Cross-reactive antibodies against dust mite-derived enolase induce neutrophilic airway inflammation.

BACKGROUND AND AIMS: Neutrophilic inflammation is a hallmark of some specific asthma phenotypes; its aetiology is not yet fully understood. House dust mite (HDM) is the most common factor in the pathogenesis of airway inflammation. This study aims to elucidate the role of cross-antibodies against HDM-derived factors in the development of neutrophilic inflammation in the airway. METHODS: Blood samples were collected from asthma patients with chronic neutrophilic asthma for analysis of HDM-specific cross-reactive antibodies. The role of an antibody against HDM-derived enolase (EnoAb) in the impairment of airway epithelial barrier function and induction of airway inflammation was assessed in a cell culture model and an animal model. RESULTS: High similarity (72%) of the enolase gene sequences was identified between HDM and human. Serum EnoAb was detected in patients with chronic neutrophilic asthma. The EnoAb bound to airway epithelial cells to form complexes with enolase, which activated complement, impaired airway epithelial barrier functions and induced neutrophilic inflammation in the airway tissues. CONCLUSIONS: HDM-derived enolase can induce specific cross-antibodies in humans, which induce neutrophilic inflammation in the airway.

Biochemistry and use of soybean isoflavones in functional food development.

Soybeans and their food products exist in the market in various forms, ranging from crude oils and bean meals to nutritious products (e.g. soy milk powers). With the availability of technologies for mass production of soy products and for enrichment of soy components (e.g. phospholipids, saponins, isoflavones, oligosaccharides and edible fiber), the nutritional values of soy products have been enhanced remarkably, offering the potential for functional food development. Among different bioactive components in soybeans, one important component is isoflavones, which have been widely exploited for health implications. While there are studies supporting the health benefits of isoflavones, concerns on adverse effects have been raised in the literature. The objective of this article is to review the recent understanding of the biological activities, adverse effects, and use of isoflavones in functional food development.

Hydroxypropyl-ß-cyclodextrin for Delivery of Baicalin via Inclusion Complexation by Supercritical Fluid Encapsulation.

Over the years, various methods have been developed to enhance the solubility of insoluble drugs; however, most of these methods are time-consuming and labor intensive or involve the use of toxic materials. A method that can safely and effectively enhance the solubility of insoluble drugs is lacking. This study adopted baicalin as an insoluble drug model, and used hydroxypropyl-ß-cyclodextrin for the delivery of baicalin via the inclusion complexation by supercritical fluid encapsulation. Different parameters for the complex preparation as well as the physicochemical properties of the complex have been investigated. Our results showed that when compared to the conventional solution mixing approach, supercritical fluid encapsulation enables a more precise control of the properties of the complex, and gives higher loading and encapsulation efficiency. It is anticipated that our reported method can be useful in enhancing the preparation efficiency of inclusion complexes, and can expand the application potential of insoluble herbal ingredients in treatment development and pharmaceutical formulation.

Coaxial-printed small-diameter polyelectrolyte-based tubes with an electrostatic self-assembly of heparin and YIGSR peptide for antithrombogenicity and endothelialization.

Low patency ratio of small-diameter vascular grafts remains a major challenge due to the occurrence of thrombosis formation and intimal hyperplasia after transplantation. Although developing the functional coating with release of bioactive molecules on the surface of small-diameter vascular grafts are reported as an effective strategy to improve their patency ratios, it is still difficult for current functional coatings cooperating with spatiotemporal control of bioactive molecules release to mimic the sequential requirements for antithrombogenicity and endothelialization. Herein, on basis of 3D-printed polyelectrolyte-based vascular grafts, a biologically inspired release system with sequential release in spatiotemporal coordination of dual molecules through an electrostatic self-assembly was first described. A series of tubes with tunable diameters were initially fabricated by a coaxial extrusion printing method with customized nozzles, in which a polyelectrolyte ink containing of ε-polylysine and sodium alginate was used. Further, dual bioactive molecules, heparin with negative charges and Tyr-Ile-Gly-Ser-Arg (YIGSR) peptide with positive charges were layer-by-layer assembled onto the surface of these 3D-printed tubes. Due to the electrostatic interaction, the sequential release of heparin and YIGSR was demonstrated and could construct a dynamic microenvironment that was thus conducive to the antithrombogenicity and endothelialization. This study opens a new avenue to fabricate a small-diameter vascular graft with a biologically inspired release system based on electrostatic interaction, revealing a huge potential for development of small-diameter artificial vascular grafts with good patency.

Modification of PLGA Scaffold by MSC-Derived Extracellular Matrix Combats Macrophage Inflammation to Initiate Bone Regeneration via TGF-ß-Induced Protein.

The immunologic response toward chronic inflammation or bone regeneration via the accumulation of M1 or M2 macrophages after injury could determine the fate of biomaterial. Human umbilical cord mesenchymal stem cells (hUCMSCs) have a pivotal immunomodulatory property on directing macrophage behaviors. Herein, for the first time, 3D-printed poly(lactide-co-glycolide) (PLGA) scaffolds modified with hUCMSC-derived extracellular matrix (PLGA-ECM) are prepared by a facile tissue engineering technique with physical decellularization and 2.44 ± 0.29 mg cm-3 proteins immobilized on the PLGA-ECM contain multiple soluble cytokines with a sustainable release profile. The PLGA-ECM not only attenuates the foreign body response, but also improves bone regeneration by increasing the accumulation of M2 macrophages in an improved heterotopic transplantation model of SCID mice. Furthermore, the PLGA-ECM scaffolds with the knockdown of transforming growth factor-ß-induced protein (TGFßI/ßig-H3) demonstrate that M2 macrophage accumulation improved by the PLGA-ECM could be attributed to increasing the migration of M2 macrophages and the repolarization of M1 macrophages to M2 phenotype, which are mediated by multiple integrin signaling pathways involving in integrin ß7, integrin α9, and integrin ß1 in a TGFßI-dependent manner. This study presents an effective surface modification strategy of polymeric scaffolds to initiate tissue regeneration and combat inflammatory response by increasing M2 macrophage accumulation.

