fourier transform infrared spectroscopy and energy dispersive spectroscopy studies showed interactions between copper and oxygen atoms. Synthesized CuONs showed the size in the range of 20-30 nm using high resolution transmission electron microscopy analysis. The photocatalytic degradation performance of Reactive Green 19A (RG19A) dye using CuONs was evaluated. The results showed that CuONs exhibited 98% degradation efficiency after 12 h and also complete mineralization in form of reducing chemical oxygen demand (COD) (84%) and total organic carbon (TOC) (80%). The nanocatalyst was recovered from the dye containing solution and its catalytic activity can be reused up to four times efficiently. CuONs was also able to decolorize actual textile effluent (80% in terms of the American Dye Manufacturers' Institute (ADMI) value) with significant reductions in COD (72%) and TOC (69%). Phytotoxicity studies revealed that the degradation products of RG19A and textile effluent were scarcely toxic in nature, thereby increasing the applicability of CuONs for the treatment of textile wastewater. Additionally, the CuONs showed a maximum antibacterial effect against human pathogens which also displayed synergistic antibacterial potential related to commercial antibiotics. Moreover, CuONs displayed strong antioxidant activity in terms of ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (IC50: 51 µg/mL) and DPPH (1,1-diphenyl-2-picrylhydrazyl) (IC50: 60 µg/mL) radical scavenging. The CuONs exhibited dose dependent response against tumor rat C6 cell line (IC50: 60 µg/mL) and may serve as anticancer agents.

Physicochemical characterization, drug release, and biocompatibility evaluation of carboxymethyl cellulose-based hydrogels reinforced with sepiolite nanoclay.

Polymer-clay nanocomposite hydrogel films (PCNCHFs) were prepared from caboxymethyl cellulose, polyvinylpyrrolidone, agar and nanosepiolite clay (0, 0.3, 0.5, 0.7, 0.9 and 1.5% reinforcement) by treating thermally in a simple, rapid, and inexpensive route. The PCNCHFs and its 5-fluorouracil (FU)-loaded composites (PCNCHFs@FU) were tested for FU release and characterized by FTIR, XRD, FE-SEM, EDX, DSC, and TGA analyses to investigate their structural, morphological, and thermal properties. The nanosepiolite-loaded polymer composites (PCNCHF1 to PCNCHF5) exhibited higher tensile strength than the pristine polymer hydrogel (PCNCHF0); consequently, the thermal properties (glass- and melting-transition) were improved. The PCNCHFs@FU demonstrated prolonged FU release at pH 7.4 for 32 h. The biocompatibility of PCNCHFs was tested against human skin fibroblast (CCDK) cells. The viability of cells exposed to all PCNCHFs was >95% after 72 h of culture. The live/dead assay show the proliferation of fibroblast cells, confirming the biocompatibility of the hydrogels. The pH-sensitive PCNCHFs@FU release could be suitable for drug release in cancer therapy, and the developed PCNCHFs may also be useful for tissue engineering, food packaging, and other biological applications.

An Overview of Recent Advancements in Microbial Polyhydroxyalkanoates (PHA) Production from Dark Fermentation Acidogenic Effluents: A Path to an Integrated Bio-Refinery.

Global energy consumption has been increasing in tandem with economic growth motivating researchers to focus on renewable energy sources. Dark fermentative hydrogen synthesis utilizing various biomass resources is a promising, less costly, and less energy-intensive bioprocess relative to other biohydrogen production routes. The generated acidogenic dark fermentative effluent [e.g., volatile fatty acids (VFAs)] has potential as a reliable and sustainable carbon substrate for polyhydroxyalkanoate (PHA) synthesis. PHA, an important alternative to petrochemical based polymers has attracted interest recently, owing to its biodegradability and biocompatibility. This review illustrates methods for the conversion of acidogenic effluents (VFAs), such as acetate, butyrate, propionate, lactate, valerate, and mixtures of VFAs, into the value-added compound PHA. In addition, the review provides a comprehensive update on research progress of VFAs to PHA conversion and related enhancement techniques including optimization of operational parameters, fermentation strategies, and genetic engineering approaches. Finally, potential bottlenecks and future directions for the conversion of VFAs to PHA are outlined. This review offers insights to researchers on an integrated biorefinery route for sustainable and cost-effective bioplastics production.

