Accuracy of low-dose proton CT image registration for pretreatment alignment verification in reference to planning proton CT.

PURPOSE: Proton CT (pCT) has the ability to reduce inherent uncertainties in proton treatment by directly measuring the relative proton stopping power with respect to water, thereby avoiding the uncertain conversion of X-ray CT Hounsfield unit to relative stopping power and the deleterious effect of X- ray CT artifacts. The purpose of this work was to further evaluate the potential of pCT for pretreatment positioning using experimental pCT data of a head phantom. METHODS: The performance of a 3D image registration algorithm was tested with pCT reconstructions of a pediatric head phantom. A planning pCT simulation scan of the phantom was obtained with 200 MeV protons and reconstructed with a 3D filtered back projection (FBP) algorithm followed by iterative reconstruction and a representative pretreatment pCT scan was reconstructed with FBP only to save reconstruction time. The pretreatment pCT scan was rigidly transformed by prescribing random errors with six degrees of freedom or deformed by the deformation field derived from a head and neck cancer patient to the pretreatment pCT reconstruction, respectively. After applying the rigid or deformable image registration algorithm to retrieve the original pCT image before transformation, the accuracy of the registration was assessed. To simulate very low-dose imaging for patient setup, the proton CT images were reconstructed with 100%, 50%, 25%, and 12.5% of the total number of histories of the original planning pCT simulation scan, respectively. RESULTS: The residual errors in image registration were lower than 1 mm and 1° of magnitude regardless of the anatomic directions and imaging dose. The mean residual errors ranges found for rigid image registration were from -0.29 ± 0.09 to 0.51 ± 0.50 mm for translations and from -0.05 ± 0.13 to 0.08 ± 0.08 degrees for rotations. The percentages of sub-millimetric errors found, for deformable image registration, were between 63.5% and 100%. CONCLUSION: This experimental head phantom study demonstrated the potential of low-dose pCT imaging for 3D image registration. Further work is needed to confirm the value pCT for pretreatment image-guided proton therapy.

A Fast Experimental Scanner for Proton CT: Technical Performance and First Experience with Phantom Scans.

We report on the design, fabrication, and first tests of a tomographic scanner developed for proton computed tomography (pCT) of head-sized objects. After extensive preclinical testing, pCT is intended to be employed in support of proton therapy treatment planning and pre-treatment verification in patients undergoing particle-beam therapy. The scanner consists of two silicon-strip telescopes that track individual protons before and after the phantom, and a novel multistage scintillation detector that measures a combination of the residual energy and range of the proton, from which we derive the water equivalent path length (WEPL) of the protons in the scanned object. The set of WEPL values and the associated paths of protons passing through the object over a 360° angular scan are processed by an iterative, parallelizable reconstruction algorithm that runs on modern GP-GPU hardware. In order to assess the performance of the scanner, we have performed tests with 200 MeV protons from the synchrotron of the Loma Linda University Medical Center and the IBA cyclotron of the Northwestern Medicine Chicago Proton Center. Our first objective was calibration of the instrument, including tracker channel maps and alignment as well as the WEPL calibration. Then we performed the first CT scans on a series of phantoms. The very high sustained rate of data acquisition, exceeding one million protons per second, allowed a full 360° scan to be completed in less than 10 minutes, and reconstruction of a CATPHAN 404 phantom verified accurate reconstruction of the proton relative stopping power in a variety of materials.

An objective measure of response on whole-body MRI in metastatic hormone sensitive prostate cancer treated with androgen deprivation therapy, external beam radiotherapy, and radium-223.

