RESUMO
We propose a compact fiber-optic sensor for in situ and continuous turbidity monitoring, based on surface optical scattering of polarized evanescent waves from targeted particles. The sensor is composed of a tilted fiber Bragg grating (TFBG) packaged inside a microfluidic capillary. The transmission spectrum of the TFBG provides a fine comb of narrow cladding resonances that are highly sensitive to the turbidity due to the localized light scattering of polarized evanescent waves from the microparticles near the fiber surface (as opposed to traditional bulk/volumetric turbidity measurement). We also propose a transmission spectral area interrogation method and quantify the repeatable correlation between the surface turbidity and the optical spectral area response. We show that the maximum sensitive turbidity response is achieved when the wavelength of the sensing cladding resonance matches the size of surrounding solid particles.
RESUMO
In this work, we report about high energy and various solitons' operation by using high-efficiency topological insulator bismuth telluride (Bi2Te3) nanofilms as broadband saturable absorbers in the passively mode-locked Er-doped fiber laser. The Bi2Te3 film was successfully synthesized by chemical vapor deposition (CVD). Excellent characteristics of the dark-bright pulse pairs, bright pulses, and multiharmonics have been investigated experimentally by adjusting the polarization state. At the same time, the maximum average output power was 40.18 mW, and the single-pulse energy was 20.91 nJ. As we all know, it is the various solitons of the first generation with large pulse energy in an Er-doped fiber laser with Bi2Te3 as saturable absorber. The experimental results show that CVD Bi2Te3 can be used as an excellent candidate in mode-locked fiber lasers.
RESUMO
In this study, the output energy in topological insulators (TIs)-based Erbium-doped fiber laser (EDFL) was improved using two strategies: bidirectional pumped laser cavity and saturable absorber (SA) with high damage threshold and large modulation depth. Using the chemical vapor deposition (CVD) method, Bismuth Selenide (Bi2Se3) film was synthesized and improved to a SA. Employing this CVD-Bi2Se3 SA in an EDFL, bright and bright-dark soliton operations were achieved. The average output power/pulse energy was 82.6â mW/48.3 nJ and 81.2â mW/47.5 nJ, respectively. The results demonstrate that CVD-Bi2Se3 can act as an excellent performance material to improve output power performance in TISA-based EDFL.
RESUMO
We reported on the generation of pulse bunch and large-energy dark pulses in a mode-locked ytterbium-doped linear-cavity fiber laser based on Bi2Se3 as a saturable absorber (SA). Bi2Se3 nanosheets were successfully synthesized by the chemical vapor deposition (CVD) method and transferred to the end facet of a fiber connector for the proposed SA. Its saturation intensity and modulation depth were measured to be 52 MW/cm2 and 14.5%, respectively. By inserting the Bi2Se3-based SA into the Yb-doped all-fiber linear cavity, stable pulse bunches were observed. In addition, dark soliton operation with a maximum average output power of 32.6 mW and a pulse energy of 61.8 nJ were also achieved. To the best of our knowledge, this is the first demonstration of a dark soliton within a linear cavity with much larger pulse energy than previous works. Our study fully indicated that CVD-Bi2Se3 could be an excellent SA for achieving large-energy pulse operations.
RESUMO
In this study, a high-energy noise-like mode-locked Yb-doped fiber laser in a linear cavity was achieved with SnS2-polyvinyl alcohol film as the saturable absorber. In addition, the nonlinear saturable absorption characteristics of the SnS2 were investigated experimentally. The saturation intensity and modulation depth were about 6.01 MW/cm2 and 8.68%, respectively. Under pump power of 422 mW, stable noise-like mode-locked operation with a maximum output power and largest single pulse energy of 9.50 mW and 18.1 nJ, respectively, was obtained. To the best of our knowledge, this study is the first to observe and experimentally investigate noise-like operation in a linear laser cavity. Our study may provide some valuable design guidelines for noise-like operation and create new directions for advanced photonic devices based on SnS2.
RESUMO
In this paper, a novel high-energy mode-locked fiber laser based on the nonlinear polarization rotation (NPR) technique is presented to generate 331 nJ rectangular pulses. When pump power was 2659 mW, the maximum output power would be 102.3 mW; the maximum peak power was 41.74 W under the pump power of 1766 mW. In this study, the use of two homemade laser diodes and other common fiber devices was a vital step to achieve the low-cost and high-efficiency NPR mode-locked fiber laser. Based on these results, a novel approach could be developed to realize a high-energy rectangular pulse and promote the practical applications of the NPR mode-locked fiber laser in the field of ultrafast photonics.
