Mechanomics Biomarker for Cancer Cells Unidentifiable through Morphology and Elastic Modulus.

Cellular mechanical properties are potential cancer biomarkers used for objective cytology to replace the current subjective method relying on cytomorphology. However, heterogeneity among intra/intercellular mechanics and the interplay between cytoskeletal prestress and elastic modulus obscured the difference detectable between malignant and benign cells. In this work, we collected high density nanoscale prestress and elastic modulus data from a single cell by AFM indentation to generate a cellular mechanome. Such high dimensional mechanome data was used to train a malignancy classifier through machine learning. The classifier was tested on 340 single cells of various origins, malignancy, and degrees of similarity in morphology and elastic modulus. The classifier showed instrument-independent robustness and classification accuracy of 89% with an AUC-ROC value of 93%. A signal-to-noise ratio 8 times that of the human-cytologist-based morphological method was also demonstrated, in differentiating precancerous hyperplasia cells from normal cells derived from the same lung cancer patient.

Transparent dynamic metasurface for a visually unaffected reconfigurable intelligent surface: controlling transmission/reflection and making a window into an RF lens.

Reconfigurable intelligent surfaces (RISs) that dynamically manipulate scattered waves have attracted much attention regarding accommodating coverage holes in wireless communication systems using radio wave frequencies higher than millimeter waves. RISs generally actualized through metasurface technologies must be visually unaffected so that they can be installed in various locations such as existing walls and glass windows in environments where propagation should be controlled. We propose a novel method that dynamically controls scattering characteristics of metasurfaces while achieving a large area and high optical transparency. For transparency in the visible light range, we use transparent glass as a substrate and meshed metal patterns. Furthermore, by stacking a metasurface substrate onto another transparent substrate and controlling the interlayer distance, we achieve dynamic control of the scattered waves over a large area in the 28-GHz band. Fabricated prototypes successfully operate when switching transmission and reflection modes, exhibiting extremely low loss of less than -1 dB. In metasurface lenses that can be attached to glass windows in outdoor-to-indoor scenarios, the lens gain of 25.4 dB is achieved for a static lens, and dynamic switching operation between single focus and dual focus is also successfully verified for a dynamic lens.

Alkyl Chain Length- and Polymorph-Dependent Photomechanochromic Fluorescence of Anthracene Photodimerization in Molecular Crystals: Role of the Lattice Stiffness.

Anthracene-pentiptycene hybrid systems 1-Cn, where n refers to the number of carbon atoms in the linear alkyl chain, crystallize in three different polymorphs, denoted Y (yellow), G (green), and B (blue) forms in terms of the fluorescence color. While all Y-form crystals show the same yellow-to-blue fluorescence color response to the photomechanical stress generated by the anthracene [4+4] photodimerization reaction, the four G forms exhibit distinct photomechanofluorochromism (PMFC): from green to blue for G-1-C4, to orange for G-1-C7, to red for G-1-C8, and to red then blue for G-1-C9, and the B forms show no photochromic activity. The intriguing RGB three-color PMFC and abnormal topochemical reactivity of G-1-C9 are attributed to inherent softness of the crystal lattice.

Timing of male territorial flight and foraging of the large carpenter bee Xylocopa appendiculata related to serotonin in the brain.

To determine how males of the large carpenter bee, Xylocopa appendiculata, maximize access to females while minimizing energy cost and acquiring energy for territorial flights, we investigated the times of territorial flights by males and foraging by males and females. Males were present continuously in territories from 8:00 to 12:00. They approached, chased, and excluded conspecific males from their territories. In the laboratory, males showed higher locomotor and flight activities in the morning and lower activities in the afternoon. Both males and females visited flowers from 8:00 to 16:00, but the most frequent visits were earlier in females (10:00-12:00) than in males (12:00-13:00). Relative body weights in territorial males often increased. These results indicate that the males time their territorial flights to maximize contact with females and obtain nectar as fuel between and after the territorial flights. The time-related territorial flight in males might be based on a time-keeping system in the brain. Brain levels of serotonin and its precursor tryptophan were significantly higher in males collected at 16:00 than at 11:00, suggesting a relation between time-related territorial flight and serotonin synthesis in the brain.

Combined Experimental and Theoretical Studies on Planar Chirality of Partially Overlapped C2-Symmetric [3.3](3,9)Dicarbazolophanes.

