Oxygen-Binding Sites of Enriched Gold Nanoclusters for Capturing Mitochondrial Reverse Electrons.

Reverse electron transfer (RET), an abnormal backward flow of electrons from complexes III/IV to II/I of mitochondria, causes the overproduction of a reduced-type CoQ to boost downstream production of mitochondrial superoxide anions that leads to ischemia-reperfusion injury (IRI) to organs. Herein, we studied low-coordinated gold nanoclusters (AuNCs) with abundant oxygen-binding sites to form an electron-demanding trapper that allowed rapid capture of electrons to compensate for the CoQ/CoQH2 imbalance during RET. The AuNCs were composed of only eight gold atoms that formed a Cs-symmetrical configuration with all gold atoms exposed on the edge site. The geometry and atomic configuration enhance oxygen intercalation to attain a d-band electron deficiency in frontier orbitals, forming an unusually high oxidation state for rapid mitochondrial reverse electron capture under a transient imbalance of CoQ/CoQH2 redox cycles. Using hepatic IRI cells/animals, we corroborated that the CoQ-like AuNCs prevent inflammation and liver damage from IRI via recovery of the mitochondrial function.

Hetero-Atomic Pairs with a Distal Fe3+ -Site Boost Water Oxidation.

The hetero-atomic interaction has been the subject of many investigations, due to their heterogeneity, the individual roles of the atoms are still difficult to realize. Herein, an electrocatalyst with a hetero-atomic pair confined on a tungsten phosphide (WP) substrate so that the Fe3+ -site of the pair is distal to the surface is shown to deliver an extremely low overpotential of 192 mV at 10 mA cm-2 and one of the highest oxygen production turnover frequencies (TOF) of 2.1 s-1 at 300 mV under alkaline environment for the oxygen evolution reaction (OER). Operando characterization shows the Lewis acidic Fe3+ site boosts a large population of Co4+/3+ and the deprotonation of coordinated water, allowing simultaneously enhanced electron-transfer as well as the proton-transfer. A significant contribution from the WP substrate modulates the order of hydroxide transfer in the pre-equilibrium step (PES) and rate-determining-step (RDS), leading to a remarkable OER performance.

In Situ Identifying the Dynamic Structure behind Activity of Atomically Dispersed Platinum Catalyst toward Hydrogen Evolution Reaction.

Single-atom catalysts (SAs) with the maximum atom utilization and breakthrough activities toward hydrogen evolution reaction (HER) have attracted considerable research interests. Uncovering the nature of single-atom metal centers under operating electrochemical condition is highly significant for improving their catalytic performance, yet is poorly understood in most studies. Herein, Pt single atoms anchoring on the nitrogen-carbon substrate (PtSA /N-C) as a model system are utilized to investigate the dynamic structure of Pt single-atom centers during the HER process. Via in situ/operando synchrotron X-ray absorption spectroscopy and X-ray photoelectron spectroscopy, an intriguing structural reconstruction at atomic level is identified in the PtSA /N-C when it is subjected to the repetitive linear sweep voltammetry and cyclic voltammetry scanning. It demonstrates that the PtN bonding tends to be weakened under cathodic potentials, which induces some Pt single atoms to dynamically aggregate into forming small clusters during the HER reaction. More importantly, experimental evidence and/or indicator is offered to correlate the observed Tafel slope with the dynamic structure of Pt catalysts. This work provides an evident understanding of SAs under electrocatalytic process and offers informative insights into constructing efficient catalysts at atomic level for electrochemical water-splitting system.

A Universal Approach for Controllable Synthesis of n-Specific Layered 2D Perovskite Nanoplates.

2D perovskites with chemical formula A'2 An-1 Bn X3n+1 have recently attracted considerable attention due to their tunable optical and electronic properties, which can be attained by varying the chemical composition. While high color-purity emitting perovskite nanomaterials have been accomplished through changing the halide composition, the preparation of single-phase, specific n-layer 2D perovskite nanomaterials is still pending because of the fast nucleation process of nanoparticles. We demonstrate a facile, rational and efficacious approach to synthesizing single-phase 2D perovskite nanoplates with a designated n number for both lead- and tin-based perovskites through kinetic control. Casting carboxylic acid additives in the reaction medium promotes selective formation of the kinetic product-multilayer 2D perovskite-in preference to the single-layer thermodynamic product. For the n-specific layered 2D perovskites, decreasing the number of octahedral layers per inorganic sheet leads to an increase of photoluminescence energy, radiative decay rate, and a significant boost in photostability.

Materials Engineering of Violin Soundboards by Stradivari and Guarneri.

