Effects of Chemicals in Reporter Gene Bioassays with Different Metabolic Activities Compared to Baseline Toxicity.

High-throughput cell-based bioassays are used for chemical screening and risk assessment. Chemical transformation processes caused by abiotic degradation or metabolization can reduce the chemical concentration or, in some cases, lead to the formation of more toxic transformation products. Unaccounted loss processes may falsify the bioassay results. Capturing the formation and effects of transformation products is important for relating the in vitro effects to in vivo. Reporter gene cell lines are believed to have low metabolic activity, but inducibility of cytochrome P450 (CYP) enzymes has been reported. Baseline toxicity is the minimal toxicity a chemical can have and is caused by the incorporation of the chemical into cell membranes. In the present study, we improved an existing baseline toxicity model based on a newly defined critical membrane burden derived from freely dissolved effect concentrations, which are directly related to the membrane concentration. Experimental effect concentrations of 94 chemicals in three bioassays (AREc32, ARE-bla and GR-bla) were compared with baseline toxicity by calculating the toxic ratio (TR). CYP activities of all cell lines were determined by using fluorescence-based assays. Only ARE-bla showed a low basal CYP activity and inducibility and AREc32 showed a low inducibility. Overall cytotoxicity was similar in all three assays despite the different metabolic activities indicating that chemical metabolism is not relevant for the cytotoxicity of the tested chemicals in these assays. Up to 28 chemicals showed specific cytotoxicity with TR > 10 in the bioassays, but baseline toxicity could explain the effects of the majority of the remaining chemicals. Seven chemicals showed TR < 0.1 indicating inaccurate physicochemical properties or experimental artifacts like chemical precipitation, volatilization, degradation, or other loss processes during the in vitro bioassay. The new baseline model can be used not only to identify specific cytotoxicity mechanisms but also to identify potential problems in the experimental performance or evaluation of the bioassay and thus improve the quality of the bioassay data.

In Vitro Metabolism and p53 Activation of Genotoxic Chemicals: Abiotic CYP Enzyme vs Liver Microsomes.

Chemicals often require metabolic activation to become genotoxic. Established test guidelines recommend the use of the rat liver S9 fraction or microsomes to introduce metabolic competence to in vitro cell-based bioassays, but the use of animal-derived components in cell culture raises ethical concerns and may lead to quality issues and reproducibility problems. The aim of the present study was to compare the metabolic activation of cyclophosphamide (CPA) and benzo[a]pyrene (BaP) by induced rat liver microsomes and an abiotic cytochrome P450 (CYP) enzyme based on a biomimetic porphyrine catalyst. For the detection of genotoxic effects, the chemicals were tested in a reporter gene assay targeting the activation of the cellular tumor protein p53. Both chemicals were metabolized by the abiotic CYP enzyme and the microsomes. CPA showed no activation of p53 and low cytotoxicity without metabolic activation, but strong activation of p53 and increased cytotoxicity upon incubation with liver microsomes or abiotic CYP enzyme. The effect concentration causing a 1.5-fold induction of p53 activation was very similar with both metabolization systems (within a factor of 1.5), indicating that genotoxic metabolites were formed at comparable concentrations. BaP also showed low cytotoxicity and no p53 activation without metabolic activation. The activation of p53 was detected for BaP upon incubation with active and inactive microsomes at similar concentrations, indicating experimental artifacts caused by the microsomes or NADPH. The activation of BaP with the abiotic CYP enzyme increased the cytotoxicity of BaP by a factor of 8, but no activation of p53 was detected. The results indicate that abiotic CYP enzymes may present an alternative to rat liver S9 fraction or microsomes for the metabolic activation of test chemicals, which are completely free of animal-derived components. However, an amendment of existing test guidelines would require testing of more chemicals and genotoxicity end points.

Baseline Toxicity Model to Identify the Specific and Nonspecific Effects of Per- and Polyfluoroalkyl Substances in Cell-Based Bioassays.