Partially overlapped dicarbazolophanes exhibit a planar chirality. In this study, C2-symmetrical [3.3](3,9)dicarbazolophane derivatives (CZ1-CZ3) have been optically resolved by preparative chiral high-performance liquid chromatography for the first time. In their circular dichroism (CD) spectra, moderate Cotton effects (CEs) were observed for their 1Lb and 1La transitions (|Δε| = 10-12 and 51-57 M-1 cm-1, respectively), while intense CEs were notified in their 1B transitions (|Δε| = 156-216 M-1 cm-1), absorption dissymmetry (gabs) factors being in orders of 10-2. Circularly polarized luminescence spectrum was also obtained for cyanamide derivative CZ1, with a comparative luminescence dissymmetry (glum) factor of 0.013. A computational investigation was applied to address the factors for such remarkable chiroptical responses in these dicarbazolophanes of planar chirality. Absolute configurations were unambiguously determined by the comparison of experimental and theoretical CD spectra, which was affirmed by the X-ray crystal structural analysis of enantiomerically pure sulfonamide derivative CZ2.

Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing.

The mechanical behavior of multilayer steel structures fabricated via wire and arc additive manufacturing (WAAM) has been investigated from the multiscale perspective. The multimaterial WAAM approach can control a heterogeneous structure and improve its mechanical properties. In this study, WAAM equipment based on plasma arc welding was used to fabricate two pairs of single- and duplex-phase multilayer steel structures using austenitic and martensitic stainless steel wires. The heterogeneity of these structures was characterized through micro-indentation tests. In addition, tensile tests of the multilayer structures were conducted to evaluate the effect of heterogeneity on macroscopic material properties. The deformation behavior of the heterogeneous multilayer steel structures was investigated by comparison with the finite element simulations of tensile tests in which the finite element models were created according to the estimated local elastoplastic properties from the results of micro-indentation tests. The micro-indentation tests revealed that the local mechanical properties significantly change during WAAM in cases where martensitic stainless steel wire was used. Additionally, strain-induced transformation plasticity was particularly observed in duplex cases, caused by the metastable austenite phase formed according to the thermal history and through the mixing of alloy elements. Thus, the heterogeneity of the multilayer steel structures became more complicated than its design, and consequently, its macroscopic mechanical properties exceeded the upper and lower bounds of a micromechanic estimation. The results show the potential to fabricate a structure having a unique mechanical behavior via the multimaterial WAAM approach.

Stress mapping reveals extrinsic toughening of brittle carbon fiber in polymer matrix.

We conducted an in situ study on CFRP fracturing process using atomic-force-microscopy-based stress-sensitive indentation. Tensile stress distribution during fracture initiation and propagation was directly observed quantitatively. It led to a discovery that previously believed catastrophic fracture of individual carbon fiber develops in a controllable manner in the polymer matrix, exhibiting 10 times increase of fracture toughness. Plastic deformation in crack-bridging polymer matrix was accounted for the toughening mechanism. The model was applied to explain low temperature strength weakening of CFRP bulk material when matrix plasticity was intentionally 'shut down' by cryogenic cooling.

Blue fluorescence from N,O-coordinated BF2 complexes having aromatic chromophores in solution and the solid state.

We prepared amide-heterocycle (HC) compounds having various aromatic π-electron systems (Ar), such as phenyl, naphthyl, furyl, thienyl and phenanthryl moieties, and converted them as ligands to difluoroboronated complexes, Ar@HCs. Blue fluorescence from Ar@HCs was observed in solution and the solid state, and the fluorescence quantum yields (Φf) and lifetimes (τf) were determined. The Φf values in CHCl3 were as small as 0.1 except for the phenanthrene derivatives (0.4-0.6). Observation of the triplet-triplet absorption upon laser flash photolysis of Ar@HCs in solution indicated that the fluorescence process competes with intersystem crossing to the triplet state. Blue fluorescence in the solid state was observed with the Φf values of 0.3-0.7. Based on the crystallographic data, the relationship between the crystal structures and emission features of Ar@HCs in the solid state is discussed.

Stress dependence of indentation modulus for carbon fiber in polymer composite.

Elastic modulus measured through atomic force microscopy (AFM)-based indentation on single carbon fiber (CF) is found with dependence on lateral applied stress. An in situ indentation experiment inside a high-resolution transmission electron microscope was performed to quantitatively understand this phenomenon by observing microstructure change in the indented area. Change of graphitic basal plane misalignment angle during indentation was linked to a continuous change of modulus with the help of finite element simulation. The established relationship between modulus and indentation force was further used to calculate residual stress distribution in CF imbedded in a CF reinforced polymer composite using the AFM indentation technique. The stress-induced formation of nanoscale defects in the CF and their transformation into fracture were directly characterized.

