Smartphone-assisted hydrogel platform based on BSA-CeO2 nanoclusters for dual-mode determination of acetylcholinesterase and organophosphorus pesticides.

A dual-mode sensor was developed for detecting acetylcholinesterase (AChE) and organophosphorus pesticides (OPs) via bifunctional BSA-CeO2 nanoclusters (NCs) with oxidase-mimetic activity and fluorescence property. The dual-mode sensor has the characteristics of self-calibration and self-verification, meeting the needs of different detection conditions and provide more accurate results. The colorimetric sensor and fluorescence sensor have been successfully used for detecting AChE with limit of detection (LOD) of 0.081 mU/mL and 0.056 mU/mL, respectively, while the LOD for OPs were 0.9 ng/mL and 0.78 ng/mL, respectively. The recovery of AChE was 93.9-107.2% and of OPs was 95.8-105.0% in actual samples. A novel strategy was developed to monitor pesticide residues and detect AChE level, which will motivate future work to explore the potential applications of multifunctional nanozymes.

A biosensor based on Fe3O4@MXene-Au nanocomposites with high peroxidase-like activity for colorimetric and smartphone-based detection of glucose.

A novel magnetic nanozyme Fe3O4@MXene-Au nanocomposite, which possessed higher peroxidase-like activity than that of Fe3O4 nanoparticles and Fe3O4@MXene nanocomposites, was developed. The outstanding magnetic properties of the nanozyme endowed it with the ability of simple and rapid separation, achieving great recyclability. Based on Fe3O4@MXene-Au nanocomposites and glucose oxidase (Glu Ox), a highly selective colorimetric biosensor for glucose detection was developed. Fe3O4@MXene-Au nanocomposites can catalyze H2O2 produced from glucose catalyzed by glucose oxidase to ·OH and oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB (oxTMB) with a significant absorbance at 652 nm. The linear range of glucose was 0-1.4 mM under optimal conditions, with a limit of detection (LOD) of 0.11 mM. Glucose in human whole blood was successfully detected with satisfactory recoveries. Furthermore, a facile agarose hydrogel detection platform was designed. With smartphone software, glucose detection can be realized by the agarose hydrogel platform, demonstrating the potential in on-site and visual detection of glucose.

Recyclable molecularly imprinted polymers based on Fe3O4@SiO2 and PAMAM dendrimers for the determination of myosmine in cigarettes.

A selective method for the determination of myosmine (a tobacco alkaloid) was developed using molecularly imprinted polymers (MIPs) based on Fe3O4@SiO2 and PAMAM dendrimers. Fe3O4@SiO2 with excellent magnetism and rapid separation performance was chosen as carrier for the MIPs. Moreover, the MIPs modified with PAMAM dendrimers exhibited a regular structure and abundant functional groups, which improve the efficiency of imprinting sites. The myosmine concentration was measured by HPLC with PDA detector, and the UV detection wavelength was set to 200 nm. The linear range of this assay was 13.2-400 mg/L with a correlation coefficient of 0.999, and the detection limit was 4.0 mg/L (S/N = 3). The MIPs have been used for the determination of myosmine in cigarettes, and the recovery range was 84.2-93.5%, with RSD values in the range 0.41-3.1%. In conclusion, our MIPs combine advantages of simple preparation and remarkable selectivity, which gives them excellent application prospects for the sensitive determination of trace myosmine in tobacco products.

Dual-Emission Reverse Change Ratio Photoluminescence Sensor Based on a Probe of Nitrogen-Doped Ti3C2 Quantum Dots@DAP to Detect H2O2 and Xanthine.

Titanium carbide quantum dots (Ti3C2 QDs) derived from two-dimensional (2D) Ti3C2Tx (MXene) are the rising-star material recently. Herein, nitrogen-doped Ti3C2 QDs (N-Ti3C2 QDs) were synthesized via a solvothermal method. The obtained N-Ti3C2 QDs exhibited excitation-dependent photoluminescence, antiphotobleaching, and dispersion stability. Furthermore, by combining the N-Ti3C2 QDs and DAP (2,3-diaminophenazine, the oxidative product of o-phenylenediamine) as a composite nanoprobe (N-Ti3C2 QDs@DAP), we developed a dual-emission reverse change ratiometric sensor to quantitatively monitor H2O2 based on photoinduced electron-transfer effects, where N-Ti3C2 QDs acted as the donor and DAP as the acceptor. On the basis of the xanthine converting into H2O2 through the catalysis of xanthine oxidase, the N-Ti3C2 QDs@DAP nanoprobe was also exploited for xanthine sensing. As a result, the proposed assay was demonstrated to be highly sensitive for H2O2 and xanthine with detection limits of 0.57 and 0.34 µM, respectively. In a word, we have investigated the application of N-Ti3C2 QDs in H2O2 and xanthine sensing and opened a new and exciting avenue for the N-Ti3C2 QDs in biosensing.