A comprehensive overview and recent advances on polyhydroxyalkanoates (PHA) production using various organic waste streams.

Polyhydroxyalkanoates (PHA) are appealing as an important alternative to replace synthetic plastics owing to its comparable physicochemical properties to that of synthetic plastics, and biodegradable and biocompatible nature. This review gives an inclusive overview of the current research activities dealing with PHA production by utilizing different waste fluxes generated from food, milk and sugar processing industries. Valorization of these waste fluxes makes the process cost effective and practically applicable. Recent advances in the approaches adopted for waste treatment, fermentation strategies, and genetic engineering can give insights to the researchers for future direction of waste to bioplastics production. Lastly, synthesis and application of PHA-nanocomposites, research and development challenges, future perspectives for sustainable and cost-effective PHB production are also discussed. In addition, the review addresses the useful information about the opportunities and confines associated with the sustainable PHA production using different waste streams and their evaluation for commercial implementation within a biorefinery.

Efficient bioconversion of sugarcane bagasse into polyhydroxybutyrate (PHB) by Lysinibacillus sp. and its characterization.

In this study, Lysinibacillus sp. RGS was evaluated to synthesize polyhydroxybutyrate (PHB) from a broad range of pure carbon sources and residual sugars of chemically pretreated sugarcane bagasse (SCB) hydrolysates. Effects of supplementation of nutrients and various experimental variables to enhance PHB accumulation were investigated. Results of optimized parameters were identified as 48 h, 37 °C, pH 7; inoculums concentration (2.5% v/v) and shaking condition (100 rpm). Growth kinetics and bioprocess parameters of Lysinibacillus sp. using SCB hydrolysates with corn steep liquor (2%) accounted for the maximum cell growth (8.65 g/L) and PHA accumulation (61.5%) with PHB titer of (5.31 g/L) under optimal conditions. The produced biopolymer was studied by Fourier Transform Infrared (FTIR) spectroscopy and the results revealed the obtained to be PHB. Thus Lysinibaciluus sp. exhibits high potential in industrial scale manufacture of PHB using SCB as an inexpensive substrate.

α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase.

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

Thiolation of Chitosan Loaded over Super-Magnetic Halloysite Nanotubes for Enhanced Laccase Immobilization.

This study focuses on the development of a nanosupport based on halloysite nanotubes (HNTs), Fe3O4 nanoparticles (NPs), and thiolated chitosan (CTs) for laccase immobilization. First, HNTs were modified with Fe3O4 NPs (HNTs-Fe3O4) by the coprecipitation method. Then, the HNTs-Fe3O4 surface was tuned with the CTs (HNTs-Fe3O4-CTs) by a simple refluxing method. Finally, the HNTs- Fe3O4-CTs surface was thiolated (-SH) (denoted as; HNTs- Fe3O4-CTs-SH) by using the reactive NHS-ester reaction. The thiol-modified HNTs (HNTs- Fe3O4-CTs-SH) were characterized by FE-SEM, HR-TEM, XPS, XRD, FT-IR, and VSM analyses. The HNTs-Fe3O4-CTs-SH was applied for the laccase immobilization. It gave excellent immobilization of laccase with 100% activity recovery and 144 mg/g laccase loading capacity. The immobilized laccase on HNTs-Fe3O4-CTs-SH (HNTs-Fe3O4-CTs-S-S-Laccase) exhibited enhanced biocatalytic performance with improved thermal, storage, and pH stabilities. HNTs-Fe3O4-CTs-S-S-Laccase gave outstanding repeated cycle capability, at the end of the 15th cycle, it kept 61% of the laccase activity. Furthermore, HNTs-Fe3O4-CTs-S-S-Laccase was applied for redox-mediated removal of textile dye DR80 and pharmaceutical compound ampicillin. The obtained result marked the potential of the HNTs-Fe3O4-CTs-S-S-Laccase for the removal of hazardous pollutants. This nanosupport is based on clay mineral HNTs, made from low-cost biopolymer CTs, super-magnetic in nature, and can be applied in laccase-based decontamination of environmental pollutants. This study also gave excellent material HNTs-Fe3O4-CTs-SH for other enzyme immobilization processes.

