Thermal Surface Properties, London Dispersive and Polar Surface Energy of Graphene and Carbon Materials Using Inverse Gas Chromatography at Infinite Dilution.

The thermal surface properties of graphenes and carbon materials are of crucial importance in the chemistry of materials, chemical engineering, and many industrial processes. BACKGROUND: The determination of these surface properties is carried out using inverse gas chromatography at infinite dilution, which leads to the retention volume of organic solvents adsorbed on solid surfaces. This experimental and fundamental parameter actually reflects the surface thermodynamic interactions between injected probes and solid substrates. METHODS: The London dispersion equation and the Hamieh thermal model are used to quantify the London dispersive and polar surface energy of graphenes and carbon fibers as well their Lewis acid-base constants by introducing the coupling amphoteric constant of materials. RESULTS: The London dispersive and polar acid-base surface energies, the free energy of adsorption, the polar enthalpy and entropy, and the Lewis acid-base constants of graphenes and carbon materials are determined. CONCLUSIONS: It is shown that graphene exhibited the highest values of London dispersive surface energy, polar surface energy, and Lewis acid-base constants. The highest characteristics of graphene justify its great potentiality and uses in many industrial applications.

Temperature Dependence of the Polar and Lewis Acid-Base Properties of Poly Methyl Methacrylate Adsorbed on Silica via Inverse Gas Chromatography.

The adsorption of polymers on solid surfaces is common in many industrial applications, such as coatings, paints, catalysis, colloids, and adhesion processes. The properties of absorbed polymers commonly vary with temperature. In this paper, inverse gas chromatography at infinite dilution was used to determine the physicochemical characterization of PMMA adsorbed on silica. A new method based on the London dispersion equation was applied with a new parameter associating the deformation polarizability with the harmonic mean of the ionization energies of the solvent. More accurate values of the dispersive and polar interaction energies of the various organic solvents adsorbed on PMMA in bulk phase and PMMA/silica at different recovery fractions were obtained, as well as the Lewis acid-base parameters and the transition temperatures of the different composites. It was found that the temperature and the recovery fraction have important effects on the various physicochemical and thermodynamic properties. The variations in all the interaction parameters showed the presence of three transition temperatures for the different PMMA composites adsorbed on silica with various coverage rates, with a shift in these temperatures for a recovery fraction of 31%. An important variation in the polar enthalpy and entropy of adsorption, the Lewis acid-base parameters and the intermolecular separation distance was highlighted as a function of the temperature and the recovery fraction of PMMA on silica.

New Progress on London Dispersive Energy, Polar Surface Interactions, and Lewis's Acid-Base Properties of Solid Surfaces.

The determination of the polar surface free energy, polar properties, and Lewis's acid base of solid materials is of capital importance in many industrial processes, such as adhesion, coatings, two-dimensional films, and adsorption phenomena. (1) Background: The physicochemical properties of many solid particles were characterized during the last forty years by using the retention time of injected well-known molecules into chromatographic columns containing the solid substrates to be characterized. The obtained net retention time of the solvents adsorbed on the solid, allowing the determination of the net retention volume directly correlated to the specific surface variables, dispersive, polar, and acid-base properties. (2) Methods: Many chromatographic methods were used to quantify the values of the different specific surface variables of the solids. However, one found a large deviation between the different results. In this paper, one proposed a new method based on the London dispersion equation that allowed the quantification of the polar free energy of adsorption, as well as the Lewis's acid-base constants of many solid surfaces. (3) Results: The newly applied method allowed us to obtain the polar enthalpy and entropy of adsorption of polar model organic molecules on several solid substrates, such as silica, alumina, MgO, ZnO, Zn, TiO2, and carbon fibers. (4) Conclusions: our new method based on the separation between the dispersive and polar free surface energy allowed us to better characterize the solid materials.

Some Irregularities in the Evaluation of Surface Parameters of Solid Materials by Inverse Gas Chromatography.

