Molecularly defined and spatially resolved cell atlas of the whole mouse brain.

In mammalian brains, millions to billions of cells form complex interaction networks to enable a wide range of functions. The enormous diversity and intricate organization of cells have impeded our understanding of the molecular and cellular basis of brain function. Recent advances in spatially resolved single-cell transcriptomics have enabled systematic mapping of the spatial organization of molecularly defined cell types in complex tissues1-3, including several brain regions (for example, refs. 1-11). However, a comprehensive cell atlas of the whole brain is still missing. Here we imaged a panel of more than 1,100 genes in approximately 10 million cells across the entire adult mouse brains using multiplexed error-robust fluorescence in situ hybridization12 and performed spatially resolved, single-cell expression profiling at the whole-transcriptome scale by integrating multiplexed error-robust fluorescence in situ hybridization and single-cell RNA sequencing data. Using this approach, we generated a comprehensive cell atlas of more than 5,000 transcriptionally distinct cell clusters, belonging to more than 300 major cell types, in the whole mouse brain with high molecular and spatial resolution. Registration of this atlas to the mouse brain common coordinate framework allowed systematic quantifications of the cell-type composition and organization in individual brain regions. We further identified spatial modules characterized by distinct cell-type compositions and spatial gradients featuring gradual changes of cells. Finally, this high-resolution spatial map of cells, each with a transcriptome-wide expression profile, allowed us to infer cell-type-specific interactions between hundreds of cell-type pairs and predict molecular (ligand-receptor) basis and functional implications of these cell-cell interactions. These results provide rich insights into the molecular and cellular architecture of the brain and a foundation for functional investigations of neural circuits and their dysfunction in health and disease.

The Giardia ventrolateral flange is a lamellar membrane protrusion that supports attachment.

Attachment to the intestinal epithelium is critical to the lifestyle of the ubiquitous parasite Giardia lamblia. The ventrolateral flange is a sheet-like membrane protrusion at the interface between parasites and attached surfaces. This structure has been implicated in attachment, but its role has been poorly defined. Here, we identified a novel actin associated protein with putative WH2-like actin binding domains we named Flangin. Flangin complexes with Giardia actin (GlActin) and is enriched in the ventrolateral flange making it a valuable marker for studying the flanges' role in Giardia biology. Live imaging revealed that the flange grows to around 1 µm in width after cytokinesis, then remains uniform in size during interphase, grows in mitosis, and is resorbed during cytokinesis. A flangin truncation mutant stabilizes the flange and blocks cytokinesis, indicating that flange disassembly is necessary for rapid myosin-independent cytokinesis in Giardia. Rho family GTPases are important regulators of membrane protrusions and GlRac, the sole Rho family GTPase in Giardia, was localized to the flange. Knockdown of Flangin, GlActin, and GlRac result in flange formation defects. This indicates a conserved role for GlRac and GlActin in forming membrane protrusions, despite the absence of canonical actin binding proteins that link Rho GTPase signaling to lamellipodia formation. Flangin-depleted parasites had reduced surface contact and when challenged with fluid shear force in flow chambers they had a reduced ability to remain attached, confirming a role for the flange in attachment. This secondary attachment mechanism complements the microtubule based adhesive ventral disc, a feature that may be particularly important during mitosis when the parental ventral disc disassembles in preparation for cytokinesis. This work supports the emerging view that Giardia's unconventional actin cytoskeleton has an important role in supporting parasite attachment.

Multiplexed single-cell profiling of chromatin states at genomic loci by expansion microscopy.

