RESUMO
A dispersion-engineered multipass cell operating in the enhanced frequency regime is presented. Through the use of dispersive cavity mirrors, the nonlinear interaction is reshaped resulting in a smoother broadened spectrum, which yields a significant improvement in compressed pulse quality. The 70 W average power output of an Yb:fiber laser at 50 kHz repetition rate is compressed from 205 fs to 32 fs with more than 96% of the energy contained in the temporal main feature of the pulse. This first, to the best of our knowledge, experimental demonstration of a pulse quality improvement through enhanced frequency chirping in a multipass cell displays the opportunities for dispersion-tailored pulse compression.
RESUMO
A gas-filled multipass-cell-based post-compression of 515 nm wavelength second-harmonic pulses of an Yb:fiber laser from 240 fs to 15.7 fs is presented. The system delivers 0.44 mJ of pulse energy, 22.4 W of average power at 50.8 kHz with an overall efficiency of more than 40%. These results display the capabilities of multipass-cell-based post-compression schemes to move from the well-established near infrared spectral region to the undeveloped visible regime, allowing for high efficiencies in conjunction with energetic ultrashort pulses at high repetition rates. The unique combination of parameters in the green spectral range offers an immense potential for future developments of high photon flux higher-order harmonic sources.
RESUMO
We report on the efficient generation of broadband THz radiation based on a two-color gas-plasma scheme. Broadband THz pulses covering the whole THz spectral region, from 0.1-35 THz, are generated. This is enabled by a high-power, ultra-fast, thulium-doped, fiber chirped pulse amplification (Tm:FCPA) system and a subsequent nonlinear pulse compression stage that uses a gas-filled capillary. The driving source delivers 40 fs pulses at a central wavelength of 1.9 µm with 1.2 mJ pulse energy and 101 kHz repetition rate. Owing to the long driving wavelength and the use of a gas-jet in the THz generation focus, the highest reported conversion efficiency for high-power THz sources (>20 mW) of 0.32% has been achieved. The high efficiency and average power of 380 mW of the broadband THz radiation make this an ideal source for nonlinear, tabletop THz science.
Assuntos
Lasers , Radiação Terahertz , Frequência Cardíaca , Túlio , VeiasRESUMO
We report the nonlinear pulse compression of a high-power, thulium-doped fiber laser system using a gas-filled hollow-core fiber. The sub-two cycle source delivers 1.3 mJ pulse energy with 80 GW peak power at a central wavelength of 1.87 µm and an average power of 132 W. This is, so far, to the best of our knowledge, the highest average power of a few-cycle laser source reported in the short-wave infrared region. Given its unique combination of high pulse energy and high average power, this laser source is an excellent driver for nonlinear frequency conversion, toward terahertz, mid-infrared, and soft X-ray spectral regions.
RESUMO
In this work we measure the frequency dependent transfer function of the amplitude noise for both the seed and pump power in an Yb3+-doped fiber amplifier chain. In particular, the relative intensity noise transfer function of this amplifier chain in the frequency range of 10 Hz - 100 kHz has been investigated. It is shown that the pump power noise of the pre-amplifier stages is transformed into seed power noise for the next amplification stage. Crucially, the seed power noise in the frequency range of interest is strongly damped by the main-amplifier. This, however, does not happen for the pump power noise. Thus, the noise of the pump of the last amplifier stage is the factor with the strongest impact on the overall noise level of the system. Finally, useful guidelines to minimize the output amplitude noise of an Yb3+-doped fiber amplifier chain are given.