The London dispersive component of the surface energy of solid particles, their specific interactions, and Lewis acid-base parameters were usually calculated by using the inverse gas chromatography technique at infinite dilution. Serious irregularities were committed by some authors when using the Schultz method or Dorris-Gray relation. We proved that these methods cannot be used because they did not consider the important role of the temperature on variations in the surface area of solvents. We corrected in this paper some recent results by using new relations of the surface area of organic probes depending on the temperature and by using different molecular models using different geometries and mathematical calculations. The application of our new thermal model gave more precise results of the dispersive energy and Lewis's acid-base constants of solid particles. The new thermal model was applied to several solid surfaces such as Ni-MOF-74, MgO, ZnO, TiO2, and Zn(OH)2. The obtained results showed a stronger Lewis basicity of MgO solid substrate and higher Lewis acidity of the Ni-MOF-74 surface.

The role of the gold-platinum interface in AuPt/TiO2-catalyzed plasmon-induced reduction of CO2 with water.

Bimetallic gold-platinum nanoparticles have been widely studied in the fields of nanoalloys, catalysis and plasmonics. Many preparation methods can lead to the formation of these bimetallic nanoparticles (NPs), and the structure and related properties of the nanoalloy often depend on the preparation method used. Here we investigate the ability of thermal dimethylformamide (DMF) reduction to prepare bimetallic gold-platinum sub-nm clusters supported on titania. We find that deposition of Pt preferentially occurs on gold. Formation of sub-nm clusters (vs. NPs) appears to be dependent on the metal concentration used: clusters can be obtained for metal loadings up to 4 wt% but 7-8 nm NPs are formed for metal loadings above 8 wt%, as shown using high resolution transmission electron microscopy (HRTEM). X-ray photoelectron spectroscopy (XPS) shows electron-rich Au and Pt components in a pure metallic form and significant platinum enrichment of the surface, which increases with increasing Pt/Au ratio and suggests the presence of Au@Pt core-shell type structures. By contrast, titania-supported bimetallic particles (typically >7 nm) obtained by sodium borohydride (NaBH4) reduction in DMF, contain Au/Pt Janus-type objects in addition to oxidized forms of Pt as evidenced by HRTEM, which is in agreement with the lower Pt surface enrichment found by XPS. Both types of supported nanostructures contain a gold-platinum interface, as shown by the chemical interface damping, i.e. gold plasmon damping by Pt, found using UV-visible spectroscopy. Evaluation of the materials for plasmon-induced continuous flow CO2 reduction with water, shows that: (1) subnanometer metallic clusters are not suitable for CO2 reduction with water, producing hydrogen from the competing water reduction instead, thereby highlighting the plasmonic nature of the reaction; (2) the highest methane production rates are obtained for the highest Pt enrichments of the surface, i.e. the core-shell-like structures achieved by the thermal DMF reduction method; (3) selectivity towards CO2 reduction vs. the competing water reduction is enhanced by loading of the plasmonic NPs, i.e. coverage of the titania semi-conductor by plasmonic NPs. Full selectivity is achieved for loadings above 6 wt%, regardless of the NPs composition and alloy structure.

Synthesis of Hierarchical MOR-Type Zeolites with Improved Catalytic Properties.

Hierarchical MOR-type zeolites were synthesized in the presence of hexadecyltrimethylammonium bromide (CTAB) as a porogen agent. XRD proved that the concentration of CTAB in the synthesis medium plays an essential role in forming pure hierarchical MOR-type material. Above a CTAB concentration of 0.04 mol·L-1, amorphous materials are observed. These hierarchical mordenite possess a higher porous volume compared to its counterpart conventional micrometer crystals. Nitrogen sorption showed the presence of mesoporosity for all mordenite samples synthesized in the presence of CTAB. The creation of mesopores due to the presence of CTAB in the synthesis medium does not occur at the expense of zeolite micropores. In addition, mesoporous volume and BET surface seem to increase upon the increase of CTAB concentration in the synthesis medium. The Si/Al ratio of the zeolite framework can be increased from 5.5 to 9.1 by halving the aluminum content present in the synthesis gel. These synthesized hierarchical MOR-type zeolites possess an improved catalytic activity for n-hexane cracking compared to large zeolite crystals obtained in the absence of CTAB.

