Importance of local and systemic factors in preventing implant displacement in the mandibular body: a scoping review of existing literature.

BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.

Periodontal phenotype: A review of historical and current classifications evaluating different methods and characteristics.

OBJECTIVE: To review the historical and current periodontal phenotype classifications evaluating methods and characteristics. Moreover, to identify and classify the methods based on periodontal phenotype components. OVERVIEW: Several gingival morphology studies have been frequently associated with different terms used causing confusion among the readers. In 2017, the World Workshop on the Classification of Periodontal and Peri-Implant Diseases and Conditions recommended to adopt the term "periodontal phenotype". This term comprises two terms, gingival phenotype (gingival thickness and keratinized tissue width) and bone morphotype (buccal bone plate thickness). Furthermore, gingival morphology has been categorized on "thin-scalloped", "thick-scalloped" and "thick-flat" considering the periodontal biotype. However, by definition, the term phenotype is preferred over biotype. Periodontal phenotype can be evaluated through clinical or radiographic assessments and may be divided into invasive/non-invasive (for gingival thickness), static/functional (for keratinized tissue width), and bi/tridimensional (for buccal bone plate thickness) methods. CONCLUSIONS: "Thin-scalloped," "thick-scalloped," and "thick-flat" periodontal biotypes were identified. These three periodontal biotypes have been considered in the World Workshop but the term periodontal phenotype is recommended. Periodontal phenotype is the combination of the gingival phenotype and the bone morphotype. There are specific methods for periodontal phenotype evaluation. CLINICAL SIGNIFICANCE: The term periodontal phenotype is currently recommended for future investigations about gingival phenotype and bone morphotype. "Thin-scalloped," "thick-scalloped," and "thick-flat" periodontal phenotypes can be evaluated through specific methods for gingival thickness, keratinized tissue width, and buccal bone plate thickness evaluation.

Techniques for retrievability and for registering screw access holes in cement-retained implant-supported prostheses: A scoping review of the literature.

STATEMENT OF PROBLEM: After implant rehabilitation, clinicians may need to remove a restoration because of technical and biological complications. For cement-retained implant-supported prostheses (ISPs), the retrievability process may damage the components of the prosthesis, the intaglio surface of the implant, or the abutment screw. To avoid that, the screw access hole (SAH) of the dental implant abutment (DIA) should be registered. Although several clinical reports and dental techniques have been proposed, a review of existing techniques is lacking. PURPOSE: The purpose of this scoping review was to evaluate the different techniques described for retrievability and for registering the SAH of cement-retained ISPs. MATERIAL AND METHODS: An electronic search of English language dental literature in the PubMed, Scopus, Google Scholar, and SciELO databases was conducted from 1980 to December 2017 with appropriate keywords and phrases. A hand search of relevant dental journals was also completed, and exclusion criteria were applied after full-text evaluation. RESULTS: The electronic and hand search revealed 325 articles. However, 252 publications were discarded after duplicates were removed. After reading the title and abstracts, 15 studies were excluded, and the full text of 64 publications was screened for inclusion and exclusion criteria. Forty studies were selected and included for final evaluation. The evaluation revealed 6 techniques for retrievability and 9 techniques for registering the position of the SAH, divided into 2-dimensional (2D) and 3-dimensional (3D) techniques. CONCLUSIONS: Cement-retained ISPs can be effectively retrieved by using interim cements and possibly by using a combined cement- and screw-retained design. Vacuum guides with guiding sleeves and computer-aided design and computer-aided manufacturing (CAD-CAM) guide templates are possible effective 3D techniques for registering the screw access channel (SAC) location and angulation.

Bucco alveolar bone thickness of mandibular impacted third molars with different inclinations: a CBCT study.

