Negatively charged chitosan nanoparticles prepared by ionotropic gelation for encapsulation of positively charged proteins.

The nanoprecipitation of hydrogel nanoparticles by complex coacervation is investigated through a systematic study of the popular chitosan-polyphosphate pair of polyelectrolytes with opposite charges at pH 4. Polyphosphates of varying molar masses and electrical charges are investigated as alternatives to the commonly used tripolyphosphate, so as to assess the influence of the strength of electrostatic interactions on the fabrication possibility, the size of hydrogel particles, and their overall charge. Sodium hexametaphosphate and sodium polyphosphate allow the manufacture of such nanoparticles with either a positive or a negative charge, depending on the chitosan/polyphosphate ratio and the order of mixing. The classical way of mixing by pouring the polyphosphate solution into the chitosan solution yields microparticles. Inverting the order of mixing by pouring the chitosan solution into the polyphosphate solution allows the precipitation of negatively charged nanoparticles with diameters in the range 100-200 nm. Such charge inversion of the chitosan into negative is not possible with the common TPP. It was achieved using sodium hexametaphosphate and sodium polyphosphate having a larger negative charge. Charge inversion of chitosan allows an efficient encapsulation of positively charged proteins with an improved encapsulation efficiency than in the usual TPP-based coacervate. The encapsulation of the bovine serum albumin at pH 4 is given as a case study of a positively charged protein.

Morphological study of electrospun chitosan/poly(vinyl alcohol)/glycerol nanofibres for skin care applications.

This study aimed to evaluate the influence of formulation and procedure parameters in obtaining thick and continuous chitosan/PVA/glycerol nanofibres to be applied in skin care. For that, the polymers were characterized by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and size-exclusion chromatography. After this, 96 chitosan/PVA/glycerol nanofibre scaffolds were prepared by electrospinning method, using factorial designs. The independent variables were crude and pure chitosan, 2 brands of PVA, 2 needle gauges, high and low polymer concentration, high and low glycerol concentration, and final solution with and without ultrafiltration. Morphological analysis was performed by scanning electron microscopy, atomic force microscopy, and confocal microscopy. The best sample (NF67) presented an average thickness of 268.3 nm, uniform distribution, and high yield. It was obtained at a 1:3.5 (crude chitosan: PVA with lower molecular weight, but more hydrolysed) ratio and lower glycerol concentration, suggesting that the degree of hydrolysis of the PVA is more important than its molecular weight for obtaining better quality nanofibres and that the glycerol also makes the electrospinning process difficult. Thus, it was possible to choose parameters that provide scaffolds that could be applied as a matrix extracellular-like material in wound healing.

Development and Evaluation of an Anti-aging Cosmetic Formulation Exploring Antioxidant Potential of Vitis vinifera L.

An important skin aging mechanism is oxidative stress. Reactive oxygen species in excess leads to skin integrity loss and visible changes. Antioxidants are able to prevent reactive oxygen species damage, making their supplementation important to slow down the aging process. We evaluated Vitis vinifera L. extract antioxidant potential to be applied for cosmetic purpose. The sample's thin-layer chromatography profile and antioxidant results indicated a good antioxidant activity. The extract was incorporated into different formulations, and a stability study was conducted with the emulsion chosen. Organoleptic and physicochemical parameters were evaluated, as well as the microbial count. The formulation was found to be in compliance with current standards and has the potential to be further studied and used as an anti-aging cosmetic.

Calendula officinalis L. flower extract-mediated green synthesis of silver nanoparticles under LED light

Abstract Silver nanoparticles (AgNPs) are among the most known nanomaterials being used for several purposes, including medical applications. In this study, Calendula officinalis L. flower extract and silver nitrate were used for green synthesis of silver nanoparticles under red, green and blue light-emitting diodes. AgNPs were characterized by Ultraviolet-Visible Spectrophotometry, Field Emission Scanning Electron Microscopy, Dynamic Light Scattering, Electrophoretic Mobility, Fourier Transform Infrared Spectroscopy and X-ray Diffraction. Isotropic and anisotropic silver nanoparticles were obtained, presenting hydrodinamic diameters ranging 90 - 180 nm, polydispersity (PdI > 0.2) and moderate stability (zeta potential values around - 20 mV)

The Relationship Between Body Image and Domains of Sexual Functioning Among Heterosexual, Emerging Adult Women.