3-Carboxylic Acid and Formyl-Derived Coumarins as Photoinitiators in Photo-Oxidation or Photo-Reduction Processes for Photopolymerization upon Visible Light: Photocomposite Synthesis and 3D Printing Applications.

In this paper, nine organic compounds based on the coumarin scaffold and different substituents were synthesized and used as high-performance photoinitiators for free radical photopolymerization (FRP) of meth(acrylate) functions under visible light irradiation using LED at 405 nm. In fact, these compounds showed a very high initiation capacity and very good polymerization profiles (both high rate of polymerization (Rp) and final conversion (FC)) using two and three-component photoinitiating systems based on coum/iodonium salt (0.1%/1% w/w) and coum/iodonium salt/amine (0.1%/1%/1% w/w/w), respectively. To demonstrate the efficiency of the initiation of photopolymerization, several techniques were used to study the photophysical and photochemical properties of coumarins, such as: UV-visible absorption spectroscopy, steady-state photolysis, real-time FTIR, and cyclic voltammetry. On the other hand, these compounds were also tested in direct laser write experiments (3D printing). The synthesis of photocomposites based on glass fiber or carbon fiber using an LED conveyor at 385 nm (0.7 W/cm2) was also examined.

Synthesis of Hierarchical Zeolites with Morphology Control: Plain and Hollow Spherical Beads of Silicalite-1 Nanosheets.

Binderless pure silica zeolites (zeosils) spheres and hollow spheres with a diameter of 20 µm composed of silicalite-1 nanosheets particles were prepared by pseudomorphic transformation of spherical silica beads using different temperatures (110, 130, and 150 °C) and treatment times (1-5 days) in order to adapt the local dissolution rate of silica to the crystallization rate of silicalite-1 nanosheets allowing to preserve the initial morphology of the silica beads. Fully crystalline beads of 20 µm were obtained at 110 °C for 5 days, whereas hollow spheres similar in size were synthesized at higher temperatures. The crystallization process seems to begin at the outer surface of the amorphous silica beads and spreads with the time in the interior of the beads leading to a dissolution of the inner amorphous part of the beads to create zeosil hollow spheres for the highest treatment temperatures (130 and 150 °C). The dissolution rate of the inner amorphous part of the beads increases by increasing the hydrothermal treatment temperature from 130 to 150 °C. The silicalite-1 beads synthesized at 110 °C for 5 days showed to be promising for rapid molecular decontamination by adsorbing n-hexane in larger amount than the silicalite-1 conventional big crystals in powder forms.

A Facile Approach for Doxorubicine Delivery in Cancer Cells by Responsive and Fluorescent Core/Shell Quantum Dots.

Biocompatible thermoresponsive copolymers based on 2-(2-methoxyethoxy) ethyl methacrylate (MEO2MA) and oligo (ethylene glycol) methacrylate (OEGMA) were grown from the surface of ZnO quantum dots (QDs) by surface initiated atom transfer radical polymerization with activators regenerated by electron transfer (SI-ARGET ATRP) in order to design smart and fluorescent core/shell nanosystems to be used toward cancer cells. Tunable lower critical solution temperature (LCST) values were obtained and studied in water and in culture medium. The complete efficiency of the process was demonstrated by the combination of spectroscopic and microscopic studies. The colloidal behavior of the ZnO/copolymer core/shell QDs in water and in physiological media with temperature was assessed. Finally, the cytotoxicity toward human colon cancer HT29 cells of the core/shell QDs was tested. The results showed that the polymer-capped QDs exhibited almost no toxicity at concentrations up to 12.5 µg.mL-1, while when loaded with doxorubicin hydrochloride (DOX), a higher cytotoxicity and a decreased HT29 cancer cell viability in a short time were observed.

