Highly Emissive and Robust Cd-Based MOF with an Unprecedented Topology for Tetracycline Sensing.

Herein, an unprecedented cadmium-based metal-organic framework (JNU-106) fabricated by utilizing pyrazole-functionalized tetraphenylethylene ligands (Py-TPE) and rod-shaped secondary building units is reported, possessing a new (3,3,3,6,6,8)-connected topological network. Thanks to the ingeniously designed intramolecular charge transfer behavior, which originates from the congruent coplanarity between Py and TPE, JNU-106 exhibits intense green luminescence with a quantum yield increased by 1.5 times. The phenomenon of remarkable fluorescence quenching of JNU-106 reveals that it possesses extremely high anti-interference performance, superior sensitivity, and dedicated selectivity toward tetracycline antibiotics (TCAs) in aqueous solutions, which are comparable to those of the state-of-the-art porous sensing compounds. Taking the theoretical calculations and experimental results into account, the luminescence quenching is mainly attributed to the internal filtration effect and the static quenching effect. Considering the portable and rapid performance of JNU-106-based testing strips for sensing TCAs, the fabricated JNU-106 provides an alternative for ecological monitoring and environmental governance.

Linker Engineering for Reactive Oxygen Species Generation Efficiency in Ultra-Stable Nickel-Based Metal-Organic Frameworks.

Interfacial charge transfer on the surface of heterogeneous photocatalysts dictates the efficiency of reactive oxygen species (ROS) generation and therefore the efficiency of aerobic oxidation reactions. Reticular chemistry in metal-organic frameworks (MOFs) allows for the rational design of donor-acceptor pairs to optimize interfacial charge-transfer kinetics. Herein, we report a series of isostructural fcu-topology Ni8-MOFs (termed JNU-212, JNU-213, JNU-214, and JNU-215) with linearly bridged bipyrazoles as organic linkers. These crystalline Ni8-MOFs can maintain their structural integrity in 7 M NaOH at 100 °C for 24 h. Experimental studies reveal that linker engineering by tuning the electron-accepting capacity of the pyrazole-bridging units renders these Ni8-MOFs with significantly improved charge separation and transfer efficiency under visible-light irradiation. Among them, the one containing a benzoselenadiazole unit (JNU-214) exhibits the best photocatalytic performance in the aerobic oxidation of benzylamines with a conversion rate of 99% in 24 h. Recycling experiments were carried out to confirm the stability and reusability of JNU-214 as a robust heterogeneous catalyst. Significantly, the systematic modulation of the electron-accepting capacity of the bridging units in donor-acceptor-donor MOFs provides a new pathway to develop viable noble-metal-free heterogeneous photocatalysts for aerobic oxidation reactions.

Homoleptic Al(III) Photosensitizers for Durable CO2 Photoreduction.

Exploiting noble-metal-free systems for high-performance photocatalytic CO2 reduction still presents a key challenge, partially due to the long-standing difficulties in developing potent and durable earth-abundant photosensitizers. Therefore, based on the very cheap aluminum metal, we have deployed a systematic series of homoleptic Al(III) photosensitizers featuring 2-pyridylpyrrolide ligands for CO2 photoreduction. The combined studies of steady-state and time-resolved spectroscopy as well as quantum chemical calculations demonstrate that in anerobic CH3CN solutions at room temperature, visible-light excitation of the Al(III) photosensitizers leads to an efficient population of singlet excited states with nanosecond-scale lifetimes and notable emission quantum yields (10-40%). The results of transient absorption spectroscopy further identified the presence of emissive singlet and unexpectedly nonemissive triplet excited states. More importantly, the introduction of methyl groups at the pyrrolide rings can greatly improve the visible-light absorption, reducing power, and durability of the Al(III) photosensitizers. With triethanolamine, BIH (1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole), and an Fe(II)-quaterpyridine catalyst, the most methylated Al(III) photosensitizer achieves an apparent quantum efficiency of 2.8% at 450 nm for selective (>99%) CO2-to-CO conversion, which is nearly 28 times that of the unmethylated one (0.1%) under identical conditions. The optimal system realizes a maximum turnover number of 10250 and higher robustness than the systems with Ru(II) and Cu(I) benchmark photosensitizers. Quenching experiments using fluorescence spectroscopy elucidate that the photoinduced electron transfer in the Al(III)-sensitized system follows a reductive quenching pathway. The remarkable tunability and cost efficiency of these Al(III) photosensitizers should allow them as promising components in noble-metal-free systems for solar fuel conversion.

