Deciphering the mode of action of the synthetic antimicrobial peptide Bac8c.

Bac8c (RIWVIWRR-NH(2)) is an 8-amino-acid peptide derived from Bac2A (RLARIVVIRVAR-NH(2)), a C3A/C11A variant of the naturally occurring bovine peptide, bactenecin (also known as bovine dodecapeptide), the smallest peptide with activity against a range of pathogenic Gram-positive and Gram-negative bacteria, as well as yeast. The effects of Bac8c on Escherichia coli were examined by studying its bacteriostatic and bactericidal properties, demonstrating its effects on proton motive force generation, and visually analyzing (via transmission electron microscopy) its effects on cells at different concentrations, in order to probe the complexities of the mechanism of action of Bac8c. Results were consistent with a two-stage model for the Bac8c mode of action. At sublethal concentrations (3 µg/ml), Bac8c addition resulted in transient membrane destabilization and metabolic imbalances, which appeared to be linked to inhibition of respiratory function. Although sublethal concentrations resulted in deleterious downstream events, such as methylglyoxal formation and free radical generation, native E. coli defense systems were sufficient for full recovery within 2 h. In contrast, at the minimal bactericidal concentration (6 µg/ml), Bac8c substantially but incompletely depolarized the cytoplasmic membrane within 5 min and disrupted electron transport, which in turn resulted in partial membrane permeabilization and cell death.

Ribosome binding sites visualized on freeze-fractured membranes of the rough endoplasmic reticulum.

Freeze-fracture micrographs of cells of the green alga Micrasterias denticulata stabilized by ultrarapid freezing reveal imprints of polysomes on the rough endoplasmic reticulum membranes. The imprints appear as broad, spiral ridges on the P faces and as corresponding wide grooves on the E faces of the membranes. Distinct 110-A particles with a spacing of 270 +/- 45 A are associated with the P-face ridges. Where imprints of individual ribosomes can be discerned, it is seen that there is a 1:1 relationship between the ribosomes and the 110-A particles, and that the 110-A particles are located in a peripheral position with respect to the polysome spirals. We propose that the 110-A particles could be structural equivalents of ribosome-binding sites, consisting of a molecule each of ribophorins I and II and a nascent polypeptide chain. These observations suggest that the spiral form of polysomes could result from the forces generated by the extrusion of the growing polypeptide chains to one side of the polysome.

Cytokinesis in tobacco BY-2 and root tip cells: a new model of cell plate formation in higher plants.

Cell plate formation in tobacco root tips and synchronized dividing suspension cultured tobacco BY-2 cells was examined using cryofixation and immunocytochemical methods. Due to the much improved preservation of the cells, many new structural intermediates have been resolved, which has led to a new model of cell plate formation in higher plants. Our electron micrographs demonstrate that cell plate formation consists of the following stages: (1) the arrival of Golgi-derived vesicles in the equatorial plane, (2) the formation of thin (20 +/- 6 nm) tubes that grow out of individual vesicles and fuse with others giving rise to a continuous, interwoven, tubulo-vesicular network, (3) the consolidation of the tubulo-vesicular network into an interwoven smooth tubular network rich in callose and then into a fenestrated plate-like structure, (4) the formation of hundreds of finger-like projections at the margins of the cell plate that fuse with the parent cell membrane, and (5) cell plate maturation that includes closing of the plate fenestrae and cellulose synthesis. Although this is a temporal chain of events, a developing cell plate may be simultaneously involved in all of these stages because cell plate formation starts in the cell center and then progresses centrifugally towards the cell periphery. The "leading edge" of the expanding cell plate is associated with the phragmoplast microtubule domain that becomes concentrically displaced during this process. Thus, cell plate formation can be summarized into two phases: first the formation of a membrane network in association with the phragmoplast microtubule domain; second, cell wall assembly within this network after displacement of the microtubules. The phragmoplast microtubules end in a filamentous matrix that encompasses the delicate tubulo-vesicular networks but not the tubular networks and fenestrated plates. Clathrin-coated buds/vesicles and multivesicular bodies are also typical features of the network stages of cell plate formation, suggesting that excess membrane material may be recycled in a selective manner. Immunolabeling data indicate that callose is the predominant lumenal component of forming cell plates and that it forms a coat-like structure on the membrane surface. We postulate that callose both helps to mechanically stabilize the early delicate membrane networks of forming cell plates, and to create a spreading force that widens the tubules and converts them into plate-like structures. Cellulose is first detected in the late smooth tubular network stage and its appearance seems to coincide with the flattening and stiffening of the cell plate.

