RESUMO
The possibility of using differential pre-heating prior to supramolecular gelation to control the balance between hydrogen-bonding and aromatic stacking interactions in supramolecular gels and obtain consequent systematic regulation of structure and properties is demonstrated. Using a model aromatic peptide amphiphile, Fmoc-tyrosyl-leucine (Fmoc-YL) and a combination of fluorescence, infrared, circular dichroism and NMR spectroscopy, it is shown that the balance of these interactions can be adjusted by temporary exposure to elevated temperatures in the range 313-365â K, followed by supramolecular locking in the gel state by cooling to room temperature. Distinct regimes can be identified regarding the balance between H-bonding and aromatic stacking interactions, with a transition point at 333â K. Consequently, gels can be obtained with customizable properties, including supramolecular chirality and gel stiffness. The differential supramolecular structures also result in changes in proteolytic stability, highlighting the possibility of obtaining a range of supramolecular architectures from a single molecular structure by simply controlling the pre-assembly temperature.
RESUMO
Two-component systems capable of self-assembling into soft gel-phase materials are of considerable interest due to their tunability and versatility. This paper investigates two-component gels based on a combination of a L-lysine-based dendron and a rigid diamine spacer (1,4-diaminobenzene or 1,4-diaminocyclohexane). The networked gelator was investigated using thermal measurements, circular dichroism, NMR spectroscopy and small angle neutron scattering (SANS) giving insight into the macroscopic properties, nanostructure and molecular-scale organisation. Surprisingly, all of these techniques confirmed that irrespective of the molar ratio of the components employed, the "solid-like" gel network always consisted of a 1:1 mixture of dendron/diamine. Additionally, the gel network was able to tolerate a significant excess of diamine in the "liquid-like" phase before being disrupted. In the light of this observation, we investigated the ability of the gel network structure to evolve from mixtures of different aromatic diamines present in excess. We found that these two-component gels assembled in a component-selective manner, with the dendron preferentially recognising 1,4-diaminobenzene (>70 %), when similar competitor diamines (1,2- and 1,3-diaminobenzene) are present. Furthermore, NMR relaxation measurements demonstrated that the gel based on 1,4-diaminobenzene was better able to form a selective ternary complex with pyrene than the gel based on 1,4-diaminocyclohexane, indicative of controlled and selective pi-pi interactions within a three-component assembly. As such, the results in this paper demonstrate how component selection processes in two-component gel systems can control hierarchical self-assembly.
Assuntos
Géis/química , Antracenos/química , Dicroísmo Circular , Misturas Complexas/química , Diaminas/química , Espectroscopia de Ressonância Magnética , Difração de Nêutrons , Espalhamento a Baixo Ângulo , Especificidade por Substrato , Temperatura de TransiçãoRESUMO
This paper highlights the key role played by solubility in influencing gelation and demonstrates that many facets of the gelation process depend on this vital parameter. In particular, we relate thermal stability ( T gel) and minimum gelation concentration (MGC) values of small-molecule gelation in terms of the solubility and cooperative self-assembly of gelator building blocks. By employing a van't Hoff analysis of solubility data, determined from simple NMR measurements, we are able to generate T calc values that reflect the calculated temperature for complete solubilization of the networked gelator. The concentration dependence of T calc allows the previously difficult to rationalize "plateau-region" thermal stability values to be elucidated in terms of gelator molecular design. This is demonstrated for a family of four gelators with lysine units attached to each end of an aliphatic diamine, with different peripheral groups (Z or Boc) in different locations on the periphery of the molecule. By tuning the peripheral protecting groups of the gelators, the solubility of the system is modified, which in turn controls the saturation point of the system and hence controls the concentration at which network formation takes place. We report that the critical concentration ( C crit) of gelator incorporated into the solid-phase sample-spanning network within the gel is invariant of gelator structural design. However, because some systems have higher solubilities, they are less effective gelators and require the application of higher total concentrations to achieve gelation, hence shedding light on the role of the MGC parameter in gelation. Furthermore, gelator structural design also modulates the level of cooperative self-assembly through solubility effects, as determined by applying a cooperative binding model to NMR data. Finally, the effect of gelator chemical design on the spatial organization of the networked gelator was probed by small-angle neutron and X-ray scattering (SANS/SAXS) on the native gel, and a tentative self-assembly model was proposed.
