Engineering the Core-Shell-Structured NCNTs-Ni2Si@Porous Si Composite with Robust Ni-Si Interfacial Bonding for High-Performance Li-Ion Batteries.

A new strategy has been innovatively proposed for wrapping the Ni-incorporated and N-doped carbon nanotube arrays (Ni-NCNTs) on porous Si with robust Ni-Si interfacial bonding to form the core-shell-structured NCNTs-Ni2Si@Si. The hierarchical porous silicon core was first fabricated via a novel self-templating synthesis route based on two crucial strategies: in situ thermal evaporation of crystal water from the perlite for producing porous SiO2 and subsequent magnesiothermic reduction of porous SiO2 into porous Si. Ni-NCNTs were subsequently constructed based on the Ni-catalyzed tip-growth mechanism and were further engineered to fully wrap the porous Si microparticles by forming the Ni2Si alloy at the heterojunction interface. When the prepared NCNTs-Ni2Si@Si was evaluated as the anode material for Li-ion batteries, the hierarchical porous system in the Si core and the rich void spaces in carbon nanotube arrays contributed to the remarkable accommodation of volume expansion of Si as well as the significant increase of Li+ diffusion and Si utilization. Moreover, the Ni2Si alloy, which chemically linked the Ni-NCNTs and porous Si, not only provided good electronic contact between the Si core and carbon shell but also effectively prevented the CNTs' detachment from the Si core during cycling. The multifunctional structural design rendered the whole electrode highly stable and active in Li storage, and the electrochemically active NCNTs-Ni2Si@Si electrode delivered a high reversible capacity of 1547 mAh g-1 and excellent cycling stability (85% capacity retention after 600 discharge-charge cycles) at a current density of 358 mA g-1 (0.1 C) as well as good rate performance (778 mAh g-1 at 2 C), showing great potential as an efficient and stable anode for high energy density Li-ion batteries.

Effects of Brown Fishmeal on Growth Performance, Digestibility, and Lipid Metabolism of the Chinese Soft-Shelled Turtle (Pelodiscus sinensis).

The aim of this study was to evaluate the effect of brown fishmeal in replacement of white fishmeal in the diet of Chinese soft-shelled turtles and to find the optimal amount of brown fishmeal to add. Five experimental groups were set up and fed to animals, and they were composed by different proportions of white and brown fishmeal: G1 (30% white and 25% brown fishmeal), G2 (25% white and 30% brown fishmeal), G3 (20% white and 35% brown fishmeal), G4 (15% white and 40% brown fishmeal), G5 (10% white and 45% brown fishmeal). G1 is regarded as the control group. Turtles were randomly divided into five experimental groups with four replicates each. The experiment lasted 72 days. The results showed that the WGR, SGR, FCR, and HSI of the G3 group were not significantly different from those of the control group (P > 0.05). In addition, brown fishmeal can increase the crude protein content in the muscles of them. Among the serum biochemical indices, there was no significant difference between the G3 group and the G1 group, except for the level of TG (P > 0.05). Meanwhile, the activities of AST, ALT, and CAT in the liver of the G3 group did not differ significantly from those of the G1 group (P > 0.05). However, the activities of ACP, AKP, and T-AOC were significantly decreased in the G3 group (P < 0.05). In addition, the alteration of fishmeal did not affect the digestive enzyme activities in the stomach, liver, and intestine, and there is no significant difference (P > 0.05). Importantly, with increasing brown fishmeal addition, the expression of Fas, Pparγ, Scd, and Stat3 showed a significant increase, while the expression of Bmp4 decreased significantly (P < 0.05). In this study, the addition of 20% white fishmeal and 35% brown fishmeal to the diet of Chinese soft-shelled turtles did not adversely affect growth performance. Therefore, 20% white fishmeal and 35% brown fishmeal are the most practical feed formulations for Chinese soft-shelled turtles in this study.

Enhanced Synergetic Catalytic Effect of Mo2C/NCNTs@Co Heterostructures in Dye-Sensitized Solar Cells: Fine-Tuned Energy Level Alignment and Efficient Charge Transfer Behavior.

A highly efficient and stable electrocatalyst with the novel heterostructure of Co-embedded and N-doped carbon nanotubes supported Mo2C nanoparticles (Mo2C/NCNTs@Co) is creatively constructed by adopting the one-step metal catalyzed carbonization-nitridation strategy. Systematic characterizations and density functional theory (DFT) calculations reveal the advanced structural and electronic properties of Mo2C/NCNTs@Co heterostructure, in which the Co-embedded and N-doped CNTs with tunable diameters present electron-donating effect and the work function is correspondingly regulated from 4.91 to 4.52 eV, and the size-controlled Mo2C nanoparticles exhibit Pt-like 4d electronic structure and the well matched work function (4.85 eV) with I-/I3- redox couples (4.90 eV). As a result, the conductive NCNTs@Co substrate with fine-tuned energy level alignment accelerates the electron transportation and the electron migration from NCNTs@Co to Mo2C, and the active Mo2C shows high affinity for I3- adsorption and high charge transfer ability for I3- reduction, which reach a decent synergetic catalytic effect in Mo2C/NCNTs@Co heterostructure. The DSSC with Mo2C/NCNTs@Co CE achieves a high photoelectric conversion efficiency of 8.82% and exceptional electrochemical stability with a residual efficiency of 7.95% after continuous illumination of 200 h, better than Pt-based cell. Moreover, the synergistic catalytic mechanism toward I3- reduction is comprehensively studied on the basis of structure-activity correlation and DFT calculations. The advanced heterostructure engineering and electronic modulation provide a new design principle to develop the efficient, stable, and economic hybrid catalysts in relevant electrocatalytic fields.

