AtLa1 protein initiates IRES-dependent translation of WUSCHEL mRNA and regulates the stem cell homeostasis of Arabidopsis in response to environmental hazards.

Plant stem cells are hypersensitive to environmental hazards throughout their life cycle, but the mechanism by which plants safeguard stem cell homeostasis in response to environmental hazards is largely unknown. The homeodomain transcription factor WUSCHEL (WUS) protein maintains the stem cell pool in the shoot apical meristem of Arabidopsis. Here, we demonstrate that the translation of WUS mRNA is directed by an internal ribosomal entry site (IRES) located in the 5'-untranslated region. The AtLa1 protein, an RNA-binding factor, binds to the 5'-untranslated region and initiates the IRES-dependent translation of WUS mRNA. Knockdown of AtLa1 expression represses the WUS IRES-dependent translation and leads to the arrest of growth and development. The AtLa1 protein is mainly located in the nucleoplasm. However, environmental hazards promote the nuclear-to-cytoplasmic translocation of the AtLa1 protein, which further enhances the IRES-dependent translation of WUS mRNA. Genetic evidence indicates that the WUS protein increases the tolerance of the shoot apical meristem to environmental hazards. Based on these results, we conclude that the stem cell niche in Arabidopsis copes with environmental hazards by enhancing the IRES-dependent translation of WUS mRNA under the control of the AtLa1 protein.

Acceleration effect of reduced graphene oxide on photoinduced synthesis of silver nanoparticles.

The photoinduced growth reaction of silver nanoparticles was accelerated by reduced graphene oxide (RGO) produced from graphene oxide (GO) during the light irradiation process in aqueous solution. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy demonstrated that RGO was generated in the photoinduced process. The acceleration effect of RGO was investigated through monitoring the extinction spectra of silver nanoparticles during the synthesis process. Moreover, transmission electron microscopy (TEM) was employed to characterize the evolution of morphologies of silver nanoparticles at different irradiation times to demonstrate the effect of RGO. The results indicate that RGO accelerates the photoinduced synthesis of silver nanoparticles. It is proposed that the acceleration effect of RGO on the photoinduced reaction is attributed to the particular property of high electronic conductivity.

Interfacing colloidal graphene oxide sheets with gold nanoparticles.

Aqueous solutions of graphene oxide (GO) and citrate-stabilised gold nanoparticles (AuNPs) are two classic, negatively charged colloids. Using the surface plasmon resonance spectra of AuNPs as a probe, we illustrate how the two like-charged colloids interact with each other and in so doing, reveal the unique solution behaviour of GO. We demonstrate that the electrical double layer of the GO sheets in water plays a key role in controlling the interaction between GO and AuNPs, which displays a one-way gate effect. It is shown that GO can capture and disperse AuNPs in water in a controllable fashion, without the need for additional chemical linkers. This discovery allows the successful synthesis of uncapped, yet solution-dispersible metal-nanoparticle assemblies. Such metal nanostructures have long been pursued for nano-plasmonics and sensing applications, but have remained difficult to prepare using conventional polymer dispersants. This work also makes clear that the combination of the two-dimensional conformation of GO along with its large molecular size and self-contained functional groups allows it to act as a unique soluble nanocarrier/substrate (the thinnest, functionalised flat substrate possible in nature) for the synthesis of new, soluble functional materials.

The AtMC4 regulates the stem cell homeostasis in Arabidopsis by catalyzing the cleavage of AtLa1 protein in response to environmental hazards.

The AtLa1 protein is an RNA binding factor that initiates the translation of WUSCHEL (WUS) mRNA in Arabidopsis. The AtLa1 protein can regulate the stem cell homeostasis via the nuclear-to-cytoplasmic translocation in response to environmental hazards. However, the translocation mechanism of AtLa1 protein remains to be elucidated. In the present study, we have explored the role of AtMC4 protein in the subcellular translocation of AtLa1 protein. Our results showed that the AtLa1 protein is a substrate of AtMC4 protein. The AtMC4 protein can interact with AtLa1 protein and catalyze the cleavage of the C-terminal nuclear localization signal peptide of AtLa1 protein. The AtMC4 protein is mainly distributed in the cytoplasm. In the presence of environmental stresses, the cytoplasmic-to-nuclear translocation of AtMC4 protein is enhanced with the result that more AtLa1 protein can be cleaved and transported from nucleus to cytoplasm, where AtLa1 protein further initiates the translation of WUS mRNA. By contrast, knockdown of AtMC4 expression inhibits the nuclear-to-cytoplasmic translocation of AtLa1 protein and the WUS protein translation. Based on these results, we conclude that the AtMC4 protein regulates stem cell homeostasis by catalyzing the cleavage of AtLa1 protein in response to environmental hazards.

Surfactant encapsulated DNA: structure characterization and interaction with dye molecules in organic media.

