Enhancing the Thermal Mineralization of Perfluorooctanesulfonate on Granular Activated Carbon Using Alkali and Alkaline-Earth Metal Additives.

Thermal treatment has emerged as a promising approach for either the end-of-life treatment or regeneration of granular activated carbon (GAC) contaminated with per- and polyfluoroalkyl substances (PFAS). However, its effectiveness has been limited by the requirement for high temperatures, the generation of products of incomplete destruction, and the necessity to scrub HF in the flue gas. This study investigates the use of common alkali and alkaline-earth metal additives to enhance the mineralization of perfluorooctanesulfonate (PFOS) adsorbed onto GAC. When treated at 800 °C without an additive, only 49% of PFOS was mineralized to HF. All additives tested demonstrated improved mineralization, and Ca(OH)2 had the best performance, achieving a mineralization efficiency of 98% in air or N2. Its ability to increase the reaction rate and shift the byproduct selectivity suggests that its role may be catalytic. Moreover, additives reduced HF in the flue gas by instead reacting with the additive to form inorganic fluorine (e.g., CaF2) in the starting waste material. A hypothesized reaction mechanism is proposed that involves the electron transfer from O2- defect sites of CaO to intermediates formed during the thermal decomposition of PFOS. These findings advocate for the use of additives in the thermal treatment of GAC for disposal or reuse, with the potential to reduce operating costs and mitigate the environmental impact associated with incinerating PFAS-laden wastes.

The Nature and Oxidative Reactivity of Urban Magnetic Nanoparticle Dust Provide New Insights into Potential Neurotoxicity Studies.

The recent discovery of magnetic nanoparticles (NPs) in human brain tissue has raised concerns regarding their source and neurotoxicity. As previous studies have suggested that magnetite in urban dust may be the source, we collected urban magnetic dust and thoroughly characterized the nature of ambient urban magnetic dust particles prior to investigating their neurotoxic potential. In addition to magnetite, magnetic dust contained an abundance (∼40%) of elemental iron (Fe0). The coexistence of magnetite and elemental iron was found in magnetic dust particles of inhalable (<10 µm) and nanoscale (<200 nm) size ranges with these particles small enough to enter the human brain via the respiratory tract and olfactory bulbs. The magnetic dust also contained nonferrous water-soluble metals (particularly Cu) that can induce formation of reactive oxygen species (ROS). Previous studies used engineered pure-magnetite for in vitro ROS studies. However, while magnetite was present in all magnetic dust particles collected, engineered pure-magnetite was relatively unreactive and contributed minimally to the generation of ROS. We fill a critical knowledge gap between exposure to heterogeneous ambient iron-particles and in vitro experiments with engineered versus ambient, incidental iron-bearing nanoscale minerals. Our work points to the need to further investigate the presence and properties of magnetic NPs in respirable dust with respect to their potential role in neurodegeneration.

A Laboratory Assessment of 120 Air Pollutant Emissions from Biomass and Fossil Fuel Cookstoves.

Cookstoves emit many pollutants that are harmful to human health and the environment. However, most of the existing scientific literature focuses on fine particulate matter (PM2.5) and carbon monoxide (CO). We present an extensive data set of speciated air pollution emissions from wood, charcoal, kerosene, and liquefied petroleum gas (LPG) cookstoves. One-hundred and twenty gas- and particle-phase constituents-including organic carbon, elemental carbon (EC), ultrafine particles (10-100 nm), inorganic ions, carbohydrates, and volatile/semivolatile organic compounds (e.g., alkanes, alkenes, alkynes, aromatics, carbonyls, and polycyclic aromatic hydrocarbons (PAHs))-were measured in the exhaust from 26 stove/fuel combinations. We find that improved biomass stoves tend to reduce PM2.5 emissions; however, certain design features (e.g., insulation or a fan) tend to increase relative levels of other coemitted pollutants (e.g., EC ultrafine particles, carbonyls, or PAHs, depending on stove type). In contrast, the pressurized kerosene and LPG stoves reduced all pollutants relative to a traditional three-stone fire (≥93% and ≥79%, respectively). Finally, we find that PM2.5 and CO are not strong predictors of coemitted pollutants, which is problematic because these pollutants may not be indicators of other cookstove smoke constituents (such as formaldehyde and acetaldehyde) that may be emitted at concentrations that are harmful to human health.