A label-free electrochemical magnetic aptasensor based on exonuclease III-assisted signal amplification for determination of carcinoembryonic antigen.

A novel label-free and exonuclease III (Exo III)-assisted signal amplification electrochemical aptasensor was constructed for the determination of carcinoembryonic antigen (CEA) via magnetic field-induced self-assembly of magnetic biocomposites (Fe3O4@Au NPs-S1-S2-S3). The magnetic biocomposites were acquired by modifying double-stranded DNA (S1-S2-S3) on the surface of Fe3O4@Au nanoparticles (Fe3O4@Au NPs). Among them, Fe3O4@Au NPs were used as carriers for magnetic separation, thiolated single-stranded DNA (S1) provided signal sequence, CEA aptamer (S2) worked as a recognition element, and complementary strand (S3) was used to form double strands. In the presence of CEA, S2 bonded with CEA competitively; the exposed S1 could not be cleaved since Exo III was inactive against ssDNA. The G-quadruplex/hemin complexes finally formed with the existence of K+, and the high electrochemical signal of G-quadruplex/hemin complexes was recorded by differential pulse voltammetry (DPV) at - 0.6 V. Conversely, in the absence of CEA, dsDNA was cleaved from the 3' blunt end by Exo III; the disappearance of G-rich sequence blocked the generation of the signal. This method exhibited good selectivity and sensitivity for the determination of CEA; the linear range was from 0.1 to 200 ng mL-1 and the limit of detection was 0.4 pg mL-1. Graphical abstract.

A label-free electrochemical biosensor based on magnetic biocomposites with DNAzyme and hybridization chain reaction dual signal amplification for the determination of Pb2.

A highly sensitive and selective electrochemical biosensor for Pb2+ with a dual-amplification strategy is proposed. The first amplification step was realized by the cycle of Pb2+ and 8-17 DNAzyme (S2), and the hybridization chain reaction (HCR) triggered by S1 further amplified the electrochemical signal. Fe3O4@Au NPs, as a multifunctional magnetic carrier, is not only manifested in the construction of a magnetically controlled electrochemical response interface, but also has significant contribution in the purifying system, reducing interference, increasing the specific surface area, and the DNA loading. The magnetic nanocomposites were characterized by TEM as spheres with particle size of around 39 nm. When there was no Pb2+, long double-strand DNA (dsDNA) is formed on the surface of Fe3O4@Au NPs by the S1-triggered HCR; in the presence of Pb2+, S2 is activated and S1 on the surface of magnetic biocomposites (Fe3O4@Au NPs-S1) is continuously cleaved with the cycle of Pb2+ and S2, leading to a significant decrease of methylene blue (MB) absorbed on dsDNA. Such reverse dual-signal amplification strategy effectively increased the current difference and improved the sensitivity of the proposed sensor. The electrochemical signal of MB was obtained by differential pulse voltammetry (DPV) with preconcentration, showing a linear response toward Pb2+ ranging from 50 pM to 1 µM with a detection limit of 15 pM. The proposed method has feasible applications in detecting other heavy metal ions based on other metal-dependent DNAzyme. Graphical Abstract.

A versatile fluorometric aptasensing scheme based on the use of a hybrid material composed of polypyrrole nanoparticles and DNA-silver nanoclusters: application to the determination of adenosine, thrombin, or interferon-gamma.

The authors describe a versatile aptasensing scheme based on the use of polypyrrole nanoparticles (PPyNPs) and DNA-silver nanoclusters (DNA-AgNCs) for multiple target detection. The DNA-AgNCs consist of two functional domains, viz. (a) a nucleation domain for attaching the metal core of the nanoclusters, and (b) a recognition domain which consists of a single-stranded aptamer. In the absence of analytes, the single-strand recognition domain will be absorbed onto the surface of the PPyNPs through π stacking and hydrophobic interactions. As a result, the red fluorescence of the DNA-AgNCs (with excitation/emission peaks at 535/625 nm) is quenched by the PPyNPs. On introducing the analytes, the DNA-AgNCs will bind them. This leads to the desorption of DNA-AgNCs and the recovery of the red fluorescence. Based on the above strategy, a versatile, sensitive and selective aptasensor was established for detection of adenosine, thrombin and interferon-gamma. The method was applied to the detection of the above targets in (spiked) serum samples and gave satisfactory results, with detection limit of 0.58 nM for IFN-γ, 0.39 nM for adenosine, and 2.2 nM for thrombin. The use of PPyNPs results in uniquely low non-specific absorption and in improved analytical results in case of real-sample analysis when compared to previously reported methods. Graphical abstract Schematic illustration of DNA-silver nanoclusters and polypyrrole nanoparticles in an aptasensor for detection of multiple targets.