High-throughput screening is a strategy to identify potential adverse outcome pathways (AOP) for thousands of per- and polyfluoroalkyl substances (PFAS) if the specific effects can be distinguished from nonspecific effects. We hypothesize that baseline toxicity may serve as a reference to determine the specificity of the cell responses. Baseline toxicity is the minimum (cyto)toxicity caused by the accumulation of chemicals in cell membranes, which disturbs their structure and function. A mass balance model linking the critical membrane concentration for baseline toxicity to nominal (i.e., dosed) concentrations of PFAS in cell-based bioassays yielded separate baseline toxicity prediction models for anionic and neutral PFAS, which were based on liposome-water distribution ratios as the sole model descriptors. The specificity of cell responses to 30 PFAS on six target effects (activation of peroxisome proliferator-activated receptor (PPAR) gamma, aryl hydrocarbon receptor, oxidative stress response, and neurotoxicity in own experiments, and literature data for activation of several PPARs and the estrogen receptor) were assessed by comparing effective concentrations to predicted baseline toxic concentrations. HFPO-DA, HFPO-DA-AS, and PFMOAA showed high specificity on PPARs, which provides information on key events in AOPs relevant to PFAS. However, PFAS were of low specificity in the other experimentally evaluated assays and others from the literature. Even if PFAS are not highly specific for certain defined targets but disturb many toxicity pathways with low potency, such effects are toxicologically relevant, especially for hydrophobic PFAS and because PFAS are highly persistent and cause chronic effects. This implicates a heightened need for the risk assessment of PFAS mixtures because nonspecific effects behave concentration-additive in mixtures.

Species Difference? Bovine, Trout, and Human Plasma Protein Binding of Per- and Polyfluoroalkyl Substances.

Per- and polyfluoroalkyl substances (PFAS) strongly bind to proteins and lipids in blood, which govern their accumulation and distribution in organisms. Understanding the plasma binding mechanism and species differences will facilitate the quantitative in vitro-to-in vivo extrapolation and improve risk assessment of PFAS. We studied the binding mechanism of 16 PFAS to bovine serum albumin (BSA), trout, and human plasma using solid-phase microextraction. Binding of anionic PFAS to BSA and human plasma was found to be highly concentration-dependent, while trout plasma binding was linear for the majority of the tested PFAS. At a molar ratio of PFAS to protein ν < 0.1 molPFAS/molprotein, the specific protein binding of anionic PFAS dominated their human plasma binding. This would be the scenario for physiological conditions (ν < 0.01), whereas in in vitro assays, PFAS are often dosed in excess (ν > 1) and nonspecific binding becomes dominant. BSA was shown to serve as a good surrogate for human plasma. As trout plasma contains more lipids, the nonspecific binding to lipids affected the affinities of PFAS for trout plasma. Mass balance models that are parameterized with the protein-water and lipid-water partitioning constants (chemical characteristics), as well as the protein and lipid contents of the plasma (species characteristics), were successfully used to predict the binding to human and trout plasma.

Reactivity of Acrylamides Causes Cytotoxicity and Activates Oxidative Stress Response.

Acrylamides are widely used industrial chemicals that cause adverse effects in humans or animals, such as carcinogenicity or neurotoxicity. The excess toxicity of these reactive electrophilic chemicals is especially interesting, as it is mostly triggered by covalent reactions with biological nucleophiles, such as DNA bases, proteins, or peptides. The cytotoxicity and activation of oxidative stress response of 10 (meth)acrylamides measured in three reporter gene cell lines occurred at similar concentrations. Most acrylamides exhibited high excess toxicity, while methacrylamides acted as baseline toxicants. The (meth)acrylamides showed no reactivity toward the hard biological nucleophile 2-deoxyguanosine (2DG) within 24 h, and only acrylamides reacted with the soft nucleophile glutathione (GSH). Second-order degradation rate constants (kGSH) were measured for all acrylamides with N,N'-methylenebis(acrylamide) (NMBA) showing the highest kGSH (134.800 M-1 h-1) and N,N-diethylacrylamide (NDA) the lowest kGSH (2.574 M-1 h-1). Liquid chromatography coupled to high-resolution mass spectrometry was used to confirm the GSH conjugates of the acrylamides with a double conjugate formed for NMBA. The differences in reactivity between acrylamides and methacrylamides could be explained by the charge density of the carbon atoms because the electron-donating inductive effect of the methyl group of the methacrylamides lowered their electrophilicity and thus their reactivity. The differences in reactivity within the group of acrylamides could be explained by the energy of the lowest unoccupied molecular orbital and steric hindrance. Cytotoxicity and activation of oxidative stress response were linearly correlated with the second-order reaction rate constants of the acrylamides with GSH. The reaction of the acrylamides with GSH is hence not only a detoxification mechanism but also leads to disturbances of the redox balance, making the cells more vulnerable to reactive oxygen species. The reactivity of acrylamides explained the oxidative stress response and cytotoxicity in the cells, and the lack of reactivity of the methacrylamides led to baseline toxicity.

