Permeability and diffusion resistance of porous membranes: Analytical theory and its numerical test.

This study is devoted to the transport of neutral solutes through porous flat membranes, driven by the solute concentration difference in the reservoirs separated by the membrane. Transport occurs through membrane channels, which are assumed to be non-overlapping, identical, straight cylindrical pores connecting the reservoirs. The key quantities characterizing transport are membrane permeability and its diffusion resistance. Such transport problems arising in very different contexts, ranging from plant physiology and cell biology to chemical engineering, have been studied for more than a century. Nevertheless, an expression giving the permeability for a membrane of arbitrary thickness at arbitrary surface densities of the channel openings is still unknown. Here, we fill in the gap and derive such an expression. Since this expression is approximate, we compare its predictions with the permeability obtained from Brownian dynamics simulations and find good agreement between the two.

A protocol for fabrication of polymer monolithic capillary columns and tuning the morphology targeting high-resolution bioanalysis in gradient-elution liquid chromatography.

Polymer monolithic stationary phases are designed as a continuous interconnected globular material perfused by macropores. Like packed column, where separation efficiency is related to particle diameter, the efficiency of monoliths can be enhanced by tuning the size of both the microglobules and macropores. This protocol described the synthesis of poly(styrene-co-divinylbenzene) monolithic stationary phases in capillary column formats. Moreover, guidelines are provided to tune the macropore structure targeting high-throughput and high-resolution monolith chromatography. The versatility of these columns is exemplified by their ability to separate tryptic digests, intact proteins, and oligonucleotides under a variety of chromatographic conditions. The repeatability of the presented column fabrication process is demonstrated by the successful creation of 12 columns in three different column batches, as evidenced by the consistency of retention times (coefficients of variance [c.v.] = 0.9%), peak widths (c.v. = 4.7%), and column pressures (c.v. = 3.1%) across the batches.

Integrated Platform Addressing the Finger-Prick Blood Processing Challenges of Point-of-Care Electrical Biomarker Testing.

Continued advances in label-free electrical biosensors pave the way to simple, rapid, cost-effective, high-sensitivity, and quantitative biomarker testing at the point-of-care setting that would profoundly transform healthcare. However, implementation in routine diagnostics is faced with significant challenges associated with the inherent requirement for biofluid sample processing before and during testing. We present here a simple yet robust autonomous finger-prick blood sample processing platform integrated with nanoscale field-effect transistor biosensors and demonstrate the feasibility of measuring the SARS-CoV-2 nucleocapsid protein. The 3D-printed platform incorporates a high-yield blood-to-plasma separation module and a delay valve designed to terminate the assay at a specific time. The platform is driven by hydrostatic pressure to efficiently and automatically dispense plasma and washing/measurement buffer to the nanosensors. Our model study demonstrates the feasibility of detecting down to 1.4 pg/mL of the SARS-CoV-2 nucleocapsid protein within 25 min and with only minimal operator intervention.

Non-ionic Surface Active Agents as Additives toward a Universal Porogen System for Porous Polymer Monoliths.

The influence of the addition of various non-ionic surfactants to poly(ethylene glycol) diacrylate-based monolith formulations was studied. Eight non-ionic surfactants having different chemistries were chosen for this study. These surfactants were Brij L4, Span 80, IGEPAL CO-520, Tergitol 15S9, 2,4,7,9-tetramethyl-5-decyne-4,7-diol ethoxylate, Tween 40, Triton X-405, and Tetronic 701. The chemical structures of these surfactants have a variety of functional groups and cover a wide range of molecular weights (360-3600 g/mol), viscosities (60-1500 cP), and hydrophilic-lipophilic balances (1.0-17.6). The formed polymers were characterized by scanning electron microscopy, surface area measurement by the Brunauer-Emmet-Teller method, elemental analysis, and Fourier transform infrared. Four formulations, involving the use of surfactants, resulted in permeable materials when prepared in 150 µm ID silica capillaries. The chromatographic performance of the resulting columns in reversed-phase mode was evaluated and compared using a mixture of alkyl benzenes as test analytes. The highest efficiency and methylene selectivity were observed when Tween 40 was included in the formulation, using decane/decanol/dodecanol as coporogens. This porogenic mixture was successfully used for preparation of monolithic columns from a selection of methacrylate- and styrene-based monomers, including butylmethacrylate, hydroxyethymethacrylate, laurylmethacrylate, glycidyl methacrylate, bisphenol diacrylate, benzylmethacrylate, and N,N-dimethylacrylamide, as well as for divinylbenzene. These results show the applicability of this porogenic mixture for a variety of monolithic formulations, providing an approach for developing a universal porogen system.

