Comprehensive review: Effects of climate change and greenhouse gases emission relevance to environmental stress on horticultural crops and management.

Global climate change exerts a significant impact on sustainable horticultural crop production and quality. Rising Global temperatures have compelled the agricultural community to adjust planting and harvesting schedules, often necessitating earlier crop cultivation. Notably, climate change introduces a suite of ominous factors, such as greenhouse gas emissions (CGHs), including elevated temperature, increased carbon dioxide (CO2) concentrations, nitrous oxide (N2O) and methane (CH4) ozone depletion (O3), and deforestation, all of which intensify environmental stresses on crops. Consequently, climate change stands poised to adversely affect crop yields and livestock production. Therefore, the primary objective of the review article is to furnish a comprehensive overview of the multifaceted factors influencing horticulture production, encompassing fruits, vegetables, and plantation crops with a particular emphasis on greenhouse gas emissions and environmental stressors such as high temperature, drought, salinity, and emission of CO2. Additionally, this review will explore the implementation of novel horticultural crop varieties and greenhouse technology that can contribute to mitigating the adverse impact of climate change on agricultural crops.

Modern Trends in Plant Genome Editing: An Inclusive Review of the CRISPR/Cas9 Toolbox.

Increasing agricultural productivity via modern breeding strategies is of prime interest to attain global food security. An array of biotic and abiotic stressors affect productivity as well as the quality of crop plants, and it is a primary need to develop crops with improved adaptability, high productivity, and resilience against these biotic/abiotic stressors. Conventional approaches to genetic engineering involve tedious procedures. State-of-the-art OMICS approaches reinforced with next-generation sequencing and the latest developments in genome editing tools have paved the way for targeted mutagenesis, opening new horizons for precise genome engineering. Various genome editing tools such as transcription activator-like effector nucleases (TALENs), zinc-finger nucleases (ZFNs), and meganucleases (MNs) have enabled plant scientists to manipulate desired genes in crop plants. However, these approaches are expensive and laborious involving complex procedures for successful editing. Conversely, CRISPR/Cas9 is an entrancing, easy-to-design, cost-effective, and versatile tool for precise and efficient plant genome editing. In recent years, the CRISPR/Cas9 system has emerged as a powerful tool for targeted mutagenesis, including single base substitution, multiplex gene editing, gene knockouts, and regulation of gene transcription in plants. Thus, CRISPR/Cas9-based genome editing has demonstrated great potential for crop improvement but regulation of genome-edited crops is still in its infancy. Here, we extensively reviewed the availability of CRISPR/Cas9 genome editing tools for plant biotechnologists to target desired genes and its vast applications in crop breeding research.

Study on nitrogen demand model in pakchoi (Brassica campestris ssp. Chinensis L.) based on nitrogen contents and phenotypic characteristics.

Introduction: In precision agriculture, the diagnosis of the nitrogen (N) nutrition status based on the plant phenotype, combined effects of soil types, various agricultural practices, and environmental factors which are essential for plant N accumulation. It helps to assess the N supply for plants at the right time and optimal amount to ensure high N use efficiency thereby reducing the N fertilizer applications to minimize environmental pollution. For this purpose, three different experiments were performed. Methods: A critical N content (Nc) model was constructed based on cumulative photothermal effect (LTF), Napplications, and cultivation systems on yield and N uptake in pakchoi. Results and discussion: According to the model, aboveground dry biomass (DW) accumulation was found equal or below to 1.5 t/ha, and the Nc value was observed at a constant of 4.78%. However, when DW accumulation exceeded 1.5 t/ha, Nc declined with the increase in DW accumulation, and the relationship between Nc and DW accumulation developed with the function Nc %=4.78 x DW-0.33. An N demand model was established based on the multi-information fusion method, which integrated multiple factors, including Nc, phenotypical indexes, temperature during the growth period, photosynthetically active radiation, and N applications. Furthermore, the model's accuracy was verified, and the predicted N contents were found consistent with the measured values (R2 = 0.948 and RMSE = 1.96 mg/plant). At the same time, an N demand model based on N use efficiency was proposed. Conclusions: This study can provide theoretical and technical support for precise N management in pakchoi production.