The recognition of electrostatically-bound DNA-didodecyldimethylammonium (DNA-DDDA) complex by three dye molecules, acridine orange (AO), ethidium bromide (EB) and 5,10,15,20-tetrakis(4-N-methylpyridyl) porphyrin tetra(p-toluenesulfonate) (TMPyP) in organic media was investigated through 1H NMR, UV-vis, and circular dichroism (CD) spectroscopies. When the organic solvent in which DNA-DDDA complex dissolves is changed from ethanol to chloroform, the adsorbed AO undergoes a reversible transformation from a monomer to a highly aggregated state at the interface between DNA and DDDA. EB also adsorbs at the interface between DNA and DDDA when EB interacts with the DNA-DDDA complex in organic media, but its existing state is independent of the used solvents. The third dye, TMPyP cation can intercalate into the G-C region while its anionic p-tosylate counterion remains unbound when it mixes with DNA complex in organic media. The complexes of DDDA with previously recognized DNA by the three dye molecules (DNA-dye), respectively, are also investigated. AO seems having changed its location from the grooves of DNA to the interface between DNA and DDDA after DNA-AO complex was electrostatically encapsulated with DDDA. The aggregation behavior of AO also shows a dependence on the polarity of the organic solvent. EB molecules are believed to intercalate into the base pairs of DNA in aqueous solution. The intercalation mode is still maintained after the encapsulation for DNA-EB in organic solvents, which is different from the situation between DNA-DDDA complex and EB. But in both cases, the existing states of EB are independent of the polarity of the organic solvents. Finally, TMPyP in the complex of DNA-TMPyP and DDDA is also judged to intercalate into the G-C region of DNA while its anionic p-tosylate counterion remains separated from DNA complex, which is similar to its interaction with DNA-DDDA complex in organic media. These data also strongly suggest that the intercalation state of TMPyP is more stable than its adsorption state in grooves when it is recognized with DNA. The present results are significant for the designs of both laser dye and conductive materials.

A Novel Method of Automatic Plant Species Identification Using Sparse Representation of Leaf Tooth Features.

Automatic species identification has many advantages over traditional species identification. Currently, most plant automatic identification methods focus on the features of leaf shape, venation and texture, which are promising for the identification of some plant species. However, leaf tooth, a feature commonly used in traditional species identification, is ignored. In this paper, a novel automatic species identification method using sparse representation of leaf tooth features is proposed. In this method, image corners are detected first, and the abnormal image corner is removed by the PauTa criteria. Next, the top and bottom leaf tooth edges are discriminated to effectively correspond to the extracted image corners; then, four leaf tooth features (Leaf-num, Leaf-rate, Leaf-sharpness and Leaf-obliqueness) are extracted and concatenated into a feature vector. Finally, a sparse representation-based classifier is used to identify a plant species sample. Tests on a real-world leaf image dataset show that our proposed method is feasible for species identification.

Fabrication of a covalently attached self-assembly multilayer film based on CdTe nanoparticles.

A precursor film has been fabricated from TGA (thiolglycolic acid)-stabilized CdTe nanoparticles and NDR (nitro-containing diazoresin) using electrostatic interactions and the standard layer-by-layer assembly method; covalent bonds are formed under ultraviolet irradiation. XPS provided evidence for the presence of CdTe nanoparticles within the polymer ultrathin films. UV-visible spectroscopy and FTIR spectroscopy provide evidence for the formation of a covalent linkage. Moreover, the UV-visible spectroscopy and AFM measurement support the improvement of the stability of the hybrid organic/inorganic film toward polar solvents when the linkages between the nanoparticles and polymer changed from ionic bonds to covalent bonds.

Investigation on solvent casting films of surfactant-encapsulated clusters.

The surfactant-encapsulated cluster (SEC) composed of a hydrophobic dimethyl dioctadecyl ammonium (DODA) shell and an encapsulated hydrophilic polyoxoanion core can form casting films. The structure of the casting film is influenced by evaporation rates of organic solvent. When the casting films are prepared by slow evaporation of chloroform, the alkyl chains are considered to possess a partial interdigitation, and the interdigitated length is 1.6 nm. The casting film structure is characterized by scanning force microscopy (SFM), Fourier transformation infrared (FT-IR), wide-angle X-ray diffraction, and differential scanning calorimetry (DSC).

Graphene oxide nanoparticles for enhanced photothermal cancer cell therapy under the irradiation of a femtosecond laser beam.