Chitosan-Grafted Halloysite Nanotubes-Fe3O4 Composite for Laccase-Immobilization and Sulfamethoxazole-Degradation.

A surface-engineered nano-support for enzyme laccase-immobilization was designed by grafting the surface of halloysite nanotubes (HNTs) with Fe3O4 nanoparticles and chitosan. Herein, HNTs were magnetized (HNTs-M) by a cost-effective reduction-precipitation method. The synthesized HNTs-M were grafted with 0.25%, 0.5%, 1%, and 2% chitosan (HNTs-M-chitosan), respectively. Synthesized HNTs-M-chitosan (0.25%), HNTs-M-chitosan (0.5%), HNTs-M-chitosan (1%) and HNTs-M-chitosan (2%) were linked with glutaraldehyde (GTA) for laccase immobilization. Among these formulations, HNTs-M-chitosan (1%) exhibited the highest laccase immobilization with 95.13% activity recovery and 100.12 mg/g of laccase loading. The optimized material was characterized thoroughly by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analysis. The immobilized laccase (HNTs-M-chitosan (1%)-GTA-Laccase) exhibited higher pH, temperature, and storage stabilities. The HNTs-M-chitosan (1%)-GTA-Laccase possesses excellent reusability capabilities. At the end of 10 cycles of the reusability experiment, HNTs-M-chitosan (1%)-GTA-Laccase retained 59.88% of its initial activity. The immobilized laccase was utilized for redox-mediated degradation of sulfamethoxazole (SMX), resulting in 41%, 59%, and 62% degradation of SMX in the presence of 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), guaiacol (GUA), and syringaldehyde (SA), respectively. Repeated SMX degradation (57.10% after the sixth cycle) confirmed the potential of HNTs-M-chitosan (1%)-GTA-Laccase for environmental pollutant degradation. Thus, we successfully designed chitosan-based, rapidly separable super-magnetic nanotubes for efficacious enhancement of laccase biocatalysis, which can be applied as nano-supports for other enzymes.

Utilization of Noxious Weed Water Hyacinth Biomass as a Potential Feedstock for Biopolymers Production: A Novel Approach.

This study aims to utilize a noxious weed water hyacinth biomass (WH) for polyhydroxybutyrate (PHB) production. Alkaline and peracetic acid pretreatment was employed for the hydrolysis of WH and consequently enzymatic saccharification to produce fermentable sugars for PHB production. The pretreatment competence was determined using various operational parameters. By applying ambient conditions, alkaline pretreatment gave higher lignin removal of 65.0%, with 80.8% hydrolysis yield, and on enzyme hydrolysis (40 FPU/g of dry WH), produced total reducing sugar of about 523 mg/g of WH. The resulted WH enzymatic hydolysates were evaluated for the production of PHB by Ralstonia eutropha (ATCC 17699). The WH hydrolysates cultivation was compared to synthetic hydrolysates that contain a similar carbon composition in terms of bacterial growth and PHB synthesis. The effects of various supplements to enhance PHB production were estimated. Supplementation of corn steep liquor (CSL) as a cheap nitrogen source with WH hydrolysates favored a higher amount of PHB synthesis (73%), PHB titer of 7.30 g/L and PHB yield of 0.429 g/g of reducing sugar. Finally, using standard analytical tools, the physical and thermal characteristics of the extracted PHB were evaluated. The findings revealed WH was a promising and technically feasible option for transforming biomass into sustainable biopolymer conversion on a large scale.

Effect of inducers on the decolorization and biodegradation of textile azo dye Navy blue 2GL by Bacillus sp. VUS.

