Growth Factors, Carrier Materials, and Bone Repair.

This chapter provides an overview of the growth factors active in bone regeneration and healing. Both normal and impaired bone healing are discussed, with a focus on the spatiotemporal activity of the various growth factors known to be involved in the healing response. The review highlights the activities of most important growth factors impacting bone regeneration, with a particular emphasis on those being pursued for clinical translation or which have already been marketed as components of bone regenerative materials. Current approaches the use of bone grafts in clinical settings of bone repair (including bone grafts) are summarized, and carrier systems (scaffolds) for bone tissue engineering via localized growth factor delivery are reviewed. The chapter concludes with a consideration of how bone repair might be improved in the future.

Aryl Hydrocarbon Receptor Antagonists Mitigate the Effects of Dioxin on Critical Cellular Functions in Differentiating Human Osteoblast-Like Cells.

The inhibition of bone healing in humans is a well-established effect associated with cigarette smoking, but the underlying mechanisms are still unclear. Recent work using animal cell lines have implicated the aryl hydrocarbon receptor (AhR) as a mediator of the anti-osteogenic effects of cigarette smoke, but the complexity of cigarette smoke mixtures makes understanding the mechanisms of action a major challenge. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD, dioxin) is a high-affinity AhR ligand that is frequently used to investigate biological processes impacted by AhR activation. Since there are dozens of AhR ligands present in cigarette smoke, we utilized dioxin as a prototype ligand to activate the receptor and explore its effects on pro-osteogenic biomarkers and other factors critical to osteogenesis using a human osteoblast-like cell line. We also explored the capacity for AhR antagonists to protect against dioxin action in this context. We found dioxin to inhibit osteogenic differentiation, whereas co-treatment with various AhR antagonists protected against dioxin action. Dioxin also negatively impacted cell adhesion with a corresponding reduction in the expression of integrin and cadherin proteins, which are known to be involved in this process. Similarly, the dioxin-mediated inhibition of cell migration correlated with reduced expression of the chemokine receptor CXCR4 and its ligand, CXCL12, and co-treatment with antagonists restored migratory capacity. Our results suggest that AhR activation may play a role in the bone regenerative response in humans exposed to AhR activators, such as those present in cigarette smoke. Given the similarity of our results using a human cell line to previous work done in murine cells, animal models may yield data relevant to the human setting. In addition, the AhR may represent a potential therapeutic target for orthopedic patients who smoke cigarettes, or those who are exposed to secondhand smoke or other environmental sources of aryl hydrocarbons.

The effect of rhBMP-2 in a novel, non-instrumented extremity nonunion model.

BACKGROUND: Pre-clinical models of bony nonunion typically employ critical-length defects. However, these models may not accurately reflect clinical practice since many nonunions are diagnosed without bone loss. We developed a non-displaced rat ulna fracture model in order to examine the efficacy of recombinant human bone morphogenetic protein-2 (rhBMP-2) with an absorbable collagen sponge (ACS) for nonunion treatment. METHODS: Transverse diaphyseal ulna fractures were created in 24 Sprague-Dawley rats. Eight animals (Group 1: Nonunion) received no further intervention. The remaining 16 animals were treated with 5 µg rhBMP-2/ACS at 8 weeks after the original intervention (Group 2: Nonunion + BMP) or at the time of initial injury (Group 3: Fresh fracture + BMP). RESULTS: In Group 1, 7 of 8 fractures demonstrated gross motion and a persistent radiographic gap (12.5% healing rate). In Groups 2 and 3, fractures healed at a rate of 75% (6 of 8 in each group) as determined by manual and radiographic evaluation. Biomechanical testing for torque load-to-failure and torsional stiffness demonstrated no significant difference between healed specimens treated with rhBMP-2. CONCLUSIONS: To our knowledge, this is the first description of a physiologic, non-stabilized, non-defect fracture nonunion model in a rodent. Furthermore, unlike previous nonunion models, the healing rates after treatment with rhBMP-2 are comparable to that of clinical data, suggesting that this model may provide an environment more representative of nonunions in humans.

Factors influencing arthrodesis rates in a rabbit posterolateral spine model with iliac crest autograft.