We investigated the material properties of Cremonese soundboards using a wide range of spectroscopic, microscopic, and chemical techniques. We found similar types of spruce in Cremonese soundboards as in modern instruments, but Cremonese spruces exhibit unnatural elemental compositions and oxidation patterns that suggest artificial manipulation. Combining analytical data and historical information, we may deduce the minerals being added and their potential functions-borax and metal sulfates for fungal suppression, table salt for moisture control, alum for molecular crosslinking, and potash or quicklime for alkaline treatment. The overall purpose may have been wood preservation or acoustic tuning. Hemicellulose fragmentation and altered cellulose nanostructures are observed in heavily treated Stradivari specimens, which show diminished second-harmonic generation signals. Guarneri's practice of crosslinking wood fibers via aluminum coordination may also affect mechanical and acoustic properties. Our data suggest that old masters undertook materials engineering experiments to produce soundboards with unique properties.

Mechanism of Oxygen Evolution Catalyzed by Cobalt Oxyhydroxide: Cobalt Superoxide Species as a Key Intermediate and Dioxygen Release as a Rate-Determining Step.

The oxygen evolution reaction (OER) is the performance-limiting half reaction of water splitting, which can be used to produce hydrogen fuel using renewable energies. Whereas a number of transition metal oxides and oxyhydroxides have been developed as promising OER catalysts in alkaline medium, the mechanisms of OER on these catalysts are not well understood. Here we combine electrochemical and in situ spectroscopic methods, particularly operando X-ray absorption and Raman spectroscopy, to study the mechanism of OER on cobalt oxyhydroxide (CoOOH), an archetypical unary OER catalyst. We find the dominating resting state of the catalyst as a Co(IV) species CoO2. Through oxygen isotope exchange experiments, we discover a cobalt superoxide species as an active intermediate in the OER. This intermediate is formed concurrently to the oxidation of CoOOH to CoO2. Combing spectroscopic and electrokinetic data, we identify the rate-determining step of the OER as the release of dioxygen from the superoxide intermediate. The work provides important experimental fingerprints and new mechanistic perspectives for OER catalysts.

Chemical distinctions between Stradivari's maple and modern tonewood.

Violins made by Antonio Stradivari are renowned for having been the preferred instruments of many leading violinists for over two centuries. There have been long-standing questions about whether wood used by Stradivari possessed unique properties compared with modern tonewood for violin making. Analyses of maple samples removed from four Stradivari and a Guarneri instrument revealed highly distinct organic and inorganic compositions compared with modern maples. By solid-state 13C NMR spectroscopy, we observed that about one-third of hemicellulose had decomposed after three centuries, accompanied by signs of lignin oxidation. No apparent changes in cellulose were detected by NMR and synchrotron X-ray diffraction. By thermogravimetric analysis, historical maples exhibited reduced equilibrium moisture content. In differential scanning calorimetry measurements, only maples from Stradivari violins, but not his cellos, exhibited unusual thermooxidation patterns distinct from natural wood. Elemental analyses by inductively coupled plasma mass spectrometry suggested that Stradivari's maples were treated with complex mineral preservatives containing Al, Ca, Cu, Na, K, and Zn. This type of chemical seasoning was an unusual practice, unknown to later generations of violin makers. In their current state, maples in Stradivari violins have very different chemical properties compared with their modern counterparts, likely due to the combined effects of aging, chemical treatments, and vibrations. These findings may inspire further chemical experimentation with tonewood processing for instrument making in the 21st century.

A Cobalt-Iron Double-Atom Catalyst for the Oxygen Evolution Reaction.

Single-atom catalysts exhibit well-defined active sites and potentially maximum atomic efficiency. However, they are unsuitable for reactions that benefit from bimetallic promotion such as the oxygen evolution reaction (OER) in an alkaline medium. Here we show that a single-atom Co precatalyst can be in situ transformed into a Co-Fe double-atom catalyst for the OER. This catalyst exhibits one of the highest turnover frequencies among metal oxides. Electrochemical, microscopic, and spectroscopic data, including those from operando X-ray absorption spectroscopy, reveal a dimeric Co-Fe moiety as the active site of the catalyst. This work demonstrates double-atom catalysis as a promising approach for the development of defined and highly active OER catalysts.

Harnessing Dielectric Confinement on Tin Perovskites to Achieve Emission Quantum Yield up to 21.