Detection and Sizing of Ti-Containing Particles in Recreational Waters Using Single Particle ICP-MS.

Single particle inductively coupled plasma mass spectrometry (spICP-MS) was used to detect Ti-containing particles in heavily-used bathing areas of a river (Salt River) and five swimming pools. Ti-containing particle concentrations in swimming pools ranged from 2.8 × 103 to 4.4 × 103 particles/mL and were an order of magnitude lower than those detected in the Salt River. Measurements from the Salt River showed an 80% increase in Ti-containing particle concentration over baseline concentration during peak recreational activity (at 16:00 h) in the river. Cloud point extraction followed by transmission electron microscopy with energy dispersive X-ray analysis confirmed presence of aggregated TiO2 particles in river samples, showing morphological similarity to particles present in an over-the-counter sunscreen product. The maximum particle mass concentration detected in a sample from the Salt River (659 ng/L) is only slightly lower than the predicted no effect concentration for TiO2 to aquatic organisms (< 1 µg/L).

Potential Environmental Impacts and Antimicrobial Efficacy of Silver- and Nanosilver-Containing Textiles.

For textiles containing nanosilver, we assessed benefit (antimicrobial efficacy) in parallel with potential to release nanosilver (impact) during multiple life cycle stages. The silver loading and method of silver attachment to the textile highly influenced the silver release during washing. Multiple sequential simulated household washing experiments for fabric swatches in deionized water with or without detergent showed a range of silver release. The toxicity of washing experiment supernatants to zebrafish (Danio rerio) embryos was negligible, with the exception of the very highest Ag releases (∼1 mg/L Ag). In fact, toxicity tests indicated that residual detergent exhibited greater adverse response than the released silver. Although washing the fabrics did release silver, it did not affect their antimicrobial efficacy, as demonstrated by >99.9% inhibition of E. coli growth on the textiles, even for textiles that retained as little as 2 µg/g Ag after washing. This suggests that very little nanosilver is required to control bacterial growth in textiles. Visible light irradiation of the fabrics reduced the extent of Ag release for textiles during subsequent washings. End-of-life experiments using simulated landfill conditions showed that silver remaining on the textile is likely to continue leaching from textiles after disposal in a landfill.

Sorption and desorption of organic matter on solid-phase extraction media to isolate and identify N-nitrosodimethylamine precursors.

#x02010;Nitrosodimethylamine is mutagenic in rodents, a drinking water contaminant, and a byproduct of drinking water disinfection by chloramination. Nitrosodimethylamine precursor identification leads to their control and improved understanding of nitrosodimethylamine formation during chloramination. Mass balances on nitrosodimethylamine precursors were evaluated across solid-phase extraction cartridges and in eluates to select the best combination of solid-phase media and eluent that maximized recovery of nitrosodimethylamine precursors into a solvent amenable to time-of-flight mass spectrometry analysis. After reviewing literature and comparing various solid-phase cartridges and eluent combinations, a method was obtained to efficiently recover nitrosodimethylamine precursors. The approach with the greatest recoveries of nitrosodimethylamine precursors involved cation exchange resin loaded with water samples at pH 3 and eluted with 5% NH4 OH in methanol. This indicated that nitrosodimethylamine precursors are amines that protonate at low pH and deprotonate at high pH. Quaternary amines were irreversibly sorbed to the cation exchange cartridge and did not account for a large fraction of precursors. Overall, a median recovery of 82% for nitrosodimethylamine precursors was achieved from 11 surface waters and one wastewater. Applying this method allowed discovery of methadone as a new nitrosodimethylamine precursor in wastewater effluent and drinking water treatment plant intakes.

Characterization, Recovery Opportunities, and Valuation of Metals in Municipal Sludges from U.S. Wastewater Treatment Plants Nationwide.

