RESUMO
For the first time, clemastine was estimated in this work utilizing two validated resonance Rayleigh scattering (RRS) and fluorimetric methods. The methods relied on forming an association complex in an acidic medium between eosin Y reagent and clemastine. In the spectrofluorimetric approach, the investigated drug was quantified by quenching the fluorescence-emission intensity of eosin Y at 543.5 nm. The RRS method relied on enhancing the RRS spectrum at 331.8 nm, which is produced when eosin Y interacts with clemastine. Suitable conditions were established for the reaction to achieve maximum sensitivity. The linear values obtained from the spectrofluorimetric approach and the RRS method fall into the ranges of 0.2-1.5 µg mL- 1 and 0.25-2.0 µg mL- 1, respectively. It was established that the detection limits for these methods were 0.045 µg mL- 1 and 0.059 µg mL- 1, respectively. The developed methodologies yielded acceptable recoveries when used to estimate the quantity of clemastine in its pharmaceutical tablet dosage form. Regarding the use of greener solvents that were chosen, the suggested and reported methods were compared with the help of the Green Solvents Selecting (GSST) tool for assessing hazardous solvents to achieve sustainability. Furthermore, analytical Eco scale and comprehensive assessments of whiteness, blueness, and greenness were carried out utilizing Modified NEMI, ComplexGAPI, and AGREE evaluation tools. Additionally, recently developed tools such as BAGI and RGB 12 were applied to assess the blueness and the whiteness of the suggested methods.
RESUMO
In this work, two validated approaches were used for estimating hydroxyzine HCl for the first time using resonance Rayleigh scattering (RRS) and spectrofluorimetric techniques. The suggested approaches relied on forming an association complex between hydroxyzine HCl and 2,4,5,7-tetraiodofluorescein (erythrosin B) reagent in an acidic media. The quenching in the fluorescence intensity of 2,4,5,7-tetraiodofluorescein by hydroxyzine at 551.5 nm (excitation = 527.5 nm) was used for determining the studied drug by the spectrofluorimetric technique. The RRS approach is based on amplifying the RRS spectrum at 348 nm upon the interaction of hydroxyzine HCl with 2,4,5,7-tetraiodofluorescein. The spectrofluorimetric methodology and the RRS methodology produced linear results within ranges of 0.15-1.5 µg ml-1 and 0.1-1.2 µg ml-1, respectively. LOD values for these methods were determined to be 0.047 µg ml-1 and 0.033 µg ml-1, respectively. The content of hydroxyzine HCl in its pharmaceutical tablet was estimated using the developed procedures with acceptable recoveries. Additionally, the application of four greenness and whiteness algorithms shows that they are superior to the previously reported method in terms of sustainability, economics, analytical performance, and practicality.
Assuntos
Algoritmos , Hidroxizina , Espectrometria de Fluorescência , Hidroxizina/análise , Hidroxizina/química , Antagonistas dos Receptores Histamínicos/análise , Antagonistas dos Receptores Histamínicos/química , Espalhamento de Radiação , Eritrosina/química , Eritrosina/análiseRESUMO
In this study, gold-reduced graphene oxide (Au@rGO) nanocomposite has been synthesized by repurposing electronic waste and dry batteries. This innovative approach involved utilizing the graphite rod from dry batteries to produce reduced graphene oxide (rGO), which was subsequently modified through the incorporation of gold nanoparticles obtained from recycled electronic waste. This methodology marks a significant breakthrough in electronic waste recycling, presenting a cost-effective and sustainable means of creating novel nanocomposites for applications in photocatalysis and adsorption, particularly in the removal of crystal violet (CV) from aqueous media. The synthesized Au@rGO nanocomposite was characterized using X-ray diffraction, scanning electron microscopy, energy dispersed X-ray, and N2 adsorption/desorption. Parameters that affect the adsorption and photocatalytic degradation of CV dye have been studied in detail. The optimal conditions for CV adsorption and photocatalytic degradation were pH of 10, equilibrium time of 30 min, CV concentration of 10 mg/L and adsorbent dosage of 40 mg. Furthermore, the isotherm and kinetics of CV removal were also studied. The removal of CV dye using adsorption and photocatalytic degradation techniques reached 95% and 99%, respectively. Consequently, the results showed that photocatalytic degradation of CV dye onto the mesoporous Au@rGO nanocomposite is more proper way than the adsorption technique for removing the CV dye from aqueous media. The designed photocatalyst has high efficiency and it can be reused and activated several times so it can be used in real water treatment applications.