Sensitive and Label-Free Fluorescent Detection of Transcription Factors Based on DNA-Ag Nanoclusters Molecular Beacons and Exonuclease III-Assisted Signal Amplification.

Transcription factors (TFs) regulate gene expression by binding to regulatory regions, and their dysregulation is involved in numerous diseases. Thus, they are therapeutic targets and potential diagnostic markers. However, widely used methods for TFs detection are either cumbersome or costly. Herein, we first applied DNA-Ag nanoclusters molecular beacons (AgMBs) in TFs analysis and designed an assay based on the switchable fluorescence of AgMBs. In the absence of TFs, a single-stranded DNA functioned as a reporter is released from a double-stranded DNA probe (referred as dsTFs probe) under exonuclease III (Exo III) digestion. Then, the reporter triggers downstream Exo III-assisted signal amplification by continuously consuming the guanine-rich enhancer sequences in AgMBs, resulting in significant fluorescent decrease eventually. Conversely, the presence of TFs protects the dsTFs probe from digestion and blocks the downstream reaction to keep a highly fluorescent state. To testify this rationale, we utilized nuclear factor-kappa B p50 (NF-κB p50) as a model TFs. Owing to the amplification strategy, this method exhibited high sensitivity toward NF-κB p50 with a limit of detection of 10 pM, and a broad linear range from 30 pM to 1.5 nM. Furthermore, this method could detect multiple TFs in human colon cancer DLD-1 cells and reflect the variation in their cellular levels after stimulation. Finally, by conducting an inhibition assay we revealed the potential of this method for screening TFs-targeted drugs and calculating the IC50 of corresponding inhibitors.

Molecularly imprinted polymers based on SBA-15 for selective solid-phase extraction of baicalein from plasma samples.

Highly selective molecularly imprinted mesoporous silica polymer (SBA-15@MIP) for baicalein (BAI) extraction was synthesized using a surface molecular imprinting technique on the SBA-15 supporter. Computational simulation was used to predict the optimal functional monomer for the rational design of SBA-15@MIP. Meanwhile, high adsorption capacity was obtained when a suitable yield of molecularly imprinted polymers (MIPs) layer was grafted onto the surface of SBA-15. Characterization and performance tests of the obtained polymer revealed that SBA-15@MIP possessed a highly ordered mesoporous structure, reached saturated adsorption within 60 min, and exhibited higher sorption capacity to the target molecule BAI compared with non-imprinted mesoporous silica polymer (SBA-15@NIP) and SBA-15. Finally, SBA-15@MIP was successfully applied to solid-phase extraction (SPE) coupled with high-performance liquid chromatography and ultraviolet detection (HPLC-UV) for the determination of trace BAI in plasma samples. Mean recoveries of BAI through the molecularly imprinted solid-phase extraction (MISPE) sorbent, non-imprinted solid-phase extraction (NISPE) sorbent, and SBA-15 solid-phase extraction (SBA-15-SPE) sorbent were 94.4, 22.7, and 10.7 %, respectively, and the relative standard deviations were 2.9, 2.6, and 3.6 %, respectively. These results reveal that SBA-15@MIP as a SPE sorbent has good applicability to selectively separate and enrich trace BAI from complex samples.

Selective separation and determination of the synthetic colorants in beverages by magnetic solid-phase dispersion extraction based on a Fe3 O4 /reduced graphene oxide nanocomposite followed by high-performance liquid chromatography with diode array detection.

