Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Angew Chem Int Ed Engl ; 62(25): e202302394, 2023 Jun 19.
Artigo em Inglês | MEDLINE | ID: mdl-37078401

RESUMO

Plasmon-enhanced electrocatalysis (PEEC), based on a combination of localized surface plasmon resonance excitation and an electrochemical bias applied to a plasmonic material, can result in improved electrical-to-chemical energy conversion compared to conventional electrocatalysis. Here, we demonstrate the advantages of nano-impact single-entity electrochemistry (SEE) for investigating the intrinsic activity of plasmonic catalysts at the single-particle level using glucose electrooxidation and oxygen reduction on gold nanoparticles as model reactions. We show that in conventional ensemble measurements, plasmonic effects have minimal impact on photocurrents. We suggest that this is due to the continuous equilibration of the Fermi level (EF ) of the deposited gold nanoparticles with the EF of the working electrode, leading to fast neutralization of hot carriers by the measuring circuit. The photocurrents detected in the ensemble measurements are primarily caused by photo-induced heating of the supporting electrode material. In SEE, the EF of suspended gold nanoparticles is unaffected by the working electrode potential. As a result, plasmonic effects are the dominant source of photocurrents under SEE experimental conditions.


Assuntos
Ouro , Nanopartículas Metálicas , Eletroquímica , Ressonância de Plasmônio de Superfície , Catálise
2.
Nano Lett ; 21(2): 1083-1089, 2021 Jan 27.
Artigo em Inglês | MEDLINE | ID: mdl-33416331

RESUMO

Plasmonic materials have optical cross sections that exceed by 10-fold their geometric sizes, making them uniquely suitable to convert light into electrical charges. Harvesting plasmon-generated hot carriers is of interest for the broad fields of photovoltaics and photocatalysis; however, their direct utilization is limited by their ultrafast thermalization in metals. To prolong the lifetime of hot carriers, one can place acceptor materials, such as semiconductors, in direct contact with the plasmonic system. Herein, we report the effect of operating temperature on hot electron generation and transfer to a suitable semiconductor. We found that an increase in the operation temperature improves hot electron harvesting in a plasmonic semiconductor hybrid system, contrasting what is observed on photodriven processes in nonplasmonic systems. The effect appears to be related to an enhancement in hot carrier generation due to phonon coupling. This discovery provides a new strategy for optimization of photodriven energy production and chemical synthesis.

3.
Nat Mater ; 19(12): 1312-1318, 2020 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-32719510

RESUMO

A fundamental understanding of hot-carrier dynamics in photo-excited metal nanostructures is needed to unlock their potential for photodetection and photocatalysis. Despite numerous studies on the ultrafast dynamics of hot electrons, so far, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. Here, we report ultrafast (t < 200 fs) hot-hole injection from Au nanoparticles into the valence band of p-type GaN. The removal of hot holes from below the Au Fermi level is observed to substantially alter the thermalization dynamics of hot electrons, reducing the peak electronic temperature and the electron-phonon coupling time of the Au nanoparticles. First-principles calculations reveal that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles by modulating the electronic structure of the metal on timescales commensurate with electron-electron scattering. These results advance our understanding of hot-hole dynamics in metal-semiconductor heterostructures and offer additional strategies for manipulating the dynamics of hot carriers on ultrafast timescales.

4.
Nano Lett ; 20(11): 8220-8228, 2020 Nov 11.
Artigo em Inglês | MEDLINE | ID: mdl-33095592

RESUMO

Plasmon hot carriers are interesting for photoredox chemical synthesis but their direct utilization is limited by their ultrafast thermalization. Therefore, they are often transferred to suitable accepting materials that expedite their lifetime. Solid-state photocatalysts are technologically more suitable than their molecular counterparts, but their photophysical processes are harder to follow due to the absence of clear optical fingerprints. Herein, the journey of hot electrons in a solid-state multimetallic photocatalyst is revealed by a combination of ultrafast visible and infrared spectroscopy. Dynamics showed that electrons formed upon silver plasmonic excitation reach the gold catalytic site within 700 fs and the electron flow could also be reversed. Gold is the preferred site until saturation of its 5d band occurs. Silver-plasmon hot electrons increased the rate of nitrophenol reduction 16-fold, confirming the preponderant role of hot electrons in the overall catalytic activity and the importance to follow hot carriers' journeys in solid-state photosystems.

