Control of Ligand-Binding Specificity Using Photocleavable Linkers in AFM Force Spectroscopy.

In recent decades, atomic force microscopy (AFM), in particular the force spectroscopy mode, has become a method of choice to study biomolecular interactions at the single-molecule level. However, grafting procedures as well as determining binding specificity remain challenging. We report here an innovative approach based on a photocleavable group that enables in situ release of the ligands bound to the AFM tip and thus allows direct assessment of the binding specificity. Applicable to a wide variety of molecules, the strategy presented here provides new opportunities to study specific interactions and deliver single molecules with high spatiotemporal resolution in a wide range of applications, including AFM-based cell biology.

Communication between N terminus and loop2 tunes Orai activation.

Ca2+ release-activated Ca2+ (CRAC) channels constitute the major Ca2+ entry pathway into the cell. They are fully reconstituted via intermembrane coupling of the Ca2+-selective Orai channel and the Ca2+-sensing protein STIM1. In addition to the Orai C terminus, the main coupling site for STIM1, the Orai N terminus is indispensable for Orai channel gating. Although the extended transmembrane Orai N-terminal region (Orai1 amino acids 73-91; Orai3 amino acids 48-65) is fully conserved in the Orai1 and Orai3 isoforms, Orai3 tolerates larger N-terminal truncations than Orai1 in retaining store-operated activation. In an attempt to uncover the reason for these isoform-specific structural requirements, we analyzed a series of Orai mutants and chimeras. We discovered that it was not the N termini, but the loop2 regions connecting TM2 and TM3 of Orai1 and Orai3 that featured distinct properties, which explained the different, isoform-specific behavior of Orai N-truncation mutants. Atomic force microscopy studies and MD simulations suggested that the remaining N-terminal portion in the non-functional Orai1 N-truncation mutants formed new, inhibitory interactions with the Orai1-loop2 regions, but not with Orai3-loop2. Such a loop2 swap restored activation of the N-truncation Orai1 mutants. To mimic interactions between the N terminus and loop2 in full-length Orai1 channels, we induced close proximity of the N terminus and loop2 via cysteine cross-linking, which actually caused significant inhibition of STIM1-mediated Orai currents. In aggregate, maintenance of Orai activation required not only the conserved N-terminal region but also permissive communication of the Orai N terminus and loop2 in an isoform-specific manner.

Mutual A domain interactions in the force sensing protein von Willebrand factor.

The von Willebrand factor (VWF) is a glycoprotein in the blood that plays a central role in hemostasis. Among other functions, VWF is responsible for platelet adhesion at sites of injury via its A1 domain. Its adjacent VWF domain A2 exposes a cleavage site under shear to degrade long VWF fibers in order to prevent thrombosis. Recently, it has been shown that VWF A1/A2 interactions inhibit the binding of platelets to VWF domain A1 in a force-dependent manner prior to A2 cleavage. However, whether and how this interaction also takes place in longer VWF fragments as well as the strength of this interaction in the light of typical elongation forces imposed by the shear flow of blood remained elusive. Here, we addressed these questions by using single molecule force spectroscopy (SMFS), Brownian dynamics (BD), and molecular dynamics (MD) simulations. Our SMFS measurements demonstrate that the A2 domain has the ability to bind not only to single A1 domains but also to VWF A1A2 fragments. SMFS experiments of a mutant [A2] domain, containing a disulfide bond which stabilizes the domain against unfolding, enhanced A1 binding. This observation suggests that the mutant adopts a more stable conformation for binding to A1. We found intermolecular A1/A2 interactions to be preferred over intramolecular A1/A2 interactions. Our data are also consistent with the existence of two cooperatively acting binding sites for A2 in the A1 domain. Our SMFS measurements revealed a slip-bond behavior for the A1/A2 interaction and their lifetimes were estimated for forces acting on VWF multimers at physiological shear rates using BD simulations. Complementary fitting of AFM rupture forces in the MD simulation range adequately reproduced the force response of the A1/A2 complex spanning a wide range of loading rates. In conclusion, we here characterized the auto-inhibitory mechanism of the intramolecular A1/A2 bond as a shear dependent safeguard of VWF, which prevents the interaction of VWF with platelets.

Detailed Evidence for an Unparalleled Interaction Mode between Calmodulin and Orai Proteins.