PURPOSE: The rabbit posterolateral intertransverse spine arthrodesis model has been widely used to evaluate spinal biologics. However, to date, the validity and reproducibility of performance of iliac crest bone graft, the most common and critical control group, has not been firmly established. We evaluated original research publications that utilized this model, identified which experimental conditions affected fusion rates, and developed an algorithm to predict fusion rates for future study designs. METHODS: A MEDLINE search was performed for publications through December, 2011 that utilized this model to evaluate fusion rates elicited by iliac crest autograft. All study parameters were recorded, and logistic regression analyses were performed to determine the effects of these variables on fusion rates as determined by either manual palpation or radiographs. RESULTS: Seventy studies with 959 rabbits in 102 groups met the inclusion criteria. Excluding studies that measured fusion at 4 or fewer weeks or intentionally tried to decrease the fusion rate, the overall fusion rate for autograft was 58.3 ± 16.3 % (mean ± SD) as determined by manual palpation and 66.4 ± 17.8 % by plain radiographs. Regression analysis demonstrated a difference between these outcome measures with a trend towards significance (p = 0.09). Longer time points and larger volumes of autograft resulted in significantly greater reported fusion rates (p < 0.0001 and p < 0.05, respectively). Neither strain, age, weight, nor vertebral level significantly affected fusion rates. CONCLUSIONS: Although experimental conditions varied across studies, time point evaluation and autograft volume significantly affected fusion rates. Despite some variability demonstrated across certain studies, we demonstrated that when the time point and volume of autograft were controlled for, the iliac crest control group of the rabbit posterolateral spinal arthrodesis model is both reliable and predictably affected by different experimental conditions.

3D-ink-extruded titanium scaffolds with porous struts and bioactive supramolecular polymers for orthopedic implants.

Porous titanium addresses the longstanding orthopedic challenges of aseptic loosening and stress shielding. This work expands on the evolution of porous Ti with the manufacturing of hierarchically porous, low stiffness, ductile Ti scaffolds via direct-ink write (DIW) extrusion and sintering of inks containing Ti and NaCl particles. Scaffold macrochannels were filled with a subtherapeutic dose of recombinant bone morphogenetic protein-2 (rhBMP-2) alone or co-delivered within a bioactive supramolecular polymer slurry (SPS) composed of peptide amphiphile nanofibrils and collagen, creating four treatment conditions (Ti struts: microporous vs. fully dense; BMP-2 alone or with SPS). The BMP-2-loaded scaffolds were implanted bilaterally across the L4 and L5 transverse processes in a rat posterolateral lumbar fusion model. In-vivo bone growth in these scaffolds is evaluated with synchrotron X-ray computed microtomography (µCT) to study the effects of strut microporosity and added biological signaling agents on the bone formation response. Optical and scanning electron microscopy confirms the ∼100 µm space-holder micropore size, high-curvature morphology, and pore fenestrations within the struts. Uniaxial compression testing shows that the microporous strut scaffolds have low stiffness and high ductility. A significant promotion in bone formation was observed for groups utilizing the SPS, while no significant differences were found for the scaffolds with the incorporation of micropores. STATEMENT OF SIGNIFICANCE: By 2050, the anticipated number of people aged 60 years and older worldwide is anticipated to double to 2.1 billion. This rapid increase in the geriatric population will require a corresponding increase in orthopedic surgeries and more effective materials for longer indwelling times. Titanium alloys have been the gold standard of bone fusion and fixation, but their use has longstanding limitations in bone-implant stiffness mismatch and insufficient osseointegration. We utilize 3D-printing of titanium with NaCl space holders for large- and small-scale porosity and incorporate bioactive supramolecular polymers into the scaffolds to increase bone growth. This work finds no significant change in bone ingrowth via space-holder-induced microporosity but significant increases in bone ingrowth via the bioactive supramolecular polymers in a rat posterolateral fusion model.

A Mechanistic and Preclinical Assessment of BioRestore Bioactive Glass as a Synthetic Bone Graft Extender and Substitute for Osteoinduction and Spine Fusion.

STUDY DESIGN: Preclinical animal study. OBJECTIVE: Evaluate the osteoinductivity and bone regenerative capacity of BioRestore bioactive glass. SUMMARY OF BACKGROUND DATA: BioRestore is a Food and Drug Administration (FDA)-approved bone void filler that has not yet been evaluated as a bone graft extender or substitute for spine fusion. METHODS: In vitro and in vivo methods were used to compare BioRestore with other biomaterials for the capacity to promote osteodifferentiation and spinal fusion. The materials evaluated (1) absorbable collagen sponge (ACS), (2) allograft, (3) BioRestore, (4) Human Demineralized Bone Matrix (DBM), and (5) MasterGraft. For in vitro studies, rat bone marrow-derived stem cells (BMSC) were cultured on the materials in either standard or osteogenic media (SM, OM), followed by quantification of osteogenic marker genes ( Runx2, Osx, Alpl, Bglap, Spp1 ) and alkaline phosphatase (ALP) activity. Sixty female Fischer rats underwent L4-5 posterolateral fusion (PLF) with placement of 1 of 5 implants: (1) ICBG from syngeneic rats; (2) ICBG+BioRestore; (3) BioRestore alone; (4) ICBG+Allograft; or (5) ICBG+MasterGraft. Spines were harvested 8 weeks postoperatively and evaluated for bone formation and fusion via radiography, blinded manual palpation, microCT, and histology. RESULTS: After culture for 1 week, BioRestore promoted similar expression levels of Runx2 and Osx to cells grown on DBM. At the 2-week timepoint, the relative ALP activity for BioRestore-OM was significantly higher ( P <0.001) than that of ACS-OM and DBM-OM ( P <0.01) and statistically equivalent to cells grown on allograft-OM. In vivo, radiographic and microCT evaluation showed some degree of bridging bone formation in all groups tested, with the exception of BioRestore alone, which did not produce successful fusions. CONCLUSIONS: This study demonstrates the capacity of BioRestore to promote osteoinductivity in vitro. In vivo, BioRestore performed similarly to commercially available bone graft extender materials but was incapable of producing fusion as a bone graft substitute. LEVEL OF EVIDENCE: Level V.