RESUMO
The adsorption property of the costless green cellulose acetate (CA) was boosted by the dual modifications: inner modification by incorporating carboxylated graphene oxide (COOH-GO) into the CA spheres and outer modification by the surface modification of the COOH-GO@CA spheres by iminodiacetic acid (IDA) for removing Pb(II). The adsorption experiments of the Pb(II) proceeded in a batch mode to evaluate the adsorption property of the COOH-GO@CA@IDA spheres. The maximal Pb(II) adsorption capacity attained 613.30 mg/g within 90 min at pH = 5. The removal of Pb(II) reached its equilibrium within 20 min, and the removal % was almost 100% after 30 min at the low Pb(II) concentration. The Pb(II) adsorption mechanism was proposed according to the kinetics and isotherms studies; in addition, the zeta potential (ZP) measurements and X-ray Photoelectron Spectroscopy (XPS) analysis defined the adsorption pathways. By comparing the XPS spectra of the authentic and used COOH-GO@CA@IDA, it was deduced that the contributed chemical adsorption pathways are Lewis acid-base, precipitation, and complexation. The zeta potential (ZP) measurements demonstrated the electrostatic interaction participation in adsorbing the cationic Pb(II) species onto the negatively charged spheres (ZP = 14.2 mV at pH = 5). The unique channel-like pores of the COOH-GO@CA@IDA spheres suggested the pore-filling mechanism of Pb(II). The promising adsorption results and the superb recyclability character of COOH-GO@CA@IDA enable it to extend of the bench scale to the industrial scale.
Assuntos
Celulose , Grafite , Iminoácidos , Chumbo , Grafite/química , Chumbo/química , Adsorção , Celulose/química , Celulose/análogos & derivados , Iminoácidos/química , Porosidade , CinéticaRESUMO
Recycling gold from electronic waste offers significant benefits for both environmental protection and resource sustainability. However, this process presents considerable challenges due to high costs, prolonged processing times, and interference from coexisting metals. In this study, we synthesized a hybrid mesoporous nanocomposite comprising platelets-like CoNi2S4 incorporated with g-C3N4 nanosheets (CoNi2S4@g-C3N4) for the selective recovery of gold (Au(iii)) ions from spent computer motherboards. Comprehensive characterization of the CoNi2S4@g-C3N4 nanocomposite was conducted, including its physicochemical properties, textural and structural characteristics, morphology, and elemental composition. The CoNi2S4@g-C3N4 extractor demonstrated an exceptional adsorption capacity of 200.6 mg g-1, with high selectivity at pH 2, rapid equilibrium time of 60 minutes, and satisfactory reusability for over ten cycles. Adsorption isotherm and kinetic studies revealed that the CoNi2S4@g-C3N4 nanocomposite adheres to the Langmuir adsorption model and the pseudo-second-order kinetic model for Au(iii) ion adsorption. Overall, this study introduces a viable adsorbent that shows considerable promise for industrial-scale Au(iii) extraction from e-waste.
RESUMO
Owing to the high cost of precious metal catalysts for the oxygen evolution reaction (OER), the production of highly efficient and affordable electrocatalysts is important for generating pollution-free and renewable energy via electrochemical processes. A facile hydrothermal approach was employed to synthesize hybrid mesoporous iron-nickel bimetallic sulfides @ P, N-doped carbon for the OER. The prepared Fe0.5NiS2@C exhibited an overpotential (η) of 250 mV at 10 mA/cm2. This exceeded the overpotentials recently reported for surface-modified P, N-doped carbon-based catalysts for the OER in a 1 M KOH medium. Moreover, the Fe0.5NiS2@C catalyst showed a notable Tafel slope of 90.5 mV/dec with long-dated stability even after 24 h at 10 mA/cm2. The superior OER performance of the Fe0.5NiS2@C catalysts may be due to their large surface area, sheet-like morphology with abundant active sites, fast transfer of mass and electrons, control of the electronic structure by co-treatment with heteroatoms (e.g., P and N), and the synergistic effect of bimetallic sulfides, making them favorable catalysts for the oxygen evolution reaction. Density functional theory (DFT) calculations showed that the Fe0.5NiS2@C catalyst exhibited strong H2O-adsorption energy. The enhanced OER activity of Fe0.5NiS2@C was attributed to its higher surface area, favorable H2O adsorption energy, improved electron transfer efficiency, and lower Gibbs free energy compared to those of the other proposed catalysts.