Carbazole-based compounds as photoinitiators for free radical and cationic polymerization upon near visible light illumination.

Six new carbazole based compounds (Ca1-Ca6) are synthesized and proposed as high performance photoinitiators with iodonium salt (iod) and/or an amine (EDB) for both the free radical polymerization (FRP) of acrylates and the cationic polymerization (CP) of epoxides upon near UV and visible light exposure using light emitting diodes (LEDs) @385 nm and @405 nm. Excellent polymerization initiating abilities are found and high final reactive function conversions are acquired. A full picture of the involved photochemical mechanisms is given.

Efficient synthetic access to thermo-responsive core/shell nanoparticles.

Core/shell nanostructures based on silica, fluorescent ZnO quantum dots (QDs) and superparamagnetic Fe3O4 nanoparticles (NPs) were prepared and fully characterized by the combination of different techniques and the physical properties of the nanostructures were studied. We demonstrate the efficiency of the atom transfer radical polymerization with activators regenerated by electron transfer process to graft (co-)polymers of different structures and polarity at the surface of metal oxide NPs. The influence of the polymer chain configuration on the optical properties of the ZnO/polymer core/shell QDs was enlightened. Concerning the magnetic properties of the Fe3O4/polymer nanostructures, only the amount of the grafted polymer plays a role on the saturation magnetization of the NPs and no influence of the aggregation was evidenced. The simple and fast process described in this work is efficient for the grafting of copolymers from surfaces and the derived NPs display the combination of the physical properties of the core and the macromolecular behavior of the shell.

Novel Carbazole Skeleton-Based Photoinitiators for LED Polymerization and LED Projector 3D Printing.

Radical chemistry is a very convenient way to produce polymer materials. Here, an application of a particular photoinduced radical chemistry is illustrated. Seven new carbazole derivatives Cd1-Cd7 are incorporated and proposed as high performance near-UV photoinitiators for both the free radical polymerization (FRP) of (meth)acrylates and the cationic polymerization (CP) of epoxides utilizing Light Emitting Diodes LEDs @405 nm. Excellent polymerization-initiating abilities are found and high final reactive function conversions are obtained. Interestingly, these new derivatives display much better near-UV polymerization-initiating abilities compared to a reference UV absorbing carbazole (CARET 9H-carbazole-9-ethanol) demonstrating that the new substituents have good ability to red shift the absorption of the proposed photoinitiators. All the more strikingly, in combination with iodonium salt, Cd1-Cd7 are likewise preferred as cationic photoinitiators over the notable photoinitiator bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide (BAPO) for mild irradiation conditions featuring their remarkable reactivity. In particular their utilization in the preparation of new cationic resins for LED projector 3D printing is envisioned. A full picture of the included photochemical mechanisms is given.

Chemical composition, antibacterial and antioxidant activities of six essentials oils from the Alliaceae family.

Six essential oils (EOs) from the Alliaceae family, namely garlic (Allium sativum), onion (Allium cepa), leek (Allium porrum), Chinese chive (Allium tuberosum), shallot (Allium ascalonicum) and chive (Allium schoenoprasum) were characterized by GC and GC-MS and evaluated for their functional food properties. Antibacterial properties were tested on five food-borne pathogens: Two Gram-positive Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 19115) and three Gram-negative Salmonella Typhimurium (ATCC 14028), Escherichia coli (ATCC 8739) and Campylobacter jejuni (ATCC 33291) bacteria. Antioxidant and radical-scavenging properties were tested by means of Folin-Ciocalteu and 2,2-diphenyl-1-picrylhydrazyl (DPPH) assays. Garlic, Chinese chive and onion EOs had the highest antibacterial activity whereas shallot and leek EOs were the strongest antioxidants. Heating caused a decrease in the antioxidant activity of these Eos, as shown in the Total Polar Materials (TPM) test. Suggestions on relationships between chemical composition and biological activities are presented. Results show that the EOs could be of value in the food industry as alternatives to synthetic antioxidants.