Optimization of peptide amphiphile-lipid raft interaction by changing peptide amphiphile lipophilicity.

Various peptide amphiphile (PA) molecules have been developed to promote bone regeneration. Previously we discovered that a peptide amphiphile with a palmitic acid tail (C16) attenuates the signaling threshold of leucine-rich amelogenin peptide (LRAP)-mediated Wnt activation by increasing membrane lipid raft mobility. In the current study, we found that treatment of murine ST2 cells with an inhibitor (Nystatin) or Caveolin-1-specific siRNA abolishes the effect of C16 PA, indicating that Caveolin-mediated endocytosis is required. To determine whether hydrophobicity of the PA tail plays a role in its signaling effect, we modified the length of the tail (C12, C16 and C22) or composition (cholesterol). While shortening the tail (C12) decreased the signaling effect, lengthening the tail (C22) had no prominent effect. On the other hand, the cholesterol PA displayed a similar function as the C16 PA at the same concentration of 0.001% w/v. Interestingly, a higher concentration of C16 PA (0.005%) is cytotoxic while cholesterol PA at the higher concentration (0.005%) is well-tolerated by cells. Use of the cholesterol PA at 0.005% enabled a further reduction of the signaling threshold of LRAP to 0.20 nM, compared to 0.25 nM at 0.001%. Caveolin-mediated endocytosis is also required for cholesterol PA, as evidenced by Caveolin-1 siRNA knockdown experiments. We further demonstrated that the noted effects of cholesterol PA are also observed in human bone marrow mesenchymal stem cells (BMMSCs). Taken together, these results indicate that the cholesterol PA modulates lipid raft/caveolar dynamics, thereby increasing receptor sensitivity for activation of canonical Wnt signaling. STATEMENT OF SIGNIFICANCE: Cell signaling involves not only the binding of growth factors (or other cytokines) and cognate receptors, but also their clustering on the cell membrane. However, little or no work has been directed thus far toward investigating how biomaterials can serve to enhance growth factor or peptide signaling by increasing diffusion of cell surface receptors within membrane lipid rafts. Therefore, a better understanding of the cellular and molecular mechanism(s) operating at the material-cell membrane interface during cell signaling has the potential to change the paradigm in designing future biomaterials and regenerative medicine therapeutics. In this study, we designed a peptide amphiphile (PA) with a cholesterol tail to enhance canonical Wnt signaling by modulating lipid raft/caveolar dynamics.

A supramolecular polymer-collagen microparticle slurry for bone regeneration with minimal growth factor.

Recombinant bone morphogenetic protein-2 (BMP-2) is a potent osteoinductive growth factor that can promote bone regeneration for challenging skeletal repair and even for ectopic bone formation in spinal fusion procedures. However, serious clinical side effects related to supraphysiological dosing highlight the need for advances in novel biomaterials that can significantly reduce the amount of this biologic. Novel biomaterials could not only reduce clinical side effects but also expand the indications for use of BMP-2, while at the same time lowering the cost of such procedures. To achieve this objective, we have developed a slurry containing a known supramolecular polymer that potentiates BMP-2 signaling and porous collagen microparticles. This slurry exhibits a paste-like consistency that stiffens into an elastic gel upon implantation making it ideal for minimally invasive procedures. We carried out in vivo evaluation of the novel biomaterial in the rabbit posterolateral spine fusion model, and discovered efficacy at unprecedented ultra-low BMP-2 doses (5 µg/implant). This dose reduces the growth factor requirement by more than 100-fold relative to current clinical products. This observation is significant given that spinal fusion involves ectopic bone formation and the rabbit model is known to be predictive of human efficacy. We expect the novel biomaterial can expand BMP-2 indications for difficult cases requiring large volumes of bone formation or involving patients with underlying conditions that compromise bone regeneration.

Preclinical Safety of a 3D-Printed Hydroxyapatite-Demineralized Bone Matrix Scaffold for Spinal Fusion.