Complexation of Fluorofenidone by Cucurbit[7]uril and ß-Cyclodextrin: Keto-Enol Tautomerization to Enhance the Solubility.

This study is designed to compare drug encapsulation by cucurbit[7]uril and ß-cyclodextrin, using fluorofenidone as a model drug. Single-crystal X-ray diffraction analysis was employed to successfully determine the crystal structures of fluorofenidone·H+@cucurbit[7]uril Form, fluorofenidone@cucurbit[7]uril Form, and fluorofenidone@ß-cyclodextrin Form. Keto-enol tautomerization of fluorofenidone mediated by cucurbit[7]uril in acid solution is confirmed by crystal structures, pH titration, and nuclear magnetic resonance experiments. However, ß-cyclodextrin cannot cause the keto-enol tautomerization of fluorofenidone under similar conditions. The phase solubility study demonstrates that cucurbit[7]uril has a much higher solubilization capacity for fluorofenidone than ß-cyclodextrin in 0.1 M HCl since the Kc values of fluorofenidone with cucurbit[7]uril and ß-cyclodextrin were 1223.97 ± 452.68 and 78.49 ± 10.56 M-1, respectively. Excellent solubility can be attributed to the keto-enol tautomerization of fluorofenidone under the conditions of cucurbit[7]uril in acid solution. The enol form of fluorofenidone is encapsulated by cucurbit[7]uril by hydrogen bonding interaction and hydrophobic interaction to increase binding affinity. Rat pharmacokinetic studies demonstrate that the area under the plasma concentration-time curve from time 0 to 7 h value of fluorofenidone@cucurbit[7]uril complex is 1.70-fold greater than that of free fluorofenidone, and the mean residence time from time 0 to 7 h is slightly prolonged from 1.29 to 1.76 h (P < 0.01) after oral administration. However, no significant difference is found between fluorofenidone and fluorofenidone@ß-cyclodextrin complex. This work indicates that the induction of keto-enol tautomerization of drugs using macrocyclic molecules has the potential to be an effective method to improve their solubility and bioavailability, providing valuable insights for the application of macrocyclic molecules in the biomedical field.

Pyrazine Functionalization in Eu-MOF for Exclusive Ratiometric Luminescence Sensing of PO43.

Single-emission luminescence sensors are less than satisfactory for complex systems due to their susceptibility to environmental disturbances. Lanthanum-based metal-organic frameworks (Ln-MOFs) with highly stable ratiometric dual-emission are regarded as promising luminescence probes owing to their fascinating ligand-to-metal energy transfer behaviors (also known as the antenna effect). Herein, we report the synthesis of a pair of isostructural europium-based MOFs (termed JNU-219 and JNU-220) by utilizing two X-shaped tetracarboxylate linkers, 4,4',4″,4‴-benzene-2,3,5,6-tetrayl-tetrabenzoate (BTEB) and 4,4',4″,4‴-pyrazine-2,3,5,6-tetrayl-tetrabenzoate (BTTB). Both JNU-219 and JNU-220 present the characteristic red luminescence of Eu3+, yet the pyrazine functionalization of the BTTB linker renders JNU-220 with significantly increased luminescence emission, almost 30 times that of JNU-219. As a result, the detection limit of JNU-220 for the ratiometric luminescence sensing of PO43- was determined to be as low as 0.22 µM, which is far superior to those of other reported MOF materials. Additionally, we demonstrate the excellent stability and reusability of JNU-220, further verifying its potential as a robust ratiometric luminescence probe.

An Atomically Precise Pyrazolate-Protected Copper Nanocluster Exhibiting Exceptional Stability and Catalytic Activity.