Calmodulin (CaM) binds most of its targets by wrapping around an amphipathic α-helix. The N-terminus of Orai proteins contains a conserved CaM-binding segment but the binding mechanism has been only partially characterized. Here, microscale thermophoresis (MST), surface plasmon resonance (SPR), and atomic force microscopy (AFM) were employed to study the binding equilibria, the kinetics, and the single-molecule interaction forces involved in the binding of CaM to the conserved helical segments of Orai1 and Orai3. The results consistently indicated stepwise binding of two separate target peptides to the two lobes of CaM. An unparalleled high affinity was found when two Orai peptides were dimerized or immobilized at high lateral density, thereby mimicking the close proximity of the N-termini in native Orai oligomers. The analogous experiments with smooth muscle myosin light chain kinase (smMLCK) showed only the expected 1:1 binding, confirming the validity of our methods.

Nanopharmacological Force Sensing to Reveal Allosteric Coupling in Transporter Binding Sites.

Controversy regarding the number and function of ligand binding sites in neurotransmitter/sodium symporters arose from conflicting data in crystal structures and molecular pharmacology. Here, we have designed novel tools for atomic force microscopy that directly measure the interaction forces between the serotonin transporter (SERT) and the S- and R-enantiomers of citalopram on the single molecule level. This approach is based on force spectroscopy, which allows for the extraction of dynamic information under physiological conditions thus inaccessible via X-ray crystallography. Two distinct populations of characteristic binding strengths of citalopram to SERT were revealed in Na(+)-containing buffer. In contrast, in Li(+) -containing buffer, SERT showed only low force interactions. Conversely, the vestibular mutant SERT-G402H merely displayed the high force population. These observations provide physical evidence for the existence of two binding sites in SERT when accessed in a physiological context. Competition experiments revealed that these two sites are allosterically coupled and exert reciprocal modulation.

Forces and dynamics of glucose and inhibitor binding to sodium glucose co-transporter SGLT1 studied by single molecule force spectroscopy.

Single molecule force spectroscopy was employed to investigate the dynamics of the sodium glucose co-transporter (SGLT1) upon substrate and inhibitor binding on the single molecule level. CHO cells stably expressing rbSGLT1 were probed by using atomic force microscopy tips carrying either thioglucose, 2'-aminoethyl ß-d-glucopyranoside, or aminophlorizin. Poly(ethylene glycol) (PEG) chains of different length and varying end groups were used as tether. Experiments were performed at 10, 25 and 37 °C to address different conformational states of SGLT1. Unbinding forces between ligands and SGLT1 were recorded at different loading rates by changing the retraction velocity, yielding binding probability, width of energy barrier of the binding pocket, and the kinetic off rate constant of the binding reaction. With increasing temperature, width of energy barrier and average life time increased for the interaction of SGLT1 with thioglucose (coupled via acrylamide to a long PEG) but decreased for aminophlorizin binding. The former indicates that in the membrane-bound SGLT1 the pathway to sugar translocation involves several steps with different temperature sensitivity. The latter suggests that also the aglucon binding sites for transport inhibitors have specific, temperature-sensitive conformations.

The extended transmembrane Orai1 N-terminal (ETON) region combines binding interface and gate for Orai1 activation by STIM1.

STIM1 and Orai1 represent the two molecular key components of the Ca(2+) release-activated Ca(2+) channels. Their activation involves STIM1 C terminus coupling to both the N terminus and the C terminus of Orai. Here we focused on the extended transmembrane Orai1 N-terminal (ETON, aa73-90) region, conserved among the Orai family forming an elongated helix of TM1 as recently shown by x-ray crystallography. To identify "hot spot" residues in the ETON binding interface for STIM1 interaction, numerous Orai1 constructs with N-terminal truncations or point mutations within the ETON region were generated. N-terminal truncations of the first four residues of the ETON region or beyond completely abolished STIM1-dependent Orai1 function. Loss of Orai1 function resulted from neither an impairment of plasma membrane targeting nor pore damage, but from a disruption of STIM1 interaction. In a complementary approach, we monitored STIM1-Orai interaction via Orai1 V102A by determining restored Ca(2+) selectivity as a consequence of STIM1 coupling. Orai1 N-terminal truncations that led to a loss of function consistently failed to restore Ca(2+) selectivity of Orai1 V102A in the presence of STIM1, demonstrating impairment of STIM1 binding. Hence, the major portion of the ETON region (aa76-90) is essential for STIM1 binding and Orai1 activation. Mutagenesis within the ETON region revealed several hydrophobic and basic hot spot residues that appear to control STIM1 coupling to Orai1 in a concerted manner. Moreover, we identified two basic residues, which protrude into the elongated pore to redound to Orai1 gating. We suggest that several hot spot residues in the ETON region contribute in aggregate to the binding of STIM1, which in turn is coupled to a conformational reorientation of the gate.