RESUMO
It is likely that nanofabrication will underpin many technologies in the 21st century. Synthetic chemistry is a powerful approach to generate molecular structures that are capable of assembling into functional nanoscale architectures. There has been intense interest in self-assembling low-molecular-weight gelators, which has led to a general understanding of gelation based on the self-assembly of molecular-scale building blocks in terms of non-covalent interactions and packing parameters. The gelator molecules generate hierarchical, supramolecular structures that are macroscopically expressed in gel formation. Molecular modification can therefore control nanoscale assembly, a process that ultimately endows specific material function. The combination of supramolecular chemistry, materials science, and biomedicine allows application-based materials to be developed. Regenerative medicine and tissue engineering using molecular gels as nanostructured scaffolds for the regrowth of nerve cells has been demonstrated in vivo, and the prospect of using self-assembled fibers as one-dimensional conductors in gel materials has captured much interest in the field of nanoelectronics.
Assuntos
Eletrônica , Nanoestruturas/química , Medicina Regenerativa/métodos , Animais , Materiais Biocompatíveis/química , Géis/química , Humanos , Nanoestruturas/ultraestruturaRESUMO
Mixtures of an appropriate carboxylic acid and n-butylstannoic acid constitute modular gelation systems, in which the formation of a well-defined 'tin-drum' nanocluster subsequently underpins the hierarchical assembly of nanostructured fibres, which form self-supporting gel-phase networks in organic solvents.
RESUMO
Dendritic molecules fall somewhere between small-molecule organic systems and polymers. Like polymers, they are constructed from a repeating motif, often have nanoscopic dimensions, and are capable of forming multiple non-covalent interactions. However, they are synthesized using organic chemistry methods and, unlike polymers, have well-defined, discrete structures which can be precisely controlled. This combination of properties makes dendritic molecules of particular interest for application in the assembly of gel-phase materials. In particular, this review focusses on the way in which molecular-scale information, put into place using organic synthesis, is transcribed up to the nanoscale, as visualised by electron microscopy techniques. Furthermore, it is illustrated that the molecular and nanoscale structures have a direct impact on the macroscopic materials properties of the gel-phase network. We discuss the structural effects on macroscopic gelation in terms of molecular size, shape and chirality, and clearly outline the specific advantages of using dendritic structures for this type of soft materials application.
RESUMO
This paper reports a dendritic system which is capable of forming both one-component and two-component gels--interestingly the addition of the second component can either increase or decrease the degree of gelation, depending on dendritic generation.
RESUMO
Enzyme responsive materials (ERMs) are a class of stimuli responsive materials with broad application potential in biological settings. This review highlights current and potential future design strategies for ERMs and provides an overview of the present state of the art in the area.
RESUMO
The structural characterization of subtilisin mesoscale clusters, which were previously shown to induce supramolecular order in biocatalytic self-assembly of Fmoc-dipeptides, was carried out by synchrotron small-angle X-ray, dynamic, and static light scattering measurements. Subtilisin molecules self-assemble to form supramolecular structures in phosphate buffer solutions. Structural arrangement of subtilisin clusters at 55 °C was found to vary systematically with increasing enzyme concentration. Static light scattering measurements showed the cluster structure to be consistent with a fractal-like arrangement, with fractal dimension varying from 1.8 to 2.6 with increasing concentration for low to moderate enzyme concentrations. This was followed by a structural transition around the enzyme concentration of 0.5 mg mL-1 to more compact structures with significantly slower relaxation dynamics, as evidenced by dynamic light scattering measurements. These concentration-dependent supramolecular enzyme clusters provide tunable templates for biocatalytic self-assembly.
RESUMO
Supramolecular gels, which demonstrate tunable functionalities, have attracted much interest in a range of areas, including healthcare, environmental protection and energy-related technologies. Preparing these materials in a reliable manner is challenging, with an increased level of kinetic defects observed at higher self-assembly rates. Here, by combining biocatalysis and molecular self-assembly, we have shown the ability to more quickly access higher-ordered structures. By simply increasing enzyme concentration, supramolecular order expressed at molecular, nano- and micro-levels is dramatically enhanced, and, importantly, the gelator concentrations remain identical. Amphiphile molecules were prepared by attaching an aromatic moiety to a dipeptide backbone capped with a methyl ester. Their self-assembly was induced by an enzyme that hydrolysed the ester. Different enzyme concentrations altered the catalytic activity and size of the enzyme clusters, affecting their mobility. This allowed structurally diverse materials that represent local minima in the free energy landscape to be accessed based on a single gelator structure.