Bacillus sp. VUS decolorized azo dye Navy blue 2GL in 48 h at static anoxic condition in yeast extract medium, whereas it took only 18 h for the decolorization in presence of CaCl(2). Different inducers played role in the decolorization of Navy blue 2GL. CaCl(2) found to be the most effective inducer among all inducers tested. The activity of enzymes like lignin peroxidase, laccase and reductases viz. NADH-DCIP, azo and riboflavin induced during decolorization represents their role in the biodegradation. Extracellular LiP and intracellular laccase activity induced with CaCl(2). Yeast extract was best medium for faster decolorization than other media. UV-vis spectrophotometer analysis and visual examinations showed decolorization of dye. High performance liquid chromatography, Fourier transforms infrared spectroscopy showed degradation of dye. Gas Chromatography-Mass Spectroscopy revealed formation of 4-Amino-3-(2-bromo-4, 6-dinitro-phenylazo)-phenol and acetic acid 2-(-acetoxy-ethylamino)-ethyl ester as final products. Bacillus sp. VUS also decolorized synthetic effluent. Phytotoxicity study showed detoxification of Navy blue 2GL.

Pretreatment of kenaf (Hibiscus cannabinus L.) biomass feedstock for polyhydroxybutyrate (PHB) production and characterization.

Kenaf biomass (KB) was employed as feedstock for the synthesis of polyhydroxybutyrate (PHB) using Ralstonia eutropha to replace conventional petroleum-derived polymers. Various pretreatments followed by enzymatic saccharification were applied to release monomeric sugars from KB for PHB production. The effects of increasing concentration of Na2CO3 + Na2SO3 (NaC + NaS) pretreated KB hydrolysates (20-40 g/L) on PHB production were investigated. NaC + NaS pretreated KB hydrolysates (30 g/L) exhibited maximum 70.0% PHA accumulation, with PHB titers of 10.10 g/L and PHB yields of about 0.488 g/g of reducing sugar produced within 36 h of fermentation. PHA accumulation, PHB yield and R. eutropha growth performance using KB hydrolysates were found to be comparable with those of synthetic sugar mixture. Characterization of the produced PHB in terms of crystalline structure, and thermal properties was done using various analytical techniques and results coincide with standard PHB. Thus, green liquor pretreated KB hydrolysates deliver a promising and economically feasible carbon substrate for PHB production.

Green-Synthesis of Anisotropic Peptone-Silver Nanoparticles and Its Potential Application as Anti-Bacterial Agent.

This study demonstrates a green-route-based synthesis of high-concentration suspensions of anisotropic silver nanoparticles (AgNPs) by peptone (Pep), a soluble protein hydrolysate and an abundantly used nutrient source in microbial-media. The transformation of Ag ions from solution into a high-concentration suspension of anisotropic Pep-AgNPs, at an extremely low concentration of peptone (0.02%), indicates that the present green-route synthesis method follows "low volume high concentration nano-synthesis", and, hence, enhances the economic significance of the process. Process optimization with different concentrations of AgNPs (1⁻5 mM), NaOH solution (5⁻40 mM), and peptone (0.004%⁻0.12%) gave the optimized Pep-AgNPs synthesis at 3 mM of AgNO3, 20 mM of NaOH, and 0.02% of the peptone concentrations. The green-route synthesized Pep-AgNPs were structurally characterized by the TEM, XPS, FT-IR, and XRD analyses. The Pep-AgNPs against the clinically relevant bacteria Escherichia coli and Staphylococcus aureus gave significant anti-bacterial properties, with a MIC (minimum inhibitory concentration) of 100 ppm. The colony counting and morphological observation of the bacterial cell under SEM corroborated an anti-bacterial potential of the Pep-AgNPs. Therefore, Pep-AgNPs are green-route synthesized, anisotropic, and have a significant anti-bacterial potential that can be used in many relevant applications.

Biodegradation of Direct Red 5B, a textile dye by newly isolated Comamonas sp. UVS.

Soil samples collected from the vicinity of "Manpasand textile industry", located near Ichalkaranji, India were studied for screening and isolation of bacterial strains capable of degradation of textile dyes. A potential strain was selected on the basis of rapid dye degradation and later identified as Comamonas sp. UVS. Comamonas sp. UVS showed 100% decolorization of Direct Red 5B (DR5B) dye at 40 degrees C and pH 6.5. The maximum Direct Red 5B concentration decolorized was 1,100 mg/l in nutrient broth within 125 h. A numerical simulation with the Michaelis-Menten kinetics model gives an optimal value of 16.01+/-0.36 mg dye/g cell/h for maximum rate (V(max)) and 7.97+/-0.21 mg/l for the Michaelis constant (K(m)). The induction in the activities of laccase and LiP was observed during decolorization. These enzymes were inhibited by the addition of sodium azide. The biodegradation was monitored by UV-vis, FTIR spectroscopy and HPLC. The GCMS analysis indicated the presence of 7-benzoylamino-3-diazenyl-4-hydroxy-naphthalene-2-sulfonic acid in degraded product of the dye. The germination of Triticum aestivum seeds was inhibited with DR5B treatment but not with the treatment of dye degradation products.