OBJECTIVES: The aim of this study was to generate an objective method to describe MRI data to assess response in the vertebrae of patients with metastatic hormone sensitive prostate cancer (mHSPC), treated with external beam radiation therapy and systemic therapy with Radium-223 and to correlate changes with clinical outcomes. METHODS: Three sets of whole-body MRI (WBMRI) images were utilized from 25 patients from the neo-adjuvant Androgen Deprivation Therapy pelvic Radiotherapy and RADium-223 (ADRRAD) clinical trial: MRI1 (up to 28 days before Radium-223), MRI2, and MRI3 (2 and 6 months post completion of Radium-223). Radiological response was assessed based on post baseline MRI images. Vertebrae were semi-automatically contoured in the sagittal T1-weighted (T1w) acquisitions, MRI intensity was measured, and spinal cord was used to normalize the measurements. The relationship between MRI intensity vs time to biochemical progression and radiology response was investigated. Survival curves were generated and splitting measures for survival and biochemical progression investigated. RESULTS: Using a splitting measure of 1.8, MRI1 was found to be a reliable quantitative indicator correlating with overall survival (P = 0.023) and biochemical progression (P = 0.014). MRI (3-1) and MRI (3-2) were found to be significant indicators for patients characterized by progressive/non-progressive disease (P = 0.021, P = 0.004) and biochemical progression within/after 12 months (P = 0.007, P = 0.001). CONCLUSIONS: We have identified a potentially useful objective measure of response on WBMRI of vertebrae containing bone metastases in mHSPC which correlates with survival/progression (prognostic) and radiology response (predictive). ADVANCES IN KNOWLEDGE: Measurements of T1w WBMRI normalized intensity may allow identifying potentially useful response biomarkers correlating with survival, radiological response and biochemical progression.

Validation of a Quality Metric Score to Assess the Placement of Hydrogel Rectal Spacer in Patients Treated With Prostate Stereotactic Radiation Therapy.

Purpose: To evaluate the quality of the interspace between the prostate and rectum and assess the effect on the dose to the rectum by measuring the spacer quality score (SQS) before and after implanting a hydrogel rectal spacer. Methods and Materials: Thirty patients with prostate cancer were treated with stereotactic ablative body radiation therapy as part of the SPORT clinical trial. Each patient had a 10 mL polyethylene glycol hydrogel spacer inserted transperineally. Computed tomography scans were acquired before and after spacer insertion, 10MV flattening filter free (FFF) stereotactic ablative body radiation therapy (SABR) treatment plans were generated using each image set. To calculate the SQS, the prostate-rectal interspace (PRI) was measured in the anterior-posterior orientation, parallel to the anatomic midline at the prostate base, apex, and midgland on the prespacer and postspacer computed tomography. Measurements were taken in 3 transverse positions between the prostate and the rectum, and PRI scores of 0, 1, and 2 were assigned if the interspace between prostate and rectum was <0.3, 0.3 to 0.9, or ≥1 cm, respectively. The overall SQS was the lowest of the PRI scores. Differences between prespacer and postspacer PRIs and SQS were investigated by performing Fisher's exact test and differences between doses to the rectum were investigated by performing the paired samples Wilcoxon rank-sum test and Student t test. Results: Statistically significant differences between prespacer versus postspacer patients were found when grouping patients according to their overall SQS. The PRI summary score did not reach statistical significance between prespacer and postspacer at the base but was significantly higher for the prostate midline and apex. Statistically significant differences in some rectum dose-volume metrics were found when grouping patients according to their PRIs and SQS. Conclusions: SQS before and after the spacer insertion was evaluated and was found to be correlated with pre- and postspacer rectal dosimetry. Sources of improvement of the SQS scoring metric and limitations are discussed.

Association between statin therapy dose intensity and radiation cardiotoxicity in non-small cell lung cancer: Results from the NI-HEART study.

INTRODUCTION: Radiation cardiotoxicity is a dose-limiting toxicity and major survivorship issue for patients with non-small cell lung cancer (NSCLC) completing curative-intent radiotherapy, however patients' cardiovascular baseline is not routinely optimised prior to treatment. In this study we examined the impact of statin therapy on overall survival and post-radiotherapy cardiac events. METHODS: Patients treated between 2015-2020 at a regional center were identified. Clinical notes were interrogated for baseline patient, tumor and cardiac details, and both follow-up cancer control and cardiac events. Three cardiologists verified cardiac events. Radiotherapy planning scans were retrieved for application of validated deep learning-based autosegmentation. Pre-specified Cox regression analyses were generated with varying degrees of adjustment for overall survival. Fine and Gray regression for the risk of cardiac events, accounting for the competing risk of death and cardiac covariables was undertaken. RESULTS: Statin therapy was prescribed to 59% of the 478 included patients. The majority (88%) of patients not prescribed a statin had at least one indication for statin therapy according to cardiovascular guidelines. In total, 340 patients (71%) died and 79 patients (17%) experienced a cardiac event. High-intensity (HR 0.68, 95%CI 0.50-0.91, p = 0.012) and medium-intensity (HR 0.70, 95%CI 0.51-0.97, p = 0.033) statin therapy were associated with improved overall survival after adjustment for patient, cancer, treatment, response and cardiovascular clinical factors. There were no consistent differences in the rate or grade of cardiac events according to statin intensity. CONCLUSIONS: Statin therapy is associated with improved overall survival in patients receiving curative-intent radiotherapy for NSCLC, and there is evidence of a dose-response relationship. This study highlights the importance of a pre-treatment cardiovascular risk assessment in this cohort. Further studies are needed to examine if statin therapy is cardioprotective in patients undergoing treatment for NSCLC with considerable incidental cardiac radiation dose and a low baseline cardiac risk.