The synthesis of atomically precise copper nanoclusters (Cu-NCs) with high chemical stability is a prerequisite for practical applications, yet still remains a long-standing challenge. Herein, we have prepared a pyrazolate-protected Cu-NC (Cu8), which exhibited exceptional chemical stability either in solid-state or in solution. The crystals of Cu8 are still suitable for single crystal X-ray diffraction analysis even after being treated with boiling water, 8 wt % H2 O2 , high concentrated acid (1 M HCl) or saturated base (≈20 M KOH), respectively. More importantly, the structure of Cu8 in solution also remained intact toward oxygen, organic acid (100 eq. HOAc) or base (400 eq. dibutylamine) confirmed by 1 H NMR and UV/Vis analysis. Taking advantage of high alkali-resistant, Cu8 illustrates excellent catalytic activity for the synthesis of indolizines, and it can be reused for at least 10 cycles without losing catalytic performance.

Achiral Au(I) Cyclic Trinuclear Complexes with High-Efficiency Circularly Polarized Near-Infrared TADF.

Realizing high photoluminescence quantum yield (PLQY) in the near-infrared (NIR) region is challenging and valuable for luminescent material, especially for thermally activated delay fluorescence (TADF) material. In this work, we report two achiral cyclic trinuclear Au(I) complexes, Au3 (4-Clpyrazolate)3 and Au3 (4-Brpyrazolate)3 (denoted as Cl-Au and Br-Au), obtained through the reaction of 4-chloro-1H-pyrazole and 4-bromo-1H-pyrazole with Au(I) salts, respectively. Both Cl-Au and Br-Au exhibit TADF with high PLQY (>70 %) in the NIR I (700-900 nm) (λmax = 720 nm) region, exceeding other NIR-TADF emitters in the solid state. Photophysical experiments and theoretical calculations confirmed the efficient NIR-TADF properties of Cl-Au and Br-Au were attributed to the small energy gap ΔE(S1-T2) (S = singlet, T = triplet) and the large spin-orbital coupling induced by ligand-to-metal-metal charge transfer of molecular aggregations. In addition, both complexes crystallize in the achiral Pna21 space group (mm2 point group) and are circularly polarized light (CPL) active with maxima luminescent dissymmetry factor |glum | of 3.4 × 10-3 (Cl-Au) and 2.7 × 10-3 (Br-Au) for their crystalline powder samples, respectively. By using Cl-Au as the emitting ink, 3D-printed luminescent logos are fabricated, which own anti-counterfeiting functions due to its CPL behavior dependent on the crystallinity.

Phosphine-Triggered Structural Defects in Au44 Homologues Boost Electrocatalytic CO2 Reduction.

The systematic induction of structural defects at the atomic level is crucial to metal nanocluster research because it endows cluster-based catalysts with highly reactive centers and allows for a comprehensive investigation of viable reaction pathways. Herein, by substituting neutral phosphine ligands for surface anionic thiolate ligands, we establish that one or two Au3 triangular units can be successfully introduced into the double-stranded helical kernel of Au44 (TBBT)28 , where TBBT=4-tert-butylbenzenethiolate, resulting in the formation of two atomically precise defective Au44 nanoclusters. Along with the regular face-centered-cubic (fcc) nanocluster, the first series of mixed-ligand cluster homologues is identified, with a unified formula of Au44 (PPh3 )n (TBBT)28-2n (n=0-2). The Au44 (PPh3 )(TBBT)26 nanocluster having major structural defects at the bottom of the fcc lattice demonstrates superior electrocatalytic performance in the CO2 reduction to CO. Density functional theory calculations indicate that the active site near the defects significantly lowers the free energy for the *COOH formation, the rate-determining step in the whole catalytic process.

Mixed-Linker Isoreticular Zn(II) Metal-Organic Frameworks as Brønsted Acid-Base Bifunctional Catalysts for Knoevenagel Condensation Reactions.

