Deletion of the polyketide synthase-encoding gene pks1 prevents melanization in the extremophilic fungus Cryomyces antarcticus.

Cryomyces antarcticus, a melanized cryptoendolithic fungus endemic to Antarctica, can tolerate environmental conditions as severe as those in space. Particularly, its ability to withstand ionizing radiation has been attributed to the presence of thick and highly melanized cell walls, which-according to a previous investigation-may contain both 1,8-dihydroxynaphthalene (DHN) and L-3,4 dihydroxyphenylalanine (L-DOPA) melanin. The genes putatively involved in the synthesis of DHN melanin were identified in the genome of C. antarcticus. Most important is capks1 encoding a non-reducing polyketide synthase (PKS) and being the ortholog of the functionally characterized kppks1 from the rock-inhabiting fungus Knufia petricola. The co-expression of CaPKS1 or KpPKS1 with a 4'-phosphopantetheinyl transferase in Saccharomyces cerevisiae resulted in the formation of a yellowish pigment, suggesting that CaPKS1 is the enzyme providing the precursor for DHN melanin. To dissect the composition and function of the melanin layer in the outer cell wall of C. antarcticus, non-melanized mutants were generated by CRISPR/Cas9-mediated genome editing. Notwithstanding its slow growth (up to months), three independent non-melanized Δcapks1 mutants were obtained. The mutants exhibited growth similar to the wild type and a light pinkish pigmentation, which is presumably due to carotenoids. Interestingly, visible light had an adverse effect on growth of both melanized wild-type and non-melanized Δcapks1 strains. Further evidence that light can pass the melanized cell walls derives from a mutant expressing a H2B-GFP fusion protein, which can be detected by fluorescence microscopy. In conclusion, the study reports on the first genetic manipulation of C. antarcticus, resulting in non-melanized mutants and demonstrating that the melanin is rather of the DHN type. These mutants will allow to elucidate the relevance of melanization for surviving extreme conditions found in the natural habitat as well as in space.

The Tet-on system for controllable gene expression in the rock-inhabiting black fungus Knufia petricola.

Knufia petricola is a black fungus that colonizes sun-exposed surfaces as extreme and oligotrophic environments. As ecologically important heterotrophs and biofilm-formers on human-made surfaces, black fungi form one of the most resistant groups of biodeteriorating organisms. Due to its moderate growth rate in axenic culture and available protocols for its transformation and CRISPR/Cas9-mediated genome editing, K. petricola is used for studying the morpho-physiological adaptations shared by extremophilic and extremotolerant black fungi. In this study, the bacteria-derived tetracycline (TET)-dependent promoter (Tet-on) system was implemented to enable controllable gene expression in K. petricola. The functionality i.e., the dose-dependent inducibility of TET-regulated constructs was investigated by using GFP fluorescence, pigment synthesis (melanin and carotenoids) and restored uracil prototrophy as reporters. The newly generated cloning vectors containing the Tet-on construct, and the validated sites in the K. petricola genome for color-selectable or neutral insertion of expression constructs complete the reverse genetics toolbox. One or multiple genes can be expressed on demand from different genomic loci or from a single construct by using 2A self-cleaving peptides, e.g., for localizing proteins and protein complexes in the K. petricola cell or for using K. petricola as host for the expression of heterologous genes.

Corrosive extracellular polysaccharides of the rock-inhabiting model fungus Knufia petricola.