Suitability Evaluation of LaNi5 as Hydrogen-Storage-Alloy Actuator by In-Situ Displacement Measurement during Hydrogen Pressure Change.

The swelling ability of LaNi5 for application to hydrogen-storage-alloy (HSA) actuator is discussed through the measurement of the swelling ratio in hydrogen. The HSA actuator is driven by hydrogen pressure change causing the swelling of HSA. LaNi5 is one of the candidate materials for HSA actuators as well as palladium. Some prototypes of HSA actuators using LaNi5 have been fabricated; however, the kinetic swelling ability of LaNi5 itself has been not investigated. In this paper, the authors investigated the static and kinetic swelling ability of LaNi5 powder under hydrogen atmosphere. The results showed that the swelling ratio increased by 0.12 at the phase transition pressure. Response time decreased with an increase in the charged pressure during absorption, while it remained constant during discharge. Reaction kinetics revealed that these swelling behaviors were explained by hydrogen absorption and lattice expansion. The swelling ability of LaNi5 was also compared with that of palladium. The results show that LaNi5 swells 1.8 times more than palladium under 0.5 MPa. LaNi5 is suitable for an actuator driven repeatedly under more than the phase transition pressure. Palladium can be used for one-way-operation actuator even under 0.1 MPa since its response time during the evacuation was much longer than during the pressurization.

Blue Fluorescence from BF2 Complexes of N,O-Benzamide Ligands: Synthesis, Structure, and Photophysical Properties.

Small molecules having intense luminescence properties are required to promote biological and organic material applications. We prepared five types of benzamides having pyridine, pyridazine, pyrazine, and pyrimidine rings and successfully converted them into three types of the difluoroboronated complexes, Py@BAs, as novel blue fluorophores. Py@BA having a pyridine moiety (2-Py@BA) showed no fluorescence in solution, whereas Py@BAs of pyridazine and pyrazine moieties (2,3-Py@BA and 2,5-Py@BA, respectively) emitted blue fluorescence with quantum yields of ca. 0.1. Transient absorption measurements using laser flash photolysis of the Py@BAs revealed the triplet formation of 2,3- and 2,5-Py@BAs, while little transient signal was observed for 2-Py@BA. Therefore, the deactivation processes from the lowest excited singlet state of fluorescent 2,3- and 2,5-Py@BAs consist of fluorescence and intersystem crossing to the triplet state while that of the nonfluorescent Py@BA is governed almost entirely by internal conversion to the ground state. Conversely, in the solid state, 2-Py@BA emitted intense fluorescence with a fluorescence quantum yield as high as 0.66, whereas 2,3- and 2,5-Py@BAs showed fluorescence with quantum yields of ca. 0.2. The crystal structure of 2-Py@BA took a herringbone packing motif, whereas those for 2,3- and 2,5-Py@BAs were two-dimensional sheetlike. On the basis of the difference in crystal structures, the emission mechanism in the solid state was discussed.

The Total Synthesis of Starfish Ganglioside GP3 Bearing a Unique Sialyl Glycan Architecture.

The total synthesis of ganglioside GP3, which is found in the starfish Asterina pectinifera, has been accomplished through stereoselective and effective glycosylation reactions. The sialic acid embedded octasaccharide moiety of the target compound was constructed by [4+4] convergent coupling. A tetrasaccharyl donor and acceptor that contained internal sialic acid residues were synthesized with an orthogonally protected N-Troc sialic acid donor as the key common synthetic unit, and they underwent highly stereoselective glycosidation. The resulting sialosides were subsequently transformed into reactive glycosyl acceptors. [4+4] coupling furnished the octasaccharide framework in 91 % yield as a single stereoisomer. Final conjugation of the octasaccharyl donor and glucosyl ceramide acceptor produced the protected target compound in high yield, which underwent global deprotection to successfully deliver ganglioside GP3.

Synthesis, Optical Properties, and Electronic Structures of Tetrakis(pentafluorophenyl)tetrathiaisophlorin Dioxide.