Visualization of particle complexes in the plasma membrane of Micrasterias denticulata associated with the formation of cellulose fibrils in primary and secondary cell walls.

Highly ordered arrays of intramembrane particles are observed in freeze-fractured plasma membranes of the green alga Micrasterias denticulata during the synthesis of the secondary cell wall. The observable architecture of the complex consists primarily of a precise hexagonal array of from 3 to 175 rosettes, consisting of 6 particles each, which fracture with the P-face. The complexes are observed at the ends of impressions of cellulose fibrils. The distance between rows of rosettes is equal to the center-to-center distance between parallel cellulose fibrils of the secondary wall. Correlation of the structure of the complex with the pattern of deposition indicates that the size of a given fibril is proportional to the number of rosettes engaged in its formation. Vesicles containing hexagonal arrays of rosettes are found in the cytoplasm and can be observed in the process of fusing with the plasma membrane, suggesting that the complexes are first assembled in the cytoplasm and then incorporated into the plasma membrane, where they become active in fibril formation. Single rosettes appear to be responsible for the synthesis of microfibrils during primary wall growth. Similar rosettes have now been detected in a green alga, in fern protonemata, and in higher plant cells. This structure, therefore, probably represents a significant component of the cellulose synthesizing mechanism in a large variety of plant cells.

The yeast CDC37 gene interacts with MPS1 and is required for proper execution of spindle pole body duplication.

The MPS1 gene from Saccharomyces cerevisiae encodes an essential protein kinase required for spindle pole body (SPB) duplication and for the mitotic spindle assembly checkpoint. Cells with the mps1-1 mutation fail early in SPB duplication and proceed through monopolar mitosis with lethal consequences. We identified CDC37 as a multicopy suppressor of mps1-1 temperature-sensitive growth. Suppression is allele specific, and synthetic lethal interactions occur between mps1 and cdc37 alleles. We examined the cdc37-1 phenotype for defects related to the SPB cycle. The cdc37-1 temperature-sensitive allele causes unbudded, G1 arrest at Start (Reed, S.I. 1980. Genetics. 95: 561-577). Reciprocal shifts demonstrate that cdc37-1 arrest is interdependent with alpha-factor arrest but is not a normal Start arrest. Although the cells are responsive to alpha-factor at the arrest, SPB duplication is uncoupled from other aspects of G1 progression and proceeds past the satellite-bearing SPB stage normally seen at Start. Electron microscopy reveals side-by-side SPBs at cdc37-1 arrest. The outer plaque of one SPB is missing or reduced, while the other is normal. Using the mps2-1 mutation to distinguish between the SPBs, we find that the outer plaque defect is specific to the new SPB. This phenotype may arise in part from reduced Mps1p function: although Mps1p protein levels are unaffected by the cdc37-1 mutation, kinase activity is markedly reduced. These data demonstrate a requirement for CDC37 in SPB duplication and suggest a role for this gene in G1 control. CDC37 may provide a chaperone function that promotes the activity of protein kinases.

Saccharomyces cerevisiae Ndc1p is a shared component of nuclear pore complexes and spindle pole bodies.

We report a novel connection between nuclear pore complexes (NPCs) and spindle pole bodies (SPBs) revealed by our studies of the Saccharomyces cerevisiae NDC1 gene. Although both NPCs and SPBs are embedded in the nuclear envelope (NE) in yeast, their known functions are quite distinct. Previous work demonstrated that NDC1 function is required for proper SPB duplication (Winey, M., M.A. Hoyt, C. Chan, L. Goetsch, D. Botstein, and B. Byers. 1993. J. Cell Biol. 122:743-751). Here, we show that Ndc1p is a membrane protein of the NE that localizes to both NPCs and SPBs. Indirect immunofluorescence microscopy shows that Ndc1p displays punctate, nuclear peripheral localization that colocalizes with a known NPC component, Nup49p. Additionally, distinct spots of Ndc1p localization colocalize with a known SPB component, Spc42p. Immunoelectron microscopy shows that Ndc1p localizes to the regions of NPCs and SPBs that interact with the NE. The NPCs in ndc1-1 mutant cells appear to function normally at the nonpermissive temperature. Finally, we have found that a deletion of POM152, which encodes an abundant but nonessential nucleoporin, suppresses the SPB duplication defect associated with a mutation in the NDC1 gene. We show that Ndc1p is a shared component of NPCs and SPBs and propose a shared function in the assembly of these organelles into the NE.

Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle.

The three dimensional organization of microtubules in mitotic spindles of the yeast Saccharomyces cerevisiae has been determined by computer-aided reconstruction from electron micrographs of serially cross-sectioned spindles. Fifteen spindles ranging in length from 0.6-9.4 microns have been analyzed. Ordered microtubule packing is absent in spindles up to 0.8 micron, but the total number of microtubules is sufficient to allow one microtubule per kinetochore with a few additional microtubules that may form an interpolar spindle. An obvious bundle of about eight interpolar microtubules was found in spindles 1.3-1.6 microns long, and we suggest that the approximately 32 remaining microtubules act as kinetochore fibers. The relative lengths of the microtubules in these spindles suggest that they may be in an early stage of anaphase, even though these spindles are all situated in the mother cell, not in the isthmus between mother and bud. None of the reconstructed spindles exhibited the uniform populations of kinetochore microtubules characteristic of metaphase. Long spindles (2.7-9.4 microns), presumably in anaphase B, contained short remnants of a few presumed kinetochore microtubules clustered near the poles and a few long microtubules extending from each pole toward the spindle midplane, where they interdigitated with their counterparts from the other pole. Interpretation of these reconstructed spindles offers some insights into the mechanisms of mitosis in this yeast.

Saccharomyces cerevisiae Mob1p is required for cytokinesis and mitotic exit.

The Saccharomyces cerevisiae mitotic exit network (MEN) is a conserved set of genes that mediate the transition from mitosis to G(1) by regulating mitotic cyclin degradation and the inactivation of cyclin-dependent kinase (CDK). Here, we demonstrate that, in addition to mitotic exit, S. cerevisiae MEN gene MOB1 is required for cytokinesis and cell separation. The cytokinesis defect was evident in mob1 mutants under conditions in which there was no mitotic-exit defect. Observation of live cells showed that yeast myosin II, Myo1p, was present in the contractile ring at the bud neck but that the ring failed to contract and disassemble. The cytokinesis defect persisted for several mitotic cycles, resulting in chains of cells with correctly segregated nuclei but with uncontracted actomyosin rings. The cytokinesis proteins Cdc3p (a septin), actin, and Iqg1p/ Cyk1p (an IQGAP-like protein) appeared to correctly localize in mob1 mutants, suggesting that MOB1 functions subsequent to actomyosin ring assembly. We also examined the subcellular distribution of Mob1p during the cell cycle and found that Mob1p first localized to the spindle pole bodies during mid-anaphase and then localized to a ring at the bud neck just before and during cytokinesis. Localization of Mob1p to the bud neck required CDC3, MEN genes CDC5, CDC14, CDC15, and DBF2, and spindle pole body gene NUD1 but was independent of MYO1. The localization of Mob1p to both spindle poles was abolished in cdc15 and nud1 mutants and was perturbed in cdc5 and cdc14 mutants. These results suggest that the MEN functions during the mitosis-to-G(1) transition to control cyclin-CDK inactivation and cytokinesis.

Mps1p regulates meiotic spindle pole body duplication in addition to having novel roles during sporulation.

Sporulation in yeast requires that a modified form of chromosome segregation be coupled to the development of a specialized cell type, a process akin to gametogenesis. Mps1p is a dual-specificity protein kinase essential for spindle pole body (SPB) duplication and required for the spindle assembly checkpoint in mitotically dividing cells. Four conditional mutant alleles of MPS1 disrupt sporulation, producing two distinct phenotypic classes. Class I alleles of mps1 prevent SPB duplication at the restrictive temperature without affecting premeiotic DNA synthesis and recombination. Class II MPS1 alleles progress through both meiotic divisions in 30-50% of the population, but the asci are incapable of forming mature spores. Although mutations in many other genes block spore wall formation, the cells produce viable haploid progeny, whereas mps1 class II spores are unable to germinate. We have used fluorescently marked chromosomes to demonstrate that mps1 mutant cells have a dramatically increased frequency of chromosome missegregation, suggesting that loss of viability is due to a defect in spindle function. Overall, our cytological data suggest that MPS1 is required for meiotic SPB duplication, chromosome segregation, and spore wall formation.