Melanised cell walls and extracellular polymeric matrices protect rock-inhabiting microcolonial fungi from hostile environmental conditions. How extracellular polymeric substances (EPS) perform this protective role was investigated by following development of the model microcolonial black fungus Knufia petricola A95 grown as a sub-aerial biofilm. Extracellular substances were extracted with NaOH/formaldehyde and the structures of two excreted polymers studied by methylation as well as NMR analyses. The main polysaccharide (~ 80%) was pullulan, also known as α-1,4-; α-1,6-glucan, with different degrees of polymerisation. Αlpha-(1,4)-linked-Glcp and α-(1,6)-linked-Glcp were present in the molar ratios of 2:1. A branched galactofuromannan with an α-(1,2)-linked Manp main chain and a ß-(1,6)-linked Galf side chain formed a minor fraction (~ 20%). To further understand the roles of EPS in the weathering of minerals and rocks, viscosity along with corrosive properties were studied using atomic force microscopy (AFM). The kinetic viscosity of extracellular K. petricola A95 polysaccharides (≈ 0.97 × 10-6 m2 s-1) ranged from the equivalent of 2% (w/v) to 5% glycerine, and could thus profoundly affect diffusion-dominated processes. The corrosive nature of rock-inhabiting fungal EPS was also demonstrated by its effects on the aluminium coating of the AFM cantilever and the silicon layer below.

Magnesium Stable Isotope Fractionation on a Cellular Level Explored by Cyanobacteria and Black Fungi with Implications for Higher Plants.

In a controlled growth experiment we found that the cyanobacterium Nostoc punctiforme has a bulk cell 26Mg/24Mg ratio (expressed as δ26Mg) that is -0.27‰ lower than the growth solution at a pH of ca. 5.9. This contrasts with a recently published δ26Mg value that was 0.65‰ higher than growth solution for the black fungus Knufia petricola at similar laboratory conditions, interpreted to reflect loss of 24Mg during cell growth. By a mass balance model constrained by δ26Mg in chlorophyll extract we inferred the δ26 Mg value of the main Mg compartments in a cyanobacteria cell: free cytosolic Mg (-2.64‰), chlorophyll (1.85‰), and the nonchlorophyll-bonded Mg compartments like ATP and ribosomes (-0.64‰). The lower δ26Mg found in Nostoc punctiforme would thus result from the absence of significant Mg efflux during cell growth in combination with either (a) discrimination against 26Mg during uptake by desolvation of Mg or transport across protein channels or (b) discrimination against 24Mg in the membrane transporter during efflux. The model predicts the preferential incorporation of 26Mg in cells and plant organs low in Mg and the absence of isotope fractionation in those high in Mg, corroborated by a compilation of Mg isotope ratios from fungi, bacteria, and higher plants.

Active Antibacterial and Antifouling Surface Coating via a Facile One-Step Enzymatic Cross-Linking.

Prevention of microbial contamination of surfaces is one of the biggest challenges for biomedical applications. Establishing a stable, easily produced, highly antibacterial surface coating offers an efficient solution but remains a technical difficulty. Here, we report on a new approach to create an in situ hydrogel film-coating on glass surfaces made by enzymatic cross-linking under physiological conditions. The cross-linking is catalyzed by horseradish peroxidase (HRP)/glucose oxidase (GOD)-coupled cascade reactions in the presence of glucose and results in 3D dendritic polyglycerol (dPG) scaffolds bound to the surface of glass. These scaffolds continuously release H2O2 as long as glucose is present in the system. The resultant polymeric coating is highly stable, bacterial-repellent, and functions under physiological conditions. Challenged with high loads of bacteria (OD540 = 1.0), this novel hydrogel and glucose-amended coating reduced the cell viability of Pseudomonas putida (Gram-negative) by 100% and Staphylococcus aureus (Gram-positive) by ≥40%, respectively. Moreover, glucose-stimulated production of H2O2 by the coating system was sufficient to kill both test bacteria (at low titers) with >99.99% efficiency within 24 h. In the presence of glucose, this platform produces a coating with high effectiveness against bacterial adhesion and survival that can be envisioned for the applications in the glucose-associated medical/oral devices.

Mg Isotope Fractionation during Uptake by a Rock-Inhabiting, Model Microcolonial Fungus Knufia petricola at Acidic and Neutral pH.