High-Throughput Assessment of the Abiotic Stability of Test Chemicals in In Vitro Bioassays.

Abiotic stability of chemicals is not routinely tested prior to performing in vitro bioassays, although abiotic degradation can reduce the concentration of test chemicals leading to the formation of active or inactive transformation products, which may lead to misinterpretation of bioassay results. A high-throughput workflow was developed to measure the abiotic stability of 22 test chemicals in protein-rich aqueous media under typical bioassay conditions at 37 °C for 48 h. These test chemicals were degradable in the environment according to a literature review. The chemicals were extracted from the exposure media at different time points using a novel 96-pin solid-phase microextraction. The conditions were varied to differentiate between various reaction mechanisms. For most hydrolyzable chemicals, pH-dependent degradation in phosphate-buffered saline indicated that acid-catalyzed hydrolysis was less important than reactions with hydroxide ions. Reactions with proteins were mainly responsible for the depletion of the test chemicals in the media, which was simulated by bovine serum albumin (BSA) and glutathione (GSH). 1,2-Benzisothiazol-3(2H)-one, 2-methyl-4-isothiazolinone, and l-sulforaphane reacted almost instantaneously with GSH but not with BSA, indicating that GSH is a good proxy for reactivity with electrophilic amino acids but may overestimate the actual reaction with three-dimensional proteins. Chemicals such as hydroquinones or polyunsaturated chemicals are prone to autoxidation, but this reaction is difficult to differentiate from hydrolysis and could not be simulated by the oxidant N-bromosuccinimide. Photodegradation played a minor role because cells are exposed in incubators in the dark and simulations with high light intensities did not yield realistic degradation. Stability predictions from various in silico prediction models for environmental conditions can give initial indications of the stability but were not always consistent with the experimental stability in bioassays. As the presented workflow can be performed in high throughput under realistic bioassay conditions, it can be used to provide an experimental database for developing bioassay-specific stability prediction models.

Quantitative In Vitro-to-In Vivo Extrapolation: Nominal versus Freely Dissolved Concentration.

Discussions are ongoing on which dose metric should be used for quantitative in vitro-to-in vivo extrapolation (QIVIVE) of in vitro bioassay data. The nominal concentration of the test chemicals is most commonly used and easily accessible, while the concentration freely dissolved in the assay medium is considered to better reflect the bioavailable concentration but is tedious to measure. The aim of this study was to elucidate how much QIVIVE results will differ when using either nominal or freely dissolved concentrations. QIVIVEnom and QIVIVEfree ratios, that is, the ratios of plasma concentrations divided by in vitro effect concentrations, were calculated for 10 pharmaceuticals using previously published nominal and freely dissolved effect concentrations for the activation of the peroxisome proliferator-activated receptor gamma (PPARγ) and the activation of oxidative stress response. The QIVIVEnom ratios were higher than QIVIVEfree ratios by up to a factor of 60. The risk of in vivo effects was classified as being high or low for four chemicals using the QIVIVEnom and for three chemicals using QIVIVEfree ratios. Unambiguous classification was possible for nine chemicals by combining the QIVIVEnom or QIVIVEfree ratios with the respective specificity ratios (SRnom or SRfree) of the in vitro effect data, which helps to identify whether the specific effect was influenced by cytotoxicity. QIVIVEfree models should be preferred as they account for differences in bioavailability between in vitro and in vivo, but QIVIVEnom may still be useful for screening the effects of large numbers of chemicals because it is generally more conservative. The use of SR of the in vitro effect data as a second classification factor is recommended for QIVIVEnom and QIVIVEfree models because a clearer picture can be obtained with respect to the likelihood that a biological effect will occur and that it is not caused by nonspecific cytotoxicity.