Proper regulation of genome architecture and activity is essential for the development and function of multicellular organisms. Histone modifications, acting in combination, specify these activity states at individual genomic loci. However, the methods used to study these modifications often require either a large number of cells or are limited to targeting one histone mark at a time. Here, we developed a new method called Single Cell Evaluation of Post-TRanslational Epigenetic Encoding (SCEPTRE) that uses Expansion Microscopy (ExM) to visualize and quantify multiple histone modifications at non-repetitive genomic regions in single cells at a spatial resolution of ∼75 nm. Using SCEPTRE, we distinguished multiple histone modifications at a single housekeeping gene, quantified histone modification levels at multiple developmentally-regulated genes in individual cells, and evaluated the relationship between histone modifications and RNA polymerase II loading at individual loci. We find extensive variability in epigenetic states between individual gene loci hidden from current population-averaged measurements. These findings establish SCEPTRE as a new technique for multiplexed detection of combinatorial chromatin states at single genomic loci in single cells.

Expansion microscopy with conventional antibodies and fluorescent proteins.

Expansion microscopy is a technique in which fluorophores on fixed specimens are linked to a swellable polymer that is physically expanded to enable super-resolution microscopy with ordinary microscopes. We have developed and characterized new methods for linking fluorophores to the polymer that now enable expansion microscopy with conventional fluorescently labeled antibodies and fluorescent proteins. Our methods simplify the procedure and expand the palette of compatible labels, allowing rapid dissemination of the technique.

Extended-Depth 3D Super-Resolution Imaging Using Probe-Refresh STORM.

Single-molecule localization microscopy methods for super-resolution fluorescence microscopy such as STORM (stochastic optical reconstruction microscopy) are generally limited to thin three-dimensional (3D) sections (≤600 nm) because of photobleaching of molecules outside the focal plane. Although multiple focal planes may be imaged before photobleaching by focusing progressively deeper within the sample, image quality is compromised in this approach because the total number of measurable localizations is divided between detection planes. Here, we solve this problem on fixed samples by developing an imaging method that we call probe-refresh STORM (prSTORM), which allows bleached fluorophores to be straightforwardly replaced with nonbleached fluorophores. We accomplish this by immunostaining the sample with DNA-conjugated antibodies and then reading out their distribution using fluorescently-labeled DNA-reporter oligonucleotides that can be fully replaced in successive rounds of imaging. We demonstrate that prSTORM can acquire 3D images over extended depths without sacrificing the density of localizations at any given plane. We also show that prSTORM can be adapted to obtain high-quality, 3D multichannel images with extended depth that would be challenging or impossible to achieve using established probe methods.

Electrodeposition of polydopamine thin films for DNA patterning and microarrays.

The controlled electrodeposition of functional polydopamine (PDA) thin films from aqueous dopamine solutions is demonstrated with a combination of electrochemistry, atomic force microscopy (AFM), and surface plasmon resonance (SPR) measurements. PDA micropatterns are then fabricated by electrodeposition on micrometer length scale gold electrodes and used for attaching amino-modified single-stranded DNA (ssDNA). After hybridization with fluorescently labeled ssDNA, the fluorescence microscopy characterization reveals that: (i) PDA can be toposelectively deposited at the microscale and (ii) electrochemically deposited PDA can be functionalized with amino-terminated ssDNA using the same chemistry as that for spontaneously deposited PDA. Finally, the application of electrodeposited PDA thin films to fabricate ssDNA microarrays is reported using SPR imaging (SPRI) measurements for the detection of DNA and DNA-modified gold nanoparticles.

Fabrication of DNA microarrays on polydopamine-modified gold thin films for SPR imaging measurements.

Polydopamine (PDA) films were fabricated on thin film gold substrates in a single-step polymerization-deposition process from dopamine solutions and then employed in the construction of robust DNA microarrays for the ultrasensitive detection of biomolecules with nanoparticle-enhanced surface plasmon resonance (SPR) imaging. PDA multilayers with thicknesses varying from 1 to 5 nm were characterized with a combination of scanning angle SPR and AFM experiments, and 1.3 ± 0.2 nm PDA multilayers were chosen as an optimal thickness for the SPR imaging measurements. DNA microarrays were then fabricated by the reaction of amine-functionalized single-stranded DNA (ssDNA) oligonucleotides with PDA-modified gold thin film microarray elements, and were subsequently employed in SPR imaging measurements of DNA hybridization adsorption and protein-DNA binding. Concurrent control experiments with non-complementary ssDNA sequences demonstrated that the adhesive PDA multilayer was also able to provide good resistance to the nonspecific binding of biomolecules. Finally, a series of SPR imaging measurements of the hybridization adsorption of DNA-modified gold nanoparticles onto mixed sequence DNA microarrays were used to confirm that the use of PDA multilayer films is a simple, rapid, and versatile method for fabricating DNA microarrays for ultrasensitive nanoparticle-enhanced SPR imaging biosensing.