Biocompatible functionalisation of nanoclays for improved environmental remediation.

Among the wide range of materials used for remediating environmental contaminants, modified and functionalised nanoclays show particular promise as advanced sorbents, improved dispersants, or biodegradation enhancers. However, many chemically modified nanoclay materials are incompatible with living organisms when they are used in natural systems with detrimental implications for ecosystem recovery. Here we critically review the pros and cons of functionalised nanoclays and provide new perspectives on the synthesis of environmentally friendly varieties. Particular focus is given to finding alternatives to conventional surfactants used in modified nanoclay products, and to exploring strategies in synthesising nanoclay-supported metal and metal oxide nanoparticles. A large number of promising nanoclay-based sorbents are yet to satisfy environmental biocompatibility in situ but opportunities are there to tailor them to produce "biocompatible" or regenerative/reusable materials.

Preconcentration by solvent removal: techniques and applications.

Preconcentration is the aspect of analytical method development covering the need to improve detection sensitivity. This review collects the advances in a diversity of approaches to achieve preconcentration by solvent removal. Evaporation in microfluidic and paper-based devices is reported in a variety of forms and later compared to membrane-assisted evaporation. Sample partitioning in an immiscible fluid is also described. The reported methodologies highlight the need to achieve good control of the gas-liquid interface to obtain accurate results. A comprehensive comparison of different strategies is presented here discussing their benefits and drawbacks as well as the research needs in this area. Graphical abstract ᅟ.

Using natural deep eutectic solvents for the extraction of metabolites in Byrsonima intermedia leaves.

Natural deep eutectic solvents have been used as an alternative to organic solvents for the extraction of plants metabolites, allowing for the extraction of compounds of different polarities, while being inexpensive, non-toxic, and easy to prepare. This work presents the comparison of the chromatographic profiles by high-performance liquid chromatography with diode-array detection obtained from Byrsonima intermedia (Malpighiaceae) using five choline chloride-based natural deep eutectic solvents, in addition to the most used traditional extraction solvents, methanol/water 7:3 and ethanol/water 7:3 v/v. A reference extract was used to tentatively identify compounds by high-performance liquid chromatography with tandem mass spectrometry. The water content appeared to be important for the extraction efficiency and the mixture choline chloride/glycerol was shown to be the best candidate for efficiently extracting this matrix when compared with the traditional extraction media in addition to being far greener as shown by the environmental analysis tool. Seven phenolic compounds (digalloyl quinic acid, proanthocyanidin dimer, galloylproanthocyanidin dimer, quercetin-O-hexoside, galloyl quercetin hexoside, quercetin-O-pentoside, and galloyl quercetin pentoside) were tentatively identified in all extracts. Moreover, the influence of these solvents on the antioxidant activity of the extracts was studied and the results for choline chloride/glycerol extracts were very similar to that of the traditional extraction solvents.

Precise, accurate and user-independent blood collection system for dried blood spot sample preparation.

An accurate and precise 3 µL blood collection and dispensing system is presented for the preparation of dried blood spot (DBS) samples. Using end-to-end glass capillaries in conjugation with pre-punched DBS pads, a blood micro collection system was developed to eliminate the haematocrit dispersion, widely associated with DBS technology, while providing better levels of accuracy and precision during sample preparation. This methodology is compared to traditional micro-volume blood collection systems, such as a pipette and a digitally controlled analytical syringe. Results showed that % of recovery for the capillary methodology was closer to 100% across the three haematocrit (HCT) levels tested and when prepared by two users (98 to 100% for capillaries, 78 to 104% for pipette and 93 to 97% for digital syringe) attesting a higher accuracy. Additionally, by taking advantage of the capillary action mechanism to collect and dispense autonomously the desired volume of blood onto the DBS pad, coefficients of variation between two individuals were significantly lower than with standard methodologies (capillaries-0.05 to 0.77%, pipette-12.71 to 18.53% and digital syringe-0.72 to 1.77%). This alternate aspiration and dispensing methodology could be used by different users without compromising accuracy or precision when handling low volumes of blood during the pre-analytical steps. Graphical abstract Comparison of novel capillary dispensing methodology for dried blood spot sample preparation with pipette and digital syringe methodologies through accuracy and precision measurements of caffeine.