Investigating the binding behaviour of two avidin-based testosterone binders using molecular recognition force spectroscopy.

Molecular recognition force spectroscopy, a biosensing atomic force microscopy technique allows to characterise the dissociation of ligand-receptor complexes at the molecular level. Here, we used molecular recognition force spectroscopy to study the binding capability of recently developed testosterone binders. The two avidin-based proteins called sbAvd-1 and sbAvd-2 are expected to bind both testosterone and biotin but differ in their binding behaviour towards these ligands. To explore the ligand binding and dissociation energy landscape of these proteins, we tethered biotin or testosterone to the atomic force microscopy probe while the testosterone-binding protein was immobilized on the surface. Repeated formation and rupture of the ligand-receptor complex at different pulling velocities allowed determination of the loading rate dependence of the complex-rupturing force. In this way, we obtained the molecular dissociation rate (k(off)) and energy landscape distances (x(ß)) of the four possible complexes: sbAvd-1-biotin, sbAvd-1-testosterone, sbAvd-2-biotin and sbAvd-2-testosterone. It was found that the kinetic off-rates for both proteins and both ligands are similar. In contrast, the x(ß) values, as well as the probability of complex formations, varied considerably. In addition, competitive binding experiments with biotin and testosterone in solution differ significantly for the two testosterone-binding proteins, implying a decreased cross-reactivity of sbAvd-2. Unravelling the binding behaviour of the investigated testosterone-binding proteins is expected to improve their usability for possible sensing applications.

Switchavidin: reversible biotin-avidin-biotin bridges with high affinity and specificity.

Switchavidin is a chicken avidin mutant displaying reversible binding to biotin, an improved binding affinity toward conjugated biotin, and low nonspecific binding due to reduced surface charge. These properties make switchavidin an optimal tool in biosensor applications for the reversible immobilization of biotinylated proteins on biotinylated sensor surfaces. Furthermore, switchavidin opens novel possibilities for patterning, purification, and labeling.

Kinetics of bioconjugate nanoparticle label binding in a sandwich-type immunoassay.

Nanoparticle labels have enhanced the performance of diagnostic, screening, and other measurement applications and hold further promise for more sensitive, precise, and cost-effective assay technologies. Nevertheless, a clear view of the biomolecular interactions on the molecular level is missing. Controlling the ratio of molecular recognition over undesired nonspecific adhesion is the key to improve biosensing with nanoparticles. To improve this ratio with an aim to disallow nonspecific binding, a more detailed perspective into the kinetic differences between the cases is needed. We present the application of two novel methods to determine complex binding kinetics of bioconjugate nanoparticles, interferometry, and force spectroscopy. Force spectroscopy is an atomic force microscopy technique and optical interferometry is a direct method to monitor reaction kinetics in second-hour timescale, both having steadily increasing importance in nanomedicine. The combination is perfectly suited for this purpose, due to the high sensitivity to detect binding events and the ability to investigate biological samples under physiological conditions. We have attached a single biofunctionalized nanoparticle to the outer tip apex and studied the binding behavior of the nanoparticle in a sandwich-type immunoassay using dynamic force spectroscopy in millisecond timescale. Utilization of the two novel methods allowed characterization of binding kinetics in a time range spanning from 50 ms to 4 h. These experiments allowed detection and demonstration of differences between specific and nonspecific binding. Most importantly, nonspecific binding of a nanoparticle was reduced at contact times below 100 ms with the solid-phase surface.

Probing binding pocket of serotonin transporter by single molecular force spectroscopy on living cells.