The model rock-inhabiting microcolonial fungus Knufia petricola fractionates stable Mg isotopes in a time- and pH-dependent manner. During growth, the increase of 26Mg/24Mg in the fungal cells relative to the growth media amounted to 0.65 ± 0.14‰ at pH 6 and 1.11 ± 0.35‰ at pH 3. We suggest a constant equilibrium fractionation factor during incorporation of Mg into ribosomes and ATP as a cause of enrichment of 26Mg in the cells. We suggest too that the proton gradient across the cell wall and cytoplasmic membrane controls Mg2+ transport into the fungal cell. As the strength of this gradient is a function of extracellular solution pH, the pH-dependence on Mg isotope fractionation is thus due to differences in fungal cell mass fluxes. Through a mass balance model we show that Mg uptake into the fungal cell is not associated with a unique Mg isotope fractionation factor. This Mg isotope fractionation dependence on pH might also be observed in any organism with cells that follow similar Mg uptake and metabolic pathways and serves to reveal Mg cycling in ecosystems.

A novel qPCR protocol for the specific detection and quantification of the fuel-deteriorating fungus Hormoconis resinae.

A wide variety of fungi and bacteria are known to contaminate fuels and fuel systems. These microbial contaminants have been linked to fuel system fouling and corrosion. The fungus Hormoconis resinae, a common jet fuel contaminant, is used in this study as a model for developing innovative risk assessment methods. A novel qPCR protocol to detect and quantify H. resinae in, and together with, total fungal contamination of fuel systems is reported. Two primer sets, targeting the markers RPB2 and ITS, were selected for their remarkable specificity and sensitivity. These primers were successfully applied on fungal cultures and diesel samples demonstrating the validity and reliability of the established qPCR protocol. This novel tool allows clarification of the current role of H. resinae in fuel contamination cases, as well as providing a technique to detect fungal outbreaks in fuel systems. This tool can be expanded to other well-known fuel-deteriorating microorganisms.

Microbial colonization affects the efficiency of photovoltaic panels in a tropical environment.

Sub-aerial biofilm (SAB) development on solar panels was studied in São Paulo. After 6, 12 and 18 months' exposure, photovoltaic panels were covered by increasing proportions of organic matter (42%, 53% and 58%, respectively). Fungi were an important component of these biofilms; very few phototrophs were found. Major microorganisms detected were melanised meristematic ascomycetes and pigmented bacterial genera Arthrobacter and Tetracoccus. While diverse algae, cyanobacteria and bacteria were identified in biofilms at 6 and 12 months, diversity at a later stage was reduced to that typical for SAB: the only fungal group detected in 18 month biofilm was the meristematic Dothideomycetes and the only phototrophs Ulothrix and Chlorella. Photovoltaic modules showed significant power reductions after 6, 12 (both 7%) and 18 (11%) months. The lack of difference in power reduction between 6 and 12 months reflects the dual nature of soiling, which can result from the deposition of particulates as well as from SAB fouling. Although 12-month old SAB demonstrated an almost 10-fold increase in fungal colonization and a higher organic content, the larger non-microbial particles (above 10 µm), which were important for efficiency reduction of lightly-biofilmed panels, were removed by high rainfall just before the 12-month sampling.

Microbiology of the atmosphere-rock interface: how biological interactions and physical stresses modulate a sophisticated microbial ecosystem.

Life at the atmosphere-lithosphere boundary is an ancient terrestrial niche that is sparsely covered by thin subaerial biofilms. The microbial inhabitants of these biofilms (a) have adapted to all types of terrestrial/subaerial stresses (e.g., desiccation, extreme temperatures, low nutrient availability, intense solar radiation), (b) interact with minerals that serve as both a dwelling and a source of mineral nutrients, and (c) provoke weathering of rocks and soil formation. Subaerial communities comprise heterotrophic and phototrophic microorganisms that support each other's lifestyle. Major lineages of eubacteria associated with the early colonization of land (e.g., Actinobacteria, Cyanobacteria) are present in these habitats along with eukaryotes such as microscopic green algae and ascomycetous fungi. The subaerial biofilm inhabitants have adapted to desiccation, solar radiation, and other environmental challenges by developing protective, melanized cell walls, assuming microcolonial architectures and symbiotic lifestyles. How these changes occurred, their significance in soil formation, and their potential as markers of climate change are discussed below.