Correction to: Precise, accurate and user-independent blood collection system for dried blood spot sample preparation.

The authors would like to call the reader's attention to the following: The instrument they used to measure the volumetric precision of the dispensing devices is not called "VMS" but "PCS®".

Natural deep eutectic solvents as the major mobile phase components in high-performance liquid chromatography-searching for alternatives to organic solvents.

Over the past six decades, acetonitrile (ACN) has been the most employed organic modifier in reversed-phase high-performance liquid chromatography (RP-HPLC), followed by methanol (MeOH). However, from the growing environmental awareness that leads to the emergence of "green analytical chemistry," new research has emerged that includes finding replacements to problematic ACN because of its low sustainability. Deep eutectic solvents (DES) can be produced from an almost infinite possible combinations of compounds, while being a "greener" alternative to organic solvents in HPLC, especially those prepared from natural compounds called natural DES (NADES). In this work, the use of three NADES as the main organic component in RP-HPLC, rather than simply an additive, was explored and compared to the common organic solvents ACN and MeOH but additionally to the greener ethanol for separating two different mixtures of compounds, one demonstrating the elution of compounds with increasing hydrophobicity and the other comparing molecules of different functionality and molar mass. To utilize NADES as an organic modifier and overcome their high viscosity monolithic columns, temperatures at 50 °C and 5% ethanol in the mobile phase were used. NADES are shown to give chromatographic performances in between those observed for ACN and MeOH when eluotropic strength, resolution, and peak capacity were taken into consideration, while being less environmentally impactful as shown by the HPLC-Environmental Assessment Tool (HPLC-EAT) metric. With the development of proper technologies, DES could open a new class of mobile phases increasing the possibilities of new separation selectivities while reducing the environmental impact of HPLC analyses. Graphical abstract Natural deep eutectic solvents versus traditional solvents in HPLC.

Longitudinal On-Column Thermal Modulation for Comprehensive Two-Dimensional Liquid Chromatography.

Longitudinal on-column thermal modulation for comprehensive two-dimensional liquid chromatography is introduced. Modulation optimization involved a systematic investigation of heat transfer, analyte retention, and migration velocity at a range of temperatures. Longitudinal on-column thermal modulation was realized using a set of alkylphenones and compared to a conventional valve-modulator employing sample loops. The thermal modulator showed a reduced modulation-induced pressure impact than valve modulation, resulting in reduced baseline perturbation by a factor of 6; yielding a 6-14-fold improvement in signal-to-noise. A red wine sample was analyzed to demonstrate the potential of the longitudinal on-column thermal modulator for separation of a complex sample. Discrete peaks in the second dimension using the thermal modulator were 30-55% narrower than with the valve modulator. The results shown herein demonstrate the benefits of an active focusing modulator, such as reduced detection limits and increased total peak capacity.

Poly(ethylene glycol) functionalization of monolithic poly(divinyl benzene) for improved miniaturized solid phase extraction of protein-rich samples.