Tin perovskite nanomaterial is one of the promising candidates to replace organic lead halide perovskites in lighting applications. Unfortunately, the performance of tin-based systems is markedly inferior to those featuring toxic Pb salts. In an effort to improve the emission quantum efficiency of nanoscale 2D layered tin iodide perovskites through fine-tuning the electronic property of organic ammonium salts, we came to unveil the relationship between dielectric confinement and the photoluminescent properties of tin iodide perovskite nanodisks. Our results show that increasing the dielectric contrast for organic versus inorganic layers leads to a bathochromic shift in emission peak wavelength, a decrease of exciton recombination time, and importantly a significant boost in the emission efficiency. Under optimized conditions, a leap in emission quantum yield to a record high 21% was accomplished for the nanoscale thienylethylammonium tin iodide perovskite (TEA2SnI4). The as-prepared TEA2SnI4 also possessed superior photostability, showing no sign of degradation under continuous irradiation (10 mW/cm2) over a period of 120 h.

Ni3 N as an Active Hydrogen Oxidation Reaction Catalyst in Alkaline Medium.

Hydroxide-exchange membrane fuel cells can potentially utilize platinum-group-metal (PGM)-free electrocatalysts, offering cost and scalability advantages over more developed proton-exchange membrane fuel cells. However, there is a lack of non-precious electrocatalysts that are active and stable for the hydrogen oxidation reaction (HOR) relevant to hydroxide-exchange membrane fuel cells. Here we report the discovery and development of Ni3 N as an active and robust HOR catalyst in alkaline medium. A supported version of the catalyst, Ni3 N/C, exhibits by far the highest mass activity and break-down potential for a PGM-free catalyst. The catalyst also exhibits Pt-like activity for hydrogen evolution reaction (HER) in alkaline medium. Spectroscopy data reveal a downshift of the Ni d band going from Ni to Ni3 N and interfacial charge transfer from Ni3 N to the carbon support. These properties weaken the binding energy of hydrogen and oxygen species, resulting in remarkable HOR activity and stability.

Identification of Stabilizing High-Valent Active Sites by Operando High-Energy Resolution Fluorescence-Detected X-ray Absorption Spectroscopy for High-Efficiency Water Oxidation.

Composite electrocatalysts have exhibited high activities toward water electrolysis, but the catalytically active sites really in charge of the reaction are still debatable while the conventional in situ X-ray spectroscopies are not capable of conclusively identifying the interaction of these materials with the electrolyte because of the complexity of catalysis. In this work, by utilization of operando Kß1,3 high-energy resolution fluorescence-detected X-ray absorption spectroscopy (HERFD-XAS) with a small incident angle, the operando quadrupole transition obviously showed that oxygen directly interacted with 3d orbitals of Co ions rather than that of Fe ions. Most importantly, Fe ions can promote the stabilization of the Co ions under a higher valent state during water oxidation, which may lead to a stable intermediate of reactant and its superior intrinsic activity. Accompanied by the first-principle calculations, the intermediates between 3d orbitals for surface Co ions and O 2p orbitals for the attaching hydroxide ions were ascribed to this orbital hybridization. Because of the unvaried structural features in conventional in situ techniques, operando HERFD-XAS revealed the remarkable change of chemical status to correlate with the orbital interaction rather than with the structural variation. This operando HERFD-XAS approach corresponding to the local orbital interaction in reactant/catalyst interface can potentially offer synergetic strategies toward realizing the chemical reactions or reaction pathways in various fields.

Dual-Hole Excitons Activated Photoelectrolysis in Neutral Solution.

II-VI semiconductors exhibit unique behaviors that can generate dual-holes ("heavy and light"), but the application in photocatalysis is still missing. Herein, an empirical utilization of light/heavy holes in a hybrid metal cluster-2D semiconductor nanoplatelets is reported. This hybrid material can boost the hole-transfer at the surface and suppress the recombination. Different roles are enacted by light-holes and heavy-holes, in which the light-holes with higher energy and mobility can facilitate the slow kinetics of water oxidation and further reduce the onset voltage, while the massive heavy-holes can increase the resulting photocurrent by about five times, achieving a photocurrent of 2 mA cm-2 at 1.23 V versus RHE under AM 1.5 G illumination in nonsacrificial neutral solution. These strategies can be the solutions for photoelectrolysis and be beneficial for sustainable development in solar conversion.

π-Conjugated Organic-Inorganic Hybrid Photoanodes: Revealing the Photochemical Behavior through In Situ X-Ray Absorption Spectroscopy.