Nano-sized graphene and graphene oxide (GO) are promising for biomedical applications, such as drug delivery and photothermal therapy of cancer. It is observed in this work that the ultrafast reduction of GO nanoparticles (GONs) with a femtosecond laser beam creates extensive microbubbling. To understand the surface chemistry of GONs on the microbubble formation, the GONs were reduced to remove most of the oxygen-containing groups to get reduced GONs (rGONs). Microbubbling was not observed when the rGONs were irradiated by the laser. The instant collapse of the microbubbles may produce microcavitation effect that brings about localized mechanical damage. To understand the potential applications of this phenomenon, cancer cells labeled with GONs or rGONs were irradiated with the laser. Interestingly, the microbubbling effect greatly facilitated the destruction of cancer cells. When microbubbles were produced, the effective laser power was reduced to less than half of what is needed when microbubbling is absent. This finding will contribute to the safe application of femtosecond laser in the medical area by taking advantage of the ultrafast reduction of GONs. It may also find other important applications that need highly localized microcavitation effects.

Shape evolution of silver nanoplates through heating and photoinduction.

Shape conversions of silver nanoplates were realized by heating and subsequent light irradiation. The initial silver nanoprisms were transformed into silver nanodisks gradually in the process of heating, which was possibly achieved through dissolving and readsorption of silver atoms on the surface of silver nanoplates. Subsequently, under light irradiation, the heating induced silver nanodisks were reversed to silver nanoprisms in the same solution. The dissolved oxygen was found to play a pivotal role in the shape conversion from nanoprism to nanodisk. In addition to heating, deionized water could induce the shape conversion of silver nanoplates when it was added to precipitate of the initial silver nanoprisms after centrifugation. Citrate in solution is essential to the photoinduced shape conversion process. Transmission electron microscopy (TEM) and extinction spectroscopy results demonstrated that localized surface plasmon resonance (LSPR) properties of silver nanoplates were effectively tuned through shape conversion.

Surface grafting of electrospun fibers using ATRP and RAFT for the control of biointerfacial interactions.

BACKGROUND: The ability to present signalling molecules within a low fouling 3D environment that mimics the extracellular matrix is an important goal for a range of biomedical applications, both in vitro and in vivo. Cell responses can be triggered by non-specific protein interactions occurring on the surface of a biomaterial, which is an undesirable process when studying specific receptor-ligand interactions. It is therefore useful to present specific ligands of interest to cell surface receptors in a 3D environment that minimizes non-specific interactions with biomolecules, such as proteins. METHOD: In this study, surface-initiated atom transfer radical polymerization (SI-ATRP) of poly(ethylene glycol)-based monomers was carried out from the surface of electrospun fibers composed of a styrene/vinylbenzyl chloride copolymer. Surface initiated radical addition-fragmentation chain transfer (SI-RAFT) polymerisation was also carried out to generate bottle brush copolymer coatings consisting of poly(acrylic acid) and poly(acrylamide). These were grown from surface trithiocarbonate groups generated from the chloromethyl styrene moieties existing in the original synthesised polymer. XPS was used to characterise the surface composition of the fibers after grafting and after coupling with fluorine functional XPS labels. RESULTS: Bottle brush type coatings were able to be produced by ATRP which consisted of poly(ethylene glycol) methacrylate and a terminal alkyne-functionalised monomer. The ATRP coatings showed reduced non-specific protein adsorption, as a result of effective PEG incorporation and pendant alkynes groups existing as part of the brushes allowed for further conjugation of via azide-alkyne Huisgen 1,3-dipolar cycloaddition. In the case of RAFT, carboxylic acid moieties were effectively coupled to an amine label via amide bond formation. In each case XPS analysis demonstrated that covalent immobilisation had effectively taken place. CONCLUSION: Overall, the studies presented an effective platform for the preparation of 3D scaffolds which contain effective conjugation sites for attachment of specific bioactive signals of interest, as well as actively reducing non-specific protein interactions.

Reduced graphene oxide/ZnO composite: reusable adsorbent for pollutant management.

Reduced graphene oxide (RGO) coated with ZnO nanoparticles (NPs) was synthesized by a self-assembly and in situ photoreduction method, and then their application for removing organic pollutant from water was investigated. The RGO@ZnO composite nanomaterial has unique structural features including well-dispersed NPs on the surface and dense NPs loading. This composite exhibited a greatly improved Rhodamine B (RhB) adsorption capacity and an improved photocatalytic activity for degrading RhB compared to neat ZnO NPs. These properties made RGO@ZnO reusable for pollutant adsorbent. The composite showed an excellent cycling performance for organic pollutant removal up to 99% recovery over several cycles via simulated sunlight irradiation.

Hydrogen-bonded 1,2-bis(4-pyridyl)ethylene and maleic acid.

The title compound (systematic name: 4,4'-ethylenedipyridinium dimaleate), C(12)H(12)N(2)(2+).2C(4)H(3)O(4)(-), is a 1:2 adduct of 1,2-bis(4-pyridyl)ethylene (BPE) and maleic acid (MA). The interaction between the two components in the molecular complex is due to intermolecular hydrogen bonding via an N(+)-H.O(-) hydrogen bond.