Reduction of nitrous oxide emission by using stearic acid combined zinc coated urea in silty clay and sandy loam soils under bare and planted conditions.

Overuse of chemical fertilizers in agroecosystems leads to the increased economic burden, low crop production in terms of input and environmental pollution. Due to its improved nutrient management and degrading properties, synthetic slow release fertilizers have become a significant advancement in the fertilizer sector. In this study we evaluated the effect of slow release urea on nitrous oxide (N2O) emission, crop growth and crop nutrient contents. Measurements were carried out in two different texture soils (sandy loam and silty clay) under two different conditions (bare soil and planted). The N2O emission was measured for 15 days from bare soils and 48 days from planted soil. Plant fresh weight, dry weight, chlorophyll contents, N and Zn were measured in the end of the experiment. The results showed that N2O emission was reduced 33-39 % from coated urea as compared to conventional urea in bare soil. In planted soil, the coated urea reduced the N2O emission 29-33 %. The deep placement of urea in silty clay soil reduced the N2O emission up to 22.8 % as compared to surface placement. Plant fresh matter, dry matter, N and Zn contents were significantly (p ≤ 0.05) higher with coated urea as compared to conventional urea. It is concluded that the coating of urea with hydrophobic materials like stearic acid, along with Zn sources i.e. Zn fortified nano-bentonite or the ZnO nanoparticles (NPs) presents opportunities to overcome the environmental pollution and increasing the crop production and quality.

Co-application of copper oxide nanoparticles and Trichoderma harzianum with physiological, enzymatic and ultrastructural responses for the mitigation of salt stress.

Chemical contamination or nutrient pollution is concerning for health, environmental, and economic reasons. Ecofriendly surface modification of nanoparticles is a consistent challenge for agricultural purposes. In response to this environmental concern, CuO-NPs synthesized through biological method using green source and characterized for morphological and structural features through SEM (scanning electron microscope) and TEM (transmission electron microscope) spectroscopy. Our research findings illustrate that the presence of salt stress induces a notable decline in both physiological and biochemical parameters within plants. Nevertheless, the utilization of T. harzianum and CuO-NPs exhibited a mitigating effect on the detrimental consequences induced by salt stress in plants. The application of T. harzianum and the simultaneous co-inoculation with CuO-NPs notably enhanced fresh biomass and facilitated vegetative growth in comparison to the control group. Furthermore, the exposure of both T. harzianum inoculum and Copper oxide nanoparticles resulted in a significant reduction of oxidative stresses, including reactive oxygen species (ROS) levels, H2O2, and lipid peroxidation (MDA) levels in the above-ground parts of the plant, while also minimizing electrolyte leakage (EL) by reducing root growth. Additionally, the co-inoculation of the endophyte and CuO-NPs led to a significant enhancement in antioxidant enzymatic activities, such as superoxide dismutase (SOD) and chitinase (CAT) activity in the above-ground parts, under salt stress conditions. The inoculum, along with its combination with CuO-NPs, decreased electrolyte conductivity and improved total chlorophyll contents as compared to the control. The combined application of T. harzianum and CuO-NPs improved salt tolerance in A. thaliana plants by triggering salt-associated gene expression. These findings suggest that the application of T. harzianum and CuO-NPs can considerably promote leaf anatomical changes in A. thaliana and have ability to enhance salt tolerance, particularly in saline areas.

Advances in Metabolomics-Driven Diagnostic Breeding and Crop Improvement.