Small-molecule organic semiconductors exhibit great potential for the photoelectrochemical oxidation of water because of their n-type semiconductor nature and their tunable bandgaps. In this work, several head-to-tail bis-coumarins were synthesized and their photophysical properties characterized. Their characteristics as n-type semiconductors were modified by varying the electronic character of substituents at positions 1 and 7, which enabled the energy level of the LUMO and the photoinduced charge-carrier-transfer efficiency to be modulated. X-Ray absorption near-edge structure (XANES) spectroscopy confirmed that the charge transfer is a crucial factor contributing to the resulting activity of the photoanode. The photoactivity of the photoanodes towards water oxidation was revealed to be governed by both the LUMO energy level and transfer efficiency of the photoinduced charge carriers. Among the studied molecules, a bis-coumarin with benzothiophenyl substituents showed the greatest potential as light absorber for photoelectrochemical water oxidation.

Edgeless Ag-Pt Bimetallic Nanocages: In Situ Monitor Plasmon-Induced Suppression of Hydrogen Peroxide Formation.

Improvements in the performance of electrocatalysts, along with continuing advances in selective pathway for target reaction, have great potential to offer opportunities in designing competitive reactions especially for using a photophysical process owing to its tunable properties. Herein, we demonstrated a first empirical evidence of suppressing the formation of undesired peroxide intermediate through plasmonic effects, in which plasmonic Ag-Pt bimetallic nanocages were synthesized with an edgeless feature, and a custom-made RDE/RRDE working station was designed to provide unique means by which to in situ realize the plasmon-induced effects toward the target reaction. The edgeless Ag-Pt bimetallic nanocages with hollow interior performed newly plasmon-induced effects, which was characteristic of photodependent nature to suppress the formation of undesired peroxide intermediate. We concluded that the plasmon-induced hot electron transfer governed the suppression of peroxide formation instead of plasmon-induced heating that would cause a negative effect (i.e., increase of peroxide yield), in which the hot electron transfer of Ag nanostructure offered a sufficient energy to populate the antibonding orbital of O2 as illustrated by in situ X-ray absorption approach. This rapid light-dependent nature corresponding to localized surface plasmon resonance in present nanocages can potentially offer synergetic strategies toward altering the chemical reactions or reaction pathways in various fields.

Valence- and element-dependent water oxidation behaviors: in situ X-ray diffraction, absorption and electrochemical impedance spectroscopies.

Metal oxides of the spinel family have shown great potential towards the oxygen evolution reaction (OER), but the fundamental OER mechanism of spinel oxides is still far from being completely understood, especially for the role of the metal ions. Owing to various coordinated sites of divalent/trivalent metals ions and surface conditions (morphology and defects), it is a great challenge to have a fair assessment of the electrocatalytic performance of spinel systems. Herein, we demonstrated a series of MFe2O4 (M = Fe, Co, Ni, Zn) with a well-controlled morphology to achieve a comprehensive study of electrocatalytic activity toward OER. By utilizing several in situ analyses, we could conclude a universal rule that the activities for OER in the metal oxide systems were determined by the occurrence of a phase transformation, and this structural transformation could work well in both crystallographic sites (Td and Oh sites). Additionally, the divalent metal ion significantly dominated the formation of oxyhydroxide through an epitaxial relationship, which depended on the atomic arrangement at the interface of spinel and metal oxyhydroxide, while trivalent metal ions remained unchanged as a host lattice. The metal oxyhydroxide was formed during a redox reaction rather than being formed during OER. The occurrence of the redox reaction seems to accompany a remarkable increase in resistance and capacitance might result from the structural transformation from spinel to metal oxyhydroxide. We believe that the approaching strategies and information obtained in the present study can offer a guide to designing a promising electrocatalytic system towards the oxygen evolution reaction and other fields.

Dynamic (Sub)surface-Oxygen Enables Highly Efficient Carbonyl-Coupling for Electrochemical Carbon Dioxide Reduction.

Nowadays, high-valent Cu species (i.e., Cuδ +) are clarified to enhance multi-carbon production in electrochemical CO2 reduction reaction (CO2RR). Nonetheless, the inconsistent average Cu valence states are reported to significantly govern the product profile of CO2RR, which may lead to misunderstanding of the enhanced mechanism for multi-carbon production and results in ambiguous roles of high-valent Cu species. Dynamic Cuδ + during CO2RR leads to erratic valence states and challenges of high-valent species determination. Herein, an alternative descriptor of (sub)surface oxygen, the (sub)surface-oxygenated degree (κ), is proposed to quantify the active high-valent Cu species on the (sub)surface, which regulates the multi-carbon production of CO2RR. The κ validates a strong correlation to the carbonyl (*CO) coupling efficiency and is the critical factor for the multi-carbon enhancement, in which an optimized Cu2O@Pd2.31 achieves the multi-carbon partial current density of ≈330 mA cm-2 with a faradaic efficiency of 83.5%. This work shows a promising way to unveil the role of high-valent species and further achieve carbon neutralization.