Non-specific protein adsorption on hydrophobic solid phase extraction (SPE) adsorbents can reduce the efficacy of purification. To improve sample clean-up, poly(divinyl benzene) (PDVB) monoliths grafted with hydrophilic polyethylene glycol methacrylate (PEGMA) were developed. Residual vinyl groups (RVGs) of the PDVB were employed as anchor points for PEGMA grafting. Two PEGMA monomers, M n 360 and 950, were compared for graft solutions containing 5-20% monomer. Protein binding was qualitatively screened using fluorescently labeled human serum albumin (HSA) to determine optimal PEGMA concentration. The fluorescent signal of PDVB was reduced for PDVB-g-PEGMA360 (10%) and PDVB-g-PEGMA950 (20%). The PEGMA content (w/w%) was quantified by solid state 1H NMR to be 29.9 ± 1.6% for PDVB-g-PEGMA360 and 7.7 ± 1.2% for PDVB-g-PEGMA950. To assess adsorbent performance breakthrough curves for PDVB, PDVB-g-PEGMA360 and PDVB-g-PEGMA950 were compared. The breakthrough volume (V B) and shape of the curve for PDVB-g-PEGMA950 were maintained relative to PDVB (2.3 and 2.8 mL, respectively). A reduced V B of 0.5 mL and shallow breakthrough curve indicated PDVB-g-PEGMA360 was not suitable for SPE. A high ibuprofen recovery of 92 ± 0.30 and 78 ± 0.93% was seen for PDVB and PDVB-g-PEGMA950, respectively. Protein adsorption was reduced from 31 ± 2.41 to 12 ± 0.49% for PDVB and PDVB-g-PEGMA950, respectively. SPE of ibuprofen from plasma was compared for PDVB and PDVB-g-PEGMA950 by at-line electrospray ionization mass spectrometry (ESI-MS). PDVB-g-PEGMA950 demonstrated a threefold increase in assay sensitivity indicating a superior analyte purification.

Discovery of Biomarkers for Tasmanian Devil Cancer (DFTD) by Metabolic Profiling of Serum.

Devil facial tumor disease (DFTD) is a transmissible cancer threatening Tasmanian devils (Sarcophilus harrisii) with extinction. There is no preclinical test available for DFTD, and thus our aim was to find biomarkers for DFTD by metabolic fingerprinting. Seventy serum samples from wild Tasmanian devils (35 controls, 35 with tumors) were analyzed by liquid chromatography-high-resolution mass spectrometry. Features were selected by multivariate models (PLS/DA, random forests) comparing age-matched training set (n = 20 × 2) and further complying with fold-change threshold (≥1.4) and Mann-Whitney U-tests with correction for multiple hypotheses (false discovery rate (FDR) q < 0.05). An array of overlapping peptide segments of the N-terminal end of fibrinogen were the strongest positive DFTD markers. These peptides recorded fold-change up to 90, FDR-corrected p value below 0.01, and area under ROC curve of at least 0.80 and also correlated with tumor size (Spearman R > 0.45, p < 0.01). Additional potential markers included amino acid and lipid metabolites, while cortisol and urea were the most significant health predictors (AUC ≥ 0.90). PLS/DA resulted in AUC = 0.997 for the training set and overall sensitivity of 91% and specificity of 97%. A support vector machine model utilizing only the major peptide marker and seven other metabolites led to overall 94% sensitivity and specificity. The novel findings in this first DFTD metabolomics study shed light on metabolic changes in Tasmanian devils affected by DFTD and provide a valuable step toward the development of prognostic biomarkers.

Tryptophan metabolism, its relation to inflammation and stress markers and association with psychological and cognitive functioning: Tasmanian Chronic Kidney Disease pilot study.

BACKGROUND: Adults with chronic kidney disease (CKD) exhibit alterations in tryptophan metabolism, mainly via the kynurenine pathway, due to higher enzymatic activity induced mainly by inflammation. Indoles produced by gut-microflora are another group of tryptophan metabolites related to inflammation and conditions accompanying CKD. Disruptions in tryptophan metabolism have been associated with various neurological and psychological disorders. A high proportion of CKD patients self-report symptoms of depression and/or anxiety and decline in cognitive functioning. This pilot study examines tryptophan metabolism in CKD and explores associations with psychological and cognitive functioning. METHODS: Twenty-seven adults with CKD were part of 49 patients recruited to participate in a prospective pilot study, initially with an eGFR of 15-29 mL/min/1.73 m2. Only participants with viable blood samples and complete psychological/cognitive data at a 2-year follow-up were included in the reported cross-sectional study. Serum samples were analysed by Liquid Chromatography coupled to Mass Spectrometry, for tryptophan, ten of its metabolites, the inflammation marker neopterin and the hypothalamic-pituitary-adrenal (HPA) axis marker cortisol. RESULTS: The tryptophan breakdown index (kynurenine / tryptophan) correlated with neopterin (Pearson R = 0.51 P = 0.006) but not with cortisol. Neopterin levels also correlated with indoxyl sulfate (R = 0.68, P < 0.0001) and 5 metabolites of tryptophan (R range 0.5-0.7, all P ≤ 0.01), which were all negatively related to eGFR (P < 0.05). Higher levels of kynurenic acid were associated with lower cognitive functioning (Spearman R = -0.39, P < 0.05), while indole-3 acetic acid (IAA) was correlated with anxiety and depression (R = 0.52 and P = 0.005, R = 0.39 and P < 0.05, respectively). CONCLUSIONS: The results of this preliminary study suggest the involvement of inflammation in tryptophan breakdown via the kynurenine pathway, yet without sparing tryptophan metabolism through the 5-HT (serotonin) pathway in CKD patients. The multiple moderate associations between indole-3 acetic acid and psychological measures were a novel finding. The presented pilot data necessitate further exploration of these associations within a large prospective cohort to assess the broader significance of these findings.