PURPOSE: To compare the buccal alveolar bone thickness of mesioangulated mandibular impacted third molars (MITM) with buccal versus lingual inclination using cone-beam computed tomography (CBCT). METHODS: This retrospective cross-sectional study evaluated 69 individuals (39 women and 30 men) who presented a total of 101 mesioangulated MITM according to the Winter classification and in B position according to the Pell and Gregory classification. The average age was 22.99 ± 3.94 years. The superior, medial and inferior alveolar thickness regarding buccal (n = 44) or lingual (n = 57) mandibular third molar inclination were measured. T test or Mann-Whitney U test and finally, a multiple linear regression were applied (p < 0.05). RESULTS: The buccal alveolar bone thickness of mesioangulated mandibular impacted third molars was significantly greater in the group with lingual inclination compared to the group with buccal inclination, in the superior region (6.21 ± 3.27 vs. 4.85 ± 3.06; p = 0.036). The lingual inclination significantly influenced the buccal alveolar bone thickness in the middle region (p = 0.011). CONCLUSIONS: The mesioangulated MITM in B position with lingual inclination have a greater thickness of the superior and medial buccal alveolar bone than the MITM with buccal inclination. These results should be considered during MITM diagnosis and surgical planning.

The association between orthodontic treatment and third molar position, inferior alveolar nerve involvement, and prediction of wisdom tooth eruption.

PURPOSE: The present study aims to compare mandibular third molar position in relation to the mandibular ramus, mandibular third molar angulation, potential impaction and nerve involvement in orthodontic treated versus untreated subjects. METHODS: The sample consisted of 300 panoramic radiographs 119 males (mean age 16.9 years); 181 females (mean age 16.8 years), contrasting an orthodontically treated (n = 150) to an untreated group (n = 150). Only patients with a full mandibular dentition were included. Pell and Gregory (Dent Digest 39: 330-338, 1933), Winter (Principles of exodontia as applied to the impacted third molars, 1926) and Félez-Gutierrez modified by Gomes (Study of nerve lesion following mandibular third molar surgery, 2011) classifications were used. Radiological information was used to predict eruption. Data was analyzed using frequency analysis and Chi-square testing. RESULTS: 220 lower wisdom teeth (73.3%) were impacted in the treated group, opposed to 236 impacted lower wisdom teeth (78.7%) in the untreated group. A close relation with the mandibular nerve was observed 125 times (41.7%) in the treated group, opposed to an incidence of 112 (37.3%) in the untreated group. The differences were not statistically significant. A partial eruption was predicted for 153 (51%) lower wisdom teeth in the treated group, opposed to 106 (35%) in the untreated group and an impossible eruption in 67 (22%) in the treated group, opposed to 130 (43%). These differences were statistically significant (p < 0.05). CONCLUSIONS: The significant outcomes indicate that orthodontically treated patients may develop a higher likeliness to partially erupted third molars, which potentially leads to local clinical morbidities, such as pericoronitis and caries on adjacent teeth. In this context, it may support third molar extractions at an earlier stage in particular cases.

Can preoperative imaging help to predict postoperative outcome after wisdom tooth removal? A randomized controlled trial using panoramic radiography versus cone-beam CT.