Critical Membrane Concentration and Mass-Balance Model to Identify Baseline Cytotoxicity of Hydrophobic and Ionizable Organic Chemicals in Mammalian Cell Lines.

All chemicals can interfere with cellular membranes and this leads to baseline toxicity, which is the minimal toxicity any chemical elicits. The critical membrane burden is constant for all chemicals; that is, the dosing concentrations to trigger baseline toxicity decrease with increasing hydrophobicity of the chemicals. Quantitative structure-activity relationships, based on hydrophobicity of chemicals, have been established to predict nominal concentrations causing baseline toxicity in human and mammalian cell lines. However, their applicability is limited to hydrophilic neutral compounds. To develop a prediction model that includes more hydrophobic and charged organic chemicals, a mass balance model was applied for mammalian cells (AREc32, AhR-CALUX, PPARγ-BLA, and SH-SY5Y) considering different bioassay conditions. The critical membrane burden for baseline toxicity was converted into nominal concentration causing 10% cytotoxicity by baseline toxicity (IC10,baseline) using a mass balance model whose main chemical input parameter was the liposome-water partition constants (Klip/w) for neutral chemicals or the speciation-corrected Dlip/w(pH 7.4) for ionizable chemicals plus the bioassay-specific protein, lipid, and water contents of cells and media. In these bioassay-specific models, log(1/IC10,baseline) increased with increasing hydrophobicity, and the relationship started to level off at log Dlip/w around 2. The bioassay-specific models were applied to 392 chemicals covering a broad range of hydrophobicity and speciation. Comparing the predicted IC10,baseline and experimental cytotoxicity IC10, known baseline toxicants and many additional chemicals were identified as baseline toxicants, while the others were classified based on specificity of their modes of action in the four cell lines, confirming excess toxicity of some fungicides, antibiotics, and uncouplers. Given the similarity of the bioassay-specific models, we propose a generalized baseline-model for adherent human cell lines: log[1/IC10,baseline (M)] = 1.23 + 4.97 × (1 - e-0.236 log Dlip/w). The derived models for baseline toxicity may serve for specificity analysis in reporter gene and neurotoxicity assays as well as for planning the dosing for cell-based assays.

Suspended Particulate Matter-A Source or Sink for Chemical Mixtures of Organic Micropollutants in a Small River under Baseflow Conditions?

Suspended particulate matter (SPM) plays an important role in the fate of organic micropollutants in rivers during rain events, when sediments are remobilized and turbid runoff components enter the rivers. Under baseflow conditions, the SPM concentration is low and the contribution of SPM-bound contaminants to the overall risk of organic contaminants in rivers is assumed to be negligible. To challenge this assumption, we explored if SPM may act as a source or sink for all or specific groups of organic chemicals in a small river. The concentrations of over 600 contaminants and the mixture effects stemming from all chemicals in in vitro bioassays were measured for river water, SPM, and the surface sediment after solid-phase extraction or exhaustive solvent extraction. The bioavailable fractions of chemicals and mixture effects were estimated after passive equilibrium sampling of enriched SPM slurries and sediments in the lab. Dissolved compounds dominated the total chemical burden in the water column (water plus SPM) of the river, whereas SPM-bound chemicals contributed up to 46% of the effect burden even if the SPM concentration in rivers was merely 1 mg/L. The equilibrium between water and SPM was still not reached under low-flow conditions with SPM as a source of water contamination. The ratios of SPM-associated to sediment-associated neutral and hydrophobic chemicals as well as the ratios of the mixture effects expressed as bioanalytical equivalent concentrations were close to 1, suggesting that the surface sediment can be used as a proxy for SPM under baseflow conditions when the sampling of a large amount of water to obtain sufficient SPM cannot be realized.