Simple and robust monitoring of ethanol fermentations by capillary electrophoresis.

Free-solution capillary electrophoresis (CE), or capillary zone electrophoresis, with direct UV detection was used for the first time for the determination of mono- and disaccharides, sugar alcohols, and ethanol in fermentation broths. Sample preparation proved to be minimal: no derivatization or specific sample purification was needed. The CE conditions can be adapted to the type of fermentation by simply altering the background electrolyte (BGE). KOH (130 mM) or NaOH (130 mM) as the BGE led to the fastest analysis time when monitoring simple fermentations. A mixture of 65 mM NaOH and 65 mM LiOH led to a 19% improvement in resolution for a complex mixture of carbohydrates. Quantification of a simple carbohydrate fermentation by CE showed values in close agreement with that of high-performance anion exchange chromatography and high-performance liquid chromatography (HPLC) on a cation exchange resin. For complex fermentations, quantification of carbohydrates by HPLC and CE led to similar results, whereas CE requires an injection volume of only 10-20 nL. Analysis of an ethanol fermentation of hydrolyzed plant fiber demonstrated the robustness of the separation and detection of carbohydrates, as well as ethanol. Ethanol determination is achieved by coupling the CE method to pressure mobilization, using the same instrument and the same sample.

Acetone as a greener alternative to acetonitrile in liquid chromatographic fingerprinting.

A considerable amount of chemical waste from liquid chromatography analysis is generated worldwide. Acetonitrile is the most employed solvent in liquid chromatography analyses since it exhibits favorable physicochemical properties for separation and detection, but it is an unwelcome solvent from an environmental point of view. Acetone might be a much greener alternative to replace acetonitrile in reversed-phase liquid chromatography, since both share similar physicochemical properties, but its applicability with ultraviolet absorbance-based detectors is limited. In this work, a reference method using acetonitrile and high-performance liquid chromatography coupled to an ultraviolet photodiode array detector coupled to a corona charged aerosol detector system was developed to fingerprint a complex sample. The possibility of effectively substituting acetonitrile with acetone was investigated. Design of experiments was adopted to maximize the number of peaks acquired in both fingerprint developments. The methods with acetonitrile or acetone were successfully optimized and proved to be statistically similar when only the number of peaks or peak capacity was taken into consideration. However, the superiority of the latter was evidenced when parameters of separation and those related to greenness were heuristically combined. A green, comprehensive, time- and resource-saving approach is presented here, which is generic and applicable to other complex matrices. Furthermore, it is in line with environmental legislation and analytical trends.

Semiautomated pH gradient ion-exchange chromatography of monoclonal antibody charge variants.