U.S. sewage sludges were analyzed for 58 regulated and nonregulated elements by ICP-MS and electron microscopy to explore opportunities for removal and recovery. Sludge/water distribution coefficients (KD, L/kg dry weight) spanned 5 orders of magnitude, indicating significant metal accumulation in biosolids. Rare-earth elements and minor metals (Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) detected in sludges showed enrichment factors (EFs) near unity, suggesting dust or soils as likely dominant sources. In contrast, most platinum group elements (i.e., Ru, Rh, Pd, Pt) showed high EF and KD values, indicating anthropogenic sources. Numerous metallic and metal oxide colloids (<100-500 nm diameter) were detected; the morphology of abundant aggregates of primary particles measuring <100 nm provided clues to their origin. For a community of 1 million people, metals in biosolids were valued at up to US$13 million annually. A model incorporating a parameter (KD × EF × $Value) to capture the relative potential for economic value from biosolids revealed the identity of the 13 most lucrative elements (Ag, Cu, Au, P, Fe, Pd, Mn, Zn, Ir, Al, Cd, Ti, Ga, and Cr) with a combined value of US $280/ton of sludge.

The impact of particle size, relative humidity, and sulfur dioxide on iron solubility in simulated atmospheric marine aerosols.

Iron is a limiting nutrient in about half of the world's oceans, and its most significant source is atmospheric deposition. To understand the pathways of iron solubilization during atmospheric transport, we exposed size segregated simulated marine aerosols to 5 ppm sulfur dioxide at arid (23 ± 1% relative humidity, RH) and marine (98 ± 1% RH) conditions. Relative iron solubility increased as the particle size decreased for goethite and hematite, while for magnetite, the relative solubility was similar for all of the fine size fractions (2.5-0.25 µm) investigated but higher than the coarse size fraction (10-2.5 µm). Goethite and hematite showed increased solubility at arid RH, but no difference (p > 0.05) was observed between the two humidity levels for magnetite. There was no correlation between iron solubility and exposure to SO2 in any mineral for any size fraction. X-ray absorption near edge structure (XANES) measurements showed no change in iron speciation [Fe(II) and Fe(III)] in any minerals following SO2 exposure. SEM-EDS measurements of SO2-exposed goethite revealed small amounts of sulfur uptake on the samples; however, the incorporated sulfur did not affect iron solubility. Our results show that although sulfur is incorporated into particles via gas-phase processes, changes in iron solubility also depend on other species in the aerosol.

Nanoparticle size detection limits by single particle ICP-MS for 40 elements.

The quantification and characterization of natural, engineered, and incidental nano- to micro-size particles are beneficial to assessing a nanomaterial's performance in manufacturing, their fate and transport in the environment, and their potential risk to human health. Single particle inductively coupled plasma mass spectrometry (spICP-MS) can sensitively quantify the amount and size distribution of metallic nanoparticles suspended in aqueous matrices. To accurately obtain the nanoparticle size distribution, it is critical to have knowledge of the size detection limit (denoted as Dmin) using spICP-MS for a wide range of elements (other than a few available assessed ones) that have been or will be synthesized into engineered nanoparticles. Herein is described a method to estimate the size detection limit using spICP-MS and then apply it to nanoparticles composed of 40 different elements. The calculated Dmin values correspond well for a few of the elements with their detectable sizes that are available in the literature. Assuming each nanoparticle sample is composed of one element, Dmin values vary substantially among the 40 elements: Ta, U, Ir, Rh, Th, Ce, and Hf showed the lowest Dmin values, ≤10 nm; Bi, W, In, Pb, Pt, Ag, Au, Tl, Pd, Y, Ru, Cd, and Sb had Dmin in the range of 11-20 nm; Dmin values of Co, Sr, Sn, Zr, Ba, Te, Mo, Ni, V, Cu, Cr, Mg, Zn, Fe, Al, Li, and Ti were located at 21-80 nm; and Se, Ca, and Si showed high Dmin values, greater than 200 nm. A range of parameters that influence the Dmin, such as instrument sensitivity, nanoparticle density, and background noise, is demonstrated. It is observed that, when the background noise is low, the instrument sensitivity and nanoparticle density dominate the Dmin significantly. Approaches for reducing the Dmin, e.g., collision cell technology (CCT) and analyte isotope selection, are also discussed. To validate the Dmin estimation approach, size distributions for three engineered nanoparticle samples were obtained using spICP-MS. The use of this methodology confirms that the observed minimum detectable sizes are consistent with the calculated Dmin values. Overall, this work identifies the elements and nanoparticles to which current spICP-MS approaches can be applied, in order to enable quantification of very small nanoparticles at low concentrations in aqueous media.