In situ X-ray spectroscopies beyond conventional X-ray absorption spectroscopy on deciphering dynamic configuration of electrocatalysts.

Realizing viable electrocatalytic processes for energy conversion/storage strongly relies on an atomic-level understanding of dynamic configurations on catalyst-electrolyte interface. X-ray absorption spectroscopy (XAS) has become an indispensable tool to in situ investigate dynamic natures of electrocatalysts but still suffers from limited energy resolution, leading to significant electronic transitions poorly resolved. Herein, we highlight advanced X-ray spectroscopies beyond conventional XAS, with emphasis on their unprecedented capabilities of deciphering key configurations of electrocatalysts. The profound complementarities of X-ray spectroscopies from various aspects are established in a probing energy-dependent "in situ spectroscopy map" for comprehensively understanding the solid-liquid interface. This perspective establishes an indispensable in situ research model for future studies and offers exciting research prospects for scientists and spectroscopists.

Activating dynamic atomic-configuration for single-site electrocatalyst in electrochemical CO2 reduction.

One challenge for realizing high-efficiency electrocatalysts for CO2 electroreduction is lacking in comprehensive understanding of potential-driven chemical state and dynamic atomic-configuration evolutions. Herein, by using a complementary combination of in situ/operando methods and employing copper single-atom electrocatalyst as a model system, we provide evidence on how the complex interplay among dynamic atomic-configuration, chemical state change and surface coulombic charging determines the resulting product profiles. We further demonstrate an informative indicator of atomic surface charge (φe) for evaluating the CO2RR performance, and validate potential-driven dynamic low-coordinated Cu centers for performing significantly high selectivity and activity toward CO product over the well-known four N-coordinated counterparts. It indicates that the structural reconstruction only involved the dynamic breaking of Cu-N bond is partially reversible, whereas Cu-Cu bond formation is clearly irreversible. For all single-atom electrocatalysts (Cu, Fe and Co), the φe value for efficient CO production has been revealed closely correlated with the configuration transformation to generate dynamic low-coordinated configuration. A universal explication can be concluded that the dynamic low-coordinated configuration is the active form to efficiently catalyze CO2-to-CO conversion.

Supported Ruthenium Single-Atom and Clustered Catalysts Outperform Benchmark Pt for Alkaline Hydrogen Evolution.

Guaranteeing satisfactory catalytic behavior while ensuring high metal utilization has become the problem that needs to be addressed when designing noble-metal-based catalysts for electrochemical reactions. Here, well-dispersed ruthenium (Ru) based clusters with adjacent Ru single atoms (SAs) on layered sodium cobalt oxide (Ru/NC) are demonstrated as a superb electrocatalyst for alkaline HER. The Ru/NC catalyst demonstrates an activity increase by a factor of two relative to the commercial Pt/C. Operando characterizations in conjunction with density functional theory (DFT) simulations uncover the origin of the superior activity and establish a structure-performance relationship, that is, under HER condition, the real active species are Ru SAs and metallic Ru clusters supported on the NC substrate. The excellent alkaline HER activity of the Ru/NC catalyst can be understood by a spatially decoupled water dissociation and hydrogen desorption mechanism, where the NC substrate accelerates the water dissociation rate, and the generated H intermediates would then migrate to the Ru SAs or clusters and recombine to have H2 evolution. More importantly, comparing the two forms of Ru sites, it is the Ru cluster that dominates the HER activity.

Identifying the geometric catalytic active sites of crystalline cobalt oxyhydroxides for oxygen evolution reaction.

Unraveling the precise location and nature of active sites is of paramount significance for the understanding of the catalytic mechanism and the rational design of efficient electrocatalysts. Here, we use well-defined crystalline cobalt oxyhydroxides CoOOH nanorods and nanosheets as model catalysts to investigate the geometric catalytic active sites. The morphology-dependent analysis reveals a ~50 times higher specific activity of CoOOH nanorods than that of CoOOH nanosheets. Furthermore, we disclose a linear correlation of catalytic activities with their lateral surface areas, suggesting that the active sites are exclusively located at lateral facets rather than basal facets. Theoretical calculations show that the coordinatively unsaturated cobalt sites of lateral facets upshift the O 2p-band center closer to the Fermi level, thereby enhancing the covalency of Co-O bonds to yield the reactivity. This work elucidates the geometrical catalytic active sites and enlightens the design strategy of surface engineering for efficient OER catalysts.