Assuntos
Enzimas/metabolismo , Biocatálise , Dipeptídeos/química , Enzimas/química , Géis/química , Microscopia de Força Atômica , Subtilisina/química , Subtilisina/metabolismo , Temperatura , TermodinâmicaRESUMO
Aromatic short peptide derivatives, i.e. peptides modified with aromatic groups such as 9-fluorenylmethoxycarbonyl (Fmoc), can self-assemble into self-supporting hydrogels. These hydrogels have some similarities to extracellular matrices due to their high hydration, relative stiffness and nanofibrous architecture. We previously demonstrated that Fmoc-diphenylalanine (Fmoc-F(2)) provides a suitable matrix for two-dimensional (2D) or three-dimensional (3D) culture of primary bovine chondrocytes. In this paper we investigate whether the introduction of chemical functionality, such as NH(2), COOH or OH, enhances compatibility with different cell types. A series of hydrogel compositions consisting of combinations of Fmoc-F(2) and n-protected Fmoc amino acids, lysine (K, with side chain R=(CH(2))(4)NH(2)), glutamic acid (D, with side chain R=CH(2)COOH), and serine (S, with side chain R=CH(2)OH) were studied. All compositions produced fibrous scaffolds with fibre diameters in the range of 32-65 nm as assessed by cryo-scanning electron microscopy and atomic force microscopy. Fourier transform infrared spectroscopy analysis suggested that peptide segments adopt a predominantly antiparallel beta-sheet conformation. Oscillatory rheology results show that all four hydrogels have mechanical profiles of soft viscoelastic materials with elastic moduli dependent on the chemical composition, ranging from 502 Pa (Fmoc-F(2)/D) to 21.2 KPa (Fmoc-F(2)). All gels supported the viability of bovine chondrocytes as assessed by a live-dead staining assay. Fmoc-F(2)/S and Fmoc-F(2)/D hydrogels in addition supported viability for human dermal fibroblasts (HDF) while Fmoc-F(2)/S hydrogel was the only gel type that supported viability for all three cell types tested. Fmoc-F(2)/S was therefore investigated further by studying cell proliferation, cytoskeletal organization and histological analysis in 2D culture. In addition, the Fmoc-F(2)/S gel was shown to support retention of cell morphology in 3D culture of bovine chondrocytes. These results demonstrate that introduction of chemical functionality into Fmoc-peptide scaffolds may provide gels with tunable chemical and mechanical properties for in vitro cell culture.
Assuntos
Materiais Biocompatíveis/química , DNA/metabolismo , Técnicas de Transferência de Genes , Peptídeos/química , Células 3T3 , Animais , Bovinos , Adesão Celular , Proliferação de Células , Sobrevivência Celular , Células Cultivadas , Condrócitos , Citoesqueleto/metabolismo , DNA/genética , DNA/ultraestrutura , Derme/citologia , Módulo de Elasticidade , Elasticidade , Fibroblastos , Fluorenos/química , Ácido Glutâmico/química , Humanos , Hidrogéis/química , Ligação de Hidrogênio , Concentração de Íons de Hidrogênio , Lactato Desidrogenases/metabolismo , Lisina/química , Camundongos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Plasmídeos/genética , Estrutura Secundária de Proteína , Serina/química , Eletricidade Estática , Alicerces Teciduais , ViscosidadeRESUMO
This paper reports the use of a range of amino acids to construct diverse gelators, employing structures in which Boc-protected amino acids are attached to either end of an aliphatic diamine spacer chain. The choice of amino acid determines whether nanoscale self-assembly takes place and controls the properties of the resultant material, while the function of the amino acid (e.g., the optical properties of tryptophan) is translated into the self-assembled nanostructured gel.
Assuntos
Aminoácidos/química , Materiais Biomiméticos/química , Materiais Biomiméticos/síntese química , Dicroísmo Circular , Espectroscopia de Ressonância Magnética , Microscopia Eletrônica de Varredura , Estrutura Molecular , TemperaturaRESUMO
This paper investigates dendritic peptides capable of assembling into nanostructured gels, and explores the effect on self-assembly of mixing different molecular building blocks. Thermal measurements, small angle X-ray scattering (SAXS) and circular dichroism (CD) spectroscopy are used to probe these materials on macroscopic, nanoscopic and molecular length scales. The results from these investigations demonstrate that in this case, systems with different "size" and "chirality" factors can self-organise, whilst systems with different "shape" factors cannot. The "size" and "chirality" factors are directly connected with the molecular information programmed into the dendritic peptides, whilst the shape factor depends on the group linking these peptides together--this is consistent with molecular recognition hydrogen bond pathways between the peptidic building blocks controlling the ability of these systems to self-recognise. These results demonstrate that mixtures of relatively complex peptides, with only subtle differences on the molecular scale, can self-organise into nanoscale structures, an important step in the spontaneous assembly of ordered systems from complex mixtures.
