In situ formation of ZnOx species for efficient propane dehydrogenation.

Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical1,2. The commercial PDH technologies utilizing Cr-containing (refs. 3,4) or Pt-containing (refs. 5-8) catalysts suffer from the toxicity of Cr(VI) compounds or the need to use ecologically harmful chlorine for catalyst regeneration9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnOx species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnOx species. For benchmarking purposes, the developed ZnO-silicalite-1 and an analogue of commercial K-CrOx/Al2O3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity.

Well-Defined Supported ZnOx Species: Synthesis, Structure, and Catalytic Performance in Nonoxidative Dehydrogenation of C3-C4 Alkanes.

ConspectusZinc oxide (ZnO) is a multipurpose material and finds its applications in various fields such as rubber manufacturing, medicine, food additives, electronics, etc. It has also been intensively studied in photocatalysis due to its wide band gap and environmental compatibility. Recently, heterogeneous catalysts with supported ZnOx species have attracted more and more attention for the dehydrogenation of propane (PDH) and isobutane (iBDH) present in shale/natural gas. The olefins formed in these reactions are key building blocks of the chemical industry. These reactions are also of academic importance for understanding the fundamentals of the selective activation of C-H bonds. Differently structured ZnOx species supported on zeolites, SiO2, and Al2O3 have been reported to be active for nonoxidative dehydrogenation reactions. However, the structure-activity-selectivity relationships for these catalysts remain elusive. The main difficulty stems from the preparation of catalysts containing only one kind of well-defined ZnOx species.In this Account, we describe the studies on PDH and iBDH over differently structured ZnOx species and highlight our approaches to develop catalysts with controllable ZnOx speciation relevant to their performance. Several methods, including (i) the in situ reaction of gas-phase metallic Zn atoms with OH groups on the surface of supports, (ii) one-pot hydrothermal synthesis, and (iii) impregnation/anchoring methods, have been developed/used for the tailored preparation of supported ZnOx species. The first method allows precise control of the molecular structure of ZnOx through the nature of the defective OH groups on the supports. Using this method, a series of ZnOx species ranging from isolated, binuclear to nanosized ZnOx have been successfully generated on different SiO2-based or ZrO2-based supports as demonstrated by complementary ex/in situ characterization techniques. Based on kinetic studies and detailed characterization results, the intrinsic activity (Zn-related turnover frequency) of ZnOx was found to depend on its speciation. It increases with an increasing number of Zn atoms in a ZnmOn cluster from 1 to a few atoms (less than 10) and then decreases strongly for ZnOx nanoparticles. The latter promote the formation of undesired C1-C2 hydrocarbons and coke, resulting in lower propene selectivity in comparison with the catalysts containing only ZnOx species ranging from isolated to subnanometer ZnmOn clusters. In addition, the strategy for improving the thermal stability of ZnOx species and the consequences of mass-transport limitations for DH reactions were also elucidated. The results obtained allowed us to establish the fundamentals for the targeted preparation of well-structured ZnOx species and the relationships between their structures and the DH performance. This knowledge may inspire further studies in the field of C-H bond activation and other reactions, in which ZnOx species act as catalytically active sites or promoters, such as the dehydroaromatization of light alkanes and the hydrogenation of CO2 to methanol.

Formation of a Porous Crystalline Mg1-xAl2Oy Overlayer on Metal Catalysts via Controlled Solid-State Reactions for High-temperature Stable Catalysis.

Catalyst deactivation by sintering and coking is a long-standing issue in metal-catalyzed harsh high-temperature hydrocarbon reactions. Ultrathin oxide coatings of metal nanocatalysts have recently appeared attractive to address this issue, while the porosity of the overlayer is difficult to control to preserve the accessibility of embedded metal nanoparticles, thus often leading to a large decrease in activity. Here, we report that a nanometer-thick alumina coating of MgAl2O4-supported metal catalysts followed by high-temperature reduction can transform a nonporous amorphous alumina overlayer into a porous Mg1-xAl2Oy crystalline spinel structure with a pore size of 2-3 nm and weakened acidity. The high porosity stems from the restrained Mg migration from the MgAl2O4 support to the alumina overlayer through solid-state reactions at high temperatures. The resulting Ni/MgAl2O4 and Pt/MgAl2O4 catalysts with a porous crystalline Mg1-xAl2Oy overlayer achieved remarkably high stability while preserving much higher activity than the corresponding alumina-coated Ni and Pt catalysts on MgO and Al2O3 supports in the reactions of dry reforming of methane and propane dehydrogenation, respectively.