Combined effect of inorganic salts with calcium peroxide pretreatment for kenaf core biomass and their utilization for 2,3-butanediol production.

This study focuses on development of calcium peroxide (CaO2) pretreatment that removes major part of lignin but retaining most of sugar components of kenaf core powder (KCP) biomass. In chemical pretreatment, usually higher loss of biomass occurs which was less during this pretreatment strategy. Supplementation of inorganic salts; manganese sulfate (MnSO4) and cobalt chloride (COCl2) in CaO2 pretreatment resulted in maximum delignification of KCP relative to individual CaO2 pretreatment. Maximum glucose yield (98%) and hydrolysis yield (80.5%) was achieved after enzymatic hydrolysis (30 FPU/g of KCP) under optimized conditions. Analytical results proved effective lignin removal and significant destruction of KCP with this pretreatment strategy. Finally, utilization of KCP enzymatic hydrolysates by developed strain Klebsiella pneumoniae KMK05 resulted in maximum 2,3-butanediol (BDO) production (10.42 g/L) and BDO titer (0.385 g/g of sugar). BDO titer achieved with KCP derived sugars were found comparable with the mixture of standard sugars which is notable.

Paper waste extracted α-cellulose fibers super-magnetized and chitosan-functionalized for covalent laccase immobilization.

Enormous disposal of paper wastes (PW) causing number of environmental problems. PW is efficiently used to extract multifunctional α-cellulose fibers (αCFs). Thus, αCFs extraction from PW, and functionalization with Fe3O4 and chitosan were successfully performed for immobilization of laccase. Therefore, in this investigation, PW extracted αCFs were tuned with supermagnetic Fe3O4 (M) and functionalized with chitosan (CTA) (M-PW-αCF-CTA). Furthermore, M-PW-αCF-CTA was glutaraldehyde cross-linked for covalent laccase immobilization. The synthesized materials were characterized by FT-IR, TGA, FE-SEM, FE-HR-TEM and VSM analyzes. M-PW-αCF-CTA exhibited magnetic saturation value of 14.72 emu/g. Laccase immobilized on M-PW-αCF-CTA (M-PW-αCF-CTA-Lac) gave 92% of activity recovery and loading capacity of 73.30 mg/g. M-PW-αCF-CTA-Lac showed excellent pH, temperature, and storage stabilities with the exceptional reusability potential. Moreover, M-PW-αCF-CTA-Lac was applied for repeated removal of carcinogenic Direct Red 28 (DR28). Therefore, M-PW-αCF-CTA-Lac is green and economical biocatalyst with extraordinary separation potential can be enforced for environmental pollutants reclamation.

A comprehensive review on green nanomaterials using biological systems: Recent perception and their future applications.

Over the last few years, nanotechnology is increasingly developing in scientific sector, which has attracted a great deal of interest because of its abundant applications in almost all the areas. In recent times, green nanotechnology is a relative and multidisciplinary field that has emerged as a rapidly developing research area. This is serving as an important technique that spotlight on making the procedure which is clean, safe and in particular environtmentally friendly, in a gap with the currently employed methods such as chemical and physical methods for nanosynthesis. The present review recaps the existing knowledge on various biogenic synthesis methods relying on bacteria, fungi, yeast, algae, viruses and on using biomolecules. The green nanosynthesis refers to the employment of reducing and stabilizing agents from plants and other natural resources, to fabricate nanomaterials. The green synthesis method does not engage the use of exceedingly venomous chemicals or elevated energy inputs during the synthesis. Nanoparticles (NPs) with distinct shapes, sizes and bioactivity can be produced from the variations in the bio-reducing agents employed for nanosynthesis. Hence, this review article summarizes the present information regarding the biological methods which are employed to fabricate greener, safer, and environmentally sustainable nanosynthesis routes. This review mainly highlights the wide-scale fabrication of NPs via green synthesis for biomedical and agricultural applications.