Surface Thermodynamic Properties of Poly Lactic Acid by Inverse Gas Chromatography.

Poly lactic acid (PLA) is one of the most commonly used bio-derived thermoplastic polymers in 3D and 4D printing applications. The determination of PLA surface properties is of capital importance in 3D/4D printing technology. The surface thermodynamic properties of PLA polymers were determined using the inverse gas chromatography (IGC) technique at infinite dilution. The determination of the retention volume of polar and non-polar molecules adsorbed on the PLA particles filling the column allowed us to obtain the dispersive, polar, and Lewis's acid-base surface properties at different temperatures from 40 °C to 100 °C. The applied surface method was based on our recent model that used the London dispersion equation, the new chromatographic parameter function of the deformation polarizability, and the harmonic mean of the ionization energies of the PLA polymer and organic molecules. The application of this new method led to the determination of the dispersive and polar free surface energy of the adsorption of molecules on the polymeric material, as well as the glass transition and the Lewis acid-base constants. Four interval temperatures were distinguished, showing four zones of variations in the surface properties of PLA as a function of the temperature before and after the glass transition. The acid-base parameters of PLA strongly depend on the temperature. The accurate determination of the dispersive and polar surface physicochemical properties of PLA led to the work of adhesion of the polar organic solvents adsorbed on PLA. These results can be very useful for achieving reliable and functional 3D and 4D printed components.

A New Solution to the Grain Boundary Grooving Problem in Polycrystalline Thin Films When Evaporation and Diffusion Meet in Power Electronic Devices.

This paper constituted an extension of two previous studies concerning the mathematical development of the grain boundary grooving in polycrystalline thin films in the cases of evaporation/condensation and diffusion taken separately. The thermal grooving processes are deeply controlled by the various mass transfer mechanisms of evaporation-condensation, surface diffusion, lattice diffusion, and grain boundary diffusion. This study proposed a new original analytical solution to the mathematical problem governing the grain groove profile in the case of simultaneous effects of evaporation-condensation and diffusion in polycrystalline thin films by resolving the corresponding fourth-order partial differential equation ∂y∂t=C∂2y∂x2-B∂4y∂x4 obtained from the approximation ∂y∂x2≪1. The comparison of the new solution to that of diffusion alone proved an important effect of the coupling of evaporation and diffusion on the geometric characteristics of the groove profile. A second analytical solution based on the series development was also proposed. It was proved that changes in the boundary conditions of the grain grooving profile largely affected the different geometric characteristics of the groove profile.

SARS-CoV-2: Prediction of critical ionic amino acid mutations.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), that caused coronavirus disease 2019 (COVID-19), has been studied thoroughly, and several variants are revealed across the world with their corresponding mutations. Studies and vaccines development focus on the genetic mutations of the S protein due to its vital role in allowing the virus attach and fuse with the membrane of a host cell. In this perspective, we study the effects of all ionic amino acid mutations of the SARS-CoV-2 viral spike protein S1 when bound to Antibody CC12.1 within the SARS-CoV-2:CC12.1 complex model. Binding free energy calculations between SARS-CoV-2 and antibody CC12.1 are based on the Analysis of Electrostatic Similarities of Proteins (AESOP) framework, where the electrostatic potentials are calculated using Adaptive Poisson-Boltzmann Solver (APBS). The atomic radii and charges that feed into the APBS calculations are calculated using the PDB2PQR software. Our results are the first to propose in silico potential life-threatening mutations of SARS-CoV-2 beyond the present mutations found in the five common variants worldwide. We find each of the following mutations: K378A, R408A, K424A, R454A, R457A, K458A, and K462A, to play significant roles in the binding to Antibody CC12.1, since they are turned into strong inhibitors on both chains of the S1 protein, whereas the mutations D405A, D420A, and D427A, show to play important roles in this binding, as they are turned into mild inhibitors on both chains of the S1 protein.