Nuclear pore complex number and distribution throughout the Saccharomyces cerevisiae cell cycle by three-dimensional reconstruction from electron micrographs of nuclear envelopes.

The number of nuclear pore complexes (NPCs) in individual nuclei of the yeast Saccharomyces cerevisiae was determined by computer-aided reconstruction of entire nuclei from electron micrographs of serially sectioned cells. Nuclei of 32 haploid cells at various points in the cell cycle were modeled and found to contain between 65 and 182 NPCs. Morphological markers, such as cell shape and nuclear shape, were used to determine the cell cycle stage of the cell being examined. NPC number was correlated with cell cycle stage to reveal that the number of NPCs increases steadily, beginning in G1-phase, suggesting that NPC assembly occurs continuously throughout the cell cycle. However, accumulation of nuclear envelope observed during the cell cycle, indicated by nuclear surface area, is not continuous at the same rate, such that the density of NPCs per unit area of nuclear envelope peaks in apparent S-phase cells. Analysis of the nuclear envelope reconstructions also revealed no preferred NPC-to-NPC distance. However, NPCs were found in large clusters over regions of the nuclear envelope. Interestingly, clusters of NPCs were most pronounced in early mitotic nuclei and were found to be associated with the spindle pole bodies, but the functional significance of this association is unknown.

Three-dimensional analysis and ultrastructural design of mitotic spindles from the cdc20 mutant of Saccharomyces cerevisiae.

The three-dimensional organization of mitotic microtubules in a mutant strain of Saccharomyces cerevisiae has been studied by computer-assisted serial reconstruction. At the nonpermissive temperature, cdc20 cells arrested with a spindle length of approximately 2.5 microns. These spindles contained a mean of 81 microtubules (range, 56-100) compared with 23 in wild-type spindles of comparable length. This increase in spindle microtubule number resulted in a total polymer length up to four times that of wild-type spindles. The spindle pole bodies in the cdc20 cells were approximately 2.3 times the size of wild-type, thereby accommodating the abnormally large number of spindle microtubules. The cdc20 spindles contained a large number of interpolar microtubules organized in a "core bundle." A neighbor density analysis of this bundle at the spindle midzone showed a preferred spacing of approximately 35 nm center-to-center between microtubules of opposite polarity. Although this is evidence of specific interaction between antiparallel microtubules, mutant spindles were less ordered than the spindle of wild-type cells. The number of noncore microtubules was significantly higher than that reported for wild-type, and these microtubules did not display a characteristic metaphase configuration. cdc20 spindles showed significantly more cross-bridges between spindle microtubules than were seen in the wild type. The cross-bridge density was highest between antiparallel microtubules. These data suggest that spindle microtubules are stabilized in cdc20 cells and that the CDC20 gene product may be involved in cell cycle processes that promote spindle microtubule disassembly.

Yeast Dam1p is required to maintain spindle integrity during mitosis and interacts with the Mps1p kinase.

We have identified a mutant allele of the DAM1 gene in a screen for mutations that are lethal in combination with the mps1-1 mutation. MPS1 encodes an essential protein kinase that is required for duplication of the spindle pole body and for the spindle assembly checkpoint. Mutations in six different genes were found to be lethal in combination with mps1-1, of which only DAM1 was novel. The remaining genes encode a checkpoint protein, Bub1p, and four chaperone proteins, Sti1p, Hsc82p, Cdc37p, and Ydj1p. DAM1 is an essential gene that encodes a protein recently described as a member of a microtubule binding complex. We report here that cells harboring the dam1-1 mutation fail to maintain spindle integrity during anaphase at the restrictive temperature. Consistent with this phenotype, DAM1 displays genetic interactions with STU1, CIN8, and KAR3, genes encoding proteins involved in spindle function. We have observed that a Dam1p-Myc fusion protein expressed at endogenous levels and localized by immunofluorescence microscopy, appears to be evenly distributed along short mitotic spindles but is found at the spindle poles at later times in mitosis.

Changes in thylakoid structure associated with the differentiation of heterocysts in the cyanobacterium, Anabaena cylindrica.

