RESUMO
STATEMENT OF PROBLEM: Resin-bonded prostheses, including interim resin-bonded prostheses, are effective in preserving tooth structure compared with other types of fixed dental prostheses for the replacement of missing teeth. However, loss of retention remains a notable concern with these types of prostheses. PURPOSE: The purpose of this in vitro study was to investigate the influence of glass-ceramic type, resin type, and surface finish on the shear bond strength (SBS) to the CAD-CAM ceramics used to fabricate interim resin-bonded prostheses. MATERIAL AND METHODS: Eighty 10×2-mm glass-ceramic disks were fabricated by using a diamond saw (IsoMet 1000), 40 from feldspathic porcelain blocks (Vita Mark II) and 40 from lithium disilicate blocks (IPS e.max CAD). Half of the specimens in each group were left with a dull or matte surface finish after cutting, while the other half were glazed with an add-on glaze (VitaAkzento Plus Glaze Spray and IPS e.max CAD Glaze Spray, respectively). The disks were mounted in acrylic resin, and each group was subdivided into 2, with 1 receiving a photopolymerized resin cement (RelyX Veneer) and the other receiving a flowable composite resin (Filtek Supreme Ultimate Flow) to form 2.38×2-mm cylinders. SBS was determined using a universal testing machine (Instron 4411) in accordance with the International Organization for Standardization (ISO) 29022:2013 standard, and failure modes were analyzed by using a stereomicroscope with ×40 magnification. The data were analyzed with a 3-way analysis of variance and Tukey post hoc analysis. The chi-squared test was used to analyze the failure mode (α=.05 for all tests). RESULTS: Ceramic type, resin type, and surface finish significantly impacted SBS (P<.001, P=.003, P<.001, respectively). Lithium disilicate showed higher SBS than feldspathic porcelain, and flowable composite resin exhibited higher SBS than resin cement. Glazed surfaces displayed lower SBS compared with the dull or matte surfaces. The combinations among the 3 materials also impacted SBS (P=.03). In addition, the combinations between ceramic type and surface finish affected SBS (P<.001), regardless of resin cement type. No other combinations affected the SBS (P>.05). The mode of failure was different among the groups (P<.001). In comparison with all other groups, cohesive failures were most prevalent in feldspathic porcelain with a dull or matte surface finish, regardless of the resin type used. CONCLUSIONS: The SBS to glass-ceramics was influenced by ceramic material, resin cement type, and surface finish. Flowable composite resin showed higher SBS than resin cement. A dull or matte surface finish exhibited greater bond strength than a glazed surface. Lithium disilicate had higher SBS than feldspathic porcelain.
Assuntos
Colagem Dentária , Porcelana Dentária , Porcelana Dentária/química , Cimentos de Resina/uso terapêutico , Cimentos de Resina/química , Propriedades de Superfície , Cerâmica/uso terapêutico , Cerâmica/química , Desenho Assistido por ComputadorRESUMO
OBJECTIVES: Different static computer-assisted implant surgery (sCAIS) systems are available that are based on different design concepts. The objective was to assess seven different systems in a controlled environment. MATERIALS AND METHODS: Each n = 20 implants were placed in identical mandible replicas (total n = 140). The systems utilized either drill-handles (group S and B), drill-body guidance (group Z and C), had the key attached to the drill (group D and V), or combined different design concepts (group N). The achieved final implant position was digitized utilizing cone-beam tomography and compared with the planned position. The angular deviation was defined as the primary outcome parameter. The means, standard deviation, and 95%-confidence intervals were analyzed statistically with 1-way ANOVA. A linear regression model was applied with the angle deviation as predictor and the sleeve height as response. RESULTS: The overall angular deviation was 1.94 ± 1.51°, the 3D-deviation at the crest 0.54 ± 0.28 mm, and at the implant tip 0.67 ± 0.40 mm, respectively. Significant differences were found between the tested sCAIS systems. The angular deviation ranged between 0.88 ± 0.41° (S) and 3.97 ± 2.01° (C) (p < .01). Sleeve heights ≤4 mm are correlated with higher angle deviations, sleeve heights ≥5 mm with lower deviations from the planned implant position. CONCLUSIONS: Significant differences were found among the seven tested sCAIS systems. Systems that use drill-handles achieved the highest accuracy, followed by the systems that attach the key to the drill. The sleeve height appears to impact the accuracy.