INTRODUCTION: Research suggests that body image affects sexual functioning, but the relationship between specific types of body image (evaluative, affective, and behavioral) and domains of sexual functioning (desire, arousal, and orgasm) has not been investigated. AIM: To determine whether, and to what degree, body image concerns (evaluative, affective, and behavioral) influence aspects of women's sexual functioning (desire, arousal, and orgasm). METHODS: Eighty-eight sexually active women in heterosexual romantic relationships completed surveys assessing evaluative, affective, and behavioral body image and sexual functioning. Body composition data also were collected using dual energy x-ray absorptiometry. MAIN OUTCOME MEASURES: Sexual functioning was assessed using the desire, arousal, and orgasm subscales of the Female Sexual Functioning Index. RESULTS: Hierarchical multiple regression analysis indicated that poor evaluative, affective, and behavioral body image were detrimental to women's sexual functioning. Specifically, dissatisfaction with one's body predicted decrements in desire (ß = -0.31, P < .05) and arousal (ß = -0.35, P < .01). Similarly, feeling that others evaluate one's body negatively predicted decrements in desire (ß = 0.22, P < .05) and arousal (ß = 0.35, P < .01). Feeling negatively about one's appearance predicted decrements in arousal (ß = 0.26, P < .05). Negative thoughts and feelings about one's body during a sexual encounter (body image self-consciousness) predicted decrements in arousal (ß = -0.37, P < .01) and orgasm (ß = -0.25, P < .05). CONCLUSION: Findings from this study suggest important linkages between body image and sexual functioning constructs and indicates that interventions to improve body image could have concomitant benefits related to sexual experience.

Stability and Sensory Evaluation of an Innovative Antiaging Formulation Based on Marine Ingredients

Abstract The high consumption of antiaging cosmetics represents an outstanding opportunity for the development of new processes and attractive products in the cosmetic industry. Stability studies and sensory analyses are critical steps in the development process and production chain. Here we present a potential antiaging cosmetic product with innovative sensory characteristics. Caviar extract antioxidant properties were firstly evaluated by the DPPH method since it is an important mechanism against skin aging. Ca-alginate beads containing 2% of caviar extract and 0.2% of black pigment were prepared to obtain spheres similar to caviar. The beads were incorporated in a gel phase (hydroxyethylcellulose 2.5%) containing 3% of dimethylaminoethanol. Stability was evaluated in different storage conditions (sunlight exposure, 5 ± 2 °C, 37 ± 2 °C and r.t.) through the parameters: appearance, color and odor, pH (6-7), density (0.98-1.14 g.mL-1), centrifugation and average size. After approval by the Committee for Ethics in Research (n° 3.503.061), 30 volunteers tested the new formulation and answered a questionnaire. At 2%, caviar extract was able to scavenge 10.9% ± 0.58 of DPPH radical. Formulations showed good stability after 90 days, even considering the average size (7.47 ± 0.41 - 8.4 ± 0.65 mm2). 90% of the sensory test participants reported that they would buy the new product. Therefore, the new product developed demonstrates a promising potential as an attractive cosmetic product.

Preparation and characterization of a novel antimicrobial film dressing for wound healing application

Antibacterial activity and good mechanical properties are some of the characteristics required for an appropriate film dressing. A novel polymer blend was developed for wound healing application. Twenty-four formulations using the polymers chitosan, poly(vinyl alcohol) and/or ɛ-Polylysine and the plasticizer glycerol were designed using factorial design and then the films were prepared by the casting/solvent evaporation method. Seventeen films were obtained among the twenty-four proposed formulations that were characterized by Field Emission Scanning Electron Microscopy (FE-SEM) and Fourier Transform Infrared Spectroscopy (FTIR). Mechanical properties, such as tensile strength (σ), elongation at break (ɛ) and Young's modulus (Y) as well as antibacterial properties were determined. The best candidate was then further analyzed with regard to porosity, Water Vapor Transmission Rate (WVTR), swelling and cytotoxicity experiments. The results showed a film with semi-occlusive characteristics, good mechanical properties and no toxic. Incorporation of ɛ-Polylysine increased antibacterial activity against gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) bacteria

Preparation and characterization of liposomes loaded with silver nanoparticles obtained by green synthesis

The objective of this work was to develop and characterize liposomes loaded with silver nanoparticles (LAgNPs) to show improvement in stability characteristics. AgNPs were prepared by the green synthesis method with Aloe vera gel extract and exposure to sunlight. Liposomes were prepared by the modified reverse phase method. Particle size, polydispersity index, zeta potential, as well as the scanning electron microscopy (SEM) morphological aspects of AgNPs and LAgNPs were evaluated. In addition, was used flame atomic absorption spectroscopy to determine the amount of AgNP that was encapsulated in liposomes. The AgNPs presented as amorphous and polydisperse structures, with a mean diameter of 278.46 nm and zeta potential of -18.3 mV. LAgNPs had a mean diameter between 321 and 373 nm, the polydispersity index close to 0.2 and a zeta potential around -40 mV, which indicates greater stability to the AgNPs. The images obtained by SEM show semicircular structures for AgNPs and well-defined spherical shape for LAgNPs. The percentage of encapsulation was between 51.81 to 58.83%. These results showed that LAgNPs were obtained with adequate physicochemical characteristics as a release system.