On-chip synthesis of protein microarrays from DNA microarrays via coupled in vitro transcription and translation for surface plasmon resonance imaging biosensor applications.

Protein microarrays are fabricated from double-stranded DNA (dsDNA) microarrays by a one-step, multiplexed enzymatic synthesis in an on-chip microfluidic format and then employed for antibody biosensing measurements with surface plasmon resonance imaging (SPRI). A microarray of dsDNA elements (denoted as generator elements) that encode either a His-tagged green fluorescent protein (GFP) or a His-tagged luciferase protein is utilized to create multiple copies of mRNA (mRNA) in a surface RNA polymerase reaction; the mRNA transcripts are then translated into proteins by cell-free protein synthesis in a microfluidic format. The His-tagged proteins diffuse to adjacent Cu(II)-NTA microarray elements (denoted as detector elements) and are specifically adsorbed. The net result is the on-chip, cell-free synthesis of a protein microarray that can be used immediately for SPRI protein biosensing. The dual element format greatly reduces any interference from the nonspecific adsorption of enzyme or proteins. SPRI measurements for the detection of the antibodies anti-GFP and antiluciferase were used to verify the formation of the protein microarray. This convenient on-chip protein microarray fabrication method can be implemented for multiplexed SPRI biosensing measurements in both clinical and research applications.

Near infrared surface plasmon resonance phase imaging and nanoparticle-enhanced surface plasmon resonance phase imaging for ultrasensitive protein and DNA biosensing with oligonucleotide and aptamer microarrays.

The techniques of surface plasmon resonance-phase imaging (SPR-PI) and nanoparticle-enhanced SPR-PI have been implemented for the multiplexed bioaffinity detection of proteins and nucleic acids. The SPR-PI experiments utilized a near-infrared 860 nm light emitting diode (LED) light source and a wedge depolarizer to create a phase grating on a four-element single-stranded DNA (ssDNA) microarray; bioaffinity adsorption onto the various microarray elements was detected via multiplexed real time phase shift measurements. In a first set of demonstration experiments, an ssDNA aptamer microarray was used to directly detect thrombin at concentrations down to 100 pM with SPR-PI. Two different ssDNA aptamers were used in these experiments with two different Langmuir adsorption coefficients, K(A1) = 4.4 × 10(8) M(-1) and K(A2) = 1.2 × 10(8) M(-1). At concentrations below 1 nM, the equilibrium phase shifts observed upon thrombin adsorption vary linearly with concentration with a slope that is proportional to the appropriate Langmuir adsorption coefficient. The observed detection limit of 100 pM is approximately 20 times more sensitive than that observed previously with SPRI. In a second set of experiments, two short ssDNA oligonucleotides (38mers) were simultaneously detected at concentrations down to 25 fM using a three-sequence hybridization format that employed 120 nm DNA-modified silica nanoparticles to enhance the SPR-PI signal. In this first demonstration of nanoparticle-enhanced SPR-PI, the adsorbed silica nanoparticles provided a greatly enhanced phase shift upon bioaffinity adsorption due to a large increase in the real component of the interfacial refractive index from the adsorbed nanoparticle. As in the case of SPR-PI, the detection limit of 25 fM for nanoparticle-enhanced SPR-PI is approximately 20 times more sensitive than that observed previously with nanoparticle-enhanced SPRI.

Wafer-scale fabrication of nanofluidic arrays and networks using nanoimprint lithography and lithographically patterned nanowire electrodeposition gold nanowire masters.