Assuntos
Implantes Dentários , Cirurgia Assistida por Computador , Implantação Dentária Endóssea/métodos , Desenho Assistido por Computador , Tomografia Computadorizada de Feixe Cônico , Cirurgia Assistida por Computador/métodos , Imageamento TridimensionalRESUMO
A Bayesian approach is proposed that unifies Gaussian Bayesian network constructions and comparisons between two networks (identical or differential) for data with graph ordering unknown. When sampling graph ordering, to escape from local maximums, an adjusted single queue equi-energy algorithm is applied. The conditional posterior probability mass function for network differentiation is derived and its asymptotic proposition is theoretically assessed. Simulations are used to demonstrate the approach and compare with existing methods. Based on epigenetic data at a set of DNA methylation sites (CpG sites), the proposed approach is further examined on its ability to detect network differentiations. Findings from theoretical assessment, simulations, and real data applications support the efficacy and efficiency of the proposed method for network comparisons.
RESUMO
5-Hydroxymethylcytosine (5hmC) arises from the oxidation of 5-methylcytosine (5mC) by Fe2+ and 2-oxoglutarate-dependent 10-11 translocation (TET) family proteins. Substantial levels of 5hmC accumulate in many mammalian tissues, especially in neurons and embryonic stem cells, suggesting a potential active role for 5hmC in epigenetic regulation beyond being simply an intermediate of active DNA demethylation. 5mC and 5hmC undergo dynamic changes during embryogenesis, neurogenesis, hematopoietic development, and oncogenesis. While methods have been developed to map 5hmC, more efficient approaches to detect 5hmC at base resolution are still highly desirable. Herein, we present a new method, Jump-seq, to capture and amplify 5hmC in genomic DNA. The principle of this method is to label 5hmC by the 6- N3-glucose moiety and connect a hairpin DNA oligonucleotide carrying an alkyne group to the azide-modified 5hmC via Huisgen cycloaddition (click) chemistry. Primer extension starts from the hairpin motif to the modified 5hmC site and then continues to "land" on genomic DNA. 5hmC sites are inferred from genomic DNA sequences immediately spanning the 5-prime junction. This technology was validated, and its utility in 5hmC identification was confirmed.
Assuntos
5-Metilcitosina/análogos & derivados , Genômica , 5-Metilcitosina/metabolismo , DNA/química , DNA/genética , DNA/metabolismo , Técnicas de Amplificação de Ácido NucleicoRESUMO
This article focuses on the clustering problem based on Dirichlet process (DP) mixtures. To model both time invariant and temporal patterns, different from other existing clustering methods, the proposed semi-parametric model is flexible in that both the common and unique patterns are taken into account simultaneously. Furthermore, by jointly clustering subjects and the associated variables, the intrinsic complex shared patterns among subjects and among variables are expected to be captured. The number of clusters and cluster assignments are directly inferred with the use of DP. Simulation studies illustrate the effectiveness of the proposed method. An application to wheal size data is discussed with an aim of identifying novel temporal patterns among allergens within subject clusters.
RESUMO
Background noise in cluster analyses can potentially mask the true underlying patterns. To tease out patterns uniquely to certain populations, a Bayesian semi-parametric clustering method is presented. It infers and adjusts background noise. The method is built upon a mixture of the Dirichlet process and a point mass function. Simulations demonstrate the effectiveness of the proposed method. The method is then applied to analyze a longitudinal data set on allergic sensitization and asthma status.