Microfluidic Platform with Precisely Controlled Hydrodynamic Parameters and Integrated Features for Generation of Microvortices to Accurately Form and Monitor Biofilms in Flow.

Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.

Nutritional physiology of a rock-inhabiting, model microcolonial fungus from an ancestral lineage of the Chaetothyriales (Ascomycetes).

Rock-inhabiting black fungi [also microcolonial or meristematic fungi (MCF)] are a phylogenetically diverse group of melanised ascomycetes with distinctive morphological features that confer extensive stress tolerance and permit survival in hostile environments. The MCF strain A95 Knufia petricola (syn. Sarcinomyces petricola) belongs to an ancestral lineage of the order Chaetothyriales (class Eurotiomycetes). K. petricola strain A95 is a rock-inhabiting MCF and its growth requirements were studied using the 96-well plate-based Biolog System under ∼1070 different conditions (osmotic stress, pH growth optima, growth factor requirements and nutrient catabolism). A95 is an osmotolerant, oligotrophic MCF that grows best around pH 5. Remarkably, A95 shows metabolic activity in the absence of added nitrogen, phosphorus or sulphur. Correlations could be drawn between the known nutrient requirements of A95 and what probably is available in sub-aerial systems (rock and other material surfaces). Detailed knowledge of A95's metabolic requirements allowed formulation of a synthetic medium that supports strong fungal growth.

Geodermatophilus telluris sp. nov., an actinomycete isolated from Saharan desert sand.

A novel Gram-positive, multiloculated thalli-forming, aerobic, actinobacterial strain, CF9/1/1(T), was isolated in 2007 during environmental screening for xerophilic fungi in arid desert soil from the Sahara desert, Chad. The isolate grew best at a temperature range of 20-35 °C and at pH 6.0-8.5 and with 0-4% (w/v) NaCl, forming black-coloured and irregular colonies on GYM agar. Chemotaxonomic and molecular characteristics of the isolate matched those described for members of the genus Geodermatophilus. The DNA G+C content of the novel strain was 75.4 mol%. The peptidoglycan contained meso-diaminopimelic acid as a diagnostic diamino acid. The main phospholipids were diphosphatidylglycerol, phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol, a not yet structurally identified aminophospholipid and a small amount of phosphatidylglycerol; MK-9(H4) was identified as the dominant menaquinone and galactose was a diagnostic sugar. The major cellular fatty acids were branched-chain saturated acids: iso-C16:0 and iso-C15:0. The 16S rRNA gene sequence of the isolate showed 94.6-97.0% sequence similarities with those of five members of the genus: Geodermatophilus ruber DSM 45317(T) (94.6%), Geodermatophilus obscurus DSM 43160(T) (94.8%), Geodermatophilus siccatus DSM 45419(T) (96.2%), Geodermatophilus nigrescens DSM 45408(T) (96.7%) and Geodermatophilus arenarius DSM 45418(T) (97.0%). Based on the evidence from this polyphasic taxonomic study, a novel species, Geodermatophilus telluris sp. nov., is proposed; the type strain is CF9/1/1(T) (=DSM 45421(T)=CCUG 62764(T)).

Geodermatophilus normandii sp. nov., isolated from Saharan desert sand.