Assuntos
Dendrímeros/química , Géis/química , Fragmentos de Peptídeos/química , Materiais Biocompatíveis , Dicroísmo Circular , Ligação de Hidrogênio , Conformação Molecular , Estrutura Molecular , Nanoestruturas , Nanotecnologia , TermodinâmicaRESUMO
In the past 10 years, the molecular self-assembly and network formation of small molecule gelators has become one of the most active frontiers of the emergent area of nanochemistry. Increasingly, research efforts have begun to focus on multicomponent gelators, which rely on the initial interaction of distinct individual components to form a complex that subsequently self-assembles into a fibrous supramolecular polymer. In true two-component systems, an individual component can be present in isotropic solution, and only on addition of the second component will a gel actually form. In some cases, however, two-component gels are reported in which the second component significantly modifies the behaviour of a known gelator. Both systems are discussed in this article. The additional level of supramolecular control in the hierarchical self-assembly of two-component gels confers exquisite tunability and controllability. Functionality can be readily built into the material by simple variation of one of the individual components. This article discusses the key approaches used to control self-assembly by manipulating single molecular-recognition events and illustrates how controlling the transcription of information from the molecular to the macroscopic level by the simple addition of a second component allows complex functional materials to be selectively assembled from simple building blocks.
RESUMO
This study investigates the self-assembly of simple aliphatic diamines with a dendritic peptide. By controlling the molar ratio of this two-component system, new nanoscale morphologies were generated. In the presence of relatively long aliphatic chains (C10, C12) a transition from nanoscale fibres to platelets was observed on changing the molar ratio, whereas, for shorter spacer chains (e.g., C9 and C8), interesting and unique morphological changes were observed by low voltage field emission gun scanning electron microscopy (SEM), with "nanosquares" or nanoscale "rosette" structures being formed. Remarkably, these discrete nanoscale structures were able to form sample-spanning networks capable of supporting a gel-phase material; whereas, most gels are usually based on fibrillar assemblies. In addition to SEM, the gels were characterised by using thermal measurements and circular dichroism spectroscopy. The length of the diamine spacer and the molar ratio of components controlled the self-assembly process by modifying the spatial organisation of the dendritic head groups at the molecular level, which is transcribed into the aspect ratio of the self-assembled state at the microscopic level. Ultimately, this led to diamine-induced control of the macroscopic material's behaviour. When present in excess, the diamine controlled the observed nanoscale morphology as a consequence of undergoing a dendritically controlled nanocrystallisation process to form a network, an unusual and significant result.
Assuntos
Antracenos/química , Diaminas/química , Nanoestruturas/química , Nanotecnologia/métodos , Antracenos/síntese química , Dicroísmo Circular , Diaminas/síntese química , Géis/síntese química , Géis/química , Ligação de Hidrogênio , Estrutura Molecular , Tamanho da PartículaRESUMO
This paper compares and contrasts, for the first time, one- and two-component gelation systems that are direct structural analogues and draws conclusions about the molecular recognition pathways that underpin fibrillar self-assembly. The new one-component systems comprise l-lysine-based dendritic headgroups covalently connected to an aliphatic diamine spacer chain via an amide bond. One-component gelators with different generations of headgroup (from first to third generation) and different length spacer chains are reported. The self-assembly of these dendrimers in toluene was elucidated using thermal measurements, circular dichroism (CD) and NMR spectroscopies, scanning electron microscopy (SEM), and small-angle X-ray scattering (SAXS). The observations are compared with previous results for the analogous two-component gelation system in which the dendritic headgroups are bound to the aliphatic spacer chain noncovalently via acid-amine interactions. The one-component system is inherently a more effective gelator, partly as a consequence of the additional covalent amide groups that provide a new hydrogen bonding molecular recognition pathway, whereas the two-component analogue relies solely on intermolecular hydrogen bond interactions between the chiral dendritic headgroups. Furthermore, because these amide groups are important in the assembly process for the one-component system, the chiral information preset in the dendritic headgroups is not always transcribed into the nanoscale assembly, whereas for the two-component system, fiber formation is always accompanied by chiral ordering because the molecular recognition pathway is completely dependent on hydrogen bond interactions between well-organized chiral dendritic headgroups.