Wafer scale (cm(2)) arrays and networks of nanochannels were created in polydimethylsiloxane (PDMS) from a surface pattern of electrodeposited gold nanowires in a master-replica process and characterized with scanning electron microscopy (SEM), atomic force microscopy (AFM), and fluorescence imaging measurements. Patterns of gold nanowires with cross-sectional dimensions as small as 50 nm in height and 100 nm in width were prepared on silica substrates using the process of lithographically patterned nanowire electrodeposition (LPNE). These nanowire patterns were then employed as masters for the fabrication of inverse replica nanochannels in a special formulation of PDMS. SEM and AFM measurements verified a linear correlation between the widths and heights of the nanowires and nanochannels over a range of 50 to 500 nm. The PDMS replica was then oxygen plasma-bonded to a glass substrate in order to create a linear array of nanofluidic channels (up to 1 mm in length) filled with solutions of either fluorescent dye or 20 nm diameter fluorescent polymer nanoparticles. Nanochannel continuity and a 99% fill success rate was determined from the fluorescence imaging measurements, and the electrophoretic injection of both dye and nanoparticles in the nanochannel arrays was also demonstrated. Employing a double LPNE fabrication method, this master-replica process was also used to create a large two-dimensional network of crossed nanofluidic channels.

Wide-field, surface-sensitive four-wave mixing microscopy of nanostructures.

We describe a wide-field four-wave mixing (FWM) microscope with imaging characteristics optimized for examining nanostructures. The microscope employs surface-plasmon polariton (SPP) excitation in a gold film to achieve surface-sensitive imaging conditions. The SPP surface fields boost the FWM efficiency by 2 orders of magnitude relative to the excitation efficiency of the evanescent fields at a bare glass surface. We demonstrate two excitation geometries that completely suppress the electronic FWM response of the metal film while allowing the far-field detection of FWM radiation from nanostructures at the interface. We obtained wide-field FWM images from individual carbon nanotubes and nanoclusters of neocyanine molecules at image acquisition times of 1 s, demonstrating the potential for background free, surface-enhanced FWM imaging of nanomaterials.

Versatile, do-it-yourself, low-cost spinning disk confocal microscope.

Confocal microscopy is an invaluable tool for 3D imaging of biological specimens, however, accessibility is often limited to core facilities due to the high cost of the hardware. We describe an inexpensive do-it-yourself (DIY) spinning disk confocal microscope (SDCM) module based on a commercially fabricated chromium photomask that can be added on to a laser-illuminated epifluorescence microscope. The SDCM achieves strong performance across a wide wavelength range (∼400-800 nm) as demonstrated through a series of biological imaging applications that include conventional microscopy (immunofluorescence, small-molecule stains, and fluorescence in situ hybridization) and super-resolution microscopy (single-molecule localization microscopy and expansion microscopy). This low-cost and simple DIY SDCM is well-documented and should help increase accessibility to confocal microscopy for researchers.

Fluorescent labeling of abundant reactive entities (FLARE) for cleared-tissue and super-resolution microscopy.

Fluorescence microscopy is a vital tool in biomedical research but faces considerable challenges in achieving uniform or bright labeling. For instance, fluorescent proteins are limited to model organisms, and antibody conjugates can be inconsistent and difficult to use with thick specimens. To partly address these challenges, we developed a labeling protocol that can rapidly visualize many well-contrasted key features and landmarks on biological specimens in both thin and thick tissues or cultured cells. This approach uses established reactive fluorophores to label a variety of biological specimens for cleared-tissue microscopy or expansion super-resolution microscopy and is termed FLARE (fluorescent labeling of abundant reactive entities). These fluorophores target chemical groups and reveal their distribution on the specimens; amine-reactive fluorophores such as hydroxysuccinimidyl esters target accessible amines on proteins, while hydrazide fluorophores target oxidized carbohydrates. The resulting stains provide signals analogous to traditional general histology stains such as H&E or periodic acid-Schiff but use fluorescent probes that are compatible with volumetric imaging. In general, the stains for FLARE are performed in the order of carbohydrates, amine and DNA, and the incubation time for the stains varies from 1 h to 1 d depending on the combination of stains and the type and thickness of the biological specimens. FLARE is powerful, robust and easy to implement in laboratories that already routinely do fluorescence microscopy.