A novel Gram-reaction-positive actinobacterial strain, designated CF5/3(T), was isolated from a sand sample obtained in the Sahara Desert, Chad. The greenish-black-pigmented isolate was aerobic and exhibited optimal growth from 25-40 °C at pH 6.0-10.0 with 0-1% (w/v) NaCl. Chemotaxonomic and molecular characteristics of the isolate matched those described for members of the genus Geodermatophilus. The DNA G+C content of the genome of the novel strain was 75.5 mol%. The peptidoglycan contained meso-diaminopimelic acid as diagnostic diamino acid. The main phospholipids were diphosphatidylglycerol, phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol and a minor fraction of phosphatidylglycerol. MK-9(H4) was the dominant menaquinone, and galactose was detected as a diagnostic sugar. The major cellular fatty acids were branched-chain saturated acids: iso-C(15:0) and iso-C(16:0). Analysis of 16S rRNA gene sequences showed 95.6-98.8% pairwise sequence identity with the members of the genus Geodermatophilus. Based on phenotypic and chemotaxonomic properties, as well as phylogenetic distinctiveness, the isolate represents a novel species, Geodermatophilus normandii, with the type strain CF5/3(T) ( =DSM 45417(T) =CCUG 62814(T) =MTCC 11412(T)).

Geodermatophilus siccatus sp. nov., isolated from arid sand of the Saharan desert in Chad.

A novel Gram-positive, aerobic, actinobacterial strain, CF6/1(T), was isolated in 2007 during environmental screening of arid desert soil in the Sahara near to Ourba, Chad. The isolate was found to grow best in a temperature range of 20-37 °C and at pH 6.0-8.5 and showed no NaCl tolerance, forming black-coloured and nearly circular colonies on GYM agar. Chemotaxonomic and molecular characteristics determined for the isolate match those previously described for members of the genus Geodermatophilus. The DNA G + C content of the novel strain was determined to be 74.9 mol %. The peptidoglycan was found to contain meso-diaminopimelic acid as the diagnostic diamino acid. The main phospholipids were determined to be phosphatidylethanolamine, phosphatidylinositol, phosphatidylcholine, diphosphatidylglycerol and traces of phosphatidylglycerol; MK-9(H(4)) was identified as the dominant menaquinone and galactose as the diagnostic sugar. The major cellular fatty acids were found to be the branched-chain saturated acids iso-C(16:0) and iso-C(15:0), as well as C(17:1ω8c). The 16S rRNA gene sequence shows 97.5-97.9 % sequence identity with the four validly named or at least effectively published members of the genus: Geodermatophilus obscurus (97.5 %), Geodermatophilus arenarius (97.7 %), Geodermatophilus ruber (97.9 %) and Geodermatophilus nigrescens (97.9 %). Based on the results from this polyphasic taxonomic analysis and DNA-DNA hybridizations with all type strains of the genus, we propose that strain CF6/1(T) represents a novel species, Geodermatophilus siccatus, with the type strain CF6/1(T) = DSM 45419(T) = CCUG 62765(T) = MTCC 11414(T).

Geodermatophilus africanus sp. nov., a halotolerant actinomycete isolated from Saharan desert sand.

A novel Gram-strain positive, aerobic, actinobacterial strain, designated CF11/1(T), was isolated from a sand sample obtained in the Sahara Desert, Chad. The black-pigmented isolate was aerobic and exhibited optimal growth from 25 to 35 °C at pH 6.0-8.0 and with 0-8 % (w/v) NaCl, indicating that it is a halotolerant mesophile. Chemotaxonomic and molecular characteristics of the isolate matched those described for members of the genus Geodermatophilus. The G+C content in the genome was 74.4 mol%. The peptidoglycan contained meso-diaminopimelic acid as diagnostic diaminoacid. The main phospholipids were diphosphatidylglycerol, phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol and a minor fraction of phosphatidylglycerol; MK-9(H4) was the dominant menaquinone, and galactose was detected as a diagnostic sugar. The major cellular fatty acid was branched-chain saturated acid iso-C16:0. Analysis of 16S rRNA gene sequences showed 95.3-98.6 % pairwise sequence identity with the members of the genus Geodermatophilus. Based on phenotypic and chemotaxonomic properties, as well as phylogenetic distinctiveness, the isolate represents a novel species, Geodermatophilus africanus, with the type strain CF11/1(T) (DSM 45422 = CCUG 62969 = MTCC 11556).