The thylakoids of vegetative cells of the filamentous cyanobacterium, Anabaena cylindrica, are capable of oxygen-evolving photosynthesis and contain both Photosystems I and II (PSI and PSII). The heterocysts, cells specialized for nitrogen fixation, do not produce oxygen and lack Photosystem II activity, the major accessory pigments, and perhaps the chlorophyll a associated with PSII. Freeze-fracture replicas of vegetative cells and of heterocysts reveal differences in the structure of the thylakoids. A histogram of particle sizes on the exoplasmic fracture face (E-face, EF) of vegetative cell thylakoids has two major peaks, at 75 and 100 A. The corresponding histogram for heterocyst thylakoids lacks the 100 A size class, but has a very large peak at about 55 A with a shoulder at 75 A. Histograms of protoplasmic fracture face (P-face, PF) particle diameters show single broad peaks, the mean diameter being 71 A for vegetative cells and 64 A for heterocysts. The thylakoids of both cell types have about 5600 particles/micrometers2 on the P-face. On the E-face, the density drops from 939 particles/micrometers2 on vegetative cell thylakoids to 715 particles/micrometers2 on heterocyst thylakoids. The data suggest that the 100 A E-face particle of vegetative cell thylakoids is a PSII complex. The 55 A EF particle of heterocysts may be part of the nitrogenase complex or a remnant of the PSII complex. The role of the 75 A EF particle is unknown. Other functions localized on cyanobacterial thylakoids, such as respiration and hydrogenase activity, must be considered when interpreting the structure of these complex thylakoids.

An enriched reaction center preparation from green photosynthetic bacteria.

Bacteriochlorophyll a reaction-center complex I from Chlorobium limicola f. thiosulfatophilum 6230 (Tassajara) was incubated in 2 M guanidine - HCl and then chromatographed on cross-linked dextran or agarose gel. Two principal components were separated: a larger component with photochemical activity (bacteriochlorophyll a reaction-center complex II) and a smaller component without activity (bacteriochlorophyll a protein). Complex II contains carotenoid, bacteriochlorophyll a, reaction center(s), and cytochromes b and c, but lacks the well characterized bacteriochlorophyll a protein contained in Complex I. Complex II carries out a light-induced reduction of cytochrome b along with an oxidation of cytochrome c.

Extragenic bypass suppressors of mutations in the essential gene BLD2 promote assembly of basal bodies with abnormal microtubules in Chlamydomonas reinhardtii.

bld2-1 mutant Chlamydomonas reinhardtii strains assemble basal bodies with singlet microtubules; bld2-1 cells display flagellar assembly defects as well as positioning defects of the mitotic spindle and cleavage furrow. To further understand the role of the BLD2 gene, we have isolated three new bld2 alleles and three partially dominant extragenic suppressors, rgn1-1, rgn1-2, and rgn1-3. bld2 rgn1-1 strains have phenotypes intermediate between those of bld2 and wild-type strains with respect to flagellar number, microtubule rootlet organization, cleavage furrow positioning, and basal body structural phenotypes. Instead of the triplet microtubules of wild-type cells, bld2 rgn1-1 basal bodies have mixtures of no, singlet, doublet, and triplet microtubules. The bld2-4 allele was made by insertional mutagenesis and identified in a noncomplementation screen in a diploid strain. The bld2-4 allele has a lethal phenotype based on mitotic segregation in diploid strains and in haploid strains generated by meiotic recombination. The lethal phenotype in haploid strains is suppressed by rgn1-1; these suppressed strains have similar phenotypes to other bld2 rgn1-1 double mutants. It is likely that BLD2 is an essential gene that is needed for basal body assembly and function.

Electron microscopy may reveal structure of docosahexaenoic acid-rich oil within Schizochytrium sp.