STUDY DESIGN: Prospective, randomized, controlled preclinical study. OBJECTIVE: The objective of this study was to compare the host inflammatory response of our previously described hyperelastic, 3D-printed (3DP) hydroxyapatite (HA)-demineralized bone matrix (DBM) composite scaffold to the response elicited with the use of recombinant human bone morphogenetic protein-2 (rhBMP-2) in a preclinical rat posterolateral lumbar fusion model. SUMMARY OF BACKGROUND DATA: Our group previously found that this 3D-printed HA-DBM composite material shows promise as a bone graft substitute in a preclinical rodent model, but its safety profile had yet to be assessed. METHODS: Sixty female Sprague-Dawley rats underwent bilateral posterolateral intertransverse lumbar spinal fusion using with the following implants: 1) type I absorbable collagen sponge (ACS) alone; 2) 10 µg rhBMP-2/ACS; or 3) the 3DP HA-DBM composite scaffold (n = 20). The host inflammatory response was assessed using magnetic resonance imaging, while the local and circulating cytokine expression levels were evaluated by enzyme-linked immunosorbent assays at subsequent postoperative time points (N = 5/time point). RESULTS: At both 2 and 5 days postoperatively, treatment with the HA-DBM scaffold produced significantly less soft tissue edema at the fusion bed site relative to rhBMP-2-treated animals as quantified on magnetic resonance imaging. At every postoperative time point evaluated, the level of soft tissue edema in HA-DBM-treated animals was comparable to that of the ACS control group. At 2 days postoperatively, serum concentrations of tumor necrosis factor-α and macrophage chemoattractant protein-1 were significantly elevated in the rhBMP-2 treatment group relative to ACS controls, whereas these cytokines were not elevated in the HA-DBM-treated animals. CONCLUSION: The 3D-printed HA-DBM composite induces a significantly reduced host inflammatory response in a preclinical spinal fusion model relative to rhBMP-2.Level of Evidence: N/A.

Sex-based Difference in Response to Recombinant Human Bone Morphogenetic Protein-2 in a Rat Posterolateral Fusion Model.

STUDY DESIGN: This was a preclinical study. OBJECTIVE: Evaluate sex-dependent differences in the bone healing response to recombinant human bone morphogenetic protein-2 (rhBMP-2) in a rat posterolateral spinal fusion model. SUMMARY OF BACKGROUND DATA: Minimal and conflicting data exist concerning potential sex-dependent differences in rhBMP-2-mediated bone regeneration in the context of spinal fusion. MATERIALS AND METHODS: Forty-eight female and male Sprague-Dawley rats (N=24/group), underwent L4-L5 posterolateral fusion with bilateral placement of an absorbable collagen sponge, each loaded with 5 µg of bone morphogenetic protein-2 (10 µg/animal). At eight weeks postoperative, 10 specimens of each sex were tested in flexion-extension with quantification of range of motion and stiffness. The remaining specimens were evaluated for new bone growth and successful fusion via radiography, blinded manual palpation and microcomputed tomography (microCT). Laboratory microCT quantified bone microarchitecture, and synchrotron microCT examined bone microstructure at the 1 µm level. RESULTS: Manual palpation scores differed significantly between sexes, with mean fusion scores of 2.4±0.4 in females versus 3.1±0.6 in males ( P <0.001). Biomechanical stiffness did not differ between sexes, but range of motion was significantly greater and more variable for females versus males (3.7±5.6° vs. 0.27±0.15°, P <0.005, respectively). Laboratory microCT showed significantly smaller volumes of fusion masses in females versus males (262±87 vs. 732±238 mm 3 , respectively, P <0.001) but significantly higher bone volume fraction (0.27±0.08 vs. 0.12±0.05, respectively, P <0.001). Mean trabecular thickness was not different, but trabecular number was significantly greater in females (3.1±0.5 vs. 1.5±0.4 mm -1 , respectively, P <0.001). Synchrotron microCT showed fine bone structures developing in both sexes at the eight-week time point. CONCLUSIONS: This study demonstrates sex-dependent differences in bone regeneration induced by rhBMP-2. Further investigation is needed to uncover the extent of and mechanisms underlying these sex differences, particularly at different doses of rhBMP-2.

Influence of Geometry and Architecture on the In Vivo Success of 3D-Printed Scaffolds for Spinal Fusion.