Environmental Sorption Behavior of Ionic and Ionizable Organic Chemicals.

Traditionally our tools for environmental risk assessment of organic chemicals have been developed for neutral chemicals. However, many commercial chemicals are ionic or ionizable and require different tools and approaches for their assessment. In recent years this task starts to obtain increasing attention but our understanding for their environmental fate is still far behind that for neutral chemicals. This review first gives an overview on the principles that govern ionic partitioning in environmental systems which are more complex than the simple partition processes of neutral chemicals. Second, a summary of our current knowledge on various topics such as bioaccumulation, sorption in soils, and nonspecific-toxicity reveals that ionic species can actually be quite hydrophobic contrary to commonly held beliefs. Eventually, we discuss existing models for the quantitative prediction of organic ions' sorption in soils and biota. We have to assert that the available model tools are quite restricted in their application range compared to neutral chemicals which is due to the higher complexity of the various ionic sorption processes. In order to further advance our understanding more high-quality sorption data are needed with a focus on multivalent and zwitterionic ions in all partition systems as well as cations in biological matrices.

Experimental Exposure Assessment of Ionizable Organic Chemicals in In Vitro Cell-Based Bioassays.

Exposure assessment in in vitro cell-based bioassays is challenging for ionizable organic chemicals (IOCs), because they are present as more than one chemical species in the bioassay medium. Furthermore, compared to neutral organic chemicals, their binding to medium proteins and lipids is driven by more complex molecular interactions. Total medium concentrations (Ctotal,medium) and/or freely dissolved medium concentrations (Cfree,medium) were determined for one neutral chemical and 14 IOCs (acids, bases, multifunctional) at concentrations relevant for determination of cytotoxicity and effect. Cfree,medium was measured in two in vitro bioassays at the time of dosing and after 24 h of incubation using solid-phase microextraction. Cfree,medium was maximally 1.7 times lower than the nominal concentrations (Cnom) for the hydrophilic chemicals (caffeine and lamotrigine). For the organic acids (naproxen, ibuprofen, warfarin, and diclofenac), Cfree,medium was by a factor of 4 lower than Cnom at high concentrations, but the ratio was much higher at low concentrations, indicating a nonlinear binding behavior. The experimental Cfree,medium was also compared with Cfree,medium predicted with a mass balance model accounting for binding to medium proteins and lipids. The mass balance model performed well for five of the test chemicals (within a factor of 10), but it underestimated Cfree,medium by up to a factor of 1200 for chemicals that showed nonlinear binding to medium components. These findings emphasize that experimental exposure assessment is required for improved understanding of in vitro toxicity data.

Cellular Metabolism in High-Throughput In Vitro Reporter Gene Assays and Implications for the Quantitative In Vitro-In Vivo Extrapolation.

High-throughput in vitro reporter gene assays are increasingly applied to assess the potency of chemicals to alter specific cellular signaling pathways. Genetically modified reporter gene cell lines provide stable readouts of the activation of cellular receptors or transcription factors of interest, but such reporter gene assays have been criticized for not capturing cellular metabolism. We characterized the metabolic activity of the widely applied AREc32 (human breast cancer MCF-7), ARE-bla (human liver cancer HepG2), and GR-bla (human embryonic kidney HEK293) reporter gene cells in the absence and in the presence of benzo[a]pyrene (BaP), an AhR ligand known to upregulate cytochrome P450 in vitro and in vivo. We combined fluorescence microscopy with chemical analysis, real-time PCR, and ethoxyresorufin-O-deethylase activity measurements to track temporal changes in BaP and its metabolites in the cells and surrounding medium over time in relation to the expression and activity of metabolic enzymes. Decreasing BaP concentrations and formation of metabolites agreed with the high basal CYP1 activity of ARE-bla and the strong CYP1A1 mRNA induction in AREc32, whereas BaP concentrations were constant in GR-bla, in which neither metabolites nor CYP1 induction was detected. The study emphasizes that differences in sensitivity between reporter gene assays may be caused not only by different reporter constructs but also by a varying biotransformation rate of the evaluated parent chemical. The basal metabolic capacity of reporter gene cells in the absence of chemicals is not a clear indication because we demonstrated that the metabolic activity can be upregulated by AhR ligands during the assay. The combination of methods presented here is suitable to characterize the metabolic activity of cells in vitro and can improve the interpretation of in vitro reporter gene effect data and extrapolation to in vivo human exposure.

