The Dual-Stereocontrol Mechanism: Heteroselective Polymerization of rac-Lactide and Syndioselective Polymerization of meso-Lactide by Chiral Aluminum Salan Catalysts.

We describe alkoxo-aluminum catalysts of chiral bipyrrolidine-based salan ligands that follow the dual-stereocontrol mechanism wherein a given combination of stereogeneities at the metal site and the proximal center of the last inserted lactidyl ("match") is active towards lactide having a proximal stereogenic center of the opposite configuration, while the diastereomeric combination of stereogeneities ("mismatch") is inactive towards any lactide. Polymerization of rac-LA by the enantiomerically pure catalysts was sluggish and gave stereoirregular poly(lactic acid) (PLA) because selective insertion to a match diastereomer gives a mismatch diastereomer. The racemic catalysts showed higher activity and led to highly heterotactic PLA following polymeryl exchange between two mismatched catalyst enantiomers. A succession of match diastereomers in selective meso-LA insertions led to syndiotactic PLAs reaching a syndiotacticity degree of α=0.96. This polymer featured a Tm of 153 °C matching the highest reported value, and the highest crystallinity (ΔHm =56 J g-1 ) ever reported for syndiotactic PLA.

Influence of Anionic Ligand Exchange in Latent Sulfur-Chelated Ruthenium Precatalysts.

Four new cis-dianionic S-chelated ruthenium benzylidenes were synthesized by chloride ligand exchange. The special cis-dianionic conformation of these complexes contributed to a particularly facile anion exchange process, producing room-temperature-latent precatalysts. Their catalytic activity was strongly influenced by the solvent used. The latent iodide complex very efficiently promoted ring-closing metathesis by heating in toluene. Conversely, carboxylate ligands produced quite poor catalysts, but could abstract chlorides from chlorinated solvents to transform into active precatalysts. In tetrahydrofuran (THF), the S-chelated dichloro complex was shown to promote cycloisomerization instead of metathesis; however, the metathesis activity in THF could be recovered in the presence of phenylacetylene as a cocatalyst. Under the same conditions, all the other complexes required addition of LiCl to mimic this dichotomous behavior.

Block-Stereoblock Copolymers of Poly(ϵ-Caprolactone) and Poly(Lactic Acid).

A magnesium complex of the type {ONNN}Mg-HMDS wherein {ONNN} is a sequential tetradentate monoanionic ligand is introduced. In the presence of an alcohol initiator this complex catalyzes the living and immortal homopolymerization of the lactide enantiomers and ϵ-caprolactone at room-temperature with exceptionally high activities, as well as the precise block copolymerization of these monomers in a one-pot synthesis by sequential monomer addition. Copolymers of unprecedented microstructures such as the PCL-b-PLLA-b-PDLA and PDLA-b-PLLA-b-PCL-b-PLLA-b-PDLA block-stereoblock microstructures that feature unique thermal properties are readily accessed.

Group†4 Metal Complexes of Phenylene-Salalen Ligands in rac-Lactide Polymerization Giving High Molecular Weight Stereoblock Poly(lactic acid).

Phenylene-salalens-sequential tetradentate dianionic {ONNO}-type ligands that include an ortho-phenylene group bridging between an imine and amine internal donors bound to phenol arms with a broad variety of substitution patterns are described. Zirconium and hafnium complexes of the type [{ONNO}M(O-tBu)2 ] were formed as single diastereomers, which, according to crystallographic structures, featured the fac(around the amine)-mer(around the imine) wrapping mode. The reactivity and stereoselectivity in rac-lactide (rac-LA) polymerizations were found to depend on the substitution pattern: complexes featuring small groups on the imine-side phenol and bulky groups on the amine-side phenol exhibited the favorable combination of high activity and high isoselectivity (Pm ≤0.91). Isotactic stereoblock copolymers of high molecular weights were prepared. The polymers crystallized in the stereocomplex phase according to thermal (differential scanning calorimetry) and crystallographic analysis.

Tailor-Made Stereoblock Copolymers of Poly(lactic acid) by a Truly Living Polymerization Catalyst.