RESUMO
Introduction: Attachment loss due to periodontal diseases is associated with functional limitations as well as physical pain and psychological discomfort, which may lead to a reduced quality of life. The purpose of this study is to determine if the oral health status, specifically the periodontal status, influences oral health-related quality of life. Materials and methods: Survey data were collected in a US dental school clinical setting in a cross-sectional study. Quality of life related to oral health was assessed with the Oral Health Impact Profile-49 (OHIP-49). In addition, DMFT index, periodontal status, and health literacy scores (dental and medical health literacy) were recorded, and the data of n = 97 subjects were statistically analyzed. Results: The DMFT index of the study population was 14.98 ± 6.21 (D: 4.72 ± 4.77; M: 3.19 ± 3.46; F: 7.12 ± 4.62). Of the subjects, 44% were identified as periodontitis cases. These periodontitis cases demonstrated significantly higher OHIP-49 scores (66.93 ± 30.72) than subjects without signs of periodontal diseases (NP) (32.40 ± 19.27, p < 0.05). There was also a significant difference between NP patients and patients with gingivitis (66.24 ± 46.12, p < 0.05). It was found that there was a statistically significant difference between Stage 3 (severe) periodontitis and periodontal health (p = 0.003). Pearson correlations were completed, and positive relationships were found with OHIP-49 and DMFT (0.206, p < 0.05), and periodontal risk self-assessment (0.237, p < 0.05). Age [odds ratio (OR) 4.46], smoking (OR 2.67), and the presence of mobile teeth (OR 2.96) are associated with periodontitis. Conclusions: Periodontal diseases may negatively impact the oral health-related quality of life. Patients suffering from periodontitis also showed more missing teeth, which might influence function. Age and smoking are associated with a higher prevalence of periodontitis. A good general health literacy was no guarantee for having an adequate oral literacy.
RESUMO
INTRODUCTION: Nickel-titanium rotary endodontic files have been commercially available for decades, but more recent innovations have introduced heat-treated and surface-treated files. This study investigated the corrosion properties of various nickel-titanium files in normal saline and sodium hypochlorite (NaOCl). METHODS: Ten different file brands of size 40 with a 0.04 taper were subjected to electrochemical testing in 0.9% NaCl (saline) and 5.25% NaOCl at room temperature. The Open Circuit Potential (OCP) was observed for 1 hour followed by a cyclic polarization test from -300 to 700 mV and back to -300 mV (vs OCP). Nonparametric ANOVA and a pairwise comparison (P < .05) were used for statistical analysis of the OCP at 1 hour and the corrosion current (Icorr) obtained via the cyclic polarization test. RESULTS: Significant differences (P < .05) were found between files with respect to OCP and Icorr in both solutions. Nine files exhibited significantly greater (P < .05) Icorrs in NaOCl than in saline. Conversely, pitting corrosion was observed in the saline solution but not NaOCl. Weak and/or moderate correlations existed between OCP and Icorr measures in the 2 solutions. CONCLUSION: Significant differences in electrochemical properties were observed among the 10 brands of files. Overall, there was not a clear trend between conventional, heat-treated, or surface-treated files among OCP or Icorr in either solution.
Assuntos
Níquel , Preparo de Canal Radicular , Titânio , Níquel/química , Titânio/química , Corrosão , Preparo de Canal Radicular/instrumentação , Hipoclorito de Sódio/química , Instrumentos Odontológicos , Teste de Materiais , Eletroquímica , Técnicas Eletroquímicas , Ligas Dentárias/química , Propriedades de SuperfícieRESUMO
This article proposes a Bayesian computing algorithm to infer Gaussian directed acyclic graphs (DAG's). It has the ability of escaping local modes and maintaining adequate computing speed compared to existing methods. Simulations demonstrated that the proposed algorithm has low false positives and false negatives in comparison to an algorithm applied to DAG's. We applied the algorithm to an epigenetic data set to infer DAG's for smokers and non-smokers.
RESUMO
Boolean networks are a simple but efficient model for describing gene regulatory systems. A number of algorithms have been proposed to infer Boolean networks. However, these methods do not take full consideration of the effects of noise and model uncertainty. In this paper, we propose a full Bayesian approach to infer Boolean genetic networks. Markov chain Monte Carlo algorithms are used to obtain the posterior samples of both the network structure and the related parameters. In addition to regular link addition and removal moves, which can guarantee the irreducibility of the Markov chain for traversing the whole network space, carefully constructed mixture proposals are used to improve the Markov chain Monte Carlo convergence. Both simulations and a real application on cell-cycle data show that our method is more powerful than existing methods for the inference of both the topology and logic relations of the Boolean network from observed data.