The serotonin transporter (SERT) terminates neurotransmission by removing serotonin from the synaptic cleft. In addition, it is the site of action of antidepressants (which block the transporter) and of amphetamines (which induce substrate efflux). The interaction energies involved in binding of such compounds to the transporter are unknown. Here, we used atomic force microscopy (AFM) to probe single molecular interactions between the serotonin transporter and MFZ2-12 (a potent cocaine analog) in living CHOK1 cells. For the AFM measurements, MFZ2-12 was immobilized on AFM tips by using a heterobifunctional cross-linker. By varying the pulling velocity in force distance cycles drug-transporter complexes were ruptured at different force loadings allowing for mapping of the interaction energy landscape. We derived chemical rate constants from these recordings and compared them with those inferred from inhibition of transport and ligand binding: koff values were in good agreement with those derived from uptake experiments; in contrast, the kon values were scaled down when determined by AFM. Our observations generated new insights into the energy landscape of the interaction between SERT and inhibitors. They thus provide a useful framework for molecular dynamics simulations by exploring the range of forces and energies that operate during the binding reaction.

Mapping the nucleotide binding site of uncoupling protein 1 using atomic force microscopy.

A tight regulation of proton transport in the inner mitochondrial membrane is crucial for physiological processes such as ATP synthesis, heat production, or regulation of the reactive oxygen species as proposed for the uncoupling protein family members (UCP). Specific regulation of proton transport is thus becoming increasingly important in the therapy of obesity and inflammatory, neurodegenerative, and ischemic diseases. We and other research groups have shown previously that UCP1- and UCP2-mediated proton transport is inhibited by purine nucleotides. Several hypotheses have been proposed to explain the inhibitory effect of ATP, although structural details are still lacking. Moreover, the unresolved mystery is how UCP operates in vivo despite the permanent presence of high (millimolar) concentrations of ATP in mitochondria. Here we use the topographic and recognition (TREC) mode of an atomic force microscope to visualize UCP1 reconstituted into lipid bilayers and to analyze the ATP-protein interaction at a single molecule level. The comparison of recognition patterns obtained with anti-UCP1 antibody and ATP led to the conclusion that the ATP binding site can be accessed from both sides of the membrane. Using cantilever tips with different cross-linker lengths, we determined the location of the nucleotide binding site inside the membrane with 1 Å precision. Together with the recently published NMR structure of a UCP family member (Berardi et al. Nature, 2011, 476, 109-113), our data provide a valuable insight into the mechanism of the nucleotide binding and pave the way for new pharmacological approaches against the diseases mentioned above.

Reversible biofunctionalization of surfaces with a switchable mutant of avidin.

Label-free biosensors detect binding of prey molecules (″analytes″) to immobile bait molecules on the sensing surface. Numerous methods are available for immobilization of bait molecules. A convenient option is binding of biotinylated bait molecules to streptavidin-functionalized surfaces, or to biotinylated surfaces via biotin-avidin-biotin bridges. The goal of this study was to find a rapid method for reversible immobilization of biotinylated bait molecules on biotinylated sensor chips. The task was to establish a biotin-avidin-biotin bridge which was easily cleaved when desired, yet perfectly stable under a wide range of measurement conditions. The problem was solved with the avidin mutant M96H which contains extra histidine residues at the subunit-subunit interfaces. This mutant was bound to a mixed self-assembled monolayer (SAM) containing biotin residues on 20% of the oligo(ethylene glycol)-terminated SAM components. Various biotinylated bait molecules were bound on top of the immobilized avidin mutant. The biotin-avidin-biotin bridge was stable at pH ≥3, and it was insensitive to sodium dodecyl sulfate (SDS) at neutral pH. Only the combination of citric acid (2.5%, pH 2) and SDS (0.25%) caused instantaneous cleavage of the biotin-avidin-biotin bridge. As a consequence, the biotinylated bait molecules could be immobilized and removed as often as desired, the only limit being the time span for reproducible chip function when kept in buffer (2-3 weeks at 25 °C). As expected, the high isolectric pH (pI) of the avidin mutant caused nonspecific adsorption of proteins. This problem was solved by acetylation of avidin (to pI < 5), or by optimization of SAM formation and passivation with biotin-BSA and BSA.

Molecular determinants within N terminus of Orai3 protein that control channel activation and gating.