Conservation and divergence of cortical cell organization in human and mouse revealed by MERFISH.

The human cerebral cortex has tremendous cellular diversity. How different cell types are organized in the human cortex and how cellular organization varies across species remain unclear. In this study, we performed spatially resolved single-cell profiling of 4000 genes using multiplexed error-robust fluorescence in situ hybridization (MERFISH), identified more than 100 transcriptionally distinct cell populations, and generated a molecularly defined and spatially resolved cell atlas of the human middle and superior temporal gyrus. We further explored cell-cell interactions arising from soma contact or proximity in a cell type-specific manner. Comparison of the human and mouse cortices showed conservation in the laminar organization of cells and differences in somatic interactions across species. Our data revealed human-specific cell-cell proximity patterns and a markedly increased enrichment for interactions between neurons and non-neuronal cells in the human cortex.

Surface plasmon resonance phase imaging measurements of patterned monolayers and DNA adsorption onto microarrays.

The optical technique of surface plasmon resonance phase imaging (SPR-PI) is implemented in a linear microarray format for real-time measurements of surface bioaffinity adsorption processes. SPR-PI measures the phase shift of p-polarized light incident at the SPR angle reflected from a gold thin film in an ATR Kretschmann geometry by creating an interference fringe image on the interface with a polarizer-quartz wedge depolarizer combination. The position of the fringe pattern in this image changes upon the adsorption of biomolecules to the gold thin film. By using a linear array of 500 µm biosensor element lines that are perpendicular to the interference fringe image, multiple bioaffinity adsorption measurements can be performed in real time. Two experiments were performed to characterize the sensitivity of the SPR-PI measurement technique: First, a ten line pattern of a self-assembled monolayer of 11-mercaptoundecamine (MUAM) was created via photopatterning to verify that multiple phase shifts could be measured simultaneously. A phase shift difference (Δφ) of Δφ = 182.08 ± 0.03° was observed for the 1.8 nm MUAM monolayer; this value agrees with the phase shift difference calculated from a combination of Fresnel equations and Jones matrices for the depolarizer. In a second demonstration experiment, the feasibility of SPR-PI for in situ bioaffinity adsorption measurements was confirmed by detecting the hybridization and adsorption of single stranded DNA (ssDNA) onto a six-component DNA line microarray patterned monolayer. Adsorption of a full DNA monolayer produced a phase shift difference of Δφ = 28.80 ± 0.03° at the SPR angle of incidence and the adsorption of the ssDNA was monitored in real time with the SPR-PI. These initial results suggest that SPR-PI should have a detection limit roughly 100 times lower than traditional intensity-based SPR imaging measurements.

Fabricating nanoscale DNA patterns with gold nanowires.

Surface patterns of single-stranded DNA (ssDNA) consisting of nanoscale lines as thin as 40 nm were fabricated on polymer substrates for nanotechnology and bioaffinity sensing applications. Large scale arrays (with areas up to 4 cm(2)) of ssDNA "nanolines" were created on streptavidin-coated polymer (PDMS) surfaces by transferring biotinylated ssDNA from a master pattern of gold nanowires attached to a glass substrate. The gold nano-wires were first formed on the glass substrate by the process of lithographically patterned nanowire electrodeposition (LPNE), and then "inked" with biotinylated ssDNA by hybridization adsorption to a thiol-modified ssDNA monolayer attached to the gold nanowires. The transferred ssDNA nanolines were capable of hybridizing with ssDNA from solution to form double-stranded DNA (dsDNA) patterns; a combination of fluorescence and atomic force microscopy (AFM) measurements were used to characterize the dsDNA nanoline arrays. To demonstrate the utility of these surfaces for biosensing, optical diffraction measurements of the hybridization adsorption of DNA-coated gold nanoparticles onto the ssDNA nanoline arrays were used to detect a specific target sequence of unlabeled ssDNA in solution.