Microscopic Raman study of fungal pigment using the genetically amenable rock inhabitant Knufia petricola as a model organism.

Fungal pigments such as melanin and carotenoids are distinctive markers of animal and plant pathogenic fungi as well as their environmental relatives. These complex pigments play important roles in pathogenicity and stress tolerance while also being useful as biomarkers. Accordingly, it is important to be able to identify in situ the pigments in black fungi, a group of clinical and environmental importance. In this study, wild-type and genetically modified strains of Knufia petricola A95 and wild fungal cells attached to ancient rock were investigated for their spectroscopic and microscopic Raman features and morphological appearance. Knockout mutants of melanin synthesis genes pks1 (polyketide synthase), sdh1 (scytalone dehydratase), and both pks1 and the carotenoid synthesis gene phd1 (phytoene desaturase) were studied We applied two different Raman microscopes using two lasers, with 633 nm and 488 nm wavelengths. We analyzed and compared Raman spectra between the measured reference substances and the mutant and wild-type strains. In the wild strain WT:A95, the peaks close to melanin peals were found at 1353 cm-1 and 1611 cm-1. There are no characteristic melanin peaks at 1580-1600 cm-1 and around 1350 cm-1 at the spectrum of the Δpks1/Δphd1 mutant and the Δsdh1 mutant. The Δpks1 mutant spectrum has the peaks at the beta-carotene v2 C-C in-plane stretch at 1155 cm-1 and v3 C-CH3 deformation at 1005 cm-1. The peaks of carotenoids and melanin were found in all mutants and the wild strain, except the Δpks1/Δphd1 mutant. Raman spectra allow for discrimination between the various pigments. Hence, interactions between natural fungal melanin, as well as other protective pigments, and complex environmental matrices can be characterized on a range of spatial and temporal scales.

Genetic Engineering of the Rock Inhabitant Knufia petricola Provides Insight Into the Biology of Extremotolerant Black Fungi.

Black microcolonial fungi (Ascomycetes from Arthonio-, Dothideo-, and Eurotiomycetes) are stress-tolerant and persistent dwellers of natural and anthropogenic extreme habitats. They exhibit slow yeast-like or meristematic growth, do not form specialized reproduction structures and accumulate the black pigment 1,8-dihydroxynaphthalene (DHN) melanin in the multilayered cell walls. To understand how black fungi live, survive, colonize mineral substrates, and interact with phototrophs genetic methods are needed to test these functions and interactions. We chose the rock inhabitant Knufia petricola of the Chaetothyriales as a model for developing methods for genetic manipulation. Here, we report on the expansion of the genetic toolkit by more efficient multiplex CRISPR/Cas9 using a plasmid-based system for expression of Cas9 and multiple sgRNAs and the implementation of the three resistance selection markers genR (geneticin/nptII), baR (glufosinate/bar), and suR (chlorimuron ethyl/sur). The targeted integration of expression constructs by replacement of essential genes for pigment synthesis allows for an additional color screening of the transformants. The black-pink screening due to the elimination of pks1 (melanin) was applied for promoter studies using GFP fluorescence as reporter. The black-white screening due to the concurrent elimination of pks1 and phs1 (carotenoids) allows to identify transformants that contain the two expression constructs for co-localization or bimolecular fluorescence complementation (BiFC) studies. The co-localization and interaction of the two K. petricola White Collar orthologs were demonstrated. Two intergenic regions (igr1, igr2) were identified in which expression constructs can be inserted without causing obvious phenotypes. Plasmids of the pNXR-XXX series and new compatible entry plasmids were used for fast and easy generation of expression constructs and are suitable for a broad implementation in other fungi. This variety of genetic tools is opening a completely new perspective for mechanistic and very detailed study of expression, functioning and regulation of the genes/proteins encoded by the genomes of black fungi.