Experimental Validation of Mass Balance Models for in Vitro Cell-Based Bioassays.

The freely dissolved concentration in the assay medium (Cfree) and the total cellular concentration (Ccell) are essential input parameters for quantitative in vitro-to-in vivo extrapolations (QIVIVE), but available prediction tools for Cfree and Ccell have not been sufficiently validated with experimental data. In this study, medium-water distribution ratios (DFBS/w) and cell-water distribution ratios (Dcell/w) for four different cells lines were determined experimentally for 12 neutral and five ionizable chemicals. Literature data for seven organic acids were added to the dataset, leading to 24 chemicals in total. A mass balance model based on bovine serum albumin-water (DBSA/w) and liposome-water distribution ratios (Dlip/w) of the chemicals was used to calculate DFBS/w and Dcell/w. For all neutral and basic test chemicals, the mass balance model predicted DFBS/w and Dcell/w within a factor of 3 and 3.4, respectively, indicating that existing models can reliably predict Cfree and Ccell for these chemicals. For organic acids, a further refinement of the model will be required as large deviations between modeled and measured binding to assay medium and cells of up to a factor of 370 were found. Furthermore, saturation of medium proteins should be further explored for organic acids and neutral chemicals with moderate hydrophobicity.

How To Improve the Dosing of Chemicals in High-Throughput in Vitro Mammalian Cell Assays.

Controlling the exposure of chemicals in in vitro mammalian cell assays is an important prerequisite for the application of in vitro methods in risk and hazard assessment of chemicals. Existing models require numerous physicochemical and system parameters to quantify the effective concentration in the assay. Synthesizing these studies, this article briefly communicates how the protein-rich supplement in the medium can be utilized to adjust constant and quantifiable exposure concentrations without the need for measurements and complex modeling. We present a simplified mass balance equation based on chemical properties and system parameters from openly accessible databases, which can be used to adjust the dose of chemicals in the exposure medium, leading to defined and stable freely dissolved concentrations (Cfree). The proposed framework prevents experimental artifacts associated with the use of cosolvents and medium oversaturation and enables the conversion of in vitro effect data to freely dissolved effect concentrations (ECfree), which can directly be applied in quantitative in vitro to in vivo extrapolation models and compared to other exposure scenarios.

C18-Coated Solid-Phase Microextraction Fibers for the Quantification of Partitioning of Organic Acids to Proteins, Lipids, and Cells.

The effects measured with in vitro cell-based bioassays are typically reported as nominal effect concentrations ( Cnom), but the freely dissolved concentration in the exposure medium ( Cw) and the total cellular concentration ( Ccell) are considered more quantitative dose metrics that allow extrapolation to the whole-organism level. To predict Cw and Ccell, the partitioning of the test chemicals to medium proteins and lipids and cells has to be known. In this study, we developed a solid-phase microextraction (SPME) method based on C18-coated fibers to quantify the partitioning of diclofenac, 2,4-dichlorophenoxyacetic acid (2,4-D), ibuprofen, naproxen, torasemide, warfarin, and genistein to bovine serum albumin (BSA), phospholipid liposomes, fetal bovine serum (FBS), and cells. For ibuprofen, 2,4-D, naproxen, and warfarin, the partitioning to the SPME fibers was found to be concentration dependent, which had to be considered for the calculation of distribution ratios to biological materials. The sorption isotherms to FBS were nonlinear for diclofenac, 2,4-D, ibuprofen, naproxen, and warfarin. The FBS isotherms could be described by assuming that the total amount of chemical bound to FBS is the sum of the amount specifically bound to the binding sites of albumin and nonspecifically bound to all medium proteins and lipids. The determined cell-water distribution ratios ( Dcell/w) differed considerably between four different cell lines (up to 1.83 log-units) and also between different batches of the same cell line (up to 0.48 log-units). The relative importance of protein and lipid content for Dcell/w was evaluated with a mass balance model and different types of cellular proteins and lipids as input parameters. Existing in vitro mass balance models may underestimate Cw because they do not account for saturable protein binding and overestimate Ccell for organic acids, if BSA is used as surrogate for cellular proteins.