We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed material comprising hydroxyapatite (HA) and demineralized bone matrix (DBM) for bone regeneration. This material has demonstrated the capacity to promote re-mineralization of the DBM particles within the scaffold struts and shows potential to promote successful spine fusion. Here, we investigate the role of geometry and architecture in osteointegration, vascularization, and facilitation of spine fusion in a preclinical model. Inks containing HA and DBM particles in a poly(lactide-co-glycolide) elastomer were 3D-printed into scaffolds with varying relative strut angles (90° vs. 45° advancing angle), macropore size (0 µm vs. 500 µm vs. 1000 µm), and strut alignment (aligned vs. offset). The following configurations were compared with scaffolds containing no macropores: 90°/500 µm/aligned, 45°/500 µm/aligned, 90°/1000 µm/aligned, 45°/1000 µm/aligned, 90°/1000 µm/offset, and 45°/1000 µm/offset. Eighty-four female Sprague-Dawley rats underwent spine fusion with bilateral placement of the various scaffold configurations (n = 12/configuration). Osteointegration and vascularization were assessed by using microComputed Tomography and histology, and spine fusion was assessed via blinded manual palpation. The 45°/1000 µm scaffolds with aligned struts achieved the highest average fusion score (1.61/2) as well as the highest osteointegration score. Both the 45°/1000 µm/aligned and 90°/1000 µm/aligned scaffolds elicited fusion rates of 100%, which was significantly greater than the 45°/500 µm/aligned iteration (p < 0.05). All porous scaffolds were fully vascularized, with blood vessels present in every macropore. Vessels were also observed extending from the native transverse process bone, through the protrusions of new bone, and into the macropores of the scaffolds. When viewed independently, scaffolds printed with relative strut angles of 45° and 90° each allowed for osteointegration sufficient to stabilize the spine at L4-L5. Within those parameters, a pore size of 500 µm or greater was generally sufficient to achieve unilateral fusion. However, our results suggest that scaffolds printed with the larger pore size and with aligned struts at an advancing angle of 45° may represent the optimal configuration to maximize osteointegration and fusion capacity. Overall, this work suggests that the HA/DBM composite scaffolds provide a conducive environment for bone regeneration as well as vascular infiltration. This technology, therefore, represents a novel, growth-factor-free biomaterial with significant potential as a bone graft substitute for use in spinal surgery. Impact statement We previously developed a recombinant growth factor-free, three-dimensional (3D)-printed composite material comprising hydroxyapatite and demineralized bone matrix for bone regeneration. Here, we identify a range of 3D geometric and architectural parameters that support the preclinical success of the scaffold, including efficient vascularization, osteointegration, and, ultimately, spinal fusion. Our results suggest that this material holds great promise as a clinically translatable biomaterial for use as a bone graft substitute in orthopedic procedures requiring bone regeneration.

Effect of Postoperative Analgesic Exposure to the Cannabinoid Receptor Agonist WIN55 on Osteogenic Differentiation and Spinal Fusion in Rats.

BACKGROUND: After spinal surgery and other orthopaedic procedures, most patients receive opioids for pain, leading to potential complications such as pseudarthrosis and opioid abuse associated with long-term use. As an alternative, the endocannabinoid system has been shown to have antinociceptive activity, while contributing to bone homeostasis via the CB1 and CB2 cannabinoid receptors. This study evaluates the impact of the cannabinoid receptor agonist WIN55,212-2 (WIN55) on osteogenic differentiation in vitro as well as bone regeneration and spinal fusion in a preclinical rat model. METHODS: Primary rat bone marrow stromal cells were cultured in standard or osteogenic media and exposed to vehicle alone or WIN55. Runx2 and Alkaline phosphatase (Alpl) were quantified via qPCR (quantitative real-time polymerase chain reaction), followed by assessment of ALP activity and matrix mineralization. For in vivo evaluation, 45 female Sprague Dawley rats (n = 15 per group) underwent L4-L5 posterolateral spinal fusion with bilateral placement of collagen scaffolds preloaded with low-dose rhBMP-2 (recombinant human bone morphogenetic protein-2; 0.5 µg/implant). Postoperatively, rats received the vehicle alone or 0.5 or 2.5 mg/kg WIN55 via daily intraperitoneal injections for 5 days. Bone regeneration and spinal fusion were assessed using radiography, manual palpation-based fusion scoring, microcomputed tomography imaging, and histology. RESULTS: mRNA expression levels of Runx2 and Alp were similar among cells treated with vehicle alone and WIN55. Likewise, exposure to WIN55 did not inhibit ALP activity or bone matrix mineralization. In this animal model, no significant differences were found among groups with regard to mean fusion score, fusion rate, or new bone volume. CONCLUSIONS: WIN55 showed no adverse impact on osteogenic differentiation, bone regeneration, and spinal fusion. This supports that cannabinoid receptor agonists should be further investigated as a potential alternative approach for postoperative analgesia following spinal fusion and other orthopaedic procedures requiring bone-healing. CLINICAL RELEVANCE: The identification of alternative treatments for postoperative pain following orthopaedic surgical procedures is crucial in combating the ongoing opioid abuse crisis. The endocannabinoid system may represent a viable alternative target for addressing orthopaedic postoperative pain.

The effect of local steroid application on bony fusion in a rat posterolateral spinal arthrodesis model.