STIM1 and Orai represent the key components of Ca(2+) release-activated Ca(2+) channels. Activation of Orai channels requires coupling of the C terminus of STIM1 to the N and C termini of Orai. Although the latter appears to be central in the interaction with STIM1, the role of the N terminus and particularly of the conserved region close to the first transmembrane sequence is less well understood. Here, we investigated in detail the functional role of this conserved region in Orai3 by stepwise deletions. Molecular determinants were mapped for the two modes of Orai3 activation via STIM1 or 2-aminoethoxydiphenyl borate (2-APB) and for current gating characteristics. Increasing N-terminal truncations revealed a progressive decrease of the specific fast inactivation of Orai3 concomitant with diminished binding to calmodulin. STIM1-dependent activation of Orai3 was maintained as long as the second half of this conserved N-terminal domain was present. Further truncations abolished it, whereas Orai3 stimulation via 2-APB was partially retained. In aggregate, the N-terminal conserved region plays a multifaceted role in Orai3 current gating with distinct structural requirements for STIM1- and 2-APB-stimulated activation.

Nanoscale DNA tetrahedra improve biomolecular recognition on patterned surfaces.

The bottom-up approach of DNA nano-biotechnology can create biomaterials with defined properties relevant for a wide range of applications. This report describes nanoscale DNA tetrahedra that are beneficial to the field of biosensing and the targeted immobilization of biochemical receptors on substrate surfaces. The DNA nanostructures act as immobilization agents that are able to present individual molecules at a defined nanoscale distance to the solvent thereby improving biomolecular recognition of analytes. The tetrahedral display devices are self-assembled from four oligonucleotides. Three of the four tetrahedron vertices are equipped with disulfide groups to enable oriented binding to gold surfaces. The fourth vertex at the top of the bound tetrahedron presents the biomolecular receptor to the solvent. In assays testing the molecular accessibility via DNA hybridization and protein capturing, tetrahedron-tethered receptors outperformed conventional immobilization approaches with regard to specificity and amount of captured polypeptide by a factor of up to seven. The bottom-up strategy of creating DNA tetrahedrons is also compatible with the top-down route of nanopatterning of inorganic substrates, as demonstrated by the specific coating of micro- to nanoscale gold squares amid surrounding blank or poly(ethylene glycol)-passivated glass surfaces. DNA tetrahedra can create biofunctionalized surfaces of rationally designed properties that are of relevance in analytical chemistry, cell biology, and single-molecule biophysics.

Linking of sensor molecules with amino groups to amino-functionalized AFM tips.

The measuring tip of an atomic force microscope (AFM) can be upgraded to a specific biosensor by attaching one or a few biomolecules to the apex of the tip. The biofunctionalized tip is then used to map cognate target molecules on a sample surface or to study biophysical parameters of interaction with the target molecules. The functionality of tip-bound sensor molecules is greatly enhanced if they are linked via a thin, flexible polymer chain. In a typical scheme of tip functionalization, reactive groups are first generated on the tip surface, a bifunctional cross-linker is then attached with one of its two reactive ends, and finally the probe molecule of interest is coupled to the free end of the cross-linker. Unfortunately, the most popular functional group generated on the tip surface is the amino group, while at the same time, the only useful coupling functions of many biomolecules (such as antibodies) are also NH(2) groups. In the past, various tricks or detours were applied to minimize the undesired bivalent reaction of bifunctional linkers with adjacent NH(2) groups on the tip surface. In the present study, an uncompromising solution to this problem was found with the help of a new cross-linker ("acetal-PEG-NHS") which possesses one activated carboxyl group and one acetal-protected benzaldehyde function. The activated carboxyl ensures rapid unilateral attachment to the amino-functionalized tip, and only then is the terminal acetal group converted into the amino-reactive benzaldehyde function by mild treatment (1% citric acid, 1-10 min) which does not harm the AFM tip. As an exception, AFM tips with magnetic coating become demagnetized in 1% citric acid. This problem was solved by deprotecting the acetal group before coupling the PEG linker to the AFM tip. Bivalent binding of the corresponding linker ("aldehyde-PEG-NHS") to adjacent NH(2) groups on the tip was largely suppressed by high linker concentrations. In this way, magnetic AFM tips could be functionalized with an ethylene diamine derivative of ATP which showed specific interaction with mitochondrial uncoupling protein 1 (UCP1) that had been purified and reconstituted in a mica-supported planar lipid bilayer.