Exploiting fruit byproducts for eco-friendly nanosynthesis: Citrus × clementina peel extract mediated fabrication of silver nanoparticles with high efficacy against microbial pathogens and rat glial tumor C6 cells.

Process byproducts from the fruit industry may represent a cheap and reliable source of green reducing agents to be used in current bio-nanosynthesis. This study reports the use of orange (Citrus × clementina) peel aqueous extract (OPE) for one-pot green synthesis of silver nanoparticles (AgNPs) with high effectiveness against various microbial pathogens as well as rat glial tumor C6 cells. The effects of various operational parameters on the synthesis of AgNPs were systematically investigated. The morphology, particle size, and properties of synthesized AgNPs were characterized using UV-visible spectroscopy, x-ray diffraction, x-ray photoelectron spectroscopy, field emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, and Fourier transform infrared spectroscopy. High-resolution transmission electron microscopy shows that the nanoparticles are mostly spherical in shape and monodispersed, with an average particle size of 15-20 nm. Notably, the OPE-synthesized AgNPs were stable up to 6 months without change in their properties. Low doses of OPE-AgNPs inhibited the growth of human pathogens Escherichia coli, Bacillus cereus, and Staphylococcus aureus. The minimum inhibitory concentration and minimum bactericidal concentration of AgNPs against selected pathogenic bacteria were determined. OPE-AgNPs exhibited strong antioxidant activity in terms of ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) radical scavenging (IC50 49.6 µg/mL) and DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging (IC50 63.4 µg/mL). OPE-AgNPs showed dose-dependent response against rat glial tumor C6 cells (LD50 60 µg/mL) showing a promising potential as anticancer agents. Overall, the current investigation highlighted a cheap green technology route to synthesize AgNPs using OPE byproducts and could potentially be utilized in biomedical, cosmetic, and pharmaceutical industry.

Biochemical characteristics of a textile dye degrading extracellular laccase from a Bacillus sp. ADR.

Bacillus sp. ADR secretes an extracellular laccase in nutrient broth, and this enzyme was purified up to 56-fold using acetone precipitation and DEAE-cellulose anion exchange chromatography. The molecular weight of purified laccase was estimated to be 66 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis. The purified laccase oxidized 2,6-dimethoxy phenol, o-tolidine, hydroquinone, L-DOPA and guaiacol. The optimum pH for oxidation of o-tolidine, 2,6-dimethoxy phenol and guaiacol were 3.0, 4.0 and 5.0, respectively. The purified laccase contained 2.7 mol/mol of copper. The laccase was stable up to 40 °C and within the pH range of 7.0-9.0. Well-known inhibitors of multicopper oxidases such as, sodium azide, L-cysteine and dithiothreitol showed significant inhibition of laccase activity. The purified enzyme decolorized structurally different azo dyes with variable decolorization rates and efficiencies of 68-90%. This study is useful for understanding the precise use of Bacillus sp. ADR in the decolorization of textile dyes containing industrial wastewater.

Thiazolidinediones as a novel class of algicides against red tide harmful algal species.

This paper reports the synthesis of 28 thiazolidinedione derivatives along with their algicidal activity against microalgae causing harmful algal blooming. Among the 28 compounds tested, most showed effective algicidal activity against Heterosigma akashiwo, Chattonella marina, and Cochlodinium polykrikoides, while non-harmful algae were relatively tolerant to these thiazolidinedione derivatives. Compounds 6, 13, and 22 were the most potent against C. polykrikoides with IC50 values <0.5 µM. Among the thiazolidinedione derivatives tested, compounds 7, 13, 27, and 28 were extremely competent and selective to C. polykrikoides with IC50 values ranging from 0.1 to 2 µM, while C. marina and H. akashiwo showed an IC50 value ranging from 30 to 130 µM. These results show that some thiazolidinedione derivatives can act as potent algicides against harmful algal blooms.