Synergistic construction of bifunctional and stable Pt/HZSM-5-based catalysts for efficient catalytic cracking of n-butane.

Efficient conversion of light alkanes is of essential significance for enhancing the utilization efficiency of resources and exploring the activation and evolution regulation of C-C and C-H bonds in stable molecules. The processes are often executed with catalysts under harsh conditions. The olefin yield and metal stability have been the long-standing concerns. Herein, we report a facile strategy of constructing a bifunctional Pt/HZSM-5-based catalyst by two-step atomic layer deposition (ALD) to achieve a high light olefin formation rate of 0.48 mmol gcat-1·min-1 in the catalytic cracking of n-butane at 600 °C, which is ∼2.2 times higher than that of the conventional Pt/HZSM-5 catalyst (0.22 mmol gcat-1·min-1). Moreover, the bifunctional Pt/HZSM-5-based catalyst exhibited outstanding recyclability and excellent metal stability against sintering in comparison with conventional Pt/HZSM-5. Detailed microscopic and spectroscopic characterization studies demonstrate that the metal oxide (TiO2 or Al2O3) coating not only prevents the metal from high-temperature sintering, but also regulates the proportion of coordinately unsaturated platinum surface atoms. Theoretical calculations further confirm the preference of nucleation of TiO2 or Al2O3 on coordinately unsaturated platinum sites, which in turn modulates the bifunctional dehydrogenation-cracking pathway to improve the olefin formation rate.

ZnO Nanoparticles Encapsulated in Nitrogen-Doped Carbon Material and Silicalite-1 Composites for Efficient Propane Dehydrogenation.

Non-oxidative propane dehydrogenation (PDH) is an attractive reaction from both an industrial and a scientific viewpoint because it allows direct large-scale production of propene and fundamental analysis of C-H activation respectively. The main challenges are related to achieving high activity, selectivity, and on-stream stability of environment-friendly and cost-efficient catalysts without non-noble metals. Here, we describe an approach for the preparation of supported ultrasmall ZnO nanoparticles (2-4 nm, ZnO NPs) for high-temperature applications. The approach consists of encapsulation of NPs into a nitrogen-doped carbon (NC) layer in situ grown from zeolitic imidazolate framework-8 on a Silicalite-1 support. The NC layer was established to control the size of ZnO NPs and to hinder their loss to a large extent at high temperatures. The designed catalysts exhibited high activity, selectivity, and on-stream stability in PDH. Propene selectivity of about 90% at 44.4% propane conversion was achieved at 600°C after nearly 6 h on stream.

Promoted photoelectrocatalytic hydrogen evolution of a type II structure via an Al2O3 recombination barrier layer deposited using atomic layer deposition.

Constructing a semiconductor type II structure is an effective way to enhance the photogenerated charge separation efficiency. The separation and migration of interfacial photogenerated carriers is a key factor, which influences the photocatalytic activity. In this study, a conformal Al2O3 recombination barrier layer was introduced at the interface between TiO2 nanowires and CdSe nanoparticles, and the application of this composite in photoelectrocatalytic (PEC) hydrogen production was explored. Under visible-light irradiation, the photocurrent response and PEC hydrogen evolution performance increased step-by-step from TiO2 to the Al2O3/TiO2 and CdSe/Al2O3/TiO2 nanowire arrays. Moreover, the H2 evolution rate of CdSe/Al2O3/TiO2 was much higher than that of a different configuration, Al2O3/CdSe/TiO2. The enhanced PEC hydrogen evolution performance was attributed to the prevention of the interfacial charge recombination caused by the Al2O3 recombination barrier layer. Our results may shed new light on developing novel and highly efficient photocatalysts using rational interface design.

Simultaneous realization of high catalytic activity and stability for catalytic cracking of n-heptane on highly exposed (010) crystal planes of nanosheet ZSM-5 zeolite.

Nanosheet ZSM-5 zeolite with highly exposed (010) crystal planes demonstrates high reactivity and good anti-coking stability for the catalytic cracking of n-heptane, which is attributed to the synergy of high external surface area and acid sites, fully accessible channel intersection acid sites, and hierarchical porosity caused by the unique morphology.