Multiple receptors involved in human rhinovirus attachment to live cells.

Minor group human rhinoviruses (HRVs) attach to members of the low-density lipoprotein receptor family and are internalized via receptor-mediated endocytosis. The attachment of HRV2 to the cell surface, the first step in infection, was characterized at the single-molecule level by atomic force spectroscopy. Sequential binding of multiple receptors was evident from recordings of characteristic quantized force spectra, which suggests that multiple receptors bound to the virus in a timely manner. Unbinding forces required to detach the virus from the cell membrane increased within a time frame of several hundred milliseconds. The number of receptors involved in virus binding was determined, and estimates for on-rate, off-rate, and equilibrium binding constant of the interaction between HRV2 and plasma membrane-anchored receptors were obtained.

Competitive binding assay for biotin and biotin derivatives, based on avidin and biotin-4-fluorescein.

Biotinylated molecules are extensively employed in bioanalytics and biotechnology. The currently available assays for quantification of biotin groups suffer from low sensitivity, low accuracy, or provide highly variable responses for different biotin derivatives. We developed a competitive binding assay in which avidin was pre-blocked to different extents by the biotinylated analyte and a constant amount of biotin-4-fluorescein (B4F) was added, resulting in strong quenching of the B4F. The assay was robust and the shape of the titration curve immediately revealed whether the data were reliable or perturbed by steric hindrance in case of large biotin derivatives. These advantages justified well the 10× higher sample consumption (~0.6nmol) compared to single point assays. The assay was applied to a representative set of small biotin derivatives and validated by cross-control with the well-established 2-anilinonaphthalene-6-sulfonic acid (2,6-ANS) binding assay. In comparison to the 2,6-ANS binding assay, the lower precision (±10%) was compensated by the 100-fold higher sensitivity and the deviations from the ANS assay were ≤5%. In comparison to the more sensitive biotin group assays, the new assay has the advantage of minimal bias for different biotin derivatives. In case of biotinylated DNA with 30 nucleotides, steric hindrance was found to reduce the accuracy of biotin group determination; this problem was overcome by partial digestion to n≤5 nucleotide residues with a 3'-exonuclease. The newly proposed biotin group assay offers a useful compromise in terms of sensitivity, precision, trueness, and robustness.

Detection of metal binding sites on functional S-layer nanoarrays using single molecule force spectroscopy.

Crystalline bacterial cell surface layers (S-layers) show the ability to recrystallize into highly regular pattern on solid supports. In this study, the genetically modified S-layer protein SbpA of Lysinibacillus sphaericus CCM 2177, carrying a hexa-histidine tag (His(6)-tag) at the C-terminus, was used to generate functionalized two-dimensional nanoarrays on a silicon surface. Atomic force microscopy (AFM) was applied to explore the topography and the functionality of the fused His(6)-tags. The accessibility of the His(6)-tags was demonstrated by in-situ anti-His-tag antibody binding to the functional S-layer array. The metal binding properties of the His(6)-tag was investigated by single molecule force microscopy. For this purpose, newly developed tris-NTA was tethered to the AFM tips via a flexible polyethylene glycol (PEG) linker. The functionalized tips showed specific interactions with S-layer containing His(6)-tags in the presence of nickel ions. Thus the His(6)-tag is located at the outer surface of the S-layer and can be used for stable but reversible attachment of functional tris-NTA derivatives.

Conformation of receptor adopted upon interaction with virus revealed by site-specific fluorescence quenchers and FRET analysis.

Human rhinovirus serotype 2 (HRV2) specifically binds to very-low-density lipoprotein receptor (VLDLR). Among the eight extracellular repeats of VLDLR, the third module (V3) has the highest affinity for the virus, and 12 copies of the genetically engineered concatamer V33333-His(6) were found to bind per virus particle. In the present study, ring formation of V33333-His(6) about each of the 12 5-fold symmetry axes on HRV2 was demonstrated by fluorescence resonance energy transfer (FRET) between donor and acceptor on N- and C-terminus, respectively. In particular, the N-terminus of V33333-His(6) was labeled with fluorescein, and the C-terminus with a new quencher which was bound to the His(6) tag with nanomolar affinity (K(d) approximately 10(-8) M) in the presence of 2 microM NiCl(2).