An improved design to capture magnetic microparticles for capillary electrophoresis based immobilized microenzyme reactors.

In this paper, we demonstrate the effectiveness of a new 3D printed magnet holder that enables capture of magnetic microparticles in commercially available capillary electrophoresis equipment with a liquid or air based coolant system. The design as well as the method to capture magnetic microparticles inside the capillary are discussed. This setup was tested at temperature and pH values suitable for performing enzymatic reactions. To demonstrate its applicability in CE- immobilized microenzyme reactors (IMER) development, human flavin-containing monooxygenase 3 and bovine serum albumin were immobilized on amino functionalized magnetic microparticles using glutaraldehyde. These microparticles were subsequently used to perform in-line capillary electrophoresis with clozapine as a model substrate. This setup could be used further to establish CE-IMERs of other drug metabolic enzymes in a commercially available liquid based capillary coolant system. The CE-IMER setup was successful, although a subsequent decrease in enzyme activity was observed on repeated runs.

Synthesis modulation as a tool to increase the catalytic activity of metal-organic frameworks: the unique case of UiO-66(Zr).

The catalytic activity of the zirconium terephthalate UiO-66(Zr) can be drastically increased by using a modulation approach. The combined use of trifluoroacetic acid and HCl during the synthesis results in a highly crystalline material, with partial substitution of terephthalates by trifluoroacetate. Thermal activation of the material leads not only to dehydroxylation of the hexanuclear Zr cluster but also to post-synthetic removal of the trifluoroacetate groups, resulting in a more open framework with a large number of open sites. Consequently, the material is a highly active catalyst for several Lewis acid catalyzed reactions.

Design of zeolite by inverse sigma transformation.

Although the search for new zeolites has traditionally been based on trial and error, more rational methods are now available. The theoretical concept of inverse σ transformation of a zeolite framework to generate a new structure by removal of a layer of framework atoms and contraction has for the first time been achieved experimentally. The reactivity of framework germanium atoms in strong mineral acid was exploited to selectively remove germanium-containing four-ring units from an UTL type germanosilicate zeolite. Annealing of the leached framework through calcination led to the new all-silica COK-14 zeolite with intersecting 12- and 10-membered ring channel systems. An intermediate stage of this inverse σ transformation with dislodged germanate four-rings still residing in the pores could be demonstrated. Inverse σ transformation involving elimination of germanium-containing structural units opens perspectives for the synthesis of many more zeolites.

Towards a lattice-matching solid-state battery: synthesis of a new class of lithium-ion conductors with the spinel structure.

Lithium ion batteries have conquered most of the portable electronics market and are now on the verge of deployment in large scale applications. To be competitive in the automotive and stationary sectors, however, they must be improved in the fields of safety and energy density (W h L(-1)). Solid-state batteries with a ceramic electrolyte offer the necessary advantages to significantly improve the current state-of-the-art technology. The major limit towards realizing a practical solid-state lithium-ion battery lies in the lack of viable ceramic ionic conductors. Only a few candidate materials are available, each carrying a difficult balance between advantages and drawbacks. Here we introduce a new class of possible solid-state lithium-ion conductors with the spinel structure. Such compounds could be coupled with spinel-type electrode materials to obtain a "lattice matching" solid device where low interfacial resistance could be achieved. Powders were prepared by wet chemistry, their structure was studied by means of diffraction techniques and magic angle spinning NMR, and Li(+) self-diffusion was estimated by static NMR line shape measurements. Profound differences in the Li(+) diffusion properties were observed depending on the composition, lithium content and cationic distribution. Local Li(+) hopping in the spinel materials is accompanied by a low activation energy of circa 0.35 eV being comparable with that of, e.g., LLZO-type garnets, which represent the current benchmark in this field. We propose these novel materials as a building block for a lattice-matching all-spinel solid-state battery with low interfacial resistance.

NH2-MIL-53(Al): a high-contrast reversible solid-state nonlinear optical switch.

The metal-organic framework NH(2)-MIL-53(Al) is the first solid-state material displaying nonlinear optical switching due to a conformational change upon breathing. A switching contrast of at least 38 was observed. This transition originates in the restrained linker mobility in the very narrow pore configuration.

Copper benzene tricarboxylate metal-organic framework with wide permanent mesopores stabilized by Keggin polyoxometallate ions.