OBJECTIVES: The primary objective of the study was to compare the postoperative complications following surgical removal of impacted third molars using panoramic radiography (PAN) images- and cone-beam computed tomography (CBCT)-based surgeries for "moderate-risk" cases of impacted third mandibular molars. The secondary objective was to compare the reliability of CBCT with that of PAN in preoperative radiographic determination of the position of the third molar, number of roots, and apical divergence. MATERIALS AND METHODS: A randomized controlled multicenter trial was conducted to compare the surgical complications of PAN- and CBCT-based surgeries of impacted third molars. The sample consisted of impacted third molars from 256 patients with a close relation to the inferior alveolar nerve (IAN). Exclusion criteria were "no risk" and "high risk" of damage to the IAN based on the assessment of the panoramic radiograph. Patients were divided into two groups: the CBCT group (n = 126) and the PAN group (n = 130). The incidences of IAN sensory disturbance and other postoperative complications were recorded for each group at 7 days after surgery. Statistical analysis (kappa values) was used to compare the diagnoses of five trained dentomaxillofacial radiologists and to relate radiologic diagnoses to perioperative findings. Logistic regression was used to determine whether the imaging modality influenced occurrence of postoperative complications. RESULTS: Two extractions (1.5%) in the CBCT group and five (3.8%) in the PAN group resulted in IAN sensory disturbance (p = 0.45). Logistic regression models did not show that CBCT modality decreased postoperative complications following surgical removal of impacted third molars. Yet, CBCT revealed the number of roots and apical divergence of the roots more reliably than panoramic radiographs. CONCLUSIONS: CBCT was not better than panoramic radiography in predicting postoperative complications for moderate-risk cases of impacted third mandibular molars. Nonetheless, a CBCT buccolingual view can accurately confirm the number of roots and root morphology of the third molar better than PAN. CLINICAL RELEVANCE: For management of postoperative complications for moderate-risk cases of impacted mandibular third molars, careful preoperative radiographic planning followed by an atraumatic surgical approach seems to be valuable, irrespective of the 2D or 3D nature of the preoperative images.

Association of -1082 interleukin-10 gene polymorphism in Peruvian adults with chronic periodontitis.

OBJECTIVES: The aim of this study was to assess association of the -1082 IL-10 gene polymorphism with chronic periodontitis CP in a Peruvian population. STUDY DESIGN: Samples of venous blood and DNA were obtained from 106 Peruvian subjects: a) 53 periodontally healthy; and b) 53 with CP. The association of the -1082 IL-10 promoter sequences was assessed by Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Student's t test were used to assess the clinical parameters, as well as the χ2 test and the odds ratio (OR), with 95% confidence intervals (CI) used performed for estimates regarding genotype and allele frequencies. RESULTS: There were statistically significant differences between groups regarding the mean bleeding on probing, mean attachment level and mean probing depth (p < 0.00001) indicating that the matching based on the evaluated groups was adequate. The χ2 test found a statistically significant imbalance of genotypes between groups (p = 0.0172). The prevalence of CP was significantly higher in subjects harboring at least one A allele at position -1082 (AA and GA genotypes) in comparison to patients with the GG genotype (OR = 2.96; CI: 0.52; 5.41; p = 0.0099). Equally, subjects with the AA genotype were significantly associated to a diagnosis of CP (OR = 2.71; CI: 0.38; 5.04; p = 0.0231). On the other hand, subjects presenting a healthy periodontal status presented at least one G allele in comparison with the AA genotype (OR = 0.37; CI: 0.05, 0.69; p = 0.0231). For subjects with the GG genotype, the same positive association was observed (OR = 0.34; CI: 0.06, 0.62; p = 0.0099). There were no significant differences between groups amongst subjects with the GA genotype (OR = 1.19; CI: 0.22, 2.16; p = 0.6774). CONCLUSIONS: Within the limits of this study, IL-10 gene polymorphism at position -1082 does not appear to be associated to CP. Conversely, subjects with AA genotype seem to be at an increased risk of developing CP.

Periodontitis and Neuropathic Diseases: A Literature Review.

Aim: This narrative review aimed at identifying the existing scientific literature investigating periodontitis and neuropathic diseases. Materials and Methods: A search of the literature published between 2000 and 2022 was carried out in the electronic databases of Scopus and PubMed. Studies in which the eligible articles were mainly published in English were included. Descriptive correlational studies, case-control studies, comparative studies, and cohort studies were also included. The following main keywords were used: "Neuropathic diseases," "Periodontitis," "Alzheimer's disease," and "Porphyromonas gingivalis." Results: This narrative review found that cognitively impaired persons with severe periodontitis had a higher prevalence and incidence of periodontal diseases than the rest of the population. A significant positive correlation of salivary interleukin (IL)-1beta and immediate recall scores involved in cognition was also evident. It indicates that the most investigated parameter was whether there is any common link between periodontal disease and neurodegeneration. No randomized controlled clinical studies were found in the current literature review. Conclusions: Based on the literature reviewed, there is currently no strong scientific evidence to support or discourage the cause-effect relationship of periodontal diseases and neurodegenerative diseases.