INTRODUCTION: Local steroid administration during anterior cervical spine surgery has been shown to improve postoperative dysphagia. However, concerns over potential complications remain. This study aims to evaluate the effect of local steroid administration on bone regeneration and spine fusion in a preclinical model, as well as the impact on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hBM-MSCs) in a 3D culture system. MATERIALS AND METHODS: Forty-five rats underwent bilateral L4-L5 posterolateral lumbar fusion (PLF) utilizing local delivery of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2; 0.5 µg/implant). Rats were divided into three groups: no steroid (control), low dose (0.5 mg/kg), and high dose (2.5 mg/kg) of triamcinolone. Bone growth and fusion were assessed using radiography, blinded manual palpation, and micro-CT analysis and were visualized by histology. The impact of triamcinolone exposure on osteogenic differentiation of hBM-MSCs was evaluated by gene expression analysis, alkaline phosphatase activity assay, and alizarin red staining. RESULTS: No significant differences in fusion scores or rates were seen in the low- or high-dose steroid treatment groups relative to untreated controls. Quantification of new bone formation via micro-CT imaging revealed no significant between-group differences in the volume of newly regenerated bone. Triamcinolone also had no negative impact on pro-osteogenic gene transcript levels, and ALP activity was enhanced in the presence of triamcinolone. Mineral deposition appeared comparable in cultures grown with and without triamcinolone. CONCLUSIONS: Local steroid application does not seem to inhibit rhBMP-2-mediated spine fusion in rats, though our study may not be adequately powered to detect differences in fusion as measured by manual palpation or bone volume as measured by micro-CT. These findings suggest that local triamcinolone may not increase pseudarthrosis in spine fusion procedures. Further large animal and clinical studies to verify its safety and efficacy are warranted.

Characterizing the host response to rhPDGF-BB in a rat spinal arthrodesis model.

BACKGROUND: Due to the constraints surrounding autograft bone, surgeons have turned to osteoinductive agents to augment spinal fusion. Reports of complications and questionable efficacy slowed the adoption of these alternatives. Recombinant human platelet-derived growth factor B homodimer (rhPDGF-BB) has been Food and Drug Administration (FDA)-approved (Augment) to promote fusion in other areas of orthopedics, but its characterization in spine fusion has not yet been tested. The purpose of this study is to characterize the host response to PDGF-BB in vivo. METHODS: Eighty female Fischer rats underwent L4-5 posterolateral fusion using one of four implant types: (a) iliac crest syngeneic allograft harvested from syngeneic donors, (b) ß-TCP/bovine collagen matrix (ß-TCP/Col) with sodium acetate buffer, (c) ß-TCP/Col with 0.3 mg/mL "low dose," or (d) ß-TCP/Col with 3.0 mg/mL "high dose" of rhPDGF-BB. Animals underwent magnetic resonance imaging (MRI) and serum cytokine quantification at 4, 7, 10, and 21 days, postoperatively. Tissues were processed for immunofluorescence staining for Ki67 and von Willebrand factor (vWF) to assess neovascularization. RESULTS: MRI demonstrated no differences in fluid accumulation among the four treatment groups at any of the time points. Serum cytokine analysis showed no clinically significant differences between treatment groups in 20 of the 27 cytokines. Inflammatory cytokines IFN-γ, IL-1ß, IL-18, MCP-1, MIP-1α, TNF-α were not induced by rhPDGF-BB. Histology showed no differences in cell infiltration, and Ki67 and vWF immunofluorescence staining was similar among groups. CONCLUSIONS: rhPDGF-BB delivered with a ß-TCP/Col matrix exerts no exaggerated systemic or local host inflammatory response when compared to iliac crest syngeneic allograft bone or the control carrier. rhPDGF-BB mixed with a ß-TCP/Col matrix could be a viable and safe biologic alternative to syngeneic allograft in spine fusion. Further studies need to be performed to evaluate efficacy in this setting.

Osteoinductivity and biomechanical assessment of a 3D printed demineralized bone matrix-ceramic composite in a rat spine fusion model.

We recently developed a recombinant growth factor-free bone regenerative scaffold composed of stoichiometric hydroxyapatite (HA) ceramic particles and human demineralized bone matrix (DBM) particles (HA-DBM). Here, we performed the first pre-clinical comparative evaluation of HA-DBM relative to the industry standard and established positive control, recombinant human bone morphogenetic protein-2 (rhBMP-2), using a rat posterolateral spinal fusion model (PLF). Female Sprague-Dawley rats underwent bilateral L4-L5 PLF with implantation of the HA-DBM scaffold or rhBMP-2. Fusion was evaluated using radiography and blinded manual palpation, while biomechanical testing quantified the segmental flexion-extension range-of-motion (ROM) and stiffness of the fused segments at 8-weeks postoperatively. For mechanistic studies, pro-osteogenic gene and protein expression at 2-days and 1-, 2-, and 8-weeks postoperatively was assessed with another cohort. Unilateral fusion rates did not differ between the HA-DBM (93%) and rhBMP-2 (100%) groups; however, fusion scores were higher with rhBMP-2 (p = 0.008). Both treatments resulted in significantly reduced segmental ROM (p < 0.001) and greater stiffness (p = 0.009) when compared with non-operated controls; however, the degree of stabilization was significantly higher with rhBMP-2 treatment relative to the HA-DBM scaffold. In the mechanistic studies, PLGA and HA scaffolds were used as negative controls. Both rhBMP-2 and HA-DBM treatments resulted in significant elevations of several osteogenesis-associated genes, including Runx2, Osx, and Alp. The rhBMP-2 treatment led to significantly greater early, mid, and late osteogenic markers, which may be the mechanism in which early clinical complications are seen. The HA-DBM scaffold also induced osteogenic gene expression, but primarily at the 2-week postoperative timepoint. Overall, our findings show promise for this 3D-printed composite as a recombinant growth factor-free bone graft substitute for spinal fusion. STATEMENT OF SIGNIFICANCE: Despite current developments in bone graft technology, there remains a significant void in adequate materials for bone regeneration in clinical applications. Two of the most efficacious bone graft options are the gold-standard iliac crest bone graft and recombinant human-derived bone morphogenetic protein-2 (rhBMP-2), available commercially as Infuse™. Although efficacious, autologous graft is associated with donor-site morbidity, and Infuse™ has known side effects related to its substantial host inflammatory response, possibly associated with a immediate, robust osteoinductive response. Hence, there is a need for a bone graft substitute that provides adequate osteogenesis without associated adverse events. This study represents a significant step in the design of off-the-shelf growth factor-free devices for spine fusion.

