Improving two-way satellite time and frequency transfer with redundant links for UTC generation.

Two-way satellite time and frequency transfer (TWSTFT) is a primary technique for the generation of coordinated universal time (UTC). At present, more than 12 timing laboratories around the world use SAtellite Time and Ranging Equipment (SATRE) modems in TWSTFT operations and contribute data for the realization of UTC. The advantages of TWSTFT are its small calibration uncertainty (≤1.0 ns if the link is calibrated with a TWSTFT mobile station) and its long-term link stability. However, the precision of SATRE TWSTFT in the operational networks is degraded by a daily variation pattern (diurnal) in the TWSTFT results. The diurnal with varying amplitude appears virtually in all SATRE TWSTFT links. The observed peak-topeak variation of the diurnals can reach 2.0 ns in some cases. So far, studies on the sources of the diurnal have not provided conclusive understanding of the diurnal's dominant origin. Therefore, efforts have been made to reduce the impact of the diurnal variation in TWSTFT for UTC computation. The BIPM has been using the combination of SATRE TWSTFT results and GPS carrier-phase precise point positioning solutions (GPSPPP) for UTC computation since 2010. The combination adjusts the GPSPPP results to long-term averages of TWSTFT and is effectively free from the diurnal variations because the GPSPPP results contain almost no diurnal. Lately, the use of software-defined radio receivers (SDR) in TWSTFT has shown one way of how to reduce the diurnal variations by a factor of two to three in most of the inner-continental SATRE TWSTFT links, and furthermore, how the short-term stability for all UTC SDR TWSTFT links can be improved. In addition, there has been research on the full use of the redundancy in the TWSTFT network to improve the TWSTFT link stability. Recent studies on evaluating indirect links revealed that it is possible to apply a simplified procedure to use the redundancy, in a most effective way, to reduce the diurnal variations in the Europeto-Europe SATRE TWSTFT links by a factor of two to three. Based on these findings, we gained new insights about the diurnals and its dominant origin(s) which are discussed in this paper. The methods of the combination of SATRE TWSTFT and GPSPPP as well as the indirect SATRE TWSTFT links utilize the redundancy in the UTC time transfer network. SDR TWSTFT can largely reduce the diurnal in SATRE TWSTFT, but noticeable residual diurnal remains. In this paper, we provide the analyses of using the combination of SDR TWSTFT and GPSPPP results, as well as using the indirect SDR TWSTFT links. This paper concludes that the use of SDR TWSTFT redundant links can further improve the stabilities of UTC TWSTFT links. In addition, the use of SDR TWSTFT indirect links is a pure TWSTFT solution. The independence of the TWSTFT results to GPS results can improve the robustness of UTC computation.

Doping ZnO Electron Transport Layers with MoS2 Nanosheets Enhances the Efficiency of Polymer Solar Cells.

In this study, we incorporated molybdenum disulfide (MoS2) nanosheets into sol-gel processing of zinc oxide (ZnO) to form ZnO:MoS2 composites for use as electron transport layers (ETLs) in inverted polymer solar cells featuring a binary bulk heterojunction active layer. We could effectively tune the energy band of the ZnO:MoS2 composite film from 4.45 to 4.22 eV by varying the content of MoS2 up to 0.5 wt %, such that the composite was suitable for use in bulk heterojunction photovoltaic devices based on poly[bis(5-(2-ethylhexyl)thien-2-yl)benzodithiophene- alt-(4-(2-ethylhexyl)-3-fluorothienothiophene)-2-carboxylate-2,6-diyl] (PTB7-TH)/phenyl-C71-butryric acid methyl ester (PC71BM). In particular, the power conversion efficiency (PCE) of the PTB7-TH/PC71BM (1:1.5, w/w) device incorporating the ZnO:MoS2 (0.5 wt %) composite layer as the ETL was 10.1%, up from 8.8% for the corresponding device featuring ZnO alone as the ETL, a relative increase of 15%. Incorporating a small amount of MoS2 nanosheets into the ETL altered the morphology of the ETL and resulted in enhanced current densities, fill factors, and PCEs for the devices. We used ultraviolet photoelectron spectroscopy, synchrotron grazing incidence wide-/small-angle X-ray scattering, atomic force microscopy, and transmission electron microscopy to characterize the energy band structures, internal structures, surface roughness, and morphologies, respectively, of the ZnO:MoS2 composite films.