Sexual dimorphism of maxillary sinuses in adult population using cone-beam computed tomography. A pilot study.

Objective: This study aims to evaluate the sexual dimorphism of maxillary sinuses (MS) using cone-beam computed tomography (CBCT). Method: A total of 80 CBCT scans were taken from Peruvian patients aged between 20 and 70 years-old. The dimensions (length, width, and height) of the MS were measured and evaluated. The data were analyzed using the Mann-Whitney U test with a significance level of p < 0.05. Results: The left MS was wider than the right MS. Meanwhile, the right MS was longer than the left MS. In addition, the height of the right and left MS was significantly different in males and females, with p-value of 0.003 and 0.044 respectively. Bigger dimension of height of the MS was found in patients aged between 30 and 39 as well as patients aged between 40 and 49, whereas smaller dimension of height of the MS was found in patients aged between 60 and 70. Furthermore, the height of the right MS was significantly different in dentate and edentulous patients, with p-value of 0.033 and 0.043 respectively. The height of the right MS was predicted at 65 % in males and 70 % in females (p = 0.002). Conclusion: The morphometry of the maxillary sinuses can be used for predicting sexual dimorphism.

Effect of Bariatric Surgery on Gut Microbiota: A Scientometric Analysis.

Objective: To perform a bibliometric analysis of the scientific production related to intestinal microbiota and bariatric surgery between January 2016 and December 2022. Materials and Methods: A bibliographic search was performed in the Scopus database to identify published papers. Free and controlled terms (MeSH and Emtree) were used. The information collected was analyzed with SciVal. Results: A total of 518 published papers were included in the analysis. Carel Le Roux was the author with the highest scientific production; however, Edi Prifti had the highest impact. French National Institute of Health and Medical Research (Institut national de la santé et de la recherche médicale) was the institution with the highest number of published articles. Six of the 10 institutions with the highest production were in France, yet the United States had the highest volume of scientific production in this research topic. Most papers were published in first quartile journals. Articles with international collaboration had the highest impact. There is a sustained increase in the number of publications since 2019. Conclusions: The study found that the vast majority of research on gut microbiota changes following bariatric surgery are conducted in the United States and European countries. In addition, the sustained increase in production coupled with the articles being published in high-quality journals and having good citation impact are indictors of the current interest in this research field.

Osseointegration of Dental Implants in Patients with Congenital and Degenerative Bone Disorders: A Literature Review.

Aims and Objectives: The aim of this study was to describe the mechanism of dental implants osseointegration in patients with congenital and degenerative genetic bone disorders. Materials and Methods: A PubMed and Scopus documents search was carried out between November 2021 in the, using words such as "osseointegration," "degenerative disease," "congenital disease," and "dental implants." Results: The thirteen articles selected dealt with dental implants osseointegration in patients with congenital and degenerative bone disorders. The influence and repercussion of these diseases on the bone system, as well as the osseointegration process were described from healing to bone remodeling. In addition, certain articles described some considerations to improve the osseointegration process in patients suffering from these types of conditions. Conclusions: Within the limitations of this literature review we can conclude that osseointegration in patients with ectodermal dysplasia and osteoporosis could be achieved. However, the planning process for dental implant placement in these patients should be more meticulous and individualized considering the degree of tissue involvement as well as the patient's age and skeletal development compared to systemically healthy patients.

A Bibliometric Analysis of the International Dental Journal (2011-2020).

