Influences of shape, size, and gloss on the perceived color difference of 3D printed objects.

In order to study the influence and mechanisms of color differences using 3D-shaped objects, 440 pairs of 3D samples surrounding five CIE color centers (gray, red, yellow, green, and blue) with the variations of gloss, size, and shape were prepared by a Sailner 3D color printer, and their color differences were assessed by 26∼45 observers using the gray-scale method. The new color difference data were used to investigate the parametric effects (gloss, 3D shape, and size) on the perceived color difference. Results indicate that, for 3D objects, high gloss and small size objects (2 cm) raise smaller visual color differences than matte and large size objects (4 cm), and the visual color difference of spheres is larger than that of the cone and cylinder sample pairs. The chromaticity ellipses indicated that the glossy samples with different shapes will arouse fairly different visual perceptions, especially for sphere and cylinder samples.

Optimizing Color-Difference Formulas for 3D-Printed Objects.

Based on previous visual assessments of 440 color pairs of 3D-printed samples, we tested the performance of eight color-difference formulas (CIELAB, CIEDE2000, CAM02-LCD, CAM02-SCD, CAM02-UCS, CAM16-LCD, CAM16-SCD, and CAM16-UCS) using the standardized residual sum of squares (STRESS) index. For the whole set of 440 color pairs, the introduction of kL (lightness parametric factor), b (exponent in total color difference), and kL + b produced an average STRESS decrease of 2.6%, 26.9%, and 29.6%, respectively. In most cases, the CIELAB formula was significantly worse statistically than the remaining seven formulas, for which no statistically significant differences were found. Therefore, based on visual results using 3D-object colors with the specific shape, size, gloss, and magnitude of color differences considered here, we concluded that the CIEDE2000, CAM02-, and CAM16-based formulas were equivalent and thus cannot recommend only one of them. Disregarding CIELAB, the average STRESS decreases in the kL + b-optimized formulas from changes in each one of the four analyzed parametric factors were not statistically significant and had the following values: 6.2 units changing from color pairs with less to more than 5.0 CIELAB units; 2.9 units changing the shape of the samples (lowest STRESS values for cylinders); 0.7 units changing from nearly-matte to high-gloss samples; and 0.5 units changing from 4 cm to 2 cm samples.

The effect of colour environments on visual tracking and visual strain during short-term simulation of three gravity states.

This study investigated the effects of nine colour environments on visual tracking accuracy and visual strain during normal sitting (SP), -12° head-down bed (HD) and 9.6° head-up tilt bed (HU). In a standard posture change laboratory study, fifty-four participants performed visual tracking tasks in nine colour environments while in the three postures. Visual strain was measured by means of a questionnaire. The results showed that in all colour environments, the -12° head-down bed rest posture significantly affected visual tracking accuracy and visual strain. During the three postures, the participants' visual tracking accuracy in the cyan environment was significantly higher than that in other colour environments, and their visual strain was the lowest. Overall, the study adds to our understanding of how environmental and postural factors impact on visual tracking and visual strain.

The Effect of Correlated Colour Temperature on Physiological, Emotional and Subjective Satisfaction in the Hygiene Area of a Space Station.

The hygiene area is one of the most important facilities in a space station. If its environmental lighting is appropriately designed, it can significantly reduce the psychological pressure on astronauts. This study investigates the effect of correlated colour temperature (CCT) on heart rate, galvanic skin response, emotion and satisfaction in the hygiene area of a space station. Forty subjects participated in experiments in a hygiene area simulator with a controlled lighting environment. The lighting conditions included 2700 K, 3300 K, 3600 K, 5000 K and 6300 K; physiological responses (heart rate, galvanic skin response), as well as emotion and satisfaction, were recorded. The results showed that CCT significantly influenced the participants' physiological and subjective responses in the space station hygiene area. 6300 K led to the best emotion and satisfaction levels, the highest galvanic skin response and the lowest heart rate. The opposite was true for 2700 K.