Characterization of food-grade titanium dioxide: the presence of nanosized particles.

Titanium dioxide (TiO2) is widely used in food products, which will eventually enter wastewater treatment plants and terrestrial or aquatic environments, yet little is known about the fraction of this TiO2 that is nanoscale, or the physical and chemical properties of TiO2 that influence its human and environmental fate or toxicity. Instead of analyzing TiO2 properties in complex food or environmental samples, we procured samples of food-grade TiO2 obtained from global food suppliers and then, using spectroscopic and other analytical techniques, quantified several parameters (elemental composition, crystal structure, size, and surface composition) that are reported to influence environmental fate and toxicity. Another sample of nano-TiO2 that is generally sold for catalytic applications (P25) and widely used in toxicity studies, was analyzed for comparison. Food-grade and P25 TiO2 are engineered products, frequently synthesized from purified titanium precursors, and not milled from bulk scale minerals. Nanosized materials were present in all of the food-grade TiO2 samples, and transmission electron microscopy showed that samples 1-5 contained 35, 23, 21, 17, and 19% of nanosized primary particles (<100 nm in diameter) by number, respectively (all primary P25 particles were <100 nm in diameter). Both types of TiO2 aggregated in water with an average hydrodynamic diameter of >100 nm. Food-grade samples contained phosphorus (P), with concentrations ranging from 0.5 to 1.8 mg of P/g of TiO2. The phosphorus content of P25 was below inductively coupled plasma mass spectrometry detection limits. Presumably because of a P-based coating detected by X-ray photoelectron spectroscopy, the ζ potential of the food-grade TiO2 suspension in deionized water ranged from -10 to -45 mV around pH 7, and the iso-electric point for food-grade TiO2 (

Identifying indoor environmental patterns from bioaerosol material using HPLC.

A substantial portion of the atmospheric particle budget is of biological origin (human and animal dander, plant and insect debris, etc.). These bioaerosols can be considered information-rich packets of biochemical data specific to the organism of origin. In this study, bioaerosol samples from various indoor environments were analyzed to create identifiable patterns attributable to a source level of occupation. Air samples were collected from environments representative of human high-traffic- and low-traffic indoor spaces along with direct human skin sampling. In all settings, total suspended particulate matter was collected and the total aerosol protein concentration ranged from 0.03 to 1.2 µg/m(3). High performance liquid chromatography was chosen as a standard analysis technique for the examination of aqueous aerosol extracts to distinguish signatures of occupation compared to environmental background. The results of this study suggest that bioaerosol "fingerprinting" is possible with the two test environments being distinguishable at a 97% confidence interval.

Characterization of aerosol emissions from wastewater aeration basins.

UNLABELLED: The emission of particulate matter (PM10 and PM2.5) and ammonia (NH3) by aeration processes at wastewater treatment plants (WWTPs) with and without odor control units was examined. Local concentrations of PM2.5, PM10, and NH3 at the aeration basins were within urban ranges. Emission fluxes of NH3 and PM2.5 for a medium-sized WWTP were determined to be 136 g day(-1) and 43 g day(-1), respectively, which are not substantial emission fluxes for urban environments. Odor control treatment using a granulated activated carbon bed reduced aerosol and NH3 emissions substantially. Detection of sterols, in particular the fecal sterol campesterol, in the PM clearly demonstrates aerosolization of wastewater components in the aeration process. The presence of campesterol in PM2.5 at a remote fenceline location in a WWTP facility illustrates that wastewater components are aerosolized in the fine PM fraction and transported beyond the facilities. IMPLICATIONS: Wastewater treatment plants are potential emission sources of particulate matter and gases. This study characterized particulate matter emissions from aeration basins and quantified emissions fluxes of particulate matter and NH3. While fine and coarse particles as well as NH3 are being emitted, the overall emissions are small compared to other urban sources. However, fecal steroid presence in particles at the fence of a treatment plant demonstrates that wastewater material is getting aerosolized and transported beyond the facilities.