INTRODUCTION: Bibliometrics is an area that allows for the evaluation of scientific publications by means of different indicators. The aim of this research was to perform a bibliometric study of the scientific production of the International Dental Journal (IDJ) between 2011 and 2020. METHODS: All publications of the journal between 2011 and 2020 extracted from the Scopus database were included. The number of publications, most productive institutions, type of collaboration, most productive countries, most cited articles, and authors with the highest academic production were used as bibliographic indicators. It was exported to the SciVal tool for analysis. RESULTS: A total of 630 documents published in IDJ by 1947 authors were collected, with a total of 7212 citations (11.4 citations per document). The United States was the country with the highest number of documents (100). The University of Adelaide (Australia) was the institution with the highest scientific production (16 publications), whilst the institution with the highest impact was the Universidade de São Paulo (Brazil), with 12.2 citations per paper. Marc Luiz Tennant was the author with the highest number of published manuscripts (13). Finally, most of the publications had international collaboration (146 documents). CONCLUSIONS: IDJ is a high-quality journal and, in the dental field, it has a high impact worldwide, which allows for a greater number of citations of its articles and placing it in the forefront of future research.

Applications and Perspectives of Artificial Intelligence, Machine Learning and "Dentronics" in Dentistry: A Literature Review.

Objective: The aim of this study was to describe artificial intelligence, machine learning, and "Dentronics" applications and perspectives in dentistry. Materials and Methods: A literature review was carried out to identify the applications of artificial intelligence in the field of dentistry. A specialized search for information was carried out in three databases such as Scopus, PubMed, and Web of Science. Manuscripts published from January 1988 to November 2021 were analyzed. Articles were included without any restriction by language or country. Results: Scopus, PubMed, and Web of Science were found to have 215, 1023, and 98 registered manuscripts, respectively. Duplicates (191 manuscripts) were eliminated. Finally, 4 letters, 12 editorials, 5 books, 1 erratum, 54 conference papers, 3 conference reviews, and 222 reviews were excluded. Conclusions: Artificial intelligence has revolutionized prediction, diagnosis, and therapeutic management in modern dentistry. Finally, artificial intelligence is a potential complement to managing future data in this area.

Trends, collaboration, and visibility of global scientific production on birth complications in pregnant women with tuberculosis: A scientometric study.

Background: The increase in the number of pregnant women with tuberculosis is an important factor that should be analyzed at present. Thus, It is important to evaluate the bibliometric characteristics of the scientific production indexed in Scopus on complications of pregnancy and childbirth in pregnant women with tuberculosis. Methods: A cross-sectional bibliometric study was carried out analyzing the publications of journals indexed in Scopus between January 2016 and May 2022. A search strategy was developed using MESH terms and Boolean operators. The SciVal program (Elsevier) was used for bibliometric analysis of the information in the documents. Results: Of the 287 publications analyzed, 13 were in the International Journal of Tuberculosis and Lung Disease and BJOG: An International Journal of Obstetrics and Gynaecology presented 11.9 citations per publication. Gupta Amita, from the United States, presented the most published papers; however, Myer London, from South Africa, had the highest impact, with 17.8 citations per publication. Johns Hopkins University was the institution with the highest number of publications (34). 51.9% of the publications were in journals in the Q1 quartile while 41.8% were international collaborations. Conclusions: In each year analyzed, scientific production was similar, with the highest proportion of publications in journals located in the Q1 and Q2 quartile. The institutions with the highest production were from the United States and South Africa. Therefore, there is a need to promote collaborative production in countries with greater presence of this disease.

Resonance Frequency Analysis Mapping During Implant Healing Using a Nanostructured Hydroxyapatite Surface.

Aim: Stability measured by resonance frequency analysis (RFA) is an important factor to be considered in the success of dental implant treatments, which can be evaluated from the implant stability quotient (ISQ). The aim of the present case series was to map the RFA during healing of implants with nanostructured hydroxyapatite surface to describe the behavior of ISQ values related to individual factors. Materials and Methods: Twenty-three implants were placed in eight patients by conventional surgical protocol, and ISQ values were monitored from the day of implant placement until week 20. To obtain the ISQ values, an Osstell device was used and the placed implants were grouped in proportional amounts to describe the ISQ behavior considering the length (≤10 or >10 mm), the diameter (3.5 or 4.3 mm), the insertion torque (<40 N-cm or ≥40 N-cm), and the placement area (maxilla or mandible). Results: All the implants assessed decreased their values in the first 3 weeks after placement. Subsequently, the ISQ values increased by amounts similar to those obtained at the time of the placement and even more. Implants with length >10 mm, diameter 4.3 mm, and insertion torque ≥40 N-cm showed the highest ISQ values. Conclusions: A decrease in the ISQ values of dental implants with nanostructured hydroxyapatite surface was evidenced between weeks 2 and 3 considering length, diameter, insertion torque, and maxillary or mandibular placement site.