Inclusive Path Through Pavia: A Study to Link the Langobardic Heritage.

The Italian historic centers have an architectural and archeological heritage widespread in the urban structure, which is not always easily accessible due to the orography and materials the streets and the squares are paved with. The topic of the urban accessibility is extremely complex and not easy to solve, also because the removal and overcoming of the architectural and sensorial barriers that could alter the original layout and consolidated historical memory must be avoided. The research investigates the accessibility and usability conditions of the urban environment between the Langobardic building and archeological sites in Pavia (Italy) to identify pedestrian routes that can be covered by weak persons in autonomy or with the help of a companion. The analysis and synthesis of the urban environment produce some maps which report the level of accessibility of the streets and allow to identify the best route between the Langobardic masterpieces in the downtown. The adopted evaluation system is the result of an investigation methodology defined and consolidated over the years by the activities of a group of researchers from the University of Pavia and is independent of the heritage of Langobardic origin; the same methodology can also be used to other types of widespread heritage in the historic center of the city (Romanesque, Lombard Gothic, etc.). The same methodology can be exported to other historical centers and can constitute the tool for the promotion of the architectural and archaeological heritage.

The role of Monte Carlo simulation in understanding the performance of proton computed tomography.

Proton computed tomography (pCT) is a promising tomographic imaging modality allowing direct reconstruction of proton relative stopping power (RSP) required for proton therapy dose calculation. In this review article, we aim at highlighting the role of Monte Carlo (MC) simulation in pCT studies. After describing the requirements for performing proton computed tomography and the various pCT scanners actively used in recent research projects, we present an overview of available MC simulation platforms. The use of MC simulations in the scope of investigations of image reconstruction, and for the evaluation of optimal RSP accuracy, precision and spatial resolution omitting detector effects is then described. In the final sections of the review article, we present specific applications of realistic MC simulations of an existing pCT scanner prototype, which we describe in detail.

Validation of an established deep learning auto-segmentation tool for cardiac substructures in 4D radiotherapy planning scans.

Background: Emerging data suggest that dose-sparing several key cardiac regions is prognostically beneficial in lung cancer radiotherapy. The cardiac substructures are challenging to contour due to their complex geometry, poor soft tissue definition on computed tomography (CT) and cardiorespiratory motion artefact. A neural network was previously trained to generate the cardiac substructures using three-dimensional radiotherapy planning CT scans (3D-CT). In this study, the performance of that tool on the average intensity projection from four-dimensional (4D) CT scans (4D-AVE), now commonly used in lung radiotherapy, was evaluated. Materials and Methods: The 4D-AVE of n=20 patients completing radiotherapy for lung cancer 2015-2020 underwent manual and automated cardiac substructure segmentation. Manual and automated substructures were compared geometrically and dosimetrically. Two senior clinicians also qualitatively assessed the auto-segmentation tool's output. Results: Geometric comparison of the automated and manual segmentations exhibited high levels of similarity across parameters, including volume difference (11.8% overall) and Dice similarity coefficient (0.85 overall), and were consistent with 3D-CT performance. Differences in mean (median 0.2 Gy, range -1.6-0.3 Gy) and maximum (median 0.4 Gy, range -2.2-0.9 Gy) doses to substructures were generally small. Nearly all structures (99.5 %) were deemed to be appropriate for clinical use without further editing. Conclusions: Cardiac substructure auto-segmentation using a deep learning-based tool trained on a 3D-CT dataset was feasible on the 4D-AVE scan, meaning this tool is suitable for use on 4D-CT radiotherapy planning scans. Application of this tool would increase the practicality of routine clinical cardiac substructure delineation, and enable further cardiac radiation effects research.

Investigating spatial fractionation and radiation induced bystander effects: a mathematical modelling approach.