Poly(lactic acid) (PLA) is a biodegradable polymer prepared by the catalyzed ring opening polymerization of lactide. An ideal catalyst should enable a sequential polymerization of the lactide enantiomers to afford stereoblock copolymers with predetermined number and lengths of blocks. We describe a magnesium based catalyst that combines very high activity with a true-living nature, which gives access to PLA materials of unprecedented microstructures. Full consumption of thousands of equivalents of L-LA within minutes gave PLLA of expected molecular weights and narrow molecular weight distributions. Precise PLLA-b-PDLA diblock copolymers having block lengths of up to 500 repeat units were readily prepared within 30 min, and their thermal characterization revealed a stereocomplex phase only with very high melting transitions and melting enthalpies. The one pot sequential polymerization was extended up to precise hexablocks having "dialed-in" block lengths.

Assembling Quasi-enantiomeric Octahedral Complexes of Different Metals via Quasi-racemate Crystallization.

Aiming at a general methodology for binary co-assembly of complexes of different metals through quasiracemate crystallization, the hexadentate ligand 1 comprised of the chiral bipyrrolidine core and two bipyridine peripheral arms is introduced. Ligand 1 was found to bind in a fully diastereoselective and uniform mode around Zn(II), Fe(II) and Cd(II) giving coordinatively inert octahedral "chiral-at-metal" complexes with the Δ4Λ2/Λ4 Δ2 wrapping mode. Equimolar mixtures of quasienantiomeric pairs of these complexes exhibited a clear tendency to pack as quasiracemates as was revealed from the crystallographic structures of [(R,R)-1-Zn](PF6)2/[(S,S)-1-Fe](PF6)2 and [(R,R)-1-Zn](PF6)2/[(S,S)-1-Cd](PF6)2, in an isomorphous fashion to that of the racemic compound [rac-1-Zn](PF6)2 in space group C2/c.

Zinc Complexes of Sequential Tetradentate Monoanionic Ligands in the Isoselective Polymerization of rac-Lactide.

Zinc complexes of {ONNN}-type sequential tetradentate monoanionic ligands reacted with diethylzinc to give the mononuclear ethylzinc complexes. The benzyloxy complexes were formed readily and were found to be highly active as well as living/immortal catalysts for ring-opening polymerization of rac-lactic acid with a clear isospecific inclination. Chiral gas chromatography analysis revealed a mild preference for a given lactide enantiomer by the chiral catalysts.

Intriguing Physical and Chemical Properties of Phosphorus Corroles.

The fluorescence intensity of phosphorus corroles increases upon meso-aryl C-F/C-H and P-OH/P-F substitutions, the latter affects corrole-centered redox processes more than C-H/C-F substitution on the corrole's skeleton, and the presence of F atoms allows for the first experimental insight into the electronic structures of oxidized corroles. Experimental and theoretical methodologies reveal that mono- but not bis-chlorosulfonation of the corrole skeleton is under kinetic control. Selective introduction of heavy atoms leads to complexes that are phosphorescent at room temperature.

A Light-Activated Olefin Metathesis Catalyst Equipped with a Chromatic Orthogonal Self-Destruct Function.

A sulfur-chelated photolatent ruthenium olefin metathesis catalyst has been equipped with supersilyl protecting groups on the N-heterocyclic carbene ligand. The silyl groups function as an irreversible chromatic kill switch, thus decomposing the catalyst when it is irradiated with 254 nm UV light. Therefore, different types of olefin metathesis reactions may be started by irradiation with 350 nm UV light and prevented by irradiation with shorter wavelengths. The possibility to induce and impede catalysis just by using light of different frequencies opens the pathway for stereolithographic applications and novel light-guided chemical sequences.

Straightforward synthesis and catalytic applications of rigid N,O-type calixarene ligands.

Here, we report a simple one-step access to new rigid N,O-calixarene ligands which is based on copper-catalyzed amination at the lower rim. We also present the coordination properties of these ligands with some main group and transition metals leading to new complexes with superior catalytic activity, in several organic transformations, compared with calixarene metal complexes reported in the literature.

Mechanistic Insight into the Stereochemical Control of Lactide Polymerization by Salan-Aluminum Catalysts.