RESUMO
Lithium (Li) dendrite growth significantly deteriorates the performance and shortens the operation life of lithium metal batteries. Capturing the intricate dynamics of surface localized and rapid mass transport at the electrolyte-electrode interface of lithium metal is essential for the understanding of the dendrite growth process, and the evaluation of the solutions mitigating the dendrite growth issue. Here we demonstrate an approach based on an ultrasensitive tilted fiber Bragg grating (TFBG) sensor which is inserted close to the electrode surface in a working lithium metal battery, without disturbing its operation. Thanks to the superfine optical resonances of the TFBG, in situ and rapid monitoring of mass transport kinetics and lithium dendrite growth at the nanoscale interface of lithium anodes have been achieved. Reliable correlations between the performance of different natural/artificial solid electrolyte interphases (SEIs) and the time-resolved optical responses have been observed and quantified, enabling us to link the nanoscale ion and SEI behavior with the macroscopic battery performance. This new operando tool will provide additional capabilities for parametrization of the batteries' electrochemistry and help identify the optimal interphases of lithium metal batteries to enhance battery performance and its safety.
RESUMO
Operando monitoring of complex physical and chemical activities inside rechargeable lithium-ion batteries during thermal runaway is critical to understanding thermal runaway mechanisms and giving early warning of safety-related failure. However, most existing sensors cannot survive during such extremely hazardous thermal runaway processes (temperature up to 500 °C accompanied by fire and explosion). To address this, we develop a compact and multifunctional optical fiber sensor (12 mm in length and 125 µm in diameter) capable of insertion into commercial 18650 cells to continuously monitor internal temperature and pressure effects during cell thermal runaway. We observe a stable and reproducible correlation between the cell thermal runaway and the optical response. The sensor's signal shows two internal pressure peaks corresponding to safety venting and initiation of thermal runaway. Further analysis reveals that a scalable solution for predicting imminent thermal runaway is the detection of the abrupt turning range of the differential curves of cell temperature and pressure, which corresponds to an internal transformation between the cell reversible and irreversible reactions. By raising an alert even before safety venting, this new operando measurement tool can provide crucial capabilities in cell safety assessment and warning of thermal runaway.
RESUMO
Understanding ion transport kinetics and electrolyte-electrode interactions at electrode surfaces of batteries in operation is essential to determine their performance and state of health. However, it remains a challenging task to capture in real time the details of surface-localized and rapid ion transport at the microscale. To address this, a promising approach based on an optical fiber plasmonic sensor capable of being inserted near the electrode surface of a working battery to monitor its electrochemical kinetics without disturbing its operation is demonstrated using aqueous Zn-ion batteries as an example. The miniature and chemically inert sensor detects perturbations of surface plasmon waves propagating on its surface to rapidly screen localized electrochemical events on a sub-µm-scale thickness adjacent to the electrode interface. A stable and reproducible correlation between the real-time ion insertions over charge-discharge cycles and the optical plasmon response has been observed and quantified. This new operando measurement tool will provide crucial additional capabilities to battery monitoring methods and help guide the design of better batteries with improved electro-chemistries.
RESUMO
In this study, a double-end pumped high-power passively mode-locked erbium-doped fiber laser (EDFL) was realized by employing a few-layered In2Se3 flakes as a saturable absorber (SA). Herein, the uniform large-scale In2Se3 flakes were synthesized by the physical vapor deposition (PVD) method. The PVD-In2Se3 SA exhibited a remarkable damage threshold of higher than 24 mJ/cm2. Meanwhile, the PVD-In2Se3 SA had a modulation depth and saturable intensity of 18.75% and 6.8 MW/cm2, respectively. Based on the In2Se3 SA, the stable bright pulses emitting at 1559.4 nm with an average output power/pulse energy/pulse duration of 122.4 mW/5.8 nJ/14.4 ns were obtained successfully. To our knowledge, 122.4 mW was the new major breakthrough of mode-locked Er-doped fiber lasers. In addition, this is the first demonstration of the dark-bright pulse pair generation based on In2Se3 SA. The maximum average output power of the dark-bright pulse reached 121.2 mW, which also showed significant enhancement in comparison with previous works. Our excellent experiment results fully prove the superiority of our experimental design scheme and indicate that the PVD-In2Se3 could operate as a promising highly-nonlinear photonic material for a high-power fiber laser.
RESUMO
We demonstrate the generation of versatile mode-locked operations in an Er-doped fiber laser with an indium tin oxide (ITO) saturable absorber (SA). As an epsilon-near-zero material, ITO has been only used to fashion a mode-locked fiber laser as an ITO nanoparticle-polyvinyl alcohol SA. However, this type of SA cannot work at high power or ensure that the SA materials can be transmitted by the light. Thus, we covered the end face of a fiber with a uniform ITO film using the radio frequency magnetron sputtering technology to fabricate a novel ITO SA. Using this new type of SA, single-wavelength pulses, dual-wavelength pulses, and triple-wavelength multi-pulses were achieved easily. The pulse durations of these mode-locked operations were 1.67, 6.91, and 1 ns, respectively. At the dual-wavelength mode-locked state, the fiber laser could achieve an output power of 2.91 mW and a pulse energy of 1.48 nJ. This study reveals that such a proposed film-type ITO SA has excellent nonlinear absorption properties, which can promote the application of ITO film for ultrafast photonics.