Energy yield modelling of textured perovskite/silicon tandem photovoltaics with thick perovskite top cells.

Recent advances in solution processing of micrometer-thick perovskite solar cells over textured silicon bottom solar cells allowed a new promising approach for the fabrication of 2T perovskite/silicon tandem photovoltaics, combining optimal light management in the textured bottom cell with the ease of solution processing. Detailed simulations are needed to assess the performances of this morphology configuration (thick perovskite configuration). In this work, in-depth optical and energy yield (EY) simulations are performed to compare the thick perovskite configuration with other relevant morphology configurations for 2T perovskite/silicon tandem photovoltaics. Under standard test conditions, the total photogenerated current of the thick perovskite configuration is 1.3 mA cm-2 lower (-3.4% relative) than the one of the conformal perovskite on textured silicon configuration for non-encapsulated cells and only 0.8 mA cm-2 (-2.1% relative) for encapsulated cells. Under realistic outdoor conditions, EY modelling for a wide range of locations shows that, while conformal perovskite on textured silicon configuration remains the optimal configuration, thick perovskite configuration exhibits a mere ∼2.5% lower annual EY. Finally, intermediate scenarios are investigated with the angle of the perovskite front-side texture differing from the silicon texture and critical angles for efficient light management in these configurations are identified.

Triple-junction perovskite-perovskite-silicon solar cells with power conversion efficiency of 24.4.

The recent tremendous progress in monolithic perovskite-based double-junction solar cells is just the start of a new era of ultra-high-efficiency multi-junction photovoltaics. We report on triple-junction perovskite-perovskite-silicon solar cells with a record power conversion efficiency of 24.4%. Optimizing the light management of each perovskite sub-cell (∼1.84 and ∼1.52 eV for top and middle cells, respectively), we maximize the current generation up to 11.6 mA cm-2. Key to this achievement was our development of a high-performance middle perovskite sub-cell, employing a stable pure-α-phase high-quality formamidinium lead iodide perovskite thin film (free of wrinkles, cracks, and pinholes). This enables a high open-circuit voltage of 2.84 V in a triple junction. Non-encapsulated triple-junction devices retain up to 96.6% of their initial efficiency if stored in the dark at 85 °C for 1081 h.

Monolithic Two-Terminal Perovskite/CIS Tandem Solar Cells with Efficiency Approaching 25.

Monolithic two-terminal (2T) perovskite/CuInSe2 (CIS) tandem solar cells (TSCs) combine the promise of an efficient tandem photovoltaic (PV) technology with the simplicity of an all-thin-film device architecture that is compatible with flexible and lightweight PV. In this work, we present the first-ever 2T perovskite/CIS TSC with a power conversion efficiency (PCE) approaching 25% (23.5% certified, area 0.5 cm2). The relatively planar surface profile and narrow band gap (∼1.03 eV) of our CIS bottom cell allow us to exploit the optoelectronic properties and photostability of a low-Br-containing perovskite top cell as revealed by advanced characterization techniques. Current matching was attained by proper tuning of the thickness and bandgap of the perovskite, along with the optimization of an antireflective coating for improved light in-coupling. Our study sets the baseline for fabricating efficient perovskite/CIS TSCs, paving the way for future developments that might push the efficiencies to over 30%.