A facile adsorbent, a nanocomposite of Fe3 O4 and reduced graphene oxide, was fabricated for the selective separation and enrichment of synthetic aromatic azo colorants by magnetic solid-phase dispersion extraction. The nanocomposite was synthesized in a one-step reduction reaction and characterized by atomic force microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction and Brunauer-Emmett-Teller analysis. The colorants in beverages were quickly adsorbed onto the surface of the nanocomposite with strong π-π interactions between colorants and reduced graphene oxide, and separated with the assistance of an external magnetic field. Moreover, the four colorants in beverages were detected at different wavelengths by high performance liquid chromatography with diode array detection. A linear dependence of peak area was obtained over 0.05-10 µg/mL with the limits of detection of 10.02, 11.90, 10.41, 15.91 ng/mL for tartrazine, allure red, amaranth, and new coccine, respectively (signal to noise = 3). The recoveries for the spiked colorants were in the range of 88.95-95.89% with the relative standard deviation less than 2.66%. The results indicated that the nanocomposite of Fe3 O4 and reduced graphene oxide could be used as an excellent selective adsorbent for aromatic compounds and has potential applications in sample pretreatment.

Hydroxyl radical-mediated synthesis of carbonyl functionalized graphene quantum dots-like as enzyme mimics with tunable fluorescence emission.

The synthesis of graphene quantum dots-like enriched with specific oxygenated groups (o-GQDs) exhibiting great catalytic performance offers a promising tool for diagnosis and biomedicine, but introducing specific oxygen groups remains a challenge. Here, we propose a mild synthetic protocol for producing regulated fluorescence emission (from blue to yellow) carbonyl functionalized GQDs with double catalytic function through Fe3O4-catalyzed hydroxyl radical (·OH) oxidation the precursors like graphene oxide, polyaniline (PANI) and polydopamine (PDA). The method can be carried out at room temperature than the traditional high-temperature oxidation in concentrated acid. Interestingly, o-GQDs exhibit excellent peroxidase (POD)- and ascorbate oxidase-like activity. XPS characterization showed a significant increase in carbonyl content in o-GQDs compared to the precursor, even a 14-fold increase in blue-emitting iron-doped GQDs (b-Fe-GQDs). The introduction of Fe3O4 during the synthesis process results in a minor degree of Fe doping, which enhances the catalytic activity of b-Fe-GQDs through coordination with N. Based on this feature, highly sensitive single-signal and ultra-selective dual-signal methods for alkaline phosphatase detection were developed. This low cost and safe synthesis strategy paves the way for practical usage of o-GQDs.

Oxygen-functionalized Fe3O4@o-polypyrrole acting as high-efficiency oxidase mimics and their application in glutathione colorimetric sensing.

The enzyme-like properties of nanozymes may be considerably affected by the structure and surface groups, which thus need to be optimized. Here, through a simple NaOH chemical corrosion method, the chemical structure similar to N-Methylpyrrolidone (NMP), which possessed intrinsic oxidase-like activity, was introduced into polypyrrole (PPy), and then this nanomaterial became oxygen-functionalized PPy (o-PPy) with excellent oxidase-like activity from PPy without this property. Furthermore, after compounding magnetic Fe3O4, the obtained nanocomposites Fe3O4@o-PPy nanoparticles (Fe3O4@o-PPy NPs) showed superiorities in separation during synthesis and real-time control of enzyme catalysis. Studies have found that the enzymatic activity of Fe3O4@o-PPy NPs depended on the amount of functionalized oxygen and the conjugation extent of o-PPy. Fe3O4@o-PPy NPs had efficient oxidase-like activity under a wide range of pH and temperature. Based on the oxidase-like activity of Fe3O4@o-PPy NPs, a colorimetric sensor for glutathione (GSH), which presented rich color changes and satisfactory colorimetric resolution by adding the amaranth, was realized. We believe that the functional modification and structural regulation of PPy can not only realize its wider application but also promote the discovery of novel and efficient nanozymes.

Selective separation and enrichment of glibenclamide in health foods using surface molecularly imprinted polymers prepared via dendritic grafting of magnetic nanoparticles.

In this paper, the novel surface molecularly imprinted polymers based on dendritic-grafting magnetic nanoparticles were developed to enrich and separate glibenclamide in health foods. The density functional theory method was used to give theoretical directions to the synthesis of molecularly imprinted polymers. The polymers were prepared by using magnetic nanoparticles as supporting materials, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker. The characteristics of magnetic nanoparticles and polymers were measured by transmission electron microscope and SEM, respectively. The enriching ability of molecularly imprinted polymers was measured by Freundlich Isotherm. The molecularly imprinted polymers were used as dispersive SPE materials to enrich, separate, and detect glibenclamide in health foods by HPLC. The average recoveries of glibenclamide in spiked health foods were 81.46-93.53% with the RSD < 4.07%.