Characterization and Cytotoxic Evaluation of Silver and Gold Nanoparticles Produced with Aqueous Extract of Lavandula dentata L. in Relation to K-562 Cell Line

Abstract Metallic nanoparticles have great potential as a chemotherapeutic agent. The aim of this study was to develop and characterize silver and gold nanoparticles using a simple method, as well as evaluating the potential cytotoxic activity in relation to the K-562 cell line. For the synthesis, a solution containing the metallic ions was subjected to magnetic stirring with the aqueous extract of Lavandula dentata L. and a change of colour was observed. With the data obtained from the analyses we concluded that the nanoparticles were successfully obtained by a simple and green method using the aqueous extract of L. dentata. The obtained nanoparticles presented a reduced size, a low level of polydispersion, and a homogenous spherical shape. The nanoparticles presented intense and characteristic diffraction peaks, which could be correlated to the planes of the centred cubic structure of the silver and gold. The two formulations presented predominantly crystalline characteristics. The infrared analysis suggested that the amides and alcohols present in the samples may have been responsible for the reduction and limitation of the size and dispersion of the silver and gold nanoparticles. The cytotoxic assay showed that the nanoparticles demonstrated great potential to reduce the cell viability of the K-562 cell line, especially the gold nanoparticles.

Chemical Composition and Biological Activities of The Essential Oil And Anatomical Markers Of Lavandula Dentata L. Cultivated In Brazil

ABSTRACT Lavandula dentata, popularly known as lavender, is commonly used in traditional medicine for the treatment of digestive and inflammatory disorders. The objective of this study was to analyzed the chemical oil composition, antioxidant and antimicrobial activities of the essential oil and anatomical markers of the leaf and stem of L. dentata cultivated in South Brazil. Essential oil showed an antioxidant activity similar to rutin and gallic acid when analyzed by phosphomolybdenum method. However, by the free radical DPPH and ABTS methods, it showed a slight potential antioxidant. Essential oil presented 1,8-cineol (63%) as major component, antimicrobial activity against Gram-positive, Gram-negative bacteria strains and Candida albicans, by broth microdilution. The anatomical profile provided the following main microscopic markers: hypostomatic leaves; diacytic stomata, thin and striate cuticle; multicellular and branched non-glandular trichomes; capitate glandular trichomes; peltate glandular trichomes; dorsiventral mesophyll; flat-convex shape midrib, truncated on the abaxial side; one collateral vascular bundle in the midrib; square stem shape, angular collenchyma alternated with cortical parenchyma; sclerenchymatic fibers well-developed on the four edges.

Changes in arbuscular mycorrhizal associations and fine root traits in sites under different plant successional phases in southern Brazil.

Fine root morphological traits and distribution, arbuscular mycorrhizal (AM) fungi, soil fertility, and nutrient concentration in fine root tissue were compared in sites under different successional phases: grass plants, secondary forest, and mature forest in Londrina county, Paraná state, southern Brazil. Soil cores were collected randomly at the 0-10- and 10-20-cm depths in three quadrants (50 m2) in each site. Plants from the different successional stages displayed high differences in fine root distribution, fine root traits, and mycorrhizal root colonization. There were increases in the concentration of nutrients both in soil and fine roots and decrease of bulk soil density along the succession. The fine root biomass and diameter increased with the succession progress. The total fine root length, specific root length, root hair length, and root hair incidence decreased with the succession advance. Similarly, the mycorrhizal root colonization and the density of AM fungi spores in the soil decreased along the succession. Mycorrhizal root colonization and spore density were positively correlated with fine root length, specific root length, root hair length, root hair incidence, and bulk density and negatively correlated with fine root diameter and concentration of some nutrients both in soil and root tissues. Nutrient concentration in root tissue and in soil was positively correlated with fine root diameter and negatively correlated with specific root length, root hair length, and root hair incidence. These results suggest different adaptation strategies of plant roots for soil exploration and mineral acquisition among the different successional stages. Early successional stages displayed plants with fine root morphology and AM fungi colonization to improve the root functional efficiencies for uptake of nutrients and faster soil resource exploration. Late successional stages displayed plants with fine root morphology and mycorrhizal symbiosis for both a lower rate of soil proliferation and soil exploration capacity to acquire nutrients.

Técnica indireta-direta para resinas compostas: coroas leves / Direct-indirect technique for composite resins: partial crowns

Baseado em um caso clínico, o artigo apresenta a descrição do protocolo para confecção da técnica indireta-direta para “coroas leves” de resina composta. Essa técnica prioriza a confecção laboratorial de facetas estendidas por palatal e, posterior cimentação intraoralmente e finalização com a confecção das faces proximais com matriz metabólica bicôncava pré-formada. A técnica destaca-se pelo conservadorismo, maior área de adesão, minimização do estresse emocional (do profissional e paciente), menor tempo clínico e excelência nas características ópticas.

This case report presents the description of the protocol for the fabrication of a direct-indirect for "partial" composite resin crowns. This technique emphasizes the laboratory fabrication of veneers extended to palatal and subsequent cementation and intraoral fabrication of the proximal surfaces using a preformed biconcave metal matrix. The technique is advantageous for conservadorism, greater adhesion area, minimization of emotional stress (for the professional and the patient), time-saving and excellent optical characteristics.