Porous solids with organized multiple porosity are of scientific and technological importance for broadening the application range from traditional areas of catalysis and adsorption/separation to drug release and biomedical imaging. Synthesis of crystalline porous materials offering a network of uniform micro- and mesopores remains a major scientific challenge. One strategy is based on variation of synthesis parameters of microporous networks, such as, for example, zeolites or metal-organic frameworks (MOFs). Here, we show the rational development of an hierarchical variant of the microporous cubic Cu(3)(BTC)(2) (BTC = 1,3,5-benzenetricarboxylate) HKUST-1 MOF having strictly repetitive 5 nm wide mesopores separated by uniform microporous walls in a single crystal structure. This new material coined COK-15 (COK = Centrum voor Oppervlaktechemie en Katalyse) was synthesized via a dual-templating approach. Stability was enhanced by Keggin type phosphotungstate (HPW) systematically occluded in the cavities constituting the walls between the mesopores.

Molecular organization of hydrophobic molecules and co-adsorbed water in SBA-15 ordered mesoporous silica material.

The purpose of this study was to improve our understanding of the molecular organization of hydrophobic guest molecules in the presence of co-adsorbed water inside SBA-15 ordered mesoporous silica material. Understanding this adsorption competition is essential in the development of applications of controlled adsorption and desorption. The poorly water soluble drug compound itraconazole and the fluorescent probe Nile red were selected for the study. The interaction between itraconazole and SBA-15 was investigated using FT-IR, (1)H MAS NMR and (29)Si MAS NMR spectroscopy, by determination of adsorption isotherms and release kinetics in simulated gastric fluid. The distribution and migration of the hydrophobic fluorescent probe Nile red was visualized in situ using confocal fluorescence microscopy. For both molecules, there was a pronounced influence of the co-adsorbed water on adsorption, hydrophobic aggregation and migration in SBA-15 pores. These insights contribute to the development of practical methods for loading ordered mesoporous silica materials with hydrophobic molecules.

Study of the adsorption of organic molecules on transition metal exchanged zeolites via solid state NMR. Part 1: theoretical aspects.

A theoretical study is performed of the (1)H relaxation behavior of an organic molecule that is adsorbed in a zeolite exchanged with transition metal ions. An expression is derived for the spin-lattice and spin-spin relaxation rate constant of a uniform proton ensemble, while the occurrence of molecular exchange is taken into account. The influence is analyzed of an approach of a uniform proton ensemble toward the nearest neighboring paramagnetic ion system. It is shown that there exists a signal extinction effect, for which the critical distance was estimated.

Study of the adsorption of organic molecules on transition metal exchanged zeolites via solid state NMR. Part 2: adsorption of organic molecules on zeolite NaX, CaX, and CaCoX.

Literature [Denayer et al. Microporous Mesoporous Mater. 2007, 103, 1 and Denayer et al. Microporous Mesoporous Mater. 2007, 103, 11] shows that zeolite NaX exchanged with Ca(2+) and Co(2+) ions is able to remove cyclopentadiene (CPD) impurities from a 1-octene feed with high selectivity. In the present work, the adsorption of dicyclopentadiene (DCPD), CPD, 1-octene, and n-octane on zeolite X, exchanged with Ca(2+) and/or Co(2+) ions, has been investigated via (1)H magic-angle spinning (MAS) NMR spectroscopy. The liquid adsorbate was dosed under inert atmosphere in an MAS rotor filled with dry adsorbent, at a pore filling degree of 70%. Next, the evolution in time was recorded of the (1)H MAS NMR spectrum and the (1)H spin-lattice and spin-spin relaxation times of the adsorbed components. For the various adsorbate-adsorbent systems, a plot is made of the signal intensity versus the square root of the contact time. It is found that, over the considered time interval, Fickian diffusion takes place. On the basis of the change in time of the spin-lattice relaxation time, a transport diffusion coefficient ranging between 1 and 2 x 10(-15) m(2) x s(-1) is calculated. Moreover, there appear to be two sorption regimes, with different diffusivities. A comparison is made between the (1)H spin-lattice relaxation behavior of DCPD, 1-octene, and n-octane, indicating that 1-octene and n-octane are located closer to the paramagnetic ions than DCPD. The average distance between the adsorbate molecules and the paramagnetic ions is derived from relaxometric data. By analyzing the chemical shifts of the resonance lines, it is found that the pi-interaction of CPD and 1-octene is stronger than that of DCPD.