The synthesis, structure, optical and redox properties, and electronic structure of tetrakis(pentafluorophenyl)tetrathiaisophlorin dioxide (12) are reported. Oxidation of tetrakis(pentafluorophenyl)tetrathiaisophlorin (11) with dimethyldioxirane afforded the oxidized product, which was the tetrathiaisophlorin with two thiophene 1-oxide moieties (12). More significant nonplanarity and greater bond length alternation in 12 than those of 11 were observed by X-ray structural analysis. The absorption spectrum of 12 contains two bands at λ=348 and 276 nm, with a weak tail that extends to λ≈650 nm. Analysis of the magnetic circular dichroism spectrum of 12, based on Michl's 4N-perimeter model and molecular orbital calculations, indicate that the broad band at λ=348 nm appears to contain N2 and P2 bands, and 12 is classified as a 4nπ system, similar to 11. The nuclear-independent chemical shift values and (1) H NMR spectroscopy data indicate that 12 has more antiaromatic character than 11.

Photoinduced color change and photomechanical effect of naphthalene diimides bearing alkylamine moieties in the solid state.

Photoinduced color change of naphthalene diimides (NDIs) bearing alkylamine moieties has been observed in the solid state. The color change is attributed to the generation of a NDI radical-anion species, which may be formed through a photoinduced electron-transfer process from the alkylamine moiety to the NDI. The photosensitivity of NDIs is highly dependent on the structures of the alkylamine moieties. Crystallographic analysis, kinetic analysis, UV/Vis/NIR spectroscopic measurements, and analysis of the photoproduct suggested that a radical anion was formed through an irreversible process initiated by proton abstraction between an amine radical cation and the neutral amine moiety. The radical anions formed stacks including mixed-valence stacks and radical-anion stacks, as shown by the broad absorption bands in near-IR spectra. These photosensitive NDIs also showed crystal bending upon photoirradiation, which may be associated with a change in the intermolecular distance of the NDI stacks by the formation of monomeric radical anions, mixed-valence stacks, and radical-anion stacks.

Synthesis and electronic and photophysical properties of [2.2]- and [3.3]paracyclophane-based donor-donor'-acceptor triads.

Three types of the donor(D)-donor'(D')-acceptor(A) triads 1-6 with different D-A combinations, carbazole (Cz, D)-[n.n]PCP(D')-1,8-naphthalimide (NI, A) (1-3), 10H-phenothiazine (PTZ, D)-[n.n]PCP(D')-NI(A) (4, 5), and 10-methyl-10H-phenothiazine (Me-PTZ, D)-[2.2]PCP-2,1,3-benzothiadiazole (BTD, A) 6, were synthesized for the elucidation of their photophysical properties. The absorption spectra and electrochemical properties indicated that the chromophores (D, D', and A) do not interact with each other in the ground state. Cz-(CH2)3-[2.2]PCP-(CH2)3-NI 1 and Cz-(CH2)3-[3.3]PCP-(CH2)3-NI 2 show an exciplex emission between the PCP and NI moieties in cyclohexane and the intensity of the band is much higher in 2 than in 1, whereas Cz-(CH2)2-[2.2]PCP-(CH2)2-NI 3 does not show any exciplex emission in cyclohexane. These results indicated that the combination of [3.3]PCP and a trimethylene chain is preferable for the exciplex formation. PTZ-(CH2)3-[2.2]PCP-(CH2)3-NI 4 shows a broad band at 519 nm in cyclohexane, which is associated with the formation of the exterplex band among the NI, [2.2]PCP, and PTZ moieties, while PTZ-(CH2)3-[3.3]PCP-(CH2)3-NI 5 does not show the band. Me-PTZ-(CH2)2-[2.2]PCP-(CH2)2-BTD 6 shows a broad fluorescence band due to both the BTD and PTZ moieties in cyclohexane. In CH3CN, the fluorescence spectra of 1-6 suggest the presence of a photoinduced charge separation process. The study of the photoinduced charge separation process will be soon reported elsewhere.

Four-layered [3.3]meta-cyclo-phane with ethene-tetra-carbo-nitrile.

The title complex C42H48·2C6N4 {systematic name: hepta-cyclo[21.13.1.1(5,19).1(6,18).1(10,14).1(24,36).1(28,32)]do-tetra-conta-1(37),5(40),6(41),10(42),11,13,18,23,28,30,32(39),36(38)-dodeca-ene-ethene-tetra-carbo-nitrile (1/2)}, consisting of four-layered [3.3]meta-cyclo-phane (MCP) with two tetra-cyano-ethyl-ene (TCNE) mol-ecules, was grown from a mixture of MCP and TCNE in chloro-form solution. The four-layered [3.3]MCP has an S-shaped structure in which three [3.3]MCP moieties take syn-(chair-boat), anti-(chair-boat) and syn-(chair-boat) conformations. The two outer [3.3]MCP moieties with syn geometry contain benzene rings with a tilt of 32.95 (7)°. The central [3.3]MCP moiety has an anti geometry, in which the two benzene rings are oriented parallel to each other at a transannular distance of 2.31 Å. The TCNE mol-ecules are stacked on either side of the outer [3.3]MCP units at a distance of 3.19 Šon one side and 3.24 Šon the other, and showed 0.80:0.20 and 0.44:0.56 disorder, respectively.