Supramolecular self-assembling peptides to deliver bone morphogenetic proteins for skeletal regeneration.

Recombinant human bone morphogenetic proteins (BMPs) have shown clinical success in promoting bone healing, but they are also associated with unwanted side effects. The development of improved BMP carriers that can retain BMP at the defect site and maximize its efficacy would decrease the therapeutic BMP dose and thus improve its safety profile. In this review, we discuss the advantages of using self-assembling peptides, a class of synthetic supramolecular biomaterials, to deliver recombinant BMPs. Peptide amphiphiles (PAs) are a broad class of self-assembling peptides, and the use of PAs for BMP delivery and bone regeneration has been explored extensively over the past decade. Like many self-assembling peptide systems, PAs can be designed to form nanofibrous supramolecular biomaterials in which molecules are held together by non-covalent bonds. Chemical and biological functionality can be added to PA nanofibers, through conjugation of chemical moieties or biological epitopes to PA molecules. For example, PA nanofibers have been designed to bind heparan sulfate, a natural polysaccharide that is known to bind BMPs and potentiate their signal. Alternatively, PA nanofibers have been designed to synthetically mimic the structure and function of heparan sulfate, or to directly bind BMP specifically. In small animal models, these bio-inspired PA materials have shown the capacity to promote bone regeneration using BMP at doses 10-100 times lower than established therapeutic doses. These promising results have motivated further evaluation of PAs in large animal models, where their safety and efficacy must be established before clinical translation. We conclude with a discussion on the possiblity of combining PAs with other materials used in orthopaedic surgery to maximize their utility for clinical translation.

Nanostructured Biomaterials for Bone Regeneration.

This review article addresses the various aspects of nano-biomaterials used in or being pursued for the purpose of promoting bone regeneration. In the last decade, significant growth in the fields of polymer sciences, nanotechnology, and biotechnology has resulted in the development of new nano-biomaterials. These are extensively explored as drug delivery carriers and as implantable devices. At the interface of nanomaterials and biological systems, the organic and synthetic worlds have merged over the past two decades, forming a new scientific field incorporating nano-material design for biological applications. For this field to evolve, there is a need to understand the dynamic forces and molecular components that shape these interactions and influence function, while also considering safety. While there is still much to learn about the bio-physicochemical interactions at the interface, we are at a point where pockets of accumulated knowledge can provide a conceptual framework to guide further exploration and inform future product development. This review is intended as a resource for academics, scientists, and physicians working in the field of orthopedics and bone repair.

3D-Printed Ceramic-Demineralized Bone Matrix Hyperelastic Bone Composite Scaffolds for Spinal Fusion.

Although numerous spinal biologics are commercially available, a cost-effective and safe bone graft substitute material for spine fusion has yet to be proven. In this study, "3D-Paints" containing varying volumetric ratios of hydroxyapatite (HA) and human demineralized bone matrix (DBM) in a poly(lactide-co-glycolide) elastomer were three-dimensional (3D) printed into scaffolds to promote osteointegration in rats, with an end goal of spine fusion without the need for recombinant growth factor. Spine fusion was evaluated by manual palpation, and osteointegration and de novo bone formation within scaffold struts were evaluated by laboratory and synchrotron microcomputed tomography and histology. The 3:1 HA:DBM composite achieved the highest mean fusion score and fusion rate (92%), which was significantly greater than the 3D printed DBM-only scaffold (42%). New bone was identified extending from the host transverse processes into the scaffold macropores, and osteointegration scores correlated with successful fusion. Strikingly, the combination of HA and DBM resulted in the growth of bone-like spicules within the DBM particles inside scaffold struts. These spicules were not observed in DBM-only scaffolds, suggesting that de novo spicule formation requires both HA and DBM. Collectively, our work suggests that this recombinant growth factor-free composite shows promise to overcome the limitations of currently used bone graft substitutes for spine fusion. Impact Statement Currently, there exists a no safe, yet highly effective, bone graft substitute that is well accepted for use in spine fusion procedures. With this work, we show that a three-dimensional printed scaffold containing osteoconductive hydroxyapatite and osteoinductive demineralized bone matrix that promotes new bone spicule formation, osteointegration, and successful fusion (stabilization) when implemented in a preclinical model of spine fusion. Our study suggests that this material shows promise as a recombinant growth factor-free bone graft substitute that could safely promote high rates of successful fusion and improve patient care.