Characterization of summertime coarse particulate matter in the Desert Southwest--Arizona, USA.

UNLABELLED: A year-long study was conducted in Pinal County, AZ, to characterize coarse (2.5 - 10 microm aerodynamic diameter, AD) and fine (< 2.5 microm AD) particulate matter (PMc and PMf, respectively) to further understand spatial and temporal variations in ambient PM concentrations and composition in rural, arid environments. Measurements of PMc and PMf mass, ions, elements, and carbon concentrations at one-in-six day resolution were obtained at three sites within the region. Results from the summer of 2009 and specifically the local monsoon period are presented. The summer monsoon season (July - September) and associated rain and/or high wind events, has historically had the largest number of PM10 NAAQS exceedances within a year. Rain events served to clean the atmosphere, decreasing PMc concentrations resulting in a more uniform spatial gradient among the sites. The monsoon period also is characterized by high wind events, increasing PMc mass concentrations, possibly due to increased local wind-driven soil erosion or transport. Two PM10 NAAQS exceedances at the urban monitoring site were explained by high wind events and can likely be excluded from PM10 compliance calculations as exceptional events. At the more rural Cowtown site, PM10 NAAQS exceedances were more frequent, likely due to the impact from local dust sources. PM mass concentrations at the Cowtown site were typically higher than at the Pinal County Housing and Casa Grande sites. Crustal material was equal to 52-63% of the PMc mass concentration on average. High concentrations of phosphate and organic carbon found at the rural Cowtown were associated with local cattle feeding operations. A relatively high correlation between PMc and PMf (R2 = 0.63) indicated that the lower tail of the coarse particle fraction often impacts the fine particle fraction, increasing the PMf concentrations. Therefore, reductions in PMc sources will likely also reduce PMf concentrations, which also are near the value of the 24-hr PM2.5 NAAQS. IMPLICATIONS: In the desert southwest, summer monsoons are often associated with above average PM10 (< 10 microm AD) mass concentrations. Competing influences of monsoon rain and wind events showed that rain suppresses ambient concentrations while high wind increase them. In this region, the PMc fraction dominates PM10 and crustal sources contribute 52-63% to local PMc mass concentrations on average. Cattle feedlot emissions are also an important source and a unique chemical signature was identified for this source. Observations suggest monsoon wind events alone cannot explain PM10 NAAQS exceedances, thus requiring these values to remain in compliance calculations rather than being removed as exceptional wind events.

Do Surface Charges on Polymeric Filters and Airborne Particles Control the Removal of Nanoscale Aerosols by Polymeric Facial Masks?

The emergence of facial masks as a critical health intervention to prevent the spread of airborne disease and protect from occupational nanomaterial exposure highlights the need for fundamental insights into the interaction of nanoparticles (<200 nm) with modern polymeric mask filter materials. While most research focuses on the filtration efficiency of airborne particles by facial masks based on pore sizes, pressure drop, or humidity, only a few studies focus on the importance of aerosol surface charge versus filter surface charge and their role in the net particle filtration efficiency of mask filters. In this study, experiments were conducted to assess mask filter filtration efficiency using positively and negatively charged polystyrene particles (150 nm) as challenge aerosols at varying humidity levels. Commercial masks with surface potential (Ψf) in the range of -10 V to -800 V were measured by an electrostatic voltmeter and used for testing. Results show that the mask filtration efficiency is highly dependent on the mask surface potential as well as the charge on the challenge aerosol, ranging from 60% to 98%. Eliminating the surface charge results in a maximum 43% decrease in filtration efficiency, emphasizing the importance of electrostatic charge interactions during the particle capture process. Moreover, increased humidity can decrease the surface charge on filters, thereby decreasing the mask filtration efficiency. The knowledge gained from this study provides insight into the critical role of electrostatic attraction in nanoparticle capture mechanisms and benefits future occupational and environmental health studies.

Detection of carbon nanotubes in environmental matrices using programmed thermal analysis.

