The planar anodic Al2O3-ZrO2 nanocomposite capacitor dielectrics for advanced passive device integration.

The need for integrated passive devices (IPDs) emerges from the increasing consumer demand for electronic product miniaturization. Metal-insulator-metal (MIM) capacitors are vital components of IPD systems. Developing new materials and technologies is essential for advancing capacitor characteristics and co-integrating with other electronic passives. Here we present an innovative electrochemical technology joined with the sputter-deposition of Al and Zr layers to synthesize novel planar nanocomposite metal-oxide dielectrics consisting of ZrO2 nanorods self-embedded into the nanoporous Al2O3 matrix such that its pores are entirely filled with zirconium oxide. The technology is utilized in MIM capacitors characterized by modern surface and interface analysis techniques and electrical measurements. In the 95-480 nm thickness range, the best-achieved MIM device characteristics are the one-layer capacitance density of 112 nF·cm-2, the loss tangent of 4·10-3 at frequencies up to 1 MHz, the leakage current density of 40 pA·cm-2, the breakdown field strength of up to 10 MV·cm-1, the energy density of 100 J·cm-3, the quadratic voltage coefficient of capacitance of 4 ppm·V-2, and the temperature coefficient of capacitance of 480 ppm·K-1 at 293-423 K at 1 MHz. The outstanding performance, stability, and tunable capacitors' characteristics allow for their application in low-pass filters, coupling/decoupling/bypass circuits, RC oscillators, energy-storage devices, ultrafast charge/discharge units, or high-precision analog-to-digital converters. The capacitor technology based on the non-porous planar anodic-oxide dielectrics complements the electrochemical conception of IPDs that combined, until now, the anodized aluminum interconnection, microresistors, and microinductors, all co-related in one system for use in portable electronic devices.

Effect of Mechanochemical Recrystallization on the Thermal Hysteresis of 1D FeII-triazole Spin Crossover Polymers.

The thermal hysteresis in the cooperative spin crossover (SCO) polymer [Fe(trz)(Htrz)2]n[BF4]n (1) has been tuned by a simple ball milling grinding process. Mechanical treatment affects the size and morphology of the crystallite domains, as confirmed by multiple complementary techniques, including ESEM, DLS, and PXRD data. Upon milling, the regular cubic shape particles recrystallize with slightly different unit cell parameters and preferential orientation. This macroscopic change significantly modifies the thermally induced SCO behavior, studied by temperature-dependent magnetic susceptibility, X-ray diffraction, and DSC analysis. Transition temperatures downshift, closer to room temperature, while hysteresis widens, when particle sizes are actually decreasing. We relate this counterintuitive observation to subtle modifications in the unit cell, offering new alternatives to tune and enhance SCO properties in this class of 1D-cooperative polymers.

Structural differences in enamel and dentin in human, bovine, porcine, and ovine teeth.

BACKGROUND: The aim was to study differences between crystalline nanostructures from the enamel and dentin of human, bovine, porcine, and ovine species. METHODS: Dentine and enamel fragments extracted from sound human, bovine, porcine and ovine incisors and molars were mechanically ground up to a final particle size of <100µm. Samples were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). RESULTS: Human enamel (HE) and dentin (HD) showed a-axis and c-axis lengths of the carbonate apatite (CAP) crystal lattice nearer to synthetic hydroxyapatite (SHA), which had the smallest size. Enamel crystal sizes were always higher than those of dentin for all species. HE and HD had the largest crystal, followed by bovine samples. Hydroxyapatites (HAs) in enamel had a higher crystallinity index (CI), CIRietveld and CIFTIR, than the corresponding dentin of the same species. HE and HD had the highest CIs, followed by ovine enamel (OE). The changes in heat capacity that were nearest to values in human teeth during the glass transition (ΔCp) were in porcine specimens. There was a significant direct correlation between the size of the a-axis and the substitution by both type A and B carbonates. The size of the nanocrystals and the crystallinity (CIRietveld y CIFTIR) were significantly and negatively correlated with the proteic phase of all the substrates. There was a strongly positive correlation between the caloric capacity, the CIs and the crystal size and a strongly negative correlation between carbonates type A and B and proteins. CONCLUSIONS: There are differences in the organic and inorganic content of human, bovine, porcine and ovine enamels and dentins which should be taken into account when interpreting the results of studies using animal substrates as substitutes for human material.

Understanding the Limiting Factors of Solvent-Annealed Small-Molecule Bulk-Heterojunction Organic Solar Cells from a Chemical Perspective.

A detailed account of the limiting factors of solvent-annealed bulk-heterojunction small-molecule organic solar cells is given. This account is based on the extensive characterisation of solar cell devices made from a library of five diketopyrolopyrole (DPP) donor dyes. Their chemical structure is designed in such a way as to provide insights into the energetics of solar cell active layer micro-structure formation. Numerous chemical and physical properties of the active layers are assessed and inter-related such as light absorption, molecular packing in the solid state, crystal-forming properties in thin films, charge carrier mobility and charge carrier recombination kinetics. A myriad of characterisation techniques are used such as UV/Vis absorption spectroscopy, photoluminescence spectroscopy, XRD, AFM and photo-induced transient measurements, which provide information on the optical properties of the active layers, morphology and recombination kinetics. Consequently, a mechanism for the solvent-vapour-annealing-assisted formation of crystalline domains of donor molecules in the active layer is proposed, and the micro-structural features are related to the J-V characteristics of the devices. According to this model, the crystalline phase in which the donor crystallise in the active layer is the key determinant to direct the formation of the micro-structure.

Small molecule BHJ solar cells based on DPP(TBFu)2 and diphenylmethanofullerenes (DPM): linking morphology, transport, recombination and crystallinity.

The effect of alkyl chains in substituted diphenylmethano[70]fullerenes (C70-DPM) on the device characteristics of DPP(TBFu)2 small molecule-based bulk heterojunction (BHJ) organic solar cell devices is investigated. By measuring charge carrier mobilities as well as the morphology and crystallinity of each device we have been able to understand and explain the differences found between solar cells made with the different C70-DPM fullerenes despite the general lack of simple relationships between the molecular structure, orbital level positioning and power conversion efficiency. Our study then concludes with some general rules for the future design of acceptors for DPP(TBFu)2 containing photoactive layers in the search for efficient organic solar cells.