Strategic Design of Vacancy-Enriched Fe1- xS Nanoparticles Anchored on Fe3C-Encapsulated and N-Doped Carbon Nanotube Hybrids for High-Efficiency Triiodide Reduction in Dye-Sensitized Solar Cells.

A new class of hybrids with the unique electrocatalytic nanoarchitecture of Fe1- xS anchored on Fe3C-encapsulated and N-doped carbon nanotubes (Fe1- xS/Fe3C-NCNTs) is innovatively synthesized through a facile one-step carbonization-sulfurization strategy. The efficient synthetic protocols on phase structure evolution and dynamic decomposition behavior enable the production of the Fe1- xS/Fe3C-NCNT hybrid with advanced structural and electronic properties, in which the Fe vacancy-contained Fe1- xS showed the 3d metallic state electrons and an electroactive Fe in +2/+3 valence, and the electronic structure of the CNT was effectively modulated by the incorporated Fe3C and N, with the work function decreased from 4.85 to 4.63 eV. The meticulous structural, electronic, and compositional control unveils the unusual synergetic catalytic properties for the Fe1- xS/Fe3C-NCNT hybrid when developed as counter electrodes (CEs) for dye-sensitized solar cells (DSSCs), in which the Fe3C- and N-incorporated CNTs with reduced work function and increased charge density provide a highway for electron transport and facilitate the electron migration from Fe3C-NCNTs to ultrahigh active Fe1- xS with the electron-donating effect, and the Fe vacancy-enriched Fe1- xS nanoparticles exhibit ultrahigh I3- adsorption and charge-transfer ability. As a consequence, the DSSC based on the Fe1- xS/Fe3C-NCNT CE delivers a high power conversion efficiency of 8.67% and good long-term stability with a remnant efficiency of 8.00% after 168 h of illumination, superior to those of traditional Pt. Furthermore, the possible catalytic mechanism toward I3- reduction is creatively proposed based on the structure-activity correlation. In this work, the structure engineering, electronic modulation, and composition control opens up new possibilities in constructing the novel electrocatalytic nanoarchitecture for highly efficient CEs in DSSCs.

General Strategy for Controlled Synthesis of NixPy/Carbon and Its Evaluation as a Counter Electrode Material in Dye-Sensitized Solar Cells.

Hydrothermal treatment of nickel acetate and phosphoric acid aqueous solution followed with a carbothermal reduction assisted phosphorization process using sucrose as the carbon source for the controlled synthesis of NixPy/C was successfully realized for the first time. The critical synthesis factors, including reduction temperature, phosphorus/nickel ratio, pH, and sucrose amount were systematically investigated. Remarkably, the carbon serves as a reducer and plays a determinative role in the transformation of Ni2P2O7 into Ni2P/C. The synthesis strategy is divided into four distinguishable stages: (1) hydrothermal preparation of Ni3(PO4)2·8H2O precursor for stabilizing P sources; (2) dimerization of Ni3(PO4)2·8H2O into more thermal stable Ni2P2O7 amorphous phase along with the generation of NiO; (3) carbothermal reduction and phosphidation of NiO into NixPy (0 ≤ y/x ≤ 0.5); and (4) further phosphidation of mixed-phase NixPy and carbothermal reduction of Ni2P2O7 into single-phase Ni2P. The resultant Ni2P, the highly active phase in electrocatalysis, was applied as counter electrode in a dye-sensitized solar cell (DSSC). The DSSC based on Ni2P with 10.4 wt.% carbon delivers a power conversion efficiency of 9.57%, superior to that of state-of-the-art Pt-based cell (8.12%). The abundant Niδ+ and Pδ- active sites and the metal-like conductivity account for its outstanding catalytic performance.

Construction of Highly Catalytic Porous TiOPC Nanocomposite Counter Electrodes for Dye-Sensitized Solar Cells.

Developing low-cost, durable, and highly catalytic counter electrode (CE) materials based on earth-abundant elements is essential for dye-sensitized solar cells (DSSCs). In this study, we report a highly active nanostructured compositional material, TiOPC, which contains titanium, oxygen, phosphorus, and carbon, for efficient CE in I3-/I- electrolyte. The TiOPC nanocomposites are prepared from carbon thermal transformation of TiP2O7 in an atmosphere of nitrogen at high temperature, and their catalytic performance is regulated by changing the carbon content in the nanocomposites. The TiOPC with appropriate 24.6 wt % carbon and porous structure exhibits an enhanced electrocatalytic activity in the reduction of I3-, providing a short-circuit current density of 16.64 mA cm-2, an open-circuit potential of 0.78 V, and an energy conversion efficiency of 8.65%. The photovoltaic performance of TiOPC CE-based DSSC is even superior to that of a Pt CE-based cell (13.80 mA cm-2, 0.79 V, and 6.66%). The enhanced catalytic activity of TiOPC is attributed to the presence of predominant Ti-O-P-C structure along with the continuous conductive carbon network and the porous structure.