A new approach using a chromatography system equipped with isocratic pumps and an electrolytic eluent generator (EG) is introduced, replacing external pH gradient delivery using conventional gradient systems, in which bottled buffers with preadjusted pH are mixed using a gradient pump. The EG is capable of generating high purity base or acid required for online preparation of the buffer at the point of use, utilizing deionized water as the only carrier stream. Typically, the buffer was generated from online titration of a reagent composed of low molecular weight amines. The reagent was delivered isocratically into a static mixing tee, where it was titrated to the required pH with electrolytically generated base or acid. The required pH gradient was thus conveniently generated by electrically controlling the concentration of titrant. Also, since the pH was adjusted at the point of use, this approach offered enhanced throughput in terms of eluent preparation time and labor, and with a more reproducible pH profile. The performance of the system was demonstrated by running pH gradients ranging from pH 8.2 to 10.9 on a polymer monolith cation-exchange column for high throughput profiling of charge heterogeneity of intact, basic therapeutic monoclonal antibodies. A high degree of flexibility in modulating the key parameters of the pH gradient, including the buffer concentration, the pH gradient slope and the operating pH range was demonstrated. This enabled fine-tuning of the separation conditions for each individual antibody in order to enhance the chromatographic resolution.

Characterization of polymer monoliths containing embedded nanoparticles by scanning transmission X-ray microscopy (STXM).

The structural and chemical homogeneity of monolithic columns is a key parameter for high efficiency stationary phases in liquid chromatography. Improved characterization techniques are needed to better understand the polymer morphology and its optimization. Here the analysis of polymer monoliths by scanning transmission X-ray microscopy (STXM) is presented for the first time. Poly(butyl methacrylate-co-ethyleneglycoldimethacrylate) [poly(BuMA-co-EDMA)] monoliths containing encapsulated divinylbenzene (DVB) nanoparticles were characterized by STXM, which gives a comprehensive, quantitative chemical analysis of the monolith at a spatial resolution of 30 nm. The results are compared with other methods commonly used for the characterization of polymer monoliths [scanning electron microscopy (SEM), transmission electron microscopy (TEM), mercury porosimetry, and nitrogen adsorption]. The technique permitted chemical identification and mapping of the nanoparticles within the polymeric scaffold. Residual surfactant, which was used during the manufacture of the nanoparticles, was also detected. We show that STXM can give more in-depth chemical information for these types of materials and therefore lead to a better understanding of the link between polymer morphology and chromatographic performance.

Epoxy-based monoliths for capillary liquid chromatography of small and large molecules.

A versatile epoxy-based monolith was synthesised by polycondensation polymerisation of glycidyl ether 100 with ethylenediamine using a porogenic system consisting of polyethylene glycol, M(w) = 1000, and 1-decanol. Polymerisation was performed at 80 °C for 22 h. A simple acid hydrolysis of residual epoxides resulted in a mixed diol-amino chemistry. The modified column was used successfully for hydrophilic interaction liquid chromatography (HILIC) of small molecule probes such as nucleic acid bases and nucleosides, benzoic acid derivatives, as well as for peptides released from a tryptic digest of cytochrome c. The mixed-mode chemistry allowed both hydrophilic partitioning and ion-exchange (IEX) interactions to contribute to the separation, providing flexibility in selectivity control. Residual epoxide groups were also exploited for incorporating a mixed IEX chemistry. Alternatively, the surface chemistry of the monolith pore surface rendered hydrophobic via grafting of a co-polymerised hydrophobic hydrogel. The inherent hydrophilicity of the monolith scaffold also enabled high performance separation of proteins under IEX and hydrophobic interaction modes and in the absence of non-specific interactions.

Poly(ethylene glycol)-based monolithic capillary columns for hydrophobic interaction chromatography of immunoglobulin G subclasses and variants.

Polymer monoliths were prepared in 150 µm id capillaries by thermally initiated polymerization of PEG diacrylate for rapid hydrophobic interaction chromatography of immunoglobulin G (IgG) subclasses and related variants. Using only one monomer in the polymerization mixture allowed ease of optimization and synthesis of the monolith. The performance of the monolith was demonstrated by baseline resolution of IgG subclasses and variants, including mixtures of the κ variants of IgG1, IgG2, and IgG3 as well as the κ and λ variants associated with IgG1 and IgG2. The effect of eluent concentration and pH on the separation efficiency of studied proteins was also explored, allowing almost baseline resolution to be achieved for mixtures of the κ variants of IgG1, IgG2, IgG3, and IgG4 but also for the κ and λ variants of IgG1 and IgG2. The results showed significant improvement in the separations in terms of the tradeoff between analysis time and resolution, while maintaining a simple methodology, in comparison to previous reports. The synthesized monolith was also used for the separation of isoforms of a therapeutic monoclonal antibody.