Crystal structure of a four-layered [3.3](3,5)pyridino-phane.

The title compound, C40H46N2 {systematic name: 12,30-di-aza-hepta-cyclo[21.13.1.1(5,19).1(6,18).1(10,14).1(24,36).1(28,32)]do-tetra-conta-1(37),5(40),6(41),10(42),11,13,18,23,28,30,32(39),36(38)-dodeca-ene}, has syn-anti-syn geometry wherein the two outer [3.3]meta-cyclo-phane (MCP) moieties have a syn geometry, and contain the facing benzene and pyridine rings at dihedral angles of 26.26 (10) and 26.46 (10)°, respectively. The rings of the central [3.3]MCP unit are not parallel, but orientated at a slight angle of 2.66 (9)°. Three bridging methyl-ene groups are disordered over two sets of sites in a 0.60:0.40 ratio. In the crystal, the mol-ecules are linked by C-H⋯N inter-actions and inter-molecular C-H⋯π short contacts, generating a three-dimensional network.

Roto-Cyclization of 4-Bromopicene in On-Surface Synthesis.

Progress toward single-molecule electronics relies on a thorough understanding of the understanding of local physio-chemical processes and development of synthetic routines for controlled heterocoupling. We demonstrate a structurally unexpected ring closure process for a homo-coupled 4,4'-bipicenyl, realized in on-surface synthesis. An initial covalent C-C coupling of 4-bromopicene locks at lower temperatures the position and geometrically shields part of 4,4'-bipicenyl. Employing this effect of shielding might offer a path toward controlled stepwise hetero-coupling. At higher temperatures, a thermally activated three-dimensional rotation upon hydrogen dissociation, a dehydrogenative roto-cyclization, lifts the surface dimensionality restriction, and leads to the formation of a perylene. Thereby, the shielded molecular part becomes accessible again.

Acceleration patterns in the lower and upper trunk during running.

The purpose of the present study was to relate 3D acceleration patterns of the lower and upper trunk during running to running gait cycle, assess the validity of stride duration estimated from acceleration patterns, investigate speed-dependent changes in acceleration, and examine the test-retest reliability of these parameters. Thirteen healthy young men performed two running trials each on a treadmill and on land at three speeds (slow, preferred, and fast). The 3D accelerations were measured at the L3 spinous process (lower trunk) and the ensiform process (upper trunk) and synchronised with digital video data. The amplitude and root mean square of acceleration and stride duration were calculated and then analysed by three-way analysis of variance to test effects of running conditions, device location, and running speed. Bland-Altman analysis was used to evaluate the test-retest reliability. Marked changes in acceleration were observed in relation to foot strike during running. Stride durations calculated from the vertical accelerations were nearly equal to those estimated from video data. There were significant speed effects on all parameters, and the low test-retest reliability was confirmed in the anterior-posterior acceleration during treadmill running and the anterior-posterior acceleration at slow speed during treadmill and overground running.

Di-µ 2-acetato-1:2κ (2) O:O';2:3κ (2) O:O'-bis-{µ 2-4,4'-di-chloro-2,2'-[2,2-di-methyl-propane-1,3-diylbis(nitrilo-methanylyl-idene)]diphenolato}-1:2κ (6) O,N,N',O':O,O';2:3κ (6) O,O':O,N,N',O'-tri-cadmium.

In the title linear homo-trinuclear complex, [Cd3(C19H18Cl2N2O2)2(C2H3O2)2], the central Cd(II) atom is located on a centre of inversion and has a distorted octa-hedral coordination geometry formed by four O atoms from two bidentate/tetra-dentate Schiff base ligands and two O atoms from two bridging acetate ligands. The coordination geometry of the terminal Cd(II) atom is square-pyramidal with the tetra-dentate part of the ligand in the basal plane and one O atom from an acetate ligand occupying the apical site. The six-membered CdN2C3 ring adopts a chair conformation. The acetate-bridged Cd⋯Cd distance is 3.3071 (2) Å. The crystal structure is stabilized by C-H⋯O hydrogen bonds, which form C(7) chain motifs and give rise to a two-dimensional supra-molecular network structure lying parallel to the ab plane.