A molecularly imprinted ratiometric fluorescence sensor based on blue/red carbon quantum dots for the visual determination of thiamethoxam.

Neonicotinoids such as thiamethoxam (TMX) were widely used in agricultural production and tended to accumulate in the environment, potentially harming human and ecosystem health. To enable widespread monitoring of TMX residues, it was essential to design a reliable and sensitive detection method. Here, we developed a novel smartphone-enablled molecularly imprinted ratiometric fluorescence sensing system for selective on-site detection of TMX. It was based on blue-emission carbon dots (CDs) wrapped with a molecularly imprinted layer (B-CDs@MIPs), which provided the response signal, while red-emission CDs (R-CDs) served as an internal reference. The fluorescence signal ratio of the sensor increased with the TMX concentration, resulting in an obvious fluorescence color change from red to blue. The sensor exhibited a satisfactory limit of detection (LOD) of 13.5 nM in fluorescence analysis while LOD of 70.1 nM in visual determination. In addition, the sensing system was validated using food and environment samples, exhibiting recoveries from 91.40% to 105.7%, indicating excellent reliability for TMX detection in actual samples. Thus, the sensing system developed in this study offered promising prospects for visual detection of pesticide residues in complex environmental samples.

Magnetic dummy template molecularly imprinted particles functionalized with dendritic nanoclusters for selective enrichment and determination of 4-methylnitrosamino-1-(3-pyridyl)-1-butanone (NNK) in tobacco products.

The compound 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), one of the tobacco specific nitrosamines (TSNAs), is widely recognized as a major carcinogen found in tobacco products, environmental tobacco smoke and wastewater. Thus, a selective enrichment and sensitive detection method for monitoring the risk of NNK exposure is highly desirable. In this study, a magnetic molecularly imprinted polymer (MMIP) functionalized with dendritic nanoclusters was synthesized to selectively recognize NNK via the dummy template imprinting strategy, aiming to avoid residual template leakage and increase the imprinting efficiency. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, as well as vibrating sample magnetometry (VSM) and nitrogen adsorption/desorption analysis. The resulting MMIPs exhibited high adsorption capacity, fast binding kinetics and good selectivity for trace amounts of NNK. A rapid, low cost and efficient method for detecting NNK in tobacco products was established using magnetic dispersive solid-phase extraction coupled with HPLC-DAD with a good linear range of 0.1-250 µg mL-1. The limit of detection (LOD) and limit of quantification (LOQ) of NNK were 13.5 and 25.0 ng mL-1, respectively. The average recoveries were 87.8-97.3% with RSDs lower than 3%. The results confirmed that the MMIPs could be used as an excellent selective adsorbent for NNK, with potential applications in the pretreatment of tobacco products.

Molecular imprinting-based micro-stir bar sorptive extraction for specific analysis of Glibenclamide in herbal dietary supplements.

A novel molecularly imprinted polymers (MIPs) coated micro-stir bar (MSB) for Glibenclamide (GM) was developed. The MIPs, with GM as template molecular and methacrylic acid as functional monomer, were synthesized at the surface of the silylated MSB that was filled with magnetic core as substrate. Computational simulation was used for the optimal selection of functional monomers and porogen. The thickness of MIPs coating for MSB was about 10 µm, the adsorption and desorption time were about 40 and 20 min, respectively. The MIPs coated MSB possessed mechanical stability, high adsorption capacity, and good selectivity for GM. To achieve the optimum extraction performance, several parameters including extraction and desorption time, stirring rate, extraction and desorption solvent were investigated. A method for the determination of GM in herbal dietary supplements by MIPs coated MSB coupled with HPLC-UV was established. The results exhibited good linear ranges of 10-6250 µg L(-1) with the low limit of detection of GM (3.05 µg L(-1)) and the good recoveries (81.9-101.4%).

Qualitative and quantitative evaluation of phenolic compounds in Iris dichotoma Pall.