Inferior alveolar nerve sensory disturbance after impacted mandibular third molar evaluation using cone beam computed tomography and panoramic radiography: a pilot study.

PURPOSE: To measure sensory disturbances of the inferior alveolar nerve (IAN) after removal of impacted mandibular third molars using cone beam computed tomography (CBCT) and dental panoramic radiography (PAN) for preoperative assessment in a randomized controlled trial and to measure the efficacy of the observers' prediction of IAN exposure at surgery based on CBCT compared with PAN. MATERIALS AND METHODS: The sample consisted of 86 impacted third molars (from 79 consecutive patients) in close relation to the IAN as determined by PAN and judged as showing a "moderate" risk of IAN damage. Cases presenting with no close relation between the IAN and roots and extremely risky cases with an obvious interrelation were excluded. Potential neurosensory disturbances of the lip and chin were assessed before surgery and during the postoperative recall by measuring the function of the IAN with the light-touch sensation method. RESULTS: Postoperative sensory disturbances occurred in 1 patient in the CBCT group and 1 patient in the PAN group. The light-touch sensation test showed no significant differences at the lip (P = .10) and chin (P = .17) levels for CBCT- versus PAN-based surgery. Significant differences in making a correct diagnosis of neurovascular bundle exposure at the extraction of impacted teeth were found between the 2 modalities (P = .029). CONCLUSIONS: Within the limits of the present pilot study, CBCT was not superior to PAN in predicting postoperative sensory disturbances but was superior in predicting IAN exposure during third molar removal in cases judged as having "moderate" risk.

Bibliometric Analysis of the Current Landscape of Global Scientific Production on the Development of Vaccines against Dental Caries.

Objective: To perform a bibliometric analysis of the scientific research on the development of vaccines against dental caries. Methods: An extraction of the scientific production published on the development of vaccines against dental caries between 2011 and 2020 was carried out from the Scopus database. Microsoft Excel was used for the elaboration of tables and SciVal for the bibliometric analysis of the data, which were divided into indicators of production, impact, and collaboration. Finally, VOSviewer was used for co-occurrence analysis of keywords and collaborative networks. Results: 106 studies were retrieved from the Scopus database, which were conducted on the development of dental caries vaccines within the years 2011-2020. Wuhan University, in China, was the university with the highest scientific production on the subject, with 4 publications. Regarding the most productive journals, the first place was occupied by the Journal of Dental Research with 7 publications. Regarding the most productive journals, the first place was occupied by the Journal of Dental Research with 7 publications. The highest percentage of the documents analyzed was in quartile 1 journals and in the national collaboration pattern. Conclusion: Most of the manuscripts regarding the development of vaccines against dental caries were published in China and in Q1 quartile journals. In addition, Yan Huimin, Yang Jingyi, Zhou Dihan, Yang Yi, Li Yuhong and Fan Mingwen were found to top the list of most productive authors. The Journal of Dental Research was also identified as the most productive and cited journal.

A Scientometric Analysis of Scholarly Output on COVID-19 and Dentistry.