Gene synthesizing, expression and immunogenicity characterization of recombinant translation elongation factor 2 from Dermatophagoides farinae.

House dust mite (HDM) hypersensitivity increasingly affects millions of individuals worldwide. Although numerous major allergens produced by HDM species have been characterized, some of the less potent allergens remain to be studied. The present study aimed to obtain the recombinant allergen of Translation Elongation Factor 2 (TEF 2) from the HDM Dermatophagoides farinae by synthesizing, and then expressing the recombinant TEF 2 to identify its immunogenicity. In the present study, the D. farinae TEF 2 (Der f TEF 2) was synthesized, expressed and purified. The molecular characteristics of Der f TEF 2 were analyzed using bioinformatics approaches. The recombinant protein was purified via affinity chromatography, and the allergenicity was assessed using immunoblotting, ELISAs and skin prick tests. The gene for TEF 2 consists of 2,535 bp and encodes an 844­amino acid protein. A positive response to recombinant Der f TEF 2 was detected in 16.2% of 37 patients with HDM allergies using skin prick tests. In addition, the immunoblotting indicated that the protein showed a high ability to bind serum IgE from patients allergic to HDMs, and that the recombinant TEF 2 was highly immunogenic. Bioinformatics analysis predicted 17 peptides as B cell epitopes (amino acids 29­35, 55­64, 92­99, 173­200, 259­272, 311­318, 360­365, 388­395, 422­428, 496­502, 512­518, 567­572, 580­586, 602­617, 785­790, 811­817 and 827­836) and 14 peptides as T cell epitopes (amino acids 1­15, 65­79, 120­134, 144­159, 236­250, 275­289, 404­418, 426­440, 463­477, 510­524, 644­658, 684­698, 716­730 and 816­830). The software DNAStar predicted the secondary structure of TEF 2, and showed that 27 α­helices and five ß­sheets were found in the protein. In conclusion, the present study cloned and expressed the Der f TEF 2 gene, and the recombinant protein exhibited immunogenicity, providing a theoretical bases, and references, for the diagnosis and treatment of allergic disease.

A biocompatible and easy-to-make polyelectrolyte dressing with tunable drug delivery properties for wound care.

Chitosan (CS) is a biodegradable and biocompatible polysaccharide which displays immune-stimulatory effects and anti-bacterial properties to facilitate wound closure. Over the years, different CS-based dressings have been developed; however, most of them are not fully biodegradable due to the involvement of synthetic polymers during dressing fabrication. In addition, preparation of many of these dressings is laborious, and may impose damaging effects on fragile therapeutic molecules. The objective of this study is to address these problems by developing a tunable, biocompatible, and biodegradable CS-based dressing for wound treatment. The dressing is fabricated via electrostatic interactions between CS and carmellose (CM). Its swelling properties, erosion behavior, loading efficiency and drug release sustainability can be tuned by simply changing the CS/CM mass-to-mass ratio. Upon loaded with minocycline hydrochloride, the dressing effectively protects the wound in mice from infection and enhances wound closure. Regarding its high tunability and promising in vivo performance, our dressing warrants further development as a user-friendly dressing for use in wound care.

Three-Dimensional Printing of Biodegradable Piperazine-Based Polyurethane-Urea Scaffolds with Enhanced Osteogenesis for Bone Regeneration.

Synthetic biodegradable polymeric scaffolds with uniformly interconnected pore structure, appropriate mechanical properties, excellent biocompatibility, and even enhanced osteogenesis ability are urgently required for in situ bone regeneration. In this study, for the first time, a series of biodegradable piperazine (PP)-based polyurethane-urea (P-PUU) scaffolds with a gradient of PP contents were developed by air-driven extrusion 3D printing technology. The P-PUU ink of 60 wt % concentration was demonstrated to have appropriate viscosity for scaffold fabrication. The 3D-printed P-PUU scaffolds exhibited an interconnected porous structure of about 450 µm in macropore size and about 75% in porosity. By regulating the contents of PP in P-PUU scaffolds, their mechanical properties could be moderated, and P-PUU1.4 scaffolds with the highest PP contents exhibited the highest compressive modulus (155.9 ± 5.7 MPa) and strength (14.8 ± 1.1 MPa). Moreover, both in vitro and in vivo biological results suggested that the 3D-printed P-PUU scaffolds possessed excellent biocompatibility and osteoconductivity to facilitate new bone formation. The small molecular PP itself was confirmed for the first time to regulate osteogenesis of osteoblasts in a dose-dependent manner and the optimum concentration for osteoconductivity was about ∼0.5 mM, which suggests that PP molecules, together with the mechanical behavior, nitrogen-contents, and hydrophilicity of P-PUUs, play an important role in enhancing the osteoconductive ability of P-PUU scaffolds. Therefore, the 3D-printed P-PUU scaffolds, with suitable interconnected pore structure, appropriate mechanical properties, and intrinsically osteoconductive ability, should provide a promising alternative for bone regeneration.