Radiation induced bystander effects (RIBEs) have been shown to cause death in cells receiving little or no physical dose. In standard radiotherapy, where uniform fields are delivered and all cells are directly exposed to radiation, this phenomenon can be neglected. However, the role of RIBEs may become more influential when heterogeneous fields are considered. Mathematical modelling can be used to determine how these heterogeneous fields might influence cell survival, but most established techniques account only for the direct effects of radiation. To gain a full appreciation of how non-uniform fields impact cell survival, it is also necessary to consider the indirect effects of radiation. In this work, we utilise a mathematical model that accounts for both the direct effects of radiation on cells and RIBEs. This model is used to investigate how spatially fractionated radiotherapy plans impact cell survivalin vitro. These predictions were compared to survival in normal and cancerous cells following exposure to spatially fractionated plans using a clinical linac. The model is also used to explore how spatially fractionated radiotherapy will impact tumour controlin vivo. Results suggest that spatially fractionated plans are associated with higher equivalent uniform doses than conventional uniform plans at clinically relevant doses. The model predicted only small changes changes in normal tissue complication probability, compared to the larger protection seen clinically. This contradicts a central paradigm of radiotherapy where uniform fields are assumed to maximise cell kill and may be important for future radiotherapy optimisation.

3D-printed patient-specific pelvis phantom for dosimetry measurements for prostate stereotactic radiotherapy with dominant intraprostatic lesion boost.

AIM: Developing and assessing the feasibility of using a three-dimensional (3D) printed patient-specific anthropomorphic pelvis phantom for dose calculation and verification for stereotactic ablative radiation therapy (SABR) with dose escalation to the dominant intraprostatic lesions. MATERIAL AND METHODS: A 3D-printed pelvis phantom, including bone-mimicking material, was fabricated based on the computed tomography (CT) images of a prostate cancer patient. To compare the extent to which patient and phantom body and bones overlapped, the similarity Dice coefficient was calculated. Modular cylindrical inserts were created to encapsulate radiochromic films and ionization chamber for absolute dosimetry measurements at the location of prostate and at the boost region. Gamma analysis evaluation with 2%/2mm criteria was performed to compare treatment planning system calculations and measured dose when delivering a 10 flattening filter free (FFF) SABR plan and a 10FFF boost SABR plan. RESULTS: Dice coefficients of 0.98 and 0.91 were measured for body and bones, respectively, demonstrating agreement between patient and phantom outlines. For the boost plans the gamma analysis yielded 97.0% of pixels passing 2%/2mm criteria and these results were supported by the chamber average dose difference of 0.47 ± 0.03%. These results were further improved when overriding the bone relative electron density: 97.3% for the 2%/2mm gamma analysis, and 0.05 ± 0.03% for the ionization chamber average dose difference. CONCLUSIONS: The modular patient-specific 3D-printed pelvis phantom has proven to be a highly attractive and versatile tool to validate prostate SABR boost plans using multiple detectors.

A review of dose calculation approaches with cone beam CT in photon and proton therapy.

BACKGROUND AND PURPOSE: The use of cone beam computed tomography (CBCT) for performing dose calculations in radiation therapy has been widely investigated as it could provide a quantitative analysis of the dosimetric impact of changes in patients during the treatment. The aim of this review was to classify different techniques adopted to perform CBCT dose calculation and to report their dosimetric accuracy with respect to the metrics used. METHODS AND MATERIALS: A literature search was carried out in PubMed and ScienceDirect databases, based upon the following keywords: "cone beam computed tomography", "CBCT", "cone beam CT", "dose calculation", "accuracy". Sixty-nine peer-reviewed relevant articles were included in this review: thirty-one patient studies, fifteen phantom studies and twenty-three patient & phantom studies. Most studies were found to have focused on head and neck, lung and prostate cancers. RESULTS: The techniques adopted to perform CBCT dose calculation have been grouped in six categories labelled as (1) pCT calibration, (2) CBCT calibration, (3) HU override, (4) Deformable image registration, (5) Dose deformation, and (6) Combined techniques. Differences between CBCT dose and reference dose were reported both for target volumes and OARs. CONCLUSIONS: A comparison among the available techniques for CBCT dose calculations is challenging as many variables are involved. Therefore, a set of reporting standards is recommended to enable meaningful comparisons among different studies. The accuracy of the results was strongly dependent on the image quality, regardless of the methods used, highlighting the need for dose validation and quality assurance standards.

An evaluation of techniques for dose calculation on cone beam computed tomography.