Schizochytrium sp. is an algae-like microorganism utilized for commercial production of docosahexaenoic acid (DHA)-rich oil and dried microalgae for use as a source of DHA in foods, feeds, and nutritional supplements. Electron microscopic analysis of whole cells of Schizochytrium sp. employing sample preparation by high-pressure freeze substitution suggests the presence of secondary and tertiary semicrystalline structures of triacylglycerols within the oil bodies in Schizochytrium sp. A fine secondary structure consisting of alternating light- and dark-staining bands was observed inside the oil bodies. Dark bands were 29 +/- 1 A in width, and light bands were 22 +/- 1 A in width. The tertiary (three-dimensional) structure may be a multilayered ribbon-like structure which appears coiled and interlaced within the oil body. In freeze-fracture photomicrographs, Schizochytrium oil bodies exhibited fracture planes with terraces averaging 52 +/- 7 A in height which could correspond to the combined width of two halves of two light bands and one dark band observed in the high-pressure freeze substitution photomicrographs. The results suggest that triacylglycerols within Schizochytrium sp. oil bodies may be organized in a triple chain-length structure. High-pressure freeze substitution electron micrographs of two other highly unsaturated oil-producing species of microalgae, Thraustochytrium sp. and Isochrysis galbana, also revealed this fine structure, whereas microalgae containing a higher proportion of saturated oil did not. The results suggest that the staining pattern is not an artifact of preparation and that the triple chain-length conformation of triacylglycerols in Schizochytrium sp. oil bodies may be caused by the unique fatty acid composition of the triacylglycerols.

Freeze-substitution protocols for improved visualization of membranes in high-pressure frozen samples.

Specimen preparation methods based on high-pressure freezing and freeze-substitution have enabled significant advances in the quality of morphological preservation of biological samples for electron microscopy. However, visualization of a subset of cellular membranes, particularly the endoplasmic reticulum and cis Golgi, is often impaired by a lack of contrast. By contrast, some efforts to increase membrane staining may lead to excessively granular staining. No one freeze-substitution method has emerged that both overcomes these limitations and is suitable for all types of analysis. However, one or more of the following protocols, perhaps with minor modifications, should yield satisfactory results in most cases. Freeze-substitution in glutaraldehyde and uranyl acetate in acetone, followed by embedding in Lowicryl HM20, generates samples suitable for both immunolocalization and high-resolution structural studies. Membranes are typically lightly stained but very well defined. Initial freeze-substitution in tannic acid and glutaraldehyde in acetone prior to exposure to osmium tetroxide significantly enhanced contrast on mammalian cellular membranes. Finally, initial trials indicate that freeze-substitution in potassium permanganate in acetone can provide strong contrast on endoplasmic reticulum and Golgi as well as other membranes. The tendency of permanganate to degrade cytoskeletal elements and other proteins when employed in aqueous solutions at room temperature is apparently curtailed when it is used as a freeze-substitution reagent.

Water stress provokes a generalized increase in phosphatidylcholine turnover in barley leaves.

Water and salt stress promote betaine accumulation in leaves of barley (Hordeum vulgare L.) by accelerating the de-novo synthesis of betaine, via choline. Previous radiotracer kinetic studies have implicated stress-enhanced turnover of the choline moiety of phosphatidylcholine (PC) as a major source of choline for betaine synthesis. Two approaches have therefore been followed to show whether stress-induced PC turnover is a cellor organelle-specific phenomenon, or a generalized one. In the first approach, [(3)H]ethanolamine of high specific activity was supplied to second leaves of unstressed and water-stressed barley plants; after 1 h, paired sections of tissue were excised from each leaf, one for extraction and analysis of [(3)H]metabolites and the other for autoradiography. The(3)H-activity remaining in the leaf tissue after washing out the water-soluble(3)H-metabolites during preparation for autoradiography was taken to be mainly in phospholipids. In unstressed leaves, [(3)H]phosphatidylethanolamine (PE) was the major labeled phospholipid, whereas there were approximately equal amounts of [(3)H]PE and [(3)H]PC in stressed leaves. At the light-microscope level, silver grains were associated with all living cells in both unstressed and stressed leaves; grains were concentrated in the cytoplasmic regions of highly vacuolate mesophyll cells, and were distributed throughout densely cytoplasmic vascular parenchyma. At the electron-microscope level, silver grains were not confined to any particular types of membranes in unstressed or stressed leaves. In the second approach, second leaves of stressed plants received a 1-h pulse of [(14)C]ethanolamine, and were then homogenized. The brei was subjected to sucrose density gradient centrifugation. The specific radioactivity of [(14)C]PC was quite similar in the gradient fractions, whether they contained microsomes or mitochondrial plus chloroplast membranes. We infer that stress does not enhance the turnover of any structurally discrete class of PC, but rather stimulates PC turnover in several or all classes of membranes in most cells of the leaf.