Multicomponent metal-organic frameworks (MOFs) have received an increasing amount of attention due to their potential to produce new topologies, pore metrics, and functionalities compared to MOFs with a single metal cluster and one organic linker. Herein, five isoreticular Zn MOFs were obtained by mixing two types of linear ditopic linkers in a one-pot solvothermal synthesis. Interestingly, in the resulting Zn MOFs a six-connected cyclic trinuclear Zn(II) cluster and an eight-connected linear trinuclear Zn(II) cluster coexist, leading to an uncommon (6,8)-connected network. Catalytic activities toward the solvent-free Knoevenagel reactions were observed for all of these MOFs. Further experimental and computational studies suggest that they are Brønsted acid-base bifunctional catalysts. Through chemical modifications of dicarboxylate ligands, including their aromatic backbones and substituents, we have successfully implemented reticular chemistry for the modulations of pore sizes, surface areas, and catalytic performances in a series of four-component isoreticular MOFs.

Cyclic Trinuclear Copper(I) Complex Exhibiting Aggregation-Induced Emission: A Novel Fluorescent Probe for the Selective Detection of Gold(III) Ions.

Coordination complexes with aggregation-induced-emission (AIE) behavior has drawn much attention because of their promising applications. Conventionally, the AIE-active metal-organic complexes are prepared from an AIE-active organic ligand, and the construction of such coordination complexes from aggregation-caused-quenching (ACQ) ligands is still challenging. Herein, we have synthesized two new cyclic trinuclear complexes (CTCs), namely, 1 and 2, from copper(I) and silver(I) and a ACQ ligand [4-(3,5-dimethyl-1H-pyrazol-4-yl)benzaldehyde, HL]. (1) exhibited AIE behavior, and the emission intensity is enhanced ∼20 times when it aggregates, which can be attributed to its tight packing and multiple intermolecular hydrogen bonds that restrained the intramolecular rotation, as confirmed by single-crystal X-ray diffraction analysis. On the other hand, (2) displayed ACQ effects, and the emission intensity is decreased ∼5 times when it aggregates. This ACQ behavior of 2 is related to its loose packing and free rotation of the ligand in crystals, resulting in nonradiative decay and fluorescence quenching. Interestingly, the CTCs 1 and 2 both exhibited a good affinity to gold(III) ions, allowing selective detection and sensing of gold ions. More importantly, the 2 shows a good limit of detection (3.28 µmol/L) and an ultrafast responsive time (∼2 s). Our studies pave a new route to designing novel AIE-active coordination complexes and further exploring the functionality of CTCs.

Building a Pyrazole-Benzothiadiazole-Pyrazole Photosensitizer into Metal-Organic Frameworks for Photocatalytic Aerobic Oxidation.

Charge separation plays a crucial role in regulating photochemical properties and therefore warrants consideration in designing photocatalysts. Metal-organic frameworks (MOFs) are emerging as promising candidates for heterogeneous photocatalysis due to their structural designability and tunability of photon absorption. Herein, we report the design of a pyrazole-benzothiadiazole-pyrazole organic molecule bearing a donor-acceptor-donor conjugated π-system for fast charge separation. Further attempts to integrate such a photosensitizer into MOFs afford a more effective heterogeneous photocatalyst (JNU-204). Under visible-light irradiation, three aerobic oxidation reactions involving different oxygenation pathways were achieved on JNU-204. Recycling experiments were conducted to demonstrate the stability and reusability of JNU-204 as a robust heterogeneous photocatalyst. Furthermore, we illustrate its applications in the facile synthesis of pyrrolo[2,1-a]isoquinoline-containing heterocycles, core skeletons of a family of marine natural products. JNU-204 is an exemplary MOF platform with good photon absorption, suitable band gap, fast charge separation, and extraordinary chemical stability for proceeding with aerobic oxidation reactions under visible-light irradiation.

Chiral 3D Coordination Polymers Consisting of Achiral Terpyridyl Precursors: from Spontaneous Resolution to Enantioenriched Induction.

A pair of enantiomers of three-dimensional (3D) chiral coordination polymers (CCPs) were successfully constructed by using achiral components 4,2':6',4''-terpyridyl precursors and Cu2+ through spontaneous resolution (1 a). By utilising feeding controlled chiral-templated induction and chiral auxiliary behaviour of optically pure camphor sulfonate (CSA), the enantioenriched (1 b-P and 1 b-M) and CSA captured (1 c-P and 1 c-M) CCPs were successfully synthesised, respectively. The chiral information of the corresponding products was confirmed by X-ray single crystal diffraction and solid-state CD spectra. Meanwhile, the formation processes of 1 b-P and 1 b-M were monitored through solution CD spectra, UV/Vis spectra and ESI-TOF MS. Based on these results, a reasonable chiral-templated induction mechanism of forming 1 b-P and 1 b-M was proposed.