Carbon nanotube (CNT) production is rapidly growing, and there is a need for robust analytical methods to quantify CNTs at environmentally relevant concentrations in complex organic matrices. Because physical and thermal properties vary among different types of CNTs, we studied 14 single-walled (SWCNTs) and multiwalled CNTs (MWCNTs). Our aim was to apply a classic analytical air pollution method for separating organic (OC) and elemental carbon (EC) (thermal optical transmittance/reflectance, TOT/R) to environmental and biological matrices and CNTs. The TOT/R method required significant modification for this analysis, which required a better understanding of the thermal properties of CNTs. An evaluation of the thermal properties of CNTs revealed two classes that could be differentiated using Raman spectroscopy: thermally "weak" and "strong." Using the programmed thermal analysis (PTA) method, we optimized temperature programs and instituted a set of rules for defining the separation of OC and EC to quantify a broad range of CNTs. The combined Raman/PTA method was demonstrated using two environmentally relevant matrices (cyanobacteria (CB) and urban air). Thermal evaluation of CB revealed it to be a complex matrix with interference occurring for both weak and strong CNTs, and thus a pretreatment method was necessary. Strong CNT masses of 0.51, 2.7, and 11 µg, corresponding to concentrations of 10, 54, and 220 µg CNT/g CB, yielded recoveries of 160 ± 29%, 99 ± 1.9%, and 96 ± 3.0%, respectively. Urban air was also a complex matrix and contained a significant amount (12%) of background EC that interfered greatly with weak CNTs and minimally with strong CNTs. The current detection limit at 99% confidence for urban air samples and strong CNTs is 55 ng/m(3) (0.33 µg). Overall, the PTA method presented here provides an initial approach for quantifying a wide range of CNTs, and we identify specific future research needs to eliminate potential interferences and lower detection limits.

Adsorption of N-nitrosodimethylamine precursors by powdered and granular activated carbon.

Activated carbon (AC) has been shown to remove precursors of halogenated disinfection byproducts. Granular and powdered activated carbon (GAC, PAC) were investigated for their potential to adsorb N-nitrosodimethylamine (NDMA) precursors from blends of river water and effluent from a wastewater treatment plant (WWTP). At bench scale, waters were exposed to lignite or bituminous AC, either as PAC in bottle point experiments or as GAC in rapid small-scale column tests (RSSCTs). NDMA formation potential (FP) was used as a surrogate for precursor removal. NDMA FP was reduced by 37, 59, and 91% with 3, 8, and 75 mg/L of one PAC, respectively, with a 4-h contact time. In RSSCTs and in full-scale GAC contactors, NDMA FP removal always exceeded that of the bulk dissolved organic carbon (DOC) and UV absorbance at 254 nm. For example, whereas DOC breakthrough exceeded 90% of its influent concentration after 10,000 bed volumes of operation in an RSSCT, NDMA FP was less than 40% of influent concentration after the same bed life of the GAC. At full or pilot scale, high NDMA FP reduction ranging from >60 to >90% was achieved across GAC contactors, dependent upon the GAC bed life and/or use of a preoxidant (chlorine or ozone). In all experiments, NDMA formation was not reduced to zero, which suggests that although some precursors are strongly sorbed, others are not. This is among the first studies to show that AC is capable of adsorbing NDMA precursors, but further research is needed to better understand NDMA precursor chemical properties (e.g., hydrophobicity, molecular size) and evaluate how best to incorporate this finding into full-scale designs and practice.

Exploring the feasibility of bioaerosol analysis as a novel fingerprinting technique.

The purpose of this review is to investigate the feasibility of bioaerosol fingerprinting based on current understanding of cellular debris (with emphasis on human-emitted particulates) in aerosols and arguments regarding sampling, sensitivity, separations, and detection schemes. Target aerosol particles include cellular material and proteins emitted by humans, animals, and plants and can be regarded as information-rich packets that carry biochemical information specific to the living organisms present where the sample is collected. In this work we discuss sampling and analysis techniques that can be integrated with molecular (e.g. protein)-detection procedures to properly assess the aerosolized cellular material of interest. Developing a detailed understanding of bioaerosol molecular profiles in different environments suggests exciting possibilities of bioaerosol analysis with applications ranging from military defense to medical diagnosis and wildlife identification.

Beyond nC60: strategies for identification of transformation products of fullerene oxidation in aquatic and biological samples.