OBJECTIVE:: To assess the accuracy and efficiency of four different techniques, thus determining the optimum method for recalculating dose on cone beam CT (CBCT) images acquired during radiotherapy treatments. METHODS:: Four established techniques were investigated and their accuracy assessed via dose calculations: (1) applying a standard planning CT (pCT) calibration curve, (2) applying a CBCT site-specific calibration curve, (3) performing a density override and (4) using deformable registration. Each technique was applied to 15 patients receiving volumetric modulated arc therapy to one of three treatment sites, head and neck, lung and prostate. Differences between pCT and CBCT recalculations were determined with dose volume histogram metrics and 2.0%/0.1 mm gamma analysis using the pCT dose distribution as a reference. RESULTS:: Dose volume histogram analysis indicated that all techniques yielded differences from expected results between 0.0 and 2.3% for both target volumes and organs at risk. With volumetric gamma analysis, the dose recalculation on deformed images yielded the highest pass-rates. The median pass-rate ranges at 50% threshold were 99.6-99.9%, 94.6-96.0%, and 94.8.0-96.0% for prostate, head and neck and lung patients, respectively. CONCLUSION:: Deformable registration, HU override and site-specific calibration curves were all identified as dosimetrically accurate and efficient methods for dose calculation on CBCT images. ADVANCES IN KNOWLEDGE:: With the increasing adoption of CBCT, this study provides clinical radiotherapy departments with invaluable information regarding the comparison of dose reconstruction methods, enabling a more accurate representation of a patient's treatment. It can also integrate studies in which CBCT is used in image-guided radiation therapy and for adaptive radiotherapy planning processes.

A novel active-passive sampling approach for measuring time-averaged concentrations of pollutants in water.

Passive sampling with in situ devices offers several advantages over traditional sampling methods (i.e., discrete spot sampling), however, data interpretation from conventional passive samplers is hampered by difficulties in estimating the thickness of the diffusion layer at the sampler/medium interface (δ), often leading to inaccurate determinations of target analyte concentrations. In this study, the performance of a novel device combining active and passive sampling was investigated in the laboratory. The active-passive sampling (APS) device is comprised of a diffusion cell fitted with a pump and a flowmeter. Three receiving phases traditionally used in passive sampling devices (i.e., chelex resin, Oasis HLB, and silicone rubber), were incorporated in the diffusion cell and allowed the simultaneous accumulation of cationic metals, polar, and non-polar organic compounds, respectively. The flow within the diffusion cell was accurately controlled and monitored, and, combined with diffusion coefficients measurements, enabled the average δ to be estimated. Strong agreement between APS and time-averaged total concentrations measured in discrete water samples was found for most of the substances investigated. Accuracies for metals ranged between 87 and 116%, except Cu and Pb (∼50%), whilst accuracies between 64 and 101%, and 92 and 151% were achieved for polar and non-polar organic compounds, respectively. These results indicate that, via a well-defined in situ preconcentration step, the proposed APS approach shows promise for monitoring the concentration of a range of pollutants in water.

Software platform for simulation of a prototype proton CT scanner.

PURPOSE: Proton computed tomography (pCT) is a promising imaging technique to substitute or at least complement x-ray CT for more accurate proton therapy treatment planning as it allows calculating directly proton relative stopping power from proton energy loss measurements. A proton CT scanner with a silicon-based particle tracking system and a five-stage scintillating energy detector has been completed. In parallel a modular software platform was developed to characterize the performance of the proposed pCT. METHOD: The modular pCT software platform consists of (1) a Geant4-based simulation modeling the Loma Linda proton therapy beam line and the prototype proton CT scanner, (2) water equivalent path length (WEPL) calibration of the scintillating energy detector, and (3) image reconstruction algorithm for the reconstruction of the relative stopping power (RSP) of the scanned object. In this work, each component of the modular pCT software platform is described and validated with respect to experimental data and benchmarked against theoretical predictions. In particular, the RSP reconstruction was validated with both experimental scans, water column measurements, and theoretical calculations. RESULTS: The results show that the pCT software platform accurately reproduces the performance of the existing prototype pCT scanner with a RSP agreement between experimental and simulated values to better than 1.5%. CONCLUSIONS: The validated platform is a versatile tool for clinical proton CT performance and application studies in a virtual setting. The platform is flexible and can be modified to simulate not yet existing versions of pCT scanners and higher proton energies than those currently clinically available.