Combined Ion-Trapping and Mass Balance Models To Describe the pH-Dependent Uptake and Toxicity of Acidic and Basic Pharmaceuticals in Zebrafish Embryos ( Danio rerio).

The aim of the current study was to understand and develop models to predict the pH-dependent toxicity of ionizable pharmaceuticals in embryos of the zebrafish Danio rerio. We found a higher uptake and toxicity with increasing neutral fraction of acids (diclofenac, genistein, naproxen, torasemide, and warfarin) and bases (metoprolol and propranolol). Simple mass balance models accounting for the partitioning to lipids and proteins in the zebrafish embryo were found to be suitable to predict the bioconcentration after 96 h of exposure if pH values did not differ much from the internal pH of 7.55. For other pH values, a kinetic ion-trap model for the zebrafish embryo explained the pH dependence of biouptake and toxicity. The total internal lethal concentrations killing 50% of the zebrafish embryos (ILC50) were calculated from the measured BCF and LC50. The resulting ILC50 were independent of external pH. Critical membrane concentrations were deduced by an internal mass balance model, and apart from diclofenac, whose specific toxicity in fish had already been established, all pharmaceuticals were confirmed to act as baseline toxicants in zebrafish.

Quantification of freely dissolved effect concentrations in in vitro cell-based bioassays.

Improved understanding of chemical exposure in in vitro bioassays is required for quantitative in vitro-in vivo extrapolation (QIVIVE). In this study, we quantified freely dissolved concentrations in medium sampled from in vitro cell-based bioassays (Cfree,medium) for nine chemicals with different hydrophobicity and speciation at the time point of dosing and after an incubation period of 24 h using solid-phase microextraction. The chemicals were tested in two reporter gene assays, the AREc32 assay indicative of the oxidative stress response and the PPARγ-GeneBLAzer assay that responds to chemicals which bind to the peroxisome proliferator-activated receptor gamma. For seven of the nine chemicals, Cfree,medium did not change significantly over time in both assays and the experimentally determined Cfree,medium generally agreed well with predictions of a mass balance model that describes the partitioning between proteinaceous and lipidous medium constituents, cells and the aqueous phase. Two chemicals showed a decrease of Cfree,medium in the AREc32 assay over time that was probably caused by cellular metabolism. Furthermore, Cfree,medium of the acidic chemical diclofenac deviated from the model predictions by more than a factor of 10 at higher concentrations, which indicates nonlinear binding and saturation of the medium proteins. Bioassay results are typically reported as nominal effect concentrations (ECnom), although it is established that freely dissolved effect concentrations (ECfree) are a better measure for the bioavailable dose and the method developed here provides a simple experimental approach to measure and model ECfree in in vitro bioassay for improved QIVIVE models.

Cellular Uptake Kinetics of Neutral and Charged Chemicals in in Vitro Assays Measured by Fluorescence Microscopy.