Alkyl aluminum complexes of chiral salan ligands assembled around the 2,2'-bipyrrolidine core form as single diastereomers that have identical configurations of the N donors. Active catalysts for the polymerization of lactide were formed upon the addition of benzyl alcohol. Polymeryl exchange between enantiomorphous aluminum species had a dramatic effect on the tacticity of the poly(lactic acid) (PLA) in the polymerization of racemic lactide (rac-LA): The enantiomerically pure catalyst of the nonsubstituted salan ligand led to isotactic PLA, and the racemic catalyst exhibited lower stereocontrol. The enantiomerically pure catalyst of the chloro-substituted salan ligand led to PLA with a slight tendency toward heterotacticity, whereas the racemic catalyst led to PLA of almost perfect heterotacticity following an insertion/auto-inhibition/exchange mechanism.

Selective aryl-fluoride reductive elimination from a platinum(IV) complex.

A difluoro(mesityl)platinum(IV) complex underwent highly selective reductive elimination of 2-fluoromesitylene upon heating in toluene. Kinetic analysis and DFT calculations suggest that the CF coupling involves a five-coordinate Pt(IV) transient intermediate resulting from the rate-limiting dissociation of the pyridine ligand.

Gradient isotactic multiblock polylactides from aluminum complexes of chiral salalen ligands.

Aluminum complexes of enantiomerically pure aminomethylpyrrolidine-based salalen ligands and their application in the stereoselective polymerization of lactide are described. Poly(lactic acid) featuring the new gradient isotactic multiblock microstructure was synthesized by isoselective catalysts, which operate by a combination of enantiomorphic-site and chain-end control mechanisms.

N-methyl-trimethylacetamide in thin films displays infrared spectra of π-helices, with visible static and dynamic growth phases, and then a ß-sheet.

The simplest (minimal) peptide model is HCONHCH3. An increase in the π-helix content with increased substitution in the acyl portion suggested the examination of N-methyl-trimethylacetamide) (NMT). NMT displays spectra, in which there is evolution of a set of helices defined by their amide I maxima near 1686 (3(10)), 1655 (first π), and, most importantly, at 1637 cm(-1) (π). Expanded thin-film infrared spectroscopy (XTFIS) shows pauses or slow stages, which are identified as static phases followed by dynamic phases with the incremental gain or loss of a helix turn. In addition, absorbance at 1637 cm(-1) suddenly increases at 82.1 s (30% over 0.3 s), indicating a phase change and crystallization of the π-helix, along with a coincidental decrease in the absorbance for the first π-helix. A sharp peak occurs at the maximum of the phase change at 82.5 s, representing a pure NMT π-helix. The spectra then undergo a decreasing general absorption loss over 150 s, with the π-helix evolving further to an antiparallel ß-sheet fragment. The spectral quality arises from the immobilization of polar molecules on polar surfaces. The crystal structure is that of an antiparallel ß-sheet.

Tuning the photophysical and redox properties of metallocorroles by iodination.

Facile procedures were developed for selective iodination of aluminum and gallium corroles; crystallographic characterization shows that the main structural aspects are not changed (the macrocycle remains planar). Absorption maxima are red-shifted by 3-5 nm/iodine, singlet lifetimes are reduced to <80 ps, and emissions from long-lived excited states come into effect. The iodinated corroles display prompt fluorescence, phosphorescence, and delayed thermal fluorescence, all at room temperature. The effect on redox potentials appears to be additive for each additional iodine and, surprisingly, is practically identical to that of the other three halides. The conclusions of this work are of large importance for the design of metallocorroles that are best suited for the various applications where metallocorroles are used as catalysts and photosensitizers.

Room temperature rapid functionalization of E-H bonds (E = O, N, S) via the metal-ligand cooperation mechanism.

An arylpalladium PNF-type pincer complex reacts with water and anilines under very mild conditions, providing access to new PNO- and PNN-pincer complexes with concomitant hydrogen transfer to the ligand core. Such a metal-ligand cooperation mode allows for the irreversible double activation of even highly sterically hindered aniline molecules. With thiols, the activation mode depends on the nature of the substituent at the sulfur atom, with thiophenols giving products of C-S elimination.

Pitfalls in bromination reactions of zinc porphyrins: two-sided ring opening of the porphyrin macrocycle.