Safety monitoring in vaccine development and immunization.

The development of vaccines has been one of the most important achievement in preventive medicine. As the incidence of vaccine-preventable diseases is reduced by immunization, general public becomes increasingly concerned about the safety associated with vaccine. Vaccine safety is extensively evaluated through animal safety studies, clinical trials, during manufacturing processes, and postlicensure surveillance. Safety monitoring in postlicensure surveillance has relied on passive reporting system and epidemiological studies, including Vaccine Adverse Event Reporting System (VARES), Vaccine Safety Datalink (VSD) Project and others. Approximately 10,000 reports per year are submitted to VAERS. About 15% of these describe serious events and 85% of reports are classified as not-serious events. The system analyzed frequently reported adverse reactions, rare events, intussusception after rotavirus vaccine, cases of sudden infant death syndrome (SIDS), and safety of various vaccines. The evidence for a causal relationship with vaccines can be classified into five categories: no evidence, evidence was inadequate to accept or reject, evidence favors rejection, evidence favors a causal relationship, and evidence established. Future challenges involve improving survey and monitoring system of adverse events after immunization, enhancing vaccine safety research and vaccine risk communication, and possibility of increased reactogenicity in new and combined vaccines.

Block Copolymer-Tuned Fullerene Electron Transport Layer Enhances the Efficiency of Perovskite Photovoltaics.

In this study, we enhanced the power conversion efficiency (PCE) of perovskite solar cells by employing an electron transfer layer (ETL) comprising [6,6]phenyl-C61-butyric acid methyl ester (PC61BM) and, to optimize its morphology, a small amount of the block copolymer polystyrene-b-poly(ethylene oxide) (PS-b-PEO), positioned on the perovskite active layer. When incorporating 0.375 wt % PS-b-PEO into PC61BM, the PCE of the perovskite photovoltaic device increased from 9.4% to 13.4%, a relative increase of 43%, because of a large enhancement in the fill factor of the device. To decipher the intricate morphology of the ETL, we used synchrotron grazing-incidence small-angle X-ray scattering for determining the PC61BM cluster size, atomic force microscopy and scanning electron microscopy for probing the surface, and transmission electron microscopy for observing the aggregation of PC61BM in the ETL. We found that the interaction between PS-b-PEO and PC61BM resulted in smaller PC61BM clusters that further aggregated into dendritic structures in some domains, a result of the similar polarities of the PS block and PC61BM; this behavior could be used to tune the morphology of the ETL. The optimal PS-b-PEO-mediated PC61BM cluster size in the ETL was 17 nm, a large reduction from 59 nm for the pristine PC61BM layer. This approach of incorporating a small amount of nanostructured block copolymer into a fullerene allowed us to effectively tune the morphology of the ETL on the perovskite active layer and resulted in enhanced fill factors of the devices and thus their device efficiency.

Structural development of gold and silver nanoparticles within hexagonally ordered spherical micellar diblock copolymer thin films.

The spatial arrangement of metal nanoparticle (NP) arrays in block copolymers has many potential applications in OFET-type memory devices. In this study, we adopted a trapping approach in which we used a monolayer thin film of polystyrene-block-poly(4-vinylpyridine) (PS56k-b-P4VP8k)-a highly asymmetric diblock copolymer having a spherical micelle morphology-to incorporate various amounts of one-phase-synthesized dodecanethiol-passivated silver (DT-Ag) NPs and a fixed amount of ligand-exchanged pyridine-coated gold (Py-Au) NPs into the polystyrene (PS) and poly(4-vinylpyridine) (P4VP) blocks, respectively. We characterized the packing of these metal NPs in the two blocks of the nanostructured diblock copolymer using reciprocal-space synchrotron grazing incidence small-angle X-ray scattering (GISAXS) as well as atomic force microscopy (AFM) and transmission electron microscopy (TEM) in the real space. The packing of the Ag NPs in the PS block was dependent on their content, which we tuned by varying the concentrations in the composite solution at a constant rate of spin-coating. The two-dimensional hierarchical arrangement of Ag and Au NPs within the BCP thin films was enhanced after addition of the Py-Au NPs into the P4VP block and after spin-coating a thinner film from a low concentration solution (0.1 wt%), due to the DT-Ag NPs accumulating around the Py-Au/P4VP cores; this two-dimensional hierarchical arrangement decreased at a critical DT-Ag NP weight ratio (c) of 0.8 when incorporating the Py-Au NPs into the P4VP domains through spin-coating at higher solution concentration (0.5 wt%), where the DT-Ag NPs realigned by rotating 20° along the z axis in the real space, due to oversaturation of the DT-Ag NPs within the PS domains.

