Archetypal Soft-Mode-Driven Antipolar Transition in Francisite Cu_{3}Bi(SeO_{3})_{2}O_{2}Cl.

Model materials are precious test cases for elementary theories and provide building blocks for the understanding of more complex cases. Here, we describe the lattice dynamics of the structural phase transition in francisite Cu_{3}Bi(SeO_{3})_{2}O_{2}Cl at 115 K and show that it provides a rare archetype of a transition driven by a soft antipolar phonon mode. In the high-symmetry phase at high temperatures, the soft mode is found at (0,0,0.5) at the Brillouin zone boundary and is measured by inelastic x-ray scattering and thermal diffuse scattering. In the low-symmetry phase, this soft-mode is folded back onto the center of the Brillouin zone as a result of the doubling of the unit cell, and appears as a fully symmetric mode that can be tracked by Raman spectroscopy. On both sides of the transition, the mode energy squared follows a linear behavior over a large temperature range. First-principles calculations reveal that, surprisingly, the flat phonon band calculated for the high-symmetry phase seems incompatible with the displacive character found experimentally. We discuss this unusual behavior in the context of an ideal Kittel model of an antiferroelectric transition.

Jahn-Teller, polarity, and insulator-to-metal transition in BiMnO3 at high pressure.

The interaction of coexisting structural instabilities in multiferroic materials gives rise to intriguing coupling phenomena and extraordinarily rich phase diagrams, both in bulk materials and strained thin films. Here we investigate the multiferroic BiMnO3 with its peculiar 6s2 electrons and four interacting mechanisms: electric polarity, octahedra tilts, magnetism, and cooperative Jahn-Teller distortion. We have probed structural transitions under high pressure by synchrotron x-ray diffraction and Raman spectroscopy up to 60 GPa. We show that BiMnO3 displays under pressure a rich sequence of five phases with a great variety of structures and properties, including a metallic phase above 53 GPa and, between 37 and 53 GPa, a strongly elongated monoclinic phase that allows ferroelectricity, which contradicts the traditional expectation that ferroelectricity vanishes under pressure. Between 7 and 37 GPa, the Pnma structure remains remarkably stable but shows a reduction of the Jahn-Teller distortion in a way that differs from the behavior observed in the archetypal orthorhombic Jahn-Teller distorted perovskite LaMnO3.

Structures and magnetism of the rare-earth orthochromite perovskite solid solution LaxSm1-xCrO3.

A new mixed rare-earth orthochromite series, LaxSm1-xCrO3, prepared through single-step hydrothermal synthesis is reported. Solid solutions (x = 0, 0.25, 0.5, 0.625, 0.75, 0.875, and 1.0) were prepared by the hydrothermal treatment of amorphous mixed-metal hydroxides at 370 °C for 48 h. Transmission electron microscopy (TEM) reveals the formation of highly crystalline particles with dendritic-like morphologies. Rietveld refinements against high-resolution powder X-ray diffraction (PXRD) data show that the distorted perovskite structures are described by the orthorhombic space group Pnma over the full composition range. Unit cell volumes and Cr-O-Cr bond angles decrease monotonically with increasing samarium content, consistent with the presence of the smaller lanthanide in the structure. Raman spectroscopy confirms the formation of solid solutions, the degree of their structural distortion. With the aid of shell-model calculations the complex mixing of Raman modes below 250 cm(-1) is clarified. Magnetometry as a function of temperature reveals the onset of low-temperature antiferromagnetic ordering of Cr(3+) spins with weak ferromagnetic component at Néel temperatures (TN) that scale linearly with unit cell volume and structural distortion. Coupling effects between Cr(3+) and Sm(3+) ions are examined with enhanced susceptibilities below TN due to polarization of Sm(3+) moments. At low temperatures the Cr(3+) sublattice is shown to undergo a second-order spin reorientation observed as a rapid decrease of susceptibility.

Emerging spin-phonon coupling through cross-talk of two magnetic sublattices.