Feature-rich covalent stains for super-resolution and cleared tissue fluorescence microscopy.

Fluorescence microscopy is a workhorse tool in biomedical imaging but often poses substantial challenges to practitioners in achieving bright or uniform labeling. In addition, while antibodies are effective specific labels, their reproducibility is often inconsistent, and they are difficult to use when staining thick specimens. We report the use of conventional, commercially available fluorescent dyes for rapid and intense covalent labeling of proteins and carbohydrates in super-resolution (expansion) microscopy and cleared tissue microscopy. This approach, which we refer to as Fluorescent Labeling of Abundant Reactive Entities (FLARE), produces simple and robust stains that are modern equivalents of classic small-molecule histology stains. It efficiently reveals a wealth of key landmarks in cells and tissues under different fixation or sample processing conditions and is compatible with immunolabeling of proteins and in situ hybridization labeling of nucleic acids.

Characterization of electrodeposited gold and palladium nanowire gratings with optical diffraction measurements.

Parallel arrays of either Au or Pd nanowires were fabricated on glass substrates via the electrochemical process of lithographically patterned nanowire electrodeposition (LPNE) and then characterized with scanning electron microscopy (SEM) and a series of optical diffraction measurements at 633 nm. Nanowires with widths varying from 25 to 150 nm were electrodeposited onto nanoscale Ni surfaces created by the undercut etching of a photoresist pattern on a planar substrate. With the use of a simple transmission grating geometry, up to 60 diffraction orders were observed from the nanowire gratings, with separate oscillatory intensity patterns appearing in the even and odd diffraction orders. The presence of these intensity oscillations is attributed to the LPNE array fabrication process, which creates arrays with alternating interwire spacings of distances d +Delta and d -Delta, where d = 25 microm and the asymmetry Delta varied from 0 to 3.5 microm. The amount of asymmetry could be controlled by varying the LPNE undercut etching time during the creation of the nanoscale Ni surfaces. The Fourier transform of a mathematical model of the nanowire array was used to predict the diffraction intensity patterns and quantitatively determine Delta for any grating. Additional sensitivity and an expanded diffraction order range were obtained through the use of external reflection (ER) and total internal reflection (TIR) diffraction geometries.

Multi-immersion open-top light-sheet microscope for high-throughput imaging of cleared tissues.

Recent advances in optical clearing and light-sheet microscopy have provided unprecedented access to structural and molecular information from intact tissues. However, current light-sheet microscopes have imposed constraints on the size, shape, number of specimens, and compatibility with various clearing protocols. Here we present a multi-immersion open-top light-sheet microscope that enables simple mounting of multiple specimens processed with a variety of clearing protocols, which will facilitate wide adoption by preclinical researchers and clinical laboratories. In particular, the open-top geometry provides unsurpassed versatility to interface with a wide range of accessory technologies in the future.

Volumetric, Nanoscale Optical Imaging of Mouse and Human Kidney via Expansion Microscopy.

Although light microscopy is a powerful tool for the assessment of kidney physiology and pathology, it has traditionally been unable to resolve structures separated by less than the ~250 nm diffraction limit of visible light. Here, we report on the optimization, validation, and application of a recently developed super-resolution fluorescence microscopy method, called expansion microscopy (ExM), for volumetric interrogation of mouse and human kidney tissue with 70-75 nm lateral and ~250 nm axial spatial resolution. Using ExM with a standard confocal microscope, we resolve fine details of structures that have traditionally required visualization by electron microscopy, including podocyte foot processes, the glomerular basement membrane, and the cytoskeleton. This inexpensive and accessible approach to volumetric, nanoscale imaging enables visualization of fine structural details of kidney tissues that were previously difficult or impossible to measure by conventional methodologies.