Fatty acid hydroperoxides support cytochrome P450 2S1-mediated bioactivation of benzo[a]pyrene-7,8-dihydrodiol.

In the accompanying report (p. 1031), we showed that a novel dioxin-inducible cytochrome P450, CYP2S1, efficiently metabolizes benzo[a]pyrene-trans-7,8-dihydrodiol (BaP-7,8-diol) into the highly mutagenic and carcinogenic benzo[a]pyrene-r-7,t-8-dihydrodiol-t-9,10-epoxide (BaP-diol-t-epoxide), using cumene hydroperoxide in lieu of NADPH/O(2). Lipid hydroperoxide-supported P450 oxidation has been reported in several cases. However, it has not yet been described for the bioactivation of BaP-7,8-diol. In this report, we demonstrate that CYP2S1 can use various fatty acid hydroperoxides to support epoxidation of BaP-7,8-diol at a much higher rate than with cumene hydroperoxide. Kinetic analyses with several fatty acid hydroperoxides revealed that 13S-hydroperoxy-9Z,11E-octadecadienoic acid (13-HpODE) was the most potent oxidant tested (K(m), 3.4 +/- 0.8 microM; turnover, 4.51 +/- 0.13 min(-1)), followed by 12S-hydroperoxy-5Z,8Z,10E,14Z-eicosatetraenoic acid (K(m), 2.8 +/- 0.7 microM; turnover, 3.7 +/- 0.1 min(-1)), 5S-hydroperoxy-6E,8Z,11Z,14Z-eicosatetraenoic acid (K(m), 2.7 +/- 0.8 microM; turnover, 3.69 +/- 0.09 min(-1)), and 15S-hydroperoxy-5Z,8Z,10E,14Z-eicosatetraenoic acid (K(m), 11.6 +/- 0.3 microM; turnover, 0.578 +/- 0.030 min(-1)). The antioxidant butylated hydroxyanisole inhibited CYP2S1-catalyzed epoxidation by 100%, suggesting that epoxidation proceeds by a free radical mechanism. Other cytochromes P450, including CYP1A1, CYP1B1, CYP1A2, and CYP3A4, were also able to epoxidize BaP-7,8-diol using various fatty acid hydroperoxides, although at slower rates than CYP2S1. The cytotoxicity of BaP-7,8-diol significantly increased in mammalian cells overexpressing CYP2S1, and BaP-diol-t-epoxide formation in these cells also increased in the presence of 13-HpODE. Together, these results suggest that fatty acid hydroperoxides can serve as physiological cofactors in supporting in vivo CYP2S1-catalyzed oxidation of BaP-7,8-diol, and that fatty acid hydroperoxides and CYP2S1 may play important roles in benzo[a]pyrene-induced carcinogenesis.

Structural identification of Diindole agonists of the aryl hydrocarbon receptor derived from degradation of indole-3-pyruvic acid.

Aerobic incubation of the tryptophan transamination/oxidation product indole-3-pyruvic acid (I3P) at pH 7.4 and 37 degrees C yielded products with activity as Ah receptor (AHR) agonists. The extracts were fractionated using HPLC and screened for AHR agonist activity. Two compounds were identified as agonists: 1,3-di(1H-indol-3-yl)propan-2-one (1) and 1-(1H-indol-3-yl)-3-(3H-indol-3-ylidene) propan-2-one (2), with the potency of 2 being 100-fold > 1 [ Nguyen et al. ( 2009 ) Chem. Res. Toxicol. , DOI: 10.1021/tx900043s . ]. Both 1 and 2 showed UV spectra indicative of indole. The molecular formulas were established by high-resolution mass spectrometry (HRMS), and the structures were determined by a combination of NMR methods, including (1)H, natural abundance (13)C, and two-dimensional methods. An intermediate in the oxidation of I3P to 1 is 3-hydroxy-2,4-di(1H-indol-3-yl)butanal (HRMS established the presence of a compound with the formula C(20)H(19)N(2)O(2)). Compound 1 was converted to 2 in air or (faster) with mild oxidants, and 2 could be further oxidized to 1,3-di(3H-indol-3-ylidene)propan-2-one. Determination of the structures allowed estimation of the molar Ah receptor agonist activity of these natural products, similar in potency to known classical AHR inducers.