Cage-Interconnected Metal-Organic Framework with Tailored Apertures for Efficient C2H6/C2H4 Separation under Humid Conditions.

Metal-organic frameworks (MOFs) with open metal sites (OMSs) have been shown to preferentially adsorb unsaturated hydrocarbons such as C2H4 due to the formation of π-complexation. However, the adsorption capacity and selectivity might well be dampened under humid conditions because OMSs could be easily poisoned in the presence of water vapor. C2H6-selective adsorbents with less hydrophilic environments, on the other hand, not only could effectively minimize the impact of humidity on separation capacity but also could directly produce high-purity C2H4 from C2H6/C2H4 mixtures. Here, we report a C2H6-selective MOF (JNU-2) underlying a rare xae topology. Its cage-like cavities are interconnected through apertures with a limiting diameter of ca. 3.7 Å, which is in the domain of kinetic diameters of C2H4 and C2H6 molecules. Molecular modeling studies suggest the four oxygen atoms on aperture are poised to preferentially interact with C2H6 through multiple C-H···O hydrogen bonding, rendering JNU-2 an enhanced C2H6 selectivity. Indeed, experimental results reveal that JNU-2 not only takes up a great amount of C2H6 comparable to other top-performing C2H6-selective MOFs but also displays excellent separation capacity even under humid conditions; moreover, it can be easily regenerated at room temperature owing to its moderate adsorption enthalpy. This work successfully demonstrated a strategy of balancing adsorption capacity and selectivity for C2H6 by designing MOF materials with cavities interconnected through tailored apertures. The apertures function as screening sites for C2H6 selectivity, while the internal cavities provide space for large adsorption.

Exclusive Recognition of Acetone in a Luminescent BioMOF through Multiple Hydrogen-Bonding Interactions.

An anionic microporous metal-organic framework (1), featuring a combination of mononuclear and tetranuclear zinc clusters and a mix-and-match strategy of two different types of organic ligands, has been successfully constructed via a solvothermal reaction. Its luminescence can be exclusively quenched by acetone. In situ single-crystal X-ray diffraction studies reveal the specific acetone binding sites and the existence of multiple hydrogen bonds between acetone and the framework. Together with its chemical and thermal stability, 1 has been demonstrated to be a potential luminescence probe for the rapid detection of acetone with a remarkable anti-interference and a low detection limit (1.85 ppm).

Induced Fit of C2 H2 in a Flexible MOF Through Cooperative Action of Open Metal Sites.

Porous materials that can undergo pore-structure adjustment to better accommodate specific molecules are ideal for separation and purification. Here, we report a stable microporous metal-organic framework, JNU-1, featuring one-dimensional diamond-shaped channels with a high density of open metal sites arranged on the surface for the cooperative binding of acetylene. Together with its framework flexibility and appropriate pore geometry, JNU-1 exhibits an induced-fit behavior for acetylene. The specific binding sites and continuous framework adaptation upon increased acetylene pressure are validated by molecular modeling and in situ X-ray diffraction study. This unique induced-fit behavior endows JNU-1 with an unprecedented increase in the acetylene binding affinity (adsorption enthalpy: up to 47.6 kJ mol-1 at ca. 2.0 mmol g-1 loading).

Two Li-Zn Cluster-Based Metal-Organic Frameworks: Strong H2/CO2 Binding and High Selectivity to CO2.

Two metal-organic frameworks (MOFs) {(Me2NH2)[ZnLi(PTCA)(H2O)]}n·n{3DMF·C4H8O2·4H2O} (1) and {(Me2NH2)[ZnLi(PTCA)]}n·n{3DMF·5H2O} (2) have been constructed from Li-Zn clusters and pyrene-1,3,6,8-tetracarboxylic acid (H4PTCA) under solvothermal conditions. Gas sorption measurements have revealed that the pore of desolvated 2 (2d) can strongly interact with H2 and CO2, with high H2 and CO2 adsorption heats of 15.3 and 51.9 kJ/mol, respectively. Furthermore, 2d can selectively adsorb CO2 over N2 and CH4, with high adsorption selectivity of CO2/N2 and CO2/CH4.