Owing to their exceptional properties and versatility, fullerenes are in widespread use for numerous applications. Increased production and use of fullerenes will inevitably result in accelerated environmental release. However, study of the occurrence, fate, and transport of fullerenes in the environment is complicated because a variety of surface modifications can occur as a result of either intentional functionalization or natural processes. To gain a better understanding of the effect and risk of fullerenes on environmental health, it is necessary to acquire reliable data on the parent compounds and their congeners. Whereas currently established quantification methods generally focus on analysis of unmodified fullerenes, we discuss in this review the occurrence and analysis of oxidized fullerene congeners (i.e., their corresponding epoxides and polyhydroxylated derivatives) in the environment and in biological specimens. We present possible strategies for detection and quantification of parent nanomaterials and their various derivatives.

Processing of atmospheric polycyclic aromatic hydrocarbons by fog in an urban environment.

Polycyclic aromatic hydrocarbons (PAH) are ubiquitous pollutants in the atmosphere, predominantly known for their toxicity. Although there has been substantial work on the atmospheric degradation of PAH, little is known about how the presence of atmospheric droplets (e.g., a fog cloud) affects the fate of PAH. In order to assess the processing of PAH and their corresponding oxidation products during a fog event, two field-sampling campaigns in Fresno, CA and Davis, CA were conducted. The simultaneous evaluation of concentrations of the PAH and oxygenated polycyclic aromatic compounds (OPAC) in the gas phase, particulate matter and fog water droplets before, during and after fog allows for the characterization of transformative and transport processes in a fog cloud. By tracking the ratio of OPAC to PAH in the individual atmospheric phases, two major polycyclic aromatic compounds-processing pathways can be identified: (i) the dissolution of OPAC from particulate matter and (ii) the uptake and oxidation of PAH in the fog water droplets. Wet deposition steadily decreases the pollutant concentration in the fog cloud droplets during a fog event; however, uptake and concentration via evaporative water loss upon the dissipation of a fog cloud cause an increase in the atmospheric pollutant concentration.

Seasonal atmospheric water harvesting yield and water quality using electric-powered desiccant and compressor dehumidifiers.

Atmospheric water harvesting (AWH) is an emerging technology for decentralized water supply and is proving to be viable for use in emergencies, military deployment, and sustainable industries. The atmosphere is a freshwater reservoir that contains 12,900 km3 of water, 6-fold more than the volume of global rivers. Dehumidification water harvesting technologies can be powered by solar, wind, or electric sources. Compressor/refrigerant-based dehumidifiers operate via dew point condensation and provide a cold surface upon which water vapor can condense. Conversely, desiccant-based technologies saturate water vapor using a sorbent that is then heated, and the supersaturated water vapor condenses on a surface when interacting with cooler ambient process air. This work compares productivity, energy consumption, efficiency, cost and quality of water produced of two water-harvesting mechanisms. Electric-powered compressor and desiccant dehumidifiers were operated outdoors for more than one year in the arid southwestern USA, where temperatures ranged from 3.1 to 43.7 °C and relative humidity (RH) ranged from 6 to 85%. The compressor system harvested >2-fold more water than the desiccant system when average RH during the run cycle was >30%, average temperature was >20 °C, and average dew point temperature was >5 °C. Desiccant systems performed more favorably when average RH during the run cycle was <30%, average temperature was <20 °C, and average dew point temperature was <5 °C. Water collected by compressor-based technologies had conductivity up to 180 µS/cm, turbidity up to 190 NTU, and aluminum, iron and manganese near or above the US EPA secondary drinking water standard. Dissolved organic carbon (DOC) averaged <2 mg C/L but ranged up to 12 mg C/L. Water collected by desiccant-based technologies had significantly lower conductivity, metals, and turbidity, and DOC was always <6 mg/L. Aldehydes such as formaldehyde and acetaldehyde and carboxylic acids such as formic acid and acetic acid were primary contributors to DOC. The differences in harvested water quality were attributed to differences in the condensation method between compressor and desiccant AWH technologies. Multiple strategies could be employed to prevent these volatile organic compounds (VOCs) from contributing to DOC in harvested water, such as pretreating air to remove VOCs or post-treating DOC in harvested liquid water.