Ternary Ag/MgO-SiO2 catalysts for the conversion of ethanol into butadiene.

Ternary Ag/Magnesia-silica catalysts were tested in the direct synthesis of 1,3-butadiene from ethanol. The influence of the silver content and the type of silica source on catalytic performance has been studied. Prepared catalysts were characterized by (29) Si NMR, N2 sorption, small-angle X-ray scattering measurements, XRD, environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM/EDX), FTIR spectroscopy of adsorbed pyridine and CO2 , temperature-programmed desorption of CO2 and UV/Vis diffuse reflectance spectroscopy. Based on these characterization results, the catalytic performance of the catalysts in the 1,3-butadiene formation process was interpreted and a tentative model explaining the role of the different catalytically active sites was elaborated. The balance of the active sites is crucial to obtain an active and selective catalyst to form 1,3-butadiene from ethanol. The optimal silver loading is 1-2 wt% on a MgO-silica support with a molar Mg/Si ratio of 2. The silver species and basic sites (Mg−O pairs and basic OH groups) are of prime importance in the 1,3-butadiene production, catalyzing mainly the ethanol dehydrogenation and the aldol condensation, respectively.

Convenient synthesis of Cu3(BTC)2 encapsulated Keggin heteropolyacid nanomaterial for application in catalysis.

Nanomaterial of Cu(3)(BTC)(2) (BTC = benzene tricarboxylic acid) incorporating Keggin heteropolyacid conveniently prepared at room temperature and recovered by freeze drying outperforms ultrastable Y zeolite in acid catalysed esterification reaction.

Itraconazole/TPGS/Aerosil200 solid dispersions: characterization, physical stability and in vivo performance.

Solid dispersions were successfully prepared by co-spray-drying of TPGS-stabilized itraconazole nanosuspensions with Aerosil200, followed by heat treatment of the powders. The itraconazole/Aerosil200 weight ratios amounted to 50/50, 30/70, 40/60 and 20/80. The itraconazole content of the powders was close to the expected value, with relative errors between 0.3% and 7.8%. X-ray powder diffraction (XRPD), solid state NMR (SSNMR) and differential scanning calorimetry (DSC) evaluation on the powders revealed the formation of amorphous itraconazole and the absence of glassy itraconazole. Dissolution of the powders was enhanced compared to crystalline and glassy itraconazole (a 2-dimensional structured form of itraconazole). However, no clear trend could be observed between drug loading and dissolution performance of the solid dispersions. Upon storage, conversion to crystalline itraconazole was observed for the 50/50 powder based on XRPD, SSNMR and DSC measurements. Although the 40/60 powder remained X-ray amorphous upon storage, DSC did reveal that a small fraction (7.5+/-1.6% after 10 months of storage) of itraconazole crystallized upon storage. For the 30/70 and 20/80 dispersions, no crystallization could be seen. After 10 months of storage, important changes in the dissolution behavior of the powders were observed. A decrease in dissolution performance was seen for the 50/50 dispersion, which could be attributed to the crystallization of itraconazole. On the other hand, the 40/60, 30/70 and 20/80 dispersions showed an increase in dissolution rate (more than 60% after 10 min). Although not completely clear at this stage, adsorption of itraconazole onto the Aerosil200 surface during storage might be responsible for this behavior. Finally, in vivo experiments were performed in the rat. Oral bioavailability of the 30/70 dispersion was, although lower compared to the marketed Sporanox formulation, significantly enhanced compared to the crystalline drug.

Formation of ZSM-22 zeolite catalytic particles by fusion of elementary nanorods.

An ZSM-22 aluminosilicate zeolite was synthesized using the hydrothermal gel method at 150 degrees C. Products obtained after different synthesis times were characterized using various techniques and catalytic testing. Massive formation of ZSM-22 nanocrystals occurs after only a short synthesis time, appearing as isolated rods with a cross section of 12+/-4 nm. Nanorods have aluminum enriched at their external surface. Later in the crystallization process nanorods align and fuse sideways, whereby the external surface is systematically converted into an internal micropore surface. The formation of aluminum bearing micropores by the joining of nanorod surfaces is responsible for the enhanced catalytic activity. For this, the zeolite synthesis of nanoscale crystallites is ineffective for enhancing catalytic activity.