Improvement of the Asia-Pacific TWSTFT network solutions by using DPN results.

Two major time and frequency transfer techniques, two-way satellite time and frequency transfer (TWSTFT) and global navigation satellite systems (GNSS: GPS, GALILEO, GLONASS, etc.), are used for the generation of Coordinated Universal Time (UTC)/International Atomic Time (TAI). These time and frequency transfer links comprise a worldwide network and the utilization of the highly redundant time and frequency data is an important topic. Two methods, either TW-only network (i.e., TWSTFT) or single-link combination of TW and Global Positioning System (GPS), have been developed for combining the redundant data from different techniques. In our previous study, we have proposed a feasible method, utilizing full time-transfer network data, to improve the results of TWSTFT network. The National Institute of Information and Communications Technology (NICT) has recently developed a software-based two-way time-transfer modem using a dual pseudo-random noise (DPN) signal. The first international DPN TWSTFT experiment, using these modems, was performed between NICT (Japan) and Telecommunication Laboratories (TL; Taiwan)and its ability to improve the time transfer precision was demonstrated. In comparison with the conventional NICT­TLTWSTFT link, the DPN time transfer results have higher precision and lower diurnal effects. The estimation also shows that DPN is comparable to GPS precise point positioning (PPP).Because the DPN results show better performance than the conventional TWSTFT results, we would adopt the DPN data for the NICT­TL link and solve the TW+DPN network solutions by using our proposed method. The concept of this application is similar to the so-called multi-technique-network time/frequency transfer. The encouraging results confirm that the TWSTFT network performance can benefit from DPN data by improving short-term stabilities and reducing diurnal effects.The results of TW+PPP network solutions are also illustrated.

First international two-way satellite time and frequency transfer experiment employing dual pseudo-random noise codes.

Two-way satellite time and frequency transfer (TWSTFT) is one of the main techniques used to compare atomic time scales over long distances. To both improve the precision of TWSTFT and decrease the satellite link fee, a new software-defined modem with dual pseudo-random noise (DPN) codes has been developed. In this paper, we demonstrate the first international DPN-based TWSTFT experiment over a period of 6 months. The results of DPN exhibit excellent performance, which is competitive with the Global Positioning System (GPS) precise point positioning (PPP) technique in the short-term and consistent with the conventional TWSTFT in the long-term. Time deviations of less than 75 ps are achieved for averaging times from 1 s to 1 d. Moreover, the DPN data has less diurnal variation than that of the conventional TWSTFT. Because the DPN-based system has advantages of higher precision and lower bandwidth cost, it is one of the most promising methods to improve international time-transfer links.

Two classes of ethidium-bromide-resistant mutants of Streptomyces lividans 66.

Five spontaneous mutants of Streptomyces lividans TK64 resistant to 5 or 15 microM ethidium bromide (EB) were isolated, and the corresponding mutations were mapped to two different chromosomal locations. Both types of mutations conferred unselected resistance to several basic dyes and norfloxacin. The strain with the low-level resistance exhibited wild-type levels of EB uptake and energy-dependent efflux, and the resistance mechanism is unclear. The highly resistant mutants, which additionally were resistant to phosphonium ions, had a reduced accumulation and an increased efflux of EB, reminiscent of a mammalian multidrug resistance efflux pump.

Repressed multidrug resistance genes in Streptomyces lividans.

Multidrug resistance (MDR) systems are ubiquitously present in prokaryotes and eukaryotes and defend both types of organisms against toxic compounds in the environment. Four families of MDR systems have been described, each family removing a broad spectrum of compounds by a specific membrane-bound active efflux pump. In the present study, at least four MDR systems were identified genetically in the soil bacterium Streptomyces lividans. The resistance genes of three of these systems were cloned and sequenced. Two of them are accompanied by a repressor gene. These MDR gene sequences are found in most other Streptomyces species investigated. Unlike the constitutively expressed MDR genes in Escherichia coli and other gram-negative bacteria, all of the Streptomyces genes were repressed under laboratory conditions, and resistance arose by mutations in the repressor genes.