A luminescent microporous metal-organic framework with highly selective CO2 adsorption and sensing of nitro explosives.

A luminescent microporous metal-organic framework based on a π-electron-rich tricarboxylate ligand and an In(3+) ion has been solvothermally obtained and characterized and exhibits highly selective CO2 adsorption over CH4 and N2 gases and selective sensing of the nitro explosive 2,4,6-trinitrophenol.

Bioactivities and serum pharmacochemistry of Qi-Wei-Xiao-Yan-Tang.

CONTEXT: Qi-Wei-Xiao-Yan-Tang (XYT), composed of Radix et Rhizoma Rhei, Radix Astragali, Radix Wikstroemiae Indicae, Fructus Ligustri Lucidi, Poria and Radix Glycyrrhizae, has been widely used as an anti-inflammatory drug. OBJECTIVE: The present study investigated the anti-inflammatory, antibacterial effects and serum pharmacochemistry of XYT. METHODS: The dimethylbenzene-induced inflammation test, the acetic acid-induced vascular permeability test and the carrageenan-induced paw edema test were used to evaluate the anti-inflammatory activity of XYT (200, 100 and 50 mg/kg); minimal inhibitory concentration (MIC). Minimal bactericidal concentration (MBC) tests were used to evaluate the antibacterial activity of XYT. Additionally, serum pharmacochemistry was performed to study the biologically active substances. RESULTS: All the tests for anti-inflammatory effects were shown active with these test systems; the anti-inflammatory effects at doses of 100 and 200 mg/kg were significant (p < 0.05); MIC and MBC tests indicated that XYT showed a broader antimicrobial spectrum and stronger toxicity to the tested microbes. Additionally, calycosin-7-glucoside, sennoside A, aloeemodin and rhein were detected as the predominant components in rat serum which may play the key role in the anti-inflammatory activities of XYT. CONCLUSIONS: This is the first report of the pharmacological activities and serum pharmacochemistry of XYT, and the first evidence of anti-inflammatory and antimicrobial properties of the extracts of XYT. The results of our work demonstrated that XYT has significant anti-inflammatory and antibacterial properties, and calycosin-7-glucoside, sennoside A aloeemodin and rhein may be the biologically active substances of XYT. XYT can be utilized as an effective and safe disease preventive or therapeutic agent.

Cytotoxic cis-ruthenium(III) bis(amidine) complexes.

In chemotherapy, the search for ruthenium compounds as alternatives to platinum compounds is proposed because of their unique properties. However, the geometry effect of ruthenium complexes is sparely investigated. In this paper, we report the synthesis of a series of bis(acetylacetonato)ruthenium(III) complexes bearing two amidines (1-) in a cis configuration. These complexes are highly cytotoxic against various cancer cell lines, including a cisplatin-resistant cell line. In vitro studies suggested that the representative complex can induce cell cycle G0/G1 phase arrest, decrease the mitochondrial membrane potential, elevate the intracellular reactive oxygen species level, and cause DNA damage and caspase-mediated mitochondrial pathway apoptosis in NCI-H460 cells. In vivo, it can effectively inhibit tumor xenograft growth in nude mouse models with no body weight loss. In combination with the reported trans-bis(amidine)ruthenium(III) complexes, we found that ruthenium(III) bis(amidine) complexes could be cytotoxic in both trans and cis geometries, which is in contrast to platinum-based compounds.

Building a cobaloxime-based metal-organic framework for photocatalytic aerobic oxidation of arylboronic acids to phenols.

Herein, the design and synthesis of an unprecedented cobaloxime-based zirconium metal-organic framework (Zr-TCPCo) with an she net is reported. This heterogeneous material as a photocatalyst exhibits excellent catalytic activity for aerobic oxidation of arylboronic acids to phenols. Recycling experiments demonstrate the stability and reusability of Zr-TCPCo as a robust catalyst.