Effect of amino functional groups on the surface properties and Lewis's acid base parameters of UiO-66(NH2) by inverse gas chromatography.

Amino-functionalized metal organic frameworks (MOFs) have attracted much attention for various applications such as carbon dioxide capture, water remediation and catalysis. The focus of this study is to determine the surface and Lewis's acid-base properties of UiO-66(NH2) crystals by the inverse gas chromatography (IGC) technique at infinite dilution. The latter was applied to evaluate the dispersive component of the surface energy γsd(T) by using thermal model and several molecular models. The obtained results proved that γsd(T) decreases when the temperature increases. The best results were achieved by using the thermal model that takes into account the effect of the temperature on the surface areas of the organic molecules. We also observed a decrease of the Gibbs surface free energy of adsorption by increasing the temperature of the different organic solvents. The polar interactions of UiO-66(NH2) were obtained by using the methods of Saint-Flour Papirer, Donnet et al., Brendlé-Papirer and the different molecular models. The Lewis's acid base constants KA and KD were further calculated by determining the different variables of adsorption of the probes on the solid surface and the obtained values were 1.07 and 0.45 for KA and KD respectively, with an acid-base ratio (KA/KD) of 2.38. These values showed the high acidic surface of the solid substrate; whereas, the values of the entropic acid base parameters, ωA, ωD and ωA/ωD respectively equal to 1.0×10-3, 3.8×10-4 and 2.73, also highlighted the important acidity of UiO-66-(NH2) surface. These important findings suggest that the surface defects (missing linkers and/or clusters) in UiO-66(NH2) are the main determining factor of the acid-base properties of UiO-66 based structures.

Thermal Fatigue Effect on the Grain Groove Profile in the Case of Diffusion in Thin Polycrystalline Films of Power Electronic Devices.

In a previous paper, we solved the partial differential equation of Mullins' problem in the case of the evaporation-condensation in electronic devices and gave an exact solution relative to the geometric profile of the grain boundary grooving when materials are submitted to thermal and mechanical solicitation and fatigue effect. In this new research, new modelling of the grain groove profile was proposed and new analytical expressions of the groove profile, the derivative and the groove depth were obtained in the case of diffusion in thin polycrystalline films by the resolution of the fourth differential equation formulated by Mullins that supposed y'2≪1. The obtained analytical solution gave more accurate information on the geometric characteristics of the groove that were necessary to study the depth and the width of the groove. These new findings will open a new way to study with more accuracy the problem of the evaporation-condensation combined to the diffusion phenomenon on the material surfaces with the help of the analytical solutions.

Correction to "Surface Thermal Behavior and RT CO Gas Sensing Application of Oligoacenaphthylene with p-Hydroxyphenylacetic Acid Composite".

[This corrects the article DOI: 10.1021/acsomega.2c03897.].

New Methodology to Study the Dispersive Component of the Surface Energy and Acid-Base Properties of Silica Particles by Inverse Gas Chromatography at Infinite Dilution.

A new methodology was proposed to determine the dispersive component of the surface energy ${\gamma}_s$ of a solid taking into account the effect of the temperature on the surface area of n-alkanes, methylene group (${a}_{- CH2-}$) and polar molecules, thus defeating the method used by Dorris-Gray Schultz et al. We determined the correct ${\gamma}_s$ of the surface energy, the specific free energy, enthalpy and entropy of adsorption of polar molecules as well as the acid base constants of silica particles with an excellent accuracy. We confirmed the dependence of the dispersive component of the surface energy on the variations of the surface areas of organic molecules used in IGC technique at infinite dilution. The specific properties of interactions of silica particles were determined. The new proposed model took into account this thermal effect. Obtained results proved that the other used IGC methods gave inaccurate values of the specific parameters of silica surface, except for the vapor pressure method that led to excellent results of the specific free energy, enthalpy and entropy of adsorption, and the acid-base constants of the silica particles.