Fabrication and characterization of a solid-state nanopore with self-aligned carbon nanoelectrodes for molecular detection.

Stochastic molecular sensors based on resistive pulse nanopore modalities are envisioned as facile DNA sequencers. However, recent advances in nanotechnology fabrication have highlighted promising alternative detection mechanisms with higher sensitivity and potential single-base resolution. In this paper we present the novel self-aligned fabrication of a solid-state nanopore device with integrated transverse graphene-like carbon nanoelectrodes for polyelectrolyte molecular detection. The electrochemical transduction mechanism is characterized and found to result primarily from thermionic emission between the two transverse electrodes. Response of the nanopore to Lambda dsDNA and short (16-mer) ssDNA is demonstrated and distinguished.

The applications of in situ electron energy loss spectroscopy to the study of electron beam nanofabrication.

An in situ electron energy loss spectroscopy (EELS) technique has been developed to investigate the dynamic processes associated with electron-beam nanofabrication on thin membranes. In this article, practical applications germane to e-beam nanofabrication are illustrated with a case study of the drilling of nanometer-sized pores in silicon nitride membranes. This technique involves successive acquisitions of the plasmon-loss and the core-level ionization-loss spectra in real time, both of which provide the information regarding the hole-drilling kinetics, including two respective rates for total mass loss, individual nitrogen and silicon element depletion, and the change of the atomic bonding environment. In addition, the in situ EELS also provides an alternative method for endpoint detection with a potentially higher time resolution than by imaging. On the basis of the time evolution of in situ EELS spectra, a qualitative working model combining knock-on sputtering, irradiation-induced mass transport, and phase separation can be proposed.

Nanopore with Transverse Nanoelectrodes for Electrical Characterization and Sequencing of DNA.

A DNA sequencing device which integrates transverse conducting electrodes for the measurement of electrode currents during DNA translocation through a nanopore has been nanofabricated and characterized. A focused electron beam (FEB) milling technique, capable of creating features on the order of 1 nm in diameter, was used to create the nanopore. The device was characterized electrically using gold nanoparticles as an artificial analyte with both DC and AC measurement methods. Single nanoparticle/electrode interaction events were recorded. A low-noise, high-speed transimpedance current amplifier for the detection of nano to picoampere currents at microsecond time scales was designed, fabricated and tested for future integration with the nanopore device.

Determination of mouth alcohol using the Dräger Evidential Portable Alcohol System.

Drivers suspected of alcohol intoxication are observed for a period of 15 min prior to quantitative breath alcohol testing. This is to preclude the interference of alcohol-based substances such as cough medicine, mouthwash, and breath spray just prior to actual evidential testing. To determine whether a 15 min observation period was necessary when performing evidential breath tests in the field, a mouth alcohol experiment was performed using the Dräger Evidential Portable Alcohol System (EPAS). Five types of alcohol beverages and the effects of expectorating versus swallowing were tested on twenty-five volunteer subjects. Serial measurements of breath and blood alcohol levels were performed at fixed time intervals. All alcohol beverage types gave two sequential measurements within 0.02 g/210 L of each other before 15 min had passed. Fifteen minutes was necessary to ensure there was no residual mouth alcohol. If the 15 min waiting period was not observed, the safety feature of the EPAS requiring two sequential measurements 2 min apart within 0.02 g/210 L would not ensure against mouth alcohol interference.

Morphological and spectroscopic measurements of plastic bags for the purpose of discrimination.

The discrimination of noncolored transparent polyethylene bags was studied by several nondestructive and semidestructive analytical methods. X-ray diffraction, infrared spectroscopy, and optical microscopy (differential interference contrast microscopy and phase contrast microscopy) were applied to polyethylene films. X-ray diffraction was used to distinguish variations in the crystalline phase, infrared spectroscopy was used to distinguish variations in the molecular components, and optical microscopy was used to distinguish the different surface morphologies. The results show that X-ray diffraction classifies the crystalline phase of the film depending on whether it is made from low-density polyethylene, linear low-density polyethylene, or high-density polyethylene; that infrared spectroscopy is useful to distinguish the molecular components and it is the most discriminating technique; and that optical microscopy discriminate films easily by their morphological differences.

An electron microscopy investigation of the structure of porous silicon by oxide replication.

The morphology of porous silicon is studied by scanning electron microscopy (SEM) by making an oxide replica of the pore structure. Highly branched n-type porous silicon samples were prepared and a replica was formed by oxidation of the pores followed by selective removal of the silicon substrate to expose the oxide pores. Scanning and transmission electron microscopy images confirmed many previously held assumptions about porous silicon formation, including the fractal structure and crystallographic propagation; they also provided a clearer understanding of the details of pore formation. The replica procedure also provides a platform for a more facile and comprehensive analysis of the porous silicon morphology.

Frequency dependence of gold nanoparticle superassembly by dielectrophoresis.

Dielectrophoresis is an effective method for capturing nanoparticles and assembling them into nanostructures. The frequency of the dielectrophoretic alternating current (ac) electric field greatly influences the morphology of resultant nanoparticle assemblies. In this study, frequency regimes associated with specific gold nanoparticle assembly morphologies were identified. Gold nanoparticles suspended in water were captured by microelectrodes at different electric field frequencies onto thin silicon nitride membranes. The resultant assemblies were examined by transmission electron microscopy. For this system, the major frequency-dependent influence on morphology appears to arise not from the Clausius-Mossotti factor of the dielectrophoretic force itself, but instead from ac electroosmotic fluid flow and the influence of the electrical double layer at the electrode-solution interface. Frequency regimes of technological interest include those forming one-dimensional nanoparticle chains, microwires, combinations of microwires and nanoparticle chains suitable for nanogap electrode formation, and dense three-dimensional assemblies with very high surface area.