Suppression of experimental autoimmune encephalomyelitis by IgG Fc fragments bearing regRF epitopes.

Previously we identified a rheumatoid factor, the production of which provides rats with resistance to experimental autoimmune diseases. It has been named regulatory rheumatoid factor (regRF). Immunization with conformers of IgG Fc fragments carrying epitopes specific to regRF reduces rat collagen-induced arthritis. The aim of this study was to determine whether IgG Fc fragments bearing regRF epitopes suppress experimental autoimmune encephalomyelitis, and to evaluate the potential of a strategy of stimulating production of regRF to treat multiple sclerosis. Two days after myelin basic protein injection, rats were immunized with Fc fragments exhibiting regRF epitopes, as well as with Fc fragments without those epitopes. The effect of Fc immunization on clinical signs of EAE and immunological parameters was evaluated. Stimulation of regRF production by IgG Fc fragments bearing regRF epitopes diminished EAE symptoms in rats, while immunization with Fc fragments without those epitopes worsened EAE. The improvement of EAE symptoms in rats treated with Fc fragments bearing regRF epitopes was associated with regRF production and with the relatively low number of blood CD4 T lymphocytes during disease development. In experiments involving immunizing intact rats and lymph node mononuclear cell cultures, Fc fragments bearing regRF epitopes decreased the CD4 T lymphocyte population indirectly, via regRF production. RegRF is a promising biotarget in MS, and Fc fragments bearing regRF epitopes are a potential therapeutic agent for MS.

Searching for biological feedstock material: 3D printing of wood particles from house borer and drywood termite frass.

Frass (fine powdery refuse or fragile perforated wood produced by the activity of boring insects) of larvae of the European house borer (EHB) and of drywood termites was tested as a natural and novel feedstock for 3D-printing of wood-based materials. Small particles produced by the drywood termite Incisitermes marginipennis and the EHB Hylotrupes bajulus during feeding in construction timber, were used. Frass is a powdery material of particularly consistent quality that is essentially biologically processed wood mixed with debris of wood and faeces. The filigree-like particles flow easily permitting the build-up of wood-based structures in a layer wise fashion using the Binder Jetting printing process. The quality of powders produced by different insect species was compared along with the processing steps and properties of the printed parts. Drywood termite frass with a Hausner Ratio HR = 1.1 with ρBulk = 0.67 g/cm3 and ρTap = 0.74 g/cm3 was perfectly suited to deposition of uniformly packed layers in 3D printing. We suggest that a variety of naturally available feedstocks could be used in environmentally responsible approaches to scientific material sciences/additive manufacturing.

Light sensing in plant- and rock-associated black fungi.

Fungi that share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. But to cope with sunlight-associated stresses [e.g. high temperatures, UV radiation with associated DNA damage, accumulation of reactive oxygen species (ROS), desiccation and osmotic stresses] it is important for fungi to accurately sense and respond to changes in light. To test the hypothesis that light is an environmental cue that Ascomycota use to coordinate growth, stress responses as well as to establish pathogenic or symbiotic relationships, the photoreceptor (PR) distribution in species from different ecological niches was analysed. The genomes of black [dihydroxynaphthalene (DHN) melanin-containing] fungi from phyllosphere and exposed solid surfaces contain multiple photoreceptors (PRs). The plant pathogen Botrytis cinerea (Leotiomycetes) has a highly sophisticated photosensory and signalling system that helps to avoid light and to locate susceptible hosts. Rock-inhabiting Dothideomycetes and Eurotiomycetes including Knufia petricola possess equal numbers of PRs along with the same set of protective pigments. This similarity between black fungi from plant and rock surfaces suggests that photoperception and -regulation are important for fungi that receive nutrients through cooperation with phototrophs. Genetic tools for manipulating K. petricola exist and will be used to test this idea.