Climate change continues to threaten global crop output by reducing annual productivity. As a result, global food security is now considered as one of the most important challenges facing humanity. To address this challenge, modern crop breeding approaches are required to create plants that can cope with increased abiotic/biotic stress. Metabolomics is rapidly gaining traction in plant breeding by predicting the metabolic marker for plant performance under a stressful environment and has emerged as a powerful tool for guiding crop improvement. The advent of more sensitive, automated, and high-throughput analytical tools combined with advanced bioinformatics and other omics techniques has laid the foundation to broadly characterize the genetic traits for crop improvement. Progress in metabolomics allows scientists to rapidly map specific metabolites to the genes that encode their metabolic pathways and offer plant scientists an excellent opportunity to fully explore and rationally harness the wealth of metabolites that plants biosynthesize. Here, we outline the current application of advanced metabolomics tools integrated with other OMICS techniques that can be used to: dissect the details of plant genotype-metabolite-phenotype interactions facilitating metabolomics-assisted plant breeding for probing the stress-responsive metabolic markers, explore the hidden metabolic networks associated with abiotic/biotic stress resistance, facilitate screening and selection of climate-smart crops at the metabolite level, and enable accurate risk-assessment and characterization of gene edited/transgenic plants to assist the regulatory process. The basic concept behind metabolic editing is to identify specific genes that govern the crucial metabolic pathways followed by the editing of one or more genes associated with those pathways. Thus, metabolomics provides a superb platform for not only rapid assessment and commercialization of future genome-edited crops, but also for accelerated metabolomics-assisted plant breeding. Furthermore, metabolomics can be a useful tool to expedite the crop research if integrated with speed breeding in future.

Differential Metabolic Responses of Lettuce Grown in Soil, Substrate and Hydroponic Cultivation Systems under NH4+/NO3- Application.

Nitrogen (N) is an essential element for plant growth and development. The application of a balanced and optimal amount of N is required for sustainable plant yield. For this, different N sources and forms are used, that including ammonium (NH4+) and nitrate (NO3-). These are the main sources for N uptake by plants where NH4+/NO3- ratios have a significant effect on the biomass, quality and metabolites composition of lettuce grown in soil, substrate and hydroponic cultivation systems. A limited supply of N resulted in the reduction in the biomass, quality and overall yield of lettuce. Additionally, different types of metabolites were produced with varying concentrations of N sources and can be used as metabolic markers to improve the N use efficiency. To investigate the differential metabolic activity, we planted lettuce with different NH4+/NO3- ratios (100:0, 75:25, 50:50, 25:75 and 0:100%) and a control (no additional N applied) in soil, substrate and hydroponic cultivation systems. The results revealed that the 25% NH4+/75% NO3- ratio increased the relative chlorophyll contents as well as the biomass of lettuce in all cultivation systems. However, lettuce grown in the hydroponic cultivation system showed the best results. The concentration of essential amino acids including alanine, valine, leucine, lysine, proline and serine increased in soil and hydroponically grown lettuce treated with the 25% NH4+/75% NO3- ratio. The taste and quality-related compounds in lettuce showed maximum relative abundance with the 25% NH4+/75% NO3- ratio, except ascorbate (grown in soil) and lactupicrin (grown in substrate), which showed maximum relative abundance in the 50% NH4+/50% NO3- ratio and control treatments, respectively. Moreover, 1-O-caffeoylglucose, 1,3-dicaffeoylquinic acid, aesculetin and quercetin-3-galactoside were increased by the application of the 100% NH4+/0% NO3- ratio in soil-grown lettuce. The 25% NH4+/75% NO3- ratio was more suitable in the hydroponic cultivation system to obtain increased lettuce biomass. The metabolic profiling of lettuce showed different behaviors when applying different NH4+/NO3- ratios. Therefore, the majority of the parameters were largely influenced by the 25% NH4+/75% NO3- ratio, which resulted in the hyper-accumulation of health-promoting compounds in lettuce. In conclusion, the optimal N applications improve the quality of lettuce grown in soil, substrate and hydroponic cultivation systems which ultimately boost the nutritional value of lettuce.