Reaction of [Zn(II)(TTP)] (1) (TTP = dianion of 5,10,15,20-meso-tetrakis(p-tolyl)porphyrin) with 16 equiv of N-bromosuccinamide (NBS) in methanol at reflux led to the unexpected two-sidedd open-ring brominated product [Zn(II)(C26H20N2O2Br5)2] (2). Similar observations have been made with other meso-substituted zinc porphyrins as well [Zn(II)(por)] {por = dianion of 5,10,15,20-meso-tetrakis(aryl)porphyrin; aryl = phenyl (TPP), p-(t)Bu-phenyl (TBPP), m-Cl-phenyl (TClPP)}. The respective products [Zn(II)(C24H16N2O2Br5)2] (3), [Zn(II)(C32H32N2O2Br5)2] (4), and [Zn(II)(C24H14N2O2Cl2Br5)2] (5) have been isolated in good to moderate yields and characterized by elemental analysis and UV-vis, (1)H NMR, and mass spectrometry. Additional bromination reaction of 1 with 8 equiv of NBS in a chloroform/methanol mixture led (after the two-sided ring opening) to nonmetalated brominated bi(pyrrole) product, C36H34N2O4Br4 (6). The detailed structures of complexes 1, 2, 3, and 6, available in a single crystal form, have been confirmed by X-ray diffraction analysis.

Zirconium complexes of phenylene-bridged {ONSO} ligands: coordination chemistry and stereoselective polymerization of rac-lactide.

Sequential tetradentate dianionic thio-imine diphenolate ligands featuring an ortho-phenylene core and their zirconium complexes are described for the first time. Ligands that include different combinations of bulky-alkyl groups and halo groups on the two phenol arms were prepared by a substitution/condensation reaction sequence. An unexpected fac-fac wrapping mode was found in the solid state for the ligands in the octahedral [{ONSO}Zr(O(t)Bu)2] complexes. The complexes were all fluxional, and the barrier for enantiomer interconversion was found to depend on the phenolate substituents. The complexes were found to catalyze the polymerization of rac-lactide to poly(lactic acid) in solution with polymer tacticities varying from heterotactic to atactic which showed correlation to the nature of phenolate substituents but not to the degree of complex fluxionality.

Evidence for metal-ligand cooperation in a Pd-PNF pincer-catalyzed cross-coupling.

The first Pd-pincer complex bearing a halogen (fluorine) arm has been prepared via the base-assisted dearomatization of a phosphine-quinoline (P~N) ligand. This dearomatization is reversible and has been used to facilitate catalytic Sonogashira-type cross-coupling that, contrary to the typical mechanistic approach, is based on a metal-ligand cooperation mode.

Exploring supramolecular self-assembly of tetraarylporphyrins by halogen bonding: crystal engineering with diversely functionalized six-coordinate tin(L)2-porphyrin tectons.

This study targets the construction of porphyrin assemblies directed by halogen bonds, by utilizing a series of purposely synthesized Sn(axial ligand)2-(5,10,15,20-tetraarylporphyrin) [Sn(L)2-TArP] complexes as building units. The porphyrin moiety and the axial ligands in these compounds contain different combinations of complimentary molecular recognition functions. The former bears p-iodophenyl, p-bromophenyl, 4'-pyridyl, or 3'-pyridyl substituents at the meso positions of the porphyrin ring. The latter comprises either a carboxylate or hydroxy anchor for attachment to the porphyrin-inserted tin ion and a pyridyl-, benzotriazole-, or halophenyl-type aromatic residue as the potential binding site. The various complexes were structurally analyzed by single-crystal X-ray diffraction, accompanied by computational modeling evaluations. Halogen-bonding interactions between the lateral aryl substituents of one unit of the porphyrin complex and the axial ligands of neighboring moieties was successfully expressed in several of the resulting samples. Their occurrence is affected by structural (for example, specific geometry of the six-coordinate complexes) and electronic effects (for example, charge densities and electrostatic potentials). The shortest intermolecular I⋅⋅⋅N halogen-bonding distance of 2.991 Šwas observed between iodophenyl (porphyrin) and benzotriazole (axial ligand) moieties. Manifestation of halogen bonds in these relatively bulky compounds without further activation of the halophenyl donor groups by electron-withdrawing substituents is particularly remarkable.