RESUMO
The self-assembly of diaminododecane solubilised by different dendritic peptides, possessing increasing levels of dendritic branching, was investigated. The dendritic peptides were based on l-lysine building blocks and were of first, second and third generation, containing one, three and seven amino acid repeat units respectively. By applying these structures as potential gelator units, the dendritic effect on gelation was investigated. The degree of structuring was modulated, with the dendritic peptide controlling the aggregate morphology and the ability of the self-assembled state to manifest itself macroscopically as gelation. First generation gelator units (G1) did not induce macroscopic gelation with diaminododecane under any conditions, whilst those self-assemblies based on second (G2) and third (G3) generation branches did form gel-phase materials. Furthermore, gel-phase materials based on G2 exhibited optimum gelation behaviour compared to those based on G3(in terms of the thermal strength of the materials). Circular dichroism showed that the dendritic effect, programmed in at the molecular level, is directly related to the degree of chiral organisation within the self-assembled state. The dendritic generation of the peptide controls the pattern of amide-amide hydrogen bonding in terms of binding strength and alignment as determined using NMR methods. The mode of self-assembly can be qualitatively rationalised in terms of an attractive enthalpic interaction (i.e., amide-amide hydrogen bonding), a repulsive interaction (i.e., steric interactions between dendritic peptides) and an entropic term related to the hierarchical organisation of the gelator building blocks. It is argued that the balance between these factors determines the nature of the dendritic effect.
Assuntos
Géis/química , Peptídeos/química , Materiais Biocompatíveis , Dicroísmo Circular , Conformação de Ácido Nucleico , Temperatura , TermodinâmicaRESUMO
The self-assembly of diaminododecane with dendritic l-lysine-based peptides to form gel-phase materials was investigated in a range of different solvents. The degree of structuring was modulated by the solvent employed, an effect which induced subtle changes in the mesoscale aggregate morphology and macroscopic behavior of the self-assembled state. In this paper a range of different solvent parameters are investigated, and it is clearly shown that macroscopic gelation can be related to a solvent polar solubility parameter for this system. The results also show a dependence on Kamlet-Taft hydrogen bonding parameters, and this clearly demonstrates the role of the solvent environment in terms of dendron--dendron intermolecular hydrogen bonding and its impact on the supramolecular chiral organization of the assembled superstructure.
Assuntos
Dendrímeros/química , Diaminas/química , Lisina/química , Solventes/química , Dicroísmo Circular , Géis/química , Ligação de Hidrogênio , Lisina/síntese química , Microscopia Eletrônica de Varredura , Conformação Molecular , Tamanho da Partícula , Peptídeos/química , Sensibilidade e Especificidade , Solubilidade , TemperaturaRESUMO
The present study investigates in detail the physical gelation of toluene induced by the addition of simple aliphatic diamines to a dendritic L-lysine-based peptide. The gel-phase material obtained was characterized using differential scanning calorimetry, scanning electron microscopy, small-angle X-ray scattering, circular dichroism, 1H NMR, and X-ray diffraction. When the length of the aliphatic diamine is incrementally increased (C6-C12), the thermally reversible gel-sol transition temperature is dramatically increased (4-105 degrees C). This paper shows that the molecular information preset in the diamine is transcribed into the supramolecular assembly on the microscale and that this, in turn, controls the highly tunable macroscopic materials properties. The results also demonstrate the importance of chirality in the assembly process and highlight the role played by the aliphatic diamine in modulating the transcription of chirality from the molecular to the microscopic level.
RESUMO
The self-assembly of diaminododecane solubilised by four different stereoisomeric dendritic peptides to form gel-phase materials in toluene was investigated. The second generation dendritic peptides were based on D- and L-lysine building blocks, and each contained three chiral centres. By designing dendritic peptides in which the configurations of the chiral centres were modified, and applying them as gelator units, the assembly of stereoisomers could be investigated. In all cases, the self-assembly of gelator units resulted in macroscopic gelation. However, the degree of structuring was modulated by the stereoisomers employed, an effect which changed the morphology and macroscopic behavior of the self-assembled state. Enantiomeric (L,L,L or D,D,D) gelator units formed fibrous molecular assemblies, whilst the racemic gel (50 % L,L,L : 50 % D,D,D) formed a flat structure with a "woven" appearance. Gelator units based on L,D,D or D,L,L dendritic peptides also formed fibrous assemblies, but small-angle X-ray scattering indicated significant morphological differences were caused by the switch in chirality. Furthermore, the macroscopic stability of the gel was diminished when these peptides were compared with their L,L,L or D,D,D analogues. In this paper it is clearly shown that individual stereocentres, on the molecular level, are directly related to the helicity within the fibre. It is argued that the chirality controls the pattern of hydrogen bonding within the assembly, and hence determines the extent of fibre formation and the macroscopic gel strength.