Three-Layer PdO/CuWO4/CuO System for Hydrogen Gas Sensing with Reduced Humidity Interference.

The growing hydrogen industry is stimulating an ongoing search for new materials not only for hydrogen production or storage but also for hydrogen sensing. These materials have to be sensitive to hydrogen, but additionally, their synthesis should be compatible with the microcircuit industry to enable seamless integration into various devices. In addition, the interference of air humidity remains an issue for hydrogen sensing materials. We approach these challenges using conventional reactive sputter deposition. Using three consequential processes, we synthesized multilayer structures. A basic two-layer system composed of a base layer of cupric oxide (CuO) overlayered with a nanostructured copper tungstate (CuWO4) exhibits higher sensitivity than individual materials. This is explained by the formation of microscopic heterojunctions. The addition of a third layer of palladium oxide (PdO) in forms of thin film and particles resulted in a reduction in humidity interference. As a result, a sensing three-layer system working at 150 °C with an equalized response in dry/humid air was developed.

Tuning Stoichiometry and Structure of Pd-WO3-x Thin Films for Hydrogen Gas Sensing by High-Power Impulse Magnetron Sputtering.

By tuning the deposition parameters of reactive high-power impulse magnetron sputtering, specifically the pulse length, we were able to prepare WO3-x films with various stoichiometry and structure. Subsequently, the films were annealed in air at moderate temperature (350 °C). We demonstrate that the stoichiometry of the as-deposited films influences considerably the type of crystalline phase formed in the annealed films. The appropriate sub-stoichiometry of the films (approx. WO2.76) enabled crystallization of the monoclinic phase during the annealing. This phase is favorable for hydrogen sensing applications. To characterize the sensory behavior of the films, the tungsten oxide films were decorated by Pd nanoparticles before annealing and were assembled as a conductometric gas sensor. The sensory response of the films that crystallized in the monoclinic structure was proven to be superior to that of the films containing other phases.

High-performance thermochromic VO2-based coatings with a low transition temperature deposited on glass by a scalable technique.

We report on high-performance thermochromic ZrO2/V0.982W0.018O2/ZrO2 coatings with a low transition temperature prepared on glass by a low-temperature scalable deposition technique. The V0.982W0.018O2 layers were deposited by a controlled high-power impulse magnetron sputtering of V target, combined with a simultaneous pulsed DC magnetron sputtering of W target to reduce the transition temperature to 20-21 °C, at a low substrate surface temperature of 330 °C in an argon-oxygen gas mixture. ZrO2 antireflection layers both below and above the thermochromic V0.982W0.018O2 layers were deposited at a low substrate temperature (< 100 °C). A coating design utilizing a second-order interference in the ZrO2 layers was applied to increase both the luminous transmittance (Tlum) and the modulation of the solar transmittance (ΔTsol). The ZrO2/V0.982W0.018O2/ZrO2 coatings exhibit Tlum up to 60% at ΔTsol close to 6% for a V0.982W0.018O2 thickness of 45 nm, and Tlum up to 50% at ΔTsol above 10% for a V0.982W0.018O2 thickness of 69 nm.

The use of porcine corrosion casts for teaching human anatomy.

In teaching and learning human anatomy, anatomical autopsy and prosected specimens have always been indispensable. However, alternative methods must often be used to demonstrate particularly delicate structures. Corrosion casting of porcine organs with Biodur E20® Plus is valuable for teaching and learning both gross anatomy and, uniquely, the micromorphology of cardiovascular, respiratory, digestive, and urogenital systems. Assessments of casts with a stereomicroscope and/or scanning electron microscope as well as highlighting cast structures using color coding help students to better understand how the structures that they have observed as two-dimensional images actually exist in three dimensions, and students found using the casts to be highly effective in their learning. Reconstructions of cast hollow structures from (micro-)computed tomography scans and videos facilitate detailed analyses of branching patterns and spatial arrangements in cast structures, aid in the understanding of clinically relevant structures and provide innovative visual aids. The casting protocol and teaching manual we offer can be adjusted to different technical capabilities and might also be found useful for veterinary or other biological science classes.

Preparation of magnetron sputtered thin cerium oxide films with a large surface on silicon substrates using carbonaceous interlayers.

The study focuses on preparation of thin cerium oxide films with a porous structure prepared by rf magnetron sputtering on a silicon wafer substrate using amorphous carbon (a-C) and nitrogenated amorphous carbon films (CNx) as an interlayer. We show that the structure and morphology of the deposited layers depend on the oxygen concentration in working gas used for cerium oxide deposition. Considerable erosion of the carbonaceous interlayer accompanied by the formation of highly porous carbon/cerium oxide bilayer systems is reported. Etching of the carbon interlayer with oxygen species occurring simultaneously with cerium oxide film growth is considered to be the driving force for this effect resulting in the formation of nanostructured cerium oxide films with large surface. In this regard, results of oxygen plasma treatment of a-C and CNx films are presented. Gradual material erosion with increasing duration of plasma impact accompanied by modification of the surface roughness is reported for both types of films. The CNx films were found to be much less resistant to oxygen etching than the a-C film.

Modeling growth of one-dimensional islands: influence of reactive defects.

Influence of reactive defects on size distribution of one-dimensional islands is studied by means of kinetic Monte Carlo simulations in combination with an analytical approach. Two different models are examined: a model with anisotropically diffusing atoms irreversibly aggregating to islands, and a reversible model close to thermal equilibrium which allows atom detachment from islands during the growth. The models can be used to simulate island growth of group III metals deposited on the Si(100)2 x 1 surface at room temperature: Al, Ga (irreversible model), and In (equilibrium model). We demonstrate that concentration of the reactive defects 0.0025 per site may change the island size distribution from monomodal to monotonically decreasing in the case of the irreversible model. At concentration >or=0.005 defects per site, a difference between results of the studied models is suppressed by the influence of the defects and similar island size distributions are obtained.