Many material properties such as superconductivity, magnetoresistance or magnetoelectricity emerge from the non-linear interactions of spins and lattice/phonons. Hence, an in-depth understanding of spin-phonon coupling is at the heart of these properties. While most examples deal with one magnetic lattice only, the simultaneous presence of multiple magnetic orderings yield potentially unknown properties. We demonstrate a strong spin-phonon coupling in SmFeO3 that emerges from the interaction of both, iron and samarium spins. We probe this coupling as a remarkably large shift of phonon frequencies and the appearance of new phonons. The spin-phonon coupling is absent for the magnetic ordering of iron alone but emerges with the additional ordering of the samarium spins. Intriguingly, this ordering is not spontaneous but induced by the iron magnetism. Our findings show an emergent phenomenon from the non-linear interaction by multiple orders, which do not need to occur spontaneously. This allows for a conceptually different approach in the search for yet unknown properties.

Mesoporous TiO2 anatase films for enhanced photocatalytic activity under UV and visible light.

Mesoporous TiO2 films with enhanced photocatalytic activity in both UV and visible wavelength ranges were developed through a non-conventional atomic layer deposition (ALD) process at room temperature. Deposition at such a low temperature promotes the accumulation of by-products in the amorphous TiO2 films, caused by the incomplete hydrolysis of the TiCl4 precursor. The additional thermal annealing induces the fast recrystallisation of amorphous films, as well as an in situ acidic treatment of TiO2. The interplay between the deposition parameters, such as purge time, the amount of structural defects introduced and the enhancement of the photocatalytic properties from different mesoporous films clearly shows that our easily upscalable non-conventional ALD process is of great industrial interest for environmental remediation and other photocatalytic applications, such as hydrogen production.

Full Tensorial characterization of PZN-12%PT single crystal by resonant ultrasound spectroscopy.

An experimental setup based on the electrical excitation of a piezoelectric sample is proposed for resonant ultrasound spectroscopy measurements. The detection of the mechanical vibrations is performed by means of a laser interferometer. At the same time, the free vibrations of piezoelectric parallelepipeds of tetragonal and hexagonal symmetries are modeled taking into account the effect of the sample metalization. The paper presents the full elastic, piezoelectric and dielectric tensors of two PMN-34.5%PT ceramic and PZN-12%PT single crystal cubes.

Defect formation in multiwalled carbon nanotubes under low-energy He and Ne ion irradiation.

The mechanical, structural, electronic and magnetic properties of carbon nanotubes can be modified by electron or ion irradiation. In this work we used 25 keV He+ and Ne+ ion irradiation to study the influence of fluence and sample thickness on the irradiation-induced damage of multiwalled carbon nanotubes (MWCNTs). The irradiated areas have been characterised by correlative Raman spectroscopy and TEM imaging. In order to preclude the Raman contribution coming from the amorphous carbon support of typical TEM grids, a new methodology involving Raman inactive Au TEM grids was developed. The experimental results have been compared to SDTRIMSP simulations. Due to the small thickness of the MWCNTs, sputtering has been observed for the top and bottom side of the samples. Depending on thickness and ion species, the sputter yield is significantly higher for the bottom than the top side. For He+ and Ne+ irradiation, damage formation evolves differently, with a change in the trend of the ratio of D to G peak in the Raman spectra being observed for He+ but not for Ne+. This can be attributed to differences in stopping power and sputter behaviour.

Sodium enhances indium-gallium interdiffusion in copper indium gallium diselenide photovoltaic absorbers.

Copper indium gallium diselenide-based technology provides the most efficient solar energy conversion among all thin-film photovoltaic devices. This is possible due to engineered gallium depth gradients and alkali extrinsic doping. Sodium is well known to impede interdiffusion of indium and gallium in polycrystalline Cu(In,Ga)Se2 films, thus influencing the gallium depth distribution. Here, however, sodium is shown to have the opposite effect in monocrystalline gallium-free CuInSe2 grown on GaAs substrates. Gallium in-diffusion from the substrates is enhanced when sodium is incorporated into the film, leading to Cu(In,Ga)Se2 and Cu(In,Ga)3Se5 phase formation. These results show that sodium does not decrease per se indium and gallium interdiffusion. Instead, it is suggested that sodium promotes indium and gallium intragrain diffusion, while it hinders intergrain diffusion by segregating at grain boundaries. The deeper understanding of dopant-mediated atomic diffusion mechanisms should lead to more effective chemical and electrical passivation strategies, and more efficient solar cells.

Conductivity and Local Structure of LaNiO3 Thin Films.

A marked conductivity enhancement is reported in 6-11 unit cell LaNiO3 thin films. A maximal conductivity is also observed in ab initio calculations for films of the same thickness. In agreement with results from state of the art scanning transmission electron microscopy, the calculations also reveal a differentiated film structure comprising characteristic surface, interior, and heterointerface structures. Based on this observation, a three-element parallel conductor model is considered and leads to the conclusion that the conductivity enhancement for films of 6-11 unit cells, stems from the onset of intercompetition between the three local structures in the film depth.

Photovoltaics with Ferroelectrics: Current Status and Beyond.

Ferroelectrics carry a switchable spontaneous electric polarization. This polarization is usually coupled to strain, making ferroelectrics good piezoelectrics. When coupled to magnetism, they become so-called multiferroic systems, a field that has been widely investigated since 2003. While ferroelectrics are birefringent and non-linear optically transparent materials, the coupling of polarization with optical properties has received, since 2009, renewed attention, triggered notably by low-bandgap ferroelectrics suitable for sunlight spectrum absorption and original photovoltaic effects. Consequently, power conversion efficiencies up to 8.1% were recently achieved and values of 19.5% were predicted, making photoferroelectrics promising photovoltaic alternatives. This article aims at providing an up-to-date review on this emerging and rapidly progressing field by highlighting several important issues and parameters, such as the role of domain walls, ways to tune the bandgap, consequences arising from the polarization switchability, and the role of defects and contact electrodes, as well as the downscaling effects. Beyond photovoltaicity, other polarization-related processes are also described, like light-induced deformation (photostriction) or light-assisted chemical reaction (photostriction). It is hoped that this overview will encourage further avenues to be explored and challenged and, as a byproduct, will inspire other research communities in material science, e.g., so-called hybrid halide perovskites.

Ultrafast acousto-optic mode conversion in optically birefringent ferroelectrics.

The ability to generate efficient giga-terahertz coherent acoustic phonons with femtosecond laser makes acousto-optics a promising candidate for ultrafast light processing, which faces electronic device limits intrinsic to complementary metal oxide semiconductor technology. Modern acousto-optic devices, including optical mode conversion process between ordinary and extraordinary light waves (and vice versa), remain limited to the megahertz range. Here, using coherent acoustic waves generated at tens of gigahertz frequency by a femtosecond laser pulse, we reveal the mode conversion process and show its efficiency in ferroelectric materials such as BiFeO3 and LiNbO3. Further to the experimental evidence, we provide a complete theoretical support to this all-optical ultrafast mechanism mediated by acousto-optic interaction. By allowing the manipulation of light polarization with gigahertz coherent acoustic phonons, our results provide a novel route for the development of next-generation photonic-based devices and highlight new capabilities in using ferroelectrics in modern photonics.

Structural investigation of LaAlO3 up to 63 GPa.

We report a high-pressure synchrotron x-ray diffraction on a LaAlO(3) single crystal. The transition from rhombohedral to cubic at 14.8 GPa is confirmed by the loss of the superstructure reflections, whose intensity shows a linear pressure dependence, characteristic of a second-order transition. The crystal remains cubic up to 63 GPa, the highest pressure reached, which provides a confirmation over a very large pressure range of the general rules for the evolution of distortions of perovskites under pressure. We report the parameters of the Birch-Murnaghan equations of state in the low- and high-pressure phases and discuss the evolution of the bulk modulus.

Pressure-induced phase transition(s) in KMnF3 and the importance of the excess volume for phase transitions in perovskite structures.

We report a pressure-dependent investigation of KMnF(3) by x-ray diffraction up to 30 GPa. The results are discussed in the framework of Landau theory and in relation to the isostructural phase transition in SrTiO(3). The phase transition temperature near 186 K in KMnF(3) shifts to room temperature at a critical pressure of P(c) = 3.4 GPa; the pressure dependence of the transition point follows ΔP(c)/ΔT(c) = 0.0315 GPa K(-1). The transition becomes second order under high pressure, close to the tricritical point. The phase transition is determined by the rotation of MnF(6) octahedra with their simultaneous expansion along the rotation axis. The rotation angle was found to increase to 10.5° at 24 GPa. An additional anomaly was observed at higher pressure around 25 GPa, suggesting a further phase transition.