INTRODUCTION: Scientometrics is a discipline that allows the analysis of the characteristics of publications in each field of knowledge using different indicators. The aim of this research was to analyse world scientific publication as to COVID-19 related to dentistry. METHODS: A specialised search strategy was used to obtain all the documents published in journals indexed in the Scopus database between December 2019 and February 2022. The study variables were exported and analysed in SciVal (Elsevier). RESULTS: In all, 2071 documents were retrieved; of those, Oral Diseases has the highest impact with an average of 12.3 citations per publication, and the British Medical Journal was identified as the journal with the highest scientific output (107). India (292) and the UK (287) were the countries with the most published papers. The Universidade de São Paulo in Brazil was the institution with the highest number of published papers (61) and with the highest impact. CONCLUSIONS: During the pandemic, scientific publications on dentistry and COVID-19 have been increasing considerably. International collaboration has the highest percentage of publications whilst India and the UK are the countries with the highest scientific production.

A 10-Year Scientometrics Analysis of Brain Tumors Treated with Gamma Knife Radiosurgery: Visualization, Characteristics, and Scientific Trends.

Objective: To evaluate the scientometrics characteristics of the scientific production on the treatment of brain tumors with gamma knife radiosurgery in Scopus. Methods: The Scopus database (Elsevier) was used to collect all relevant studies for this bibliometric analysis. Data was obtained as a .csv file; it was downloaded from Scopus and was exported by SciVal to Microsoft Excel for a presentation using tables for more detailed analysis. The citations and the number of papers for the most productive institutions, authors, countries, and journals publishing scientific papers were analyzed on the use of gamma knife radiosurgery for brain tumors. Results: 458 metadata were obtained from scientific publications, on which inclusion and exclusion criteria were applied, leaving 248 studies. The maximum peak of publications was 2018 with 31 publications, and the minimum peak was 2015 with 18. The most related subtopics were neurology, surgery, and oncology, and most of the retrieved papers had only institutional collaboration. As for more productive journals, Journal of Neurosurgery is first with 23 publications; within the countries with the most scientific publications, we have the United States, Japan, and China. With the United States being the country with the highest number of productions, University of Texas MD Anderson Cancer Center was the main university with the highest scientific production and Sheehan and Trifiletti and American authors dominate the list with the highest number of documents. Conclusion: Scientific production regarding gamma knife surgery and brain tumors has been increasing during the last 10 years, with a high incidence during 2018, and the highest number of published articles was in the first quartile. Likewise, the United States is the country with the most publications, authors, and universities on the subject. Greater efforts are still lacking from all countries in the world to reach the quantity and quality of production of the United States.

Scholarly Output in Peruvian National Dentistry according to Gender Disparity: A 10-Year Bibliometric Study.

Objective: To evaluate Peruvian scientific publications in dentistry according to sex disparity (2011-2020). Methods: This was a retrospective bibliometric study. The unit of analysis was made up of Peruvian dentistry publications indexed in the Scopus database during the last 10 years. Records with metadata (410) corresponding to the period 2011-2020 were downloaded and standardized and refined by analyzing the metadata. The search strategy was developed based on the individual profiles of each Peruvian institution that has a dental school or college. It was evaluated according to the AF-ID of each institution in the Scopus database. In addition, the information provided by the Scopus SciVal tool was used. Finally, publications, impact, and collaboration indicators were used, such as total number per document, per author, average of citations, h-index, collaboration rate, number of institutions, the Source Normalized Impact per Paper indicator, the CiteScore, and the Scopus Field-Weighted Citation Impact. Results: The greatest increase was evident in 2018, with 2019 and 2020 being the maximum peak of scientific publication growth. However, sustained growth has not been evidenced in relation to the female sex. The analysis of coauthorship by the authors revealed four large clusters, of which the first three were represented by male researchers, such as Arriola-Guillen L., Mayta-Tovalino F., and Mendoza-Azpur G., and one by a female, Guerrero María E. Evaluating the national scientific publication in dentistry according to the CiteScore, it was found that most of the publications (145) from Peru were published in Q4 journals, although 90 manuscripts were published in Q1 journals. Conclusions: The Peruvian national dental publication in the last 10 years was mainly supported by male dentists, which invites us to reflect on the need to equalize opportunities so that female researchers can also reduce these gaps.