INTRODUCTION: The rhizome of Iris dichotoma Pall., a traditional Chinese herbal medicine that contains (iso) flavonoids as the main bioactive compound, has been used to treat several disorders such as inflammation, throat disorders, asthma and coughs. However, there is a lack of suitable methods for its qualitative and quantitative analysis as well as quality control. OBJECTIVES: To establish an HPLC method for the simultaneous determination of phenolic constituents, the identification of characteristic metabolites in the rhizomes of I. dichotoma and to compare their contents in samples from different areas of China. METHODOLOGY: HPLC coupled with diode-array detection (DAD) and electrospray ionisation multistage mass spectrometry (ESI-MS(n) ), and principal component analysis (PCA) were used for the qualitative and quantitative analysis of phenolic compounds in I. dichotoma samples. RESULTS: Twenty characteristic compounds were identified or tentatively characterised. A quantitative HPLC-UV method allowing the simultaneous quantification of 10 phenolic compounds was optimised and validated in terms of linearity, precision, accuracy, and limits of detection and quantification. CONCLUSION: The methodology developed proved to be effective for the identification and quantification of phenolic compounds in the rhizomes of I. dichotoma. Samples were classified into three groups according to their geographical origin based on their phenolic composition using principal component analysis.

A biosensor based on the biomimetic oxidase Fe3O4@MnO2 for colorimetric determination of uric acid.

High plasma urate is closely related to gout, cardiovascular and other diseases. Therefore, monitoring the content of uric acid (UA) in plasma is of great significance for the treatment of gout and the prevention of other related diseases. Herein, a biosensor based on the biomimetic oxidase Fe3O4 nanoparticles (NPs) @MnO2 nanosheets (Fe3O4@MnO2 NS) was constructed for colorimetric determination of UA. MnO2 NS is an efficient biomimetic oxidase, and we found that the intrinsic oxidase activity of MnO2 NS doped with Fe3O4 NPs can be significantly enhanced. The chromogenic substrate TMB can be catalyzed by Fe3O4 @MnO2 NS to generate blue oxidized TMB, and UA can decompose the MnO2 NS to inhibit the color reaction of TMB selectively, thereby realizing the quantitative detection of UA. In addition, the UA biosensor can perform colorimetric analysis of UA level through three methods: naked eye, smartphone and ultraviolet-visible (UV-vis) spectrophotometer. The linear ranges of UV-vis spectrophotometry and colorimetry with smartphone were 1-70 µM and 200-650 µM, respectively, and the limits of detection (LOD) were 0.27 µM and 21 µM. The analysis results of human plasma samples showed that the method had good selectivity and practicability.

An "on-off" ratio photoluminescence sensor based on catalytically induced PET effect by Fe3O4 NPs for the determination of coumarin.

Herein, using Fe3O4 nanoparticles (Fe3O4 NPs) as a magnetic artificial peroxidase, an "on-off" ratiometric photoluminescence sensor with high-sensitivity and high-selectivity for coumarin was constructed based on photoinduced electron transfer (PET) between 7-hydroxycoumarin and rhodamine B (RB). The results showed that Fe3O4 NPs catalyzed H2O2 to generate nucleophilic group ·OH, which attacked the active site of coumarin and produced strong fluorescent 7-hydroxycoumarin molecules. Then, the fluorescence of RB was quenched with 7-hydroxycoumarin through the PET effect. The ratio signal generated in the above process was used for the quantitative detection of coumarin. Under optimized conditions, the linear range 0.5-25 mg/L was acquired for coumarin with the detection limit of 0.016 mg/L. This method had excellent selectivity and the recovery rate was 81.8%-106.8% with the relative standard deviation less than 5.6%, so it can be used for the quantitative analysis of coumarin in complex matrix samples.

Chemical variations of the essential oils in flower heads of Chrysanthemum indicum L. from China.

The volatile compositions of hydrodistilled essential oils in the flower heads of Chrysanthemum indicum L. from eight populations in China were analyzed by GC/MS. A total of 169 compounds representing 88.79-99.53% of the oils were identified, and some remarkable differences were found in the constituent percentages of the eight populations. The predominant components of the essential oils were 1,8-cineole (0.62-7.34%), (+)-(1R,4R)-camphor (0.17-27.56%), caryophyllene oxide (0.54-5.8%), ß-phellandrene (0.72-1.87%), (-)-(1S,2R,4S)-borneol acetate (0.33-8.46%), 2-methyl-6-(p-tolyl)hept-2-ene (0.3-8.6%), 4,6,6-trimethylbicyclo[3.1.1]hept-3-en-2-yl acetate (0.17-26.48%), and hexadecanoic acid (0.72-15.97%). The chemotaxonomic value of the essential-oil compositions was discussed according to the results of cluster analysis (CA) and principal-component analysis (PCA). The eight populations were divided into five groups as different chemotypes (Groups A-E), and the scores together with the loadings revealed clearly different chemical properties of each population. In conclusion, GC/MS in combination with chemometric techniques provided a flexible and reliable method for characterizing the essential oils of different populations of C. indicum L.