Cellular uptake kinetics are key for understanding time-dependent chemical exposure in in vitro cell assays. Slow cellular uptake kinetics in relation to the total exposure time can considerably reduce the biologically effective dose. In this study, fluorescence microscopy combined with automated image analysis was applied for time-resolved quantification of cellular uptake of 10 neutral, anionic, cationic, and zwitterionic fluorophores in two reporter gene assays. The chemical fluorescence in the medium remained relatively constant during the 24-h assay duration, emphasizing that the proteins and lipids in the fetal bovine serum (FBS) supplemented to the assay medium represent a large reservoir of reversibly bound chemicals with the potential to compensate for chemical depletion by cell uptake, growth, and sorption to well materials. Hence FBS plays a role in stabilizing the cellular dose in a similar way as polymer-based passive dosing, here we term this process as serum-mediated passive dosing (SMPD). Neutral chemicals accumulated in the cells up to 12 times faster than charged chemicals. Increasing medium FBS concentrations accelerated uptake due to FBS-facilitated transport but led to lower cellular concentrations as a result of increased sorption to medium proteins and lipids. In vitro cell exposure results from the interaction of several extra- and intracellular processes, leading to variable and time-dependent exposure between different chemicals and assay setups. The medium FBS plays a crucial role for the thermodynamic equilibria as well as for the cellular uptake kinetics, hence influencing exposure. However, quantification of cellular exposure by an area under the curve (AUC) analysis illustrated that, for the evaluated bioassay setup, current in vitro exposure models that assume instantaneous equilibrium between medium and cells still reflect a realistic exposure because the AUC was typically reduced less than 20% compared to the cellular dose that would result from instantaneous equilibrium.

Application of Experimental Polystyrene Partition Constants and Diffusion Coefficients to Predict the Sorption of Neutral Organic Chemicals to Multiwell Plates in in Vivo and in Vitro Bioassays.

Sorption to the polystyrene (PS) of multiwell plates can affect the exposure to organic chemicals over time in in vitro and in vivo bioassays. Experimentally determined diffusion coefficients in PS ( DPS) were in a narrow range of 1.25 to 8.0 · 10-16 m2 s-1 and PS-water partition constants ( KPS/w) ranged from 0.04 to 5.10 log-units for 22 neutral organic chemicals. A kinetic model, which explicitly accounts for diffusion in the plastic, was applied to predict the depletion of neutral organic chemicals from different bioassay media by sorption to various multiwell plate formats. For chemicals with log Kow > 3, the medium concentrations decreased rapidly and considerably in the fish embryo toxicity assay but medium concentrations remained relatively constant in the cell-based bioassays with medium containing 10% fetal bovine serum (FBS), emphasizing the ability of the protein- and lipid-rich medium to compensate for losses by multiwell plate sorption. The PS sorption data may serve not only for exposure assessment in bioassays but also to model the contaminant uptake by and release from plastic packaging material and the chemical transport by PS particles in the environment.

Modeling Exposure in the Tox21 in Vitro Bioassays.

High-throughput in vitro bioassays are becoming increasingly important in the risk characterization of anthropogenic chemicals. Large databases gather nominal effect concentrations (Cnom) for diverse modes of action. However, the biologically effective concentration can substantially deviate due to differences in chemical partitioning. In this study, we modeled freely dissolved (Cfree), cellular (Ccell), and membrane concentrations (Cmem) in the Tox21 GeneBLAzer bioassays for a set of neutral and ionogenic organic chemicals covering a large physicochemical space. Cells and medium constituents were experimentally characterized for their lipid and protein content, and partition constants were either collected from the literature or predicted by mechanistic models. The chemicals exhibited multifaceted partitioning to proteins and lipids with distribution ratios spanning over 8 orders of magnitude. Modeled Cfree deviated over 5 orders of magnitude from Cnom and can be compared to in vivo effect data, environmental concentrations, and the unbound fraction in plasma, which is needed for the in vitro to in vivo extrapolation. Ccell was relatively constant for chemicals with membrane lipid-water distribution ratios of 1000 or higher and proportional to Cnom. Representing a sum parameter for exposure that integrates the entire dose from intracellular partitioning, Ccell is particularly suitable for the effect characterization of chemicals with multiple target sites and the calculation of their relative effect potencies. Effective membrane concentrations indicated that the specific effects of very hydrophobic chemicals in multiple bioassays are occurring at concentrations close to baseline toxicity. The equilibrium partitioning model including all relevant system parameters and a generic bioassay setup is attached as an excel workbook to this paper and can readily be applied to diverse in vitro bioassays.