5.
Langmuir ; 34(37): 11121-11125, 2018 09 18.
Artigo em Inglês | MEDLINE | ID: mdl-30169040

RESUMO

The work presents a full physicochemical characterization of sulfonated cellulose beads prepared from Cladophora nanocellulose intended for use in biological systems. 2,3-Dialdehyde cellulose (DAC) beads were sulfonated, and transformation of up to 50% of the aldehyde groups was achieved, resulting in highly charged and porous materials compared to the compact surface of the DAC beads. The porosity could be tailored by adjusting the degree of sulfonation, and a subsequent reduction of the aldehyde groups to hydroxyl groups maintained the bead structure without considerable alteration of the surface properties. The thermal stability of the DAC beads was significantly increased with the sulfonation and reduction reactions. Raman spectroscopy also showed to be a useful technique for the characterization of sulfonated cellulose materials.

6.
Free Radic Biol Med ; 168: 110-116, 2021 05 20.
Artigo em Inglês | MEDLINE | ID: mdl-33798616

RESUMO

Nitrones derived from natural antioxidants are emerging as highly specific therapeutics against various human diseases, including stroke, neurodegenerative pathologies, and cancer. However, the development of useful pseudo-natural nitrones requires the judicious choice of a secondary metabolite as the precursor. Betalains are nitrogen-containing natural pigments that exhibit marked antioxidant capacity and pharmacological properties and, hence, are ideal candidates for designing multifunctional nitrones. In this work, we describe the semisynthesis and properties of a biocompatible and antioxidant betalain-nitrone called OxiBeet. This bio-based compound is a better radical scavenger than ascorbic acid, gallic acid, and most non-phenolic antioxidants and undergoes concerted proton-coupled electron transfer. The autoxidation of OxiBeet produces a persistent nitroxide radical, which, herein, is studied via electron paramagnetic resonance spectroscopy. In addition, femtosecond transient absorption spectroscopy reveals that excited state formation is not required for the oxidation of OxiBeet. The results are compared with those obtained using betanin, a natural betalain, and pBeet, the imine analog of OxiBeet. The findings of this study will enable the development of antioxidant and spin-trap nitrones based on the novel N-oxide 1,7-diazaheptamethinium scaffold and betalain dyes with enhanced hydrolytic stability in aqueous alkaline media.


Assuntos
Antioxidantes , Óxidos de Nitrogênio , Espectroscopia de Ressonância de Spin Eletrônica , Humanos
7.
J Phys Chem Lett ; 10(11): 3140-3146, 2019 Jun 06.
Artigo em Inglês | MEDLINE | ID: mdl-31117685

RESUMO

We have successfully investigated the simultaneous injection of hot electrons and holes upon excitation of gold localized surface plasmon resonance (LSPR). The studies were performed on all-solid-state plasmonic system composed of titanium dioxide (TiO2)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) p-n junctions with gold nanoparticles (Au NPs). The study revealed that both charge carriers are transferred within 200 fs to the respective charge acceptors, exhibiting a free carrier transport behavior. We also confirmed that the transfer of charge carriers are accompanied by change in the initial relaxation dynamics of Au NPs.

8.
J Phys Chem Lett ; 10(8): 1743-1749, 2019 Apr 18.
Artigo em Inglês | MEDLINE | ID: mdl-30920838

RESUMO

Hydrated electrons are important in radiation chemistry and charge-transfer reactions, with applications that include chemical damage of DNA, catalysis, and signaling. Conventionally, hydrated electrons are produced by pulsed radiolysis, sonolysis, two-ultraviolet-photon laser excitation of liquid water, or photodetachment of suitable electron donors. Here we report a method for the generation of hydrated electrons via single-visible-photon excitation of localized surface plasmon resonances (LSPRs) of supported sub-3 nm copper nanoparticles in contact with water. Only excitations at the LSPR maximum resulted in the formation of hydrated electrons, suggesting that plasmon excitation plays a crucial role in promoting electron transfer from the nanoparticle into the solution. The reactivity of the hydrated electrons was confirmed via proton reduction and concomitant H2 evolution in the presence of a Ru/TiO2 catalyst.

9.
Sci Rep ; 7(1): 8670, 2017 08 17.
Artigo em Inglês | MEDLINE | ID: mdl-28819324

RESUMO

The efficient conversion of light energy into chemical energy is key for sustainable human development. Several photocatalytic systems based on photovoltaic electrolysis have been used to produce hydrogen via water reduction. However, in such devices, light harvesting and proton reduction are carried separately, showing quantum efficiency of about 10-12%. Here, we report a nano-hybrid photocatalytic assembly that enables concomitant reductive hydrogen production and pollutant oxidation with solar-to-fuel efficiencies up to 20%. The modular architecture of this plasmonic material allows the fine-tuning of its photocatalytic properties by simple manipulation of a reduced number of basic components.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA