Second harmonic generation in plasmonic metasurfaces enhanced by symmetry-protected dual bound states in the continuum.

We numerically investigate linear and nonlinear optical responses in metasurfaces consisting of Au double-gap split ring resonators (DSRRs). Symmetry-protected dual bound states in the continuum (BICs) in such plasmonic metasurfaces are observed at the near-infrared optical regime. Efficient second harmonic generation (SHG) is obtained at the quasi-BIC models due to the symmetry broken. The optimized SHG responses are obtained at the critical couplings between radiation and nonradiation processes at the linearly x- and y-polarized light, respectively. High conversion efficiency of SHG of a value 10-6 is arrived at the fundamental intensity of 10 GW/cm2 at the quasi-BIC wavelength under the y-polarized illumination. Large extrinsic and tunable chirality of linear and nonlinear optical responses empowered by quasi-BICs is acquired in asymmetry metasurfaces at oblique circularly polarized incidence. The results indicate that the plasmonic metasurfaces of symmetry-protected BICs at the near-infrared optical regime have great potential applications in the on-chip efficient frequency conversion, and the linear and nonlinear chiral manipulation.

Electromagnetic origin of femtosecond laser-induced periodic surface structures on GaP crystals.

The formations of different types of laser-induced periodic surface structures (LIPSS) on the surface of GaP crystals with different laser fluence are researched in experiments. The transition from the high spatial frequency LIPSS (HSFL) to the low spatial frequency LIPSS (LSFL) occurred as the number of the irradiated laser pulse increased. The finite difference time domain method combined with the holographic ablation model is used to simulate the LIPSS formation under the irradiation of multiple pulses. Different types of ripples are predicted by the electromagnetic approach. Results demonstrate that the electromagnetic origins of HSFL and LSFL are due to the interference of incident field and the scattering field under the multi-pulse irradiation.

Evolution of optical harmonic generation near bound-states in the continuum in hybrid plasmonic-photonic structures.

We investigate the nonlinear optical harmonic generation behaviors near the bound-states in the continuum (BICs) in hybrid plasmonic-photonic structures. The hybrid structures are designed to consist of a plasmonic grating covered with a nonlinear dielectric waveguide layer, which support two distinct groups of BICs, i.e. the symmetry-protected BICs and Friedrich-Wintgen BICs. The evolution of second- and third-harmonic generation (SHG and THG) near the two groups of BICs was studied. The high dependence of nonlinear response on the local field distribution and tensor components of susceptibility of nonlinear materials was determined. Especially, there exists optimized angles of incidence for efficient SHG and THG response due to the interaction of photonic and plasmonic modes. The results are important to understand the nonlinear response behaviors in hybrid plasmonic-photonic structures and to design the nonlinear photonic devices.

Highly-sensitive sensor based on toroidal dipole governed by bound state in the continuum in dielectric non-coaxial core-shell cylinder.

The electromagnetic fields distributed on the surface region of the nanostructure is very important to improve the performance of the sensor. Here, we proposed a highly sensitive sensor based on toroidal dipole (TD) governed by bound state in the continuum (BIC) in all-dielectric metasurface consisting of single non-coaxial core-shell cylinder nanostructure array. The excitation of TD resonance in a single nanostructure is still challenging. The designed nanostructure not only supports TD resonance in a single nanostructure but also has very high Q-factor. More importantly, its electric field distributes at the surface of outer cylinder-shell, which is very suitable for biosensing. To evaluate the sensing performance of our proposed structure, we investigated the sensitivity and the figure of merit (FOM) of nanostructure with different structural parameters. Maximum sensitivity and FOM can reach up to 342 nm/RIU and 1295 when the asymmetric parameter d =10 nm. These results are of great significance to the research of TD resonance and the development of ultrasensitive sensor.

Ultralow-level all-optical self-switching in a nanostructured moiré superlattice.

We report an all-optical self-switching performed at an ultralow-level of intensity in a nanostructured moiré superlattice on a silicon platform. The moiré superlattice was formed by twisting two sets of triangular lattices in a silicon membrane in the same layer with a twist angle of 9.43°. The near flatband was formed, and the electric field was well confined in the center of the superlattice, which enabled all-optical switching under an ultralow intensity when the Kerr nonlinearity of silicon was considered. The intensity, which was reduced to 300 W/m2 and even 20 W/m2, can cause the transmittance of the nanostructure to change from 0 to 80% under x- and y-polarized pump light, respectively, and could be further decreased by optimizing the nanostructure or nonlinear materials. The results indicate that moiré superlattices fabricated from nonlinear materials are promising for integrated all-optical devices.

The full-length genome sequence of a novel amalgavirus in Lilium spp. in China.

We report for the first time the complete genome sequence of a novel amalgavirus, tentatively designated as 'lily amalgavirus 1' (LAV-1), isolated from Lilium spp. in China. LAV-1 is a 3448-nt double-stranded RNA virus that encodes two putative proteins. Open reading frame 1 (ORF1) encodes a 394-aa protein with unknown function. ORF2 encodes a putative RNA-dependent RNA polymerase (RdRp) of 895 aa. The two ORFs putatively encode a '1 + 2' fusion protein generated by a '+1' programmed ribosomal frameshift (PRF). BLASTp analysis revealed that the complete genome sequence of LAV-1 shares 48.23-59.80% sequence identity (query sequence coverage > 77%) with those of members of the genus Amalgavirus, with the highest nucleotide sequence identity of 59.80% with that of Allium cepa amalgavirus 1 (query sequence coverage, 87%). The genome structure, phylogenetic relationships, and sequence similarities to other plant amalgaviruses suggest that LAV-1 is a new member of the genus Amalgavirus.

Determination of Ultra-Trace Cobalt in Water Samples Using Dispersive Liquid-Liquid Microextraction Followed by Graphite Furnace Atomic Absorption Spectrometry.

A novel method for the determination of ultra-trace cobalt by dispersive liquid-liquid microextraction (DLLME) coupled with graphite furnace atomic absorption spectrometry has been developed. It is based on the color reaction of Co2+ with 2-(5-bromo-2-pyridylazo)-5-dimethylaminoaniline (5-Br-PADMA) in a Britton-Robinson buffer solution at pH 6.0 to form stable hydrophobic chelates, which were separated and enriched by DLLME with 1,2-dichloroethane (CH2ClCH2Cl) as extraction and acetonitrile (CH3CN) as a dispersive solvent. The sedimented phase containing the chelates is then determined with GFAAS. Parameters that affect extraction efficiency, such as types and volumes of extraction and disperser solvents, pH of sample solution, extraction time, concentration of the chelating agent 5-Br-PADMA, and salt effect, were investigated. Under optimal conditions, the calibration graph was linear over the range 0.05-1.0 ng/mL, with a correlation coefficient of 0.9922 and a detection limit of 0.03 ng/mL. Preconcentration factor (PF) is calculated as the ratio of the aqueous solution volume (5 mL) to that of the organic phase volume (40 µL), and enrichment factor (EF) is calculated as the ratio of the slopes of the calibration graphs obtained with and without DLLME for 5.0 mL of sample solution, which were 120 and 112.5, respectively. The extraction efficiency, calculated by EF/PF·100, was 93.8%. The relative standard deviation (RSD) at the 0.5 ng/mL Co2+ level was 3.8% (n = 6). The method has been applied to the determination of trace cobalt in water samples with satisfactory results.

Low-threshold and controllable nanolaser based on quasi-BIC supported by an all-dielectric eccentric nanoring structure.

High-Q factor can enhance the interaction between light and matter, which is an important parameter to decrease the threshold of nanolasers. Here, we theoretically propose an eccentric nanoring structure with a high and controllable Q factor to realize a low-threshold and controllable nanolaser by amplifying the quasi-bound states in the continuum (quasi-BIC). The designed nanostructure supports a quasi-BIC because of the symmetry protection-breaking of the nanostructure. The quasi-BIC has a very high Q factor of about 9.6×104 and can also be adjusted by changing structural parameters. We use the energy level diagram of the four-level two-electron system to study the lasing action of the eccentric nanoring structure. The results show that the nanolaser has a relatively low threshold of about 6.46 µJ/cm2. Furthermore, the lasing behavior can be tuned by controlling the structural parameters of the eccentric circular ring structure.

Ultimate conversion efficiency of second harmonic generation in all-dielectric resonators of quasi-BICs in consideration of nonlinear refraction of dielectrics.

We investigate second harmonic generation (SHG) in all-dielectric resonance nanostructures of high-Q factors assisted by quasi-bound states in the continuum (quasi-BICs). The typical resonators, e.g., guided-mode resonance gratings and asymmetric metasurfaces, fabricated by AlGaAs were numerically studied with the consideration of nonlinear refraction of AlGaAs. The resonance peak and line-shape of linear transmission and SHG spectra in the resonators can be dramatically changed under intense pump intensities. The SHG conversion efficiency in the nanostructures working at quasi-BICs is much lower than the traditionally expected values without considering the nonlinear refraction of dielectrics. The ultimate SHG conversion efficiency is finally obtained. The investigation has the significance for the design and understanding of efficient nonlinear metasurfaces of high-Q factors.

Bistability of optical harmonic generation in monolayer graphene plasmonics.

We report the bistability of second- and third-harmonic generation in monolayer graphene plasmonics supported by graphene nanoribbon arrays. The nonlinear optical bistability of harmonic generation at the ultra-low threshold intensity ∼100kW/cm2, along with the traditional linear optical bistability of transmittance, is observed due to the different local fundamental fields at the lower and higher state when the Kerr effect of graphene is considered. Importantly, the working fundamental wavelength can be tuned by the Fermi level of graphene and geometrical structure, which leads to the linear and nonlinear optical bistability available in a broadband for potential applications in advanced all-optical devices.

Improvement in outpatient services using the WeChat calling system in the Shanghai Children's Hospital.

OBJECTIVES: We explored the utility of WeChat applet as part of the Outpatient Department (OPD) to provide patients with timely queuing information and compared it with the traditional calling system. METHODS: Data for the WeChat calling system was extracted for the period of May 2018 to September 2018. Data for the traditional system was extracted for the same period from the year 2017. We compared the effective patient waiting time and nurse idle time i.e. nonproductive time spent on factors outside of employees' control with the two systems. We also analyzed the relationship between the length of waiting time and conflicts between doctors and patients. RESULTS: The mean wait time for the traditional calling system was 126 minutes, while the average idle time for nurses was 96 minutes/day. On the other hand, the mean wait time for the WeChat calling system was 33 minutes, and the average idle time for nurses was 72 minutes/day. The incremental profit (cost of traditional calling system - cost of WeChat calling system) achieved from switching systems was 13,879 yuan/month. Behavioral observations showed that wait time (OR=2.745, 95%CI 1.936~3.892 P<0.0001) was a risk factor for staff-patient conflict. CONCLUSION: The cost of the WeChat calling system was significantly lower than the traditional system. Also, the traditional calling system was time-consuming. Longer waiting time was the main factor affecting OPD quality and caused conflicts between doctors and patients.

Optical bistability in gap-plasmon metasurfaces in consideration of classical nonlocal effects.

Optical bistability of linear reflectance and third-harmonic generation is investigated in a metasurface consisting of metallic grating coupled with metallic film spaced with nonlinear dielectric material. Linear optical reflectance and electric field enhancement are achieved for gaps <20 nm in the presence of classical nonlocality in metallic nanostructures. Enlarged thresholds from the higher to lower reflectance states are observed from 140 kW/cm2 for the local model to 300 kW/cm2 for the nonlocal model for 0.5-nm gaps. Though the linear reflectance almost overlaps for local and nonlocal models for 20-nm gaps, the optical bistability hysteresis loops retain large differences because local field differences are amplified owing to the relation of nonlinear refraction with square of local field and historical evolution of the optical bistability.

Giant enhancement of harmonic generation in all-dielectric resonant waveguide gratings of quasi-bound states in the continuum.

We report the giant enhanced optical harmonic generation in all-dielectric silicon nitride (SiN) based resonant waveguide gratings (RWGs) of quasi-bound states in the continuum (BICs) of ultra-high Q factor and localized field. The BICs are realized by tuning the excitation of the guided modes modulated by geometry parameters of four-part grating layer. At a feasible structure of quasi-BIC for nanofabrication, the SHG and THG are enhanced by 103 and 106, compared with those from the RWGs of traditional two-part grating layer, respectively, and even up to 108 and 1010 compared with those from the planar SiN film, respectively. The resonance wavelength of quasi-BICs can be effectively tuned by the angle of incidence, while almost not affect the enhancement of SHG and THG response. Our results show that the efficiency harmonic generation from all-nonlinear-dielectric RWGs of quasi-BICs has potential applications for the integrated nonlinear photonic devices.

Graphene-Ag nanoparticles-cicada wings hybrid system for obvious SERS performance and DNA molecular detection.

In recent years, biomaterials have increasingly attracted attention on surface-enhanced Raman spectroscopy (SERS) due to their well Raman performance while metal particles are combined with biological substrates. Therefore, we propose an environmentally friendly substrate based on silver-plated cicada wings with seamless graphene layer (Gr-AgNPs-C.w.), which can be prepared with a simple and inexpensive method. Compared with AgNPs-C.w., Gr-AgNPs-C.w. hybrids show better SERS performance with high sensitivity, good uniformity and good stability with R6G detection. The minimum detected concentration can reach 10-15 M, and the value of R2 can reach 0.996, respectively. Theoretical simulation demonstrates the situation of electromagnetic field through COMSOL software. In addition, due to the affinity of graphene for biomolecules, we can successfully detect the DNA biomolecules through a simple process. Therefore, this cheap and efficient natural SERS substrate has great potential for a considerable number of biochemical SERS applications and can broaden the way in which multiple SERS platforms derived from other natural materials are prepared.

Experimental and theoretical investigation for surface plasmon resonance biosensor based on graphene/Au film/D-POF.

A D-shape plastic optical fiber (D-POF) surface plasmon resonance (SPR) biosensor based on the graphene/Au film (G/Au) was proposed and experimentally demonstrated for detection of DNA hybridization process. To improve the detection performance of SPR sensors, the Physical Vapor Deposition (PVD) method was used to evaporate the Au film directly onto the graphene grown on copper foil, and the Au film acted as a role of traditional Polymethyl Methacrylate (PMMA). The process made graphene and Au film form seamless contact. Next, the G/Au was transferred onto the D-shape fiber together. We explored the G/Au SPR sensor by using the finite element method (FEM) and obtained the optimum materials thickness to form configuration. Compared to other plastic optical fiber experiments, the proposed sensor's sensitivity was improved effectively and calculated as 1227 nm/RIU in a range of glucose solution. Meanwhile, our proposed sensor successfully distinguishes hybridization and single nucleotide polymorphisms (SNP) by observing the resonance wavelength change. It also exhibits a satisfactory linear response (R2 = 0.996) to the target DNA liquids with respective concentrations of 0.1nM to1µM, which shows this method's wide potential in medical diagnostics.

Label-free diagnosis of lung cancer with tissue-slice surface-enhanced Raman spectroscopy and statistical analysis.

Despite the rapid development of medical science, the diagnosis of lung cancer is still quite challenging. Due to the ultrahigh detection sensitivity of surface-enhanced Raman spectroscopy (SERS), SERS has a broad application prospect in biomedicine, especially in the field of tumor blood detection. Although Raman spectroscopy can diagnose lung cancer through tissue slices, its weak cross sections are problematic. In this study, silver nanoparticles (AgNPs) were added to the surface of lung tissue slices to enhance the Raman scattering signals of biomolecules. The electromagnetic field distribution of AgNPs prepared was simulated using the COMSOL software. SERS obtained from the slices reflected the difference in biochemical molecules between normal (n = 23) and cancerous (n = 23) lung tissues. Principal component-linear discriminate analysis (PCA-LDA) was utilized to classify lung cancer and healthy lung tissues. The receiver operating characteristic curve gave the sensitivity (95.7%) and specificity (95.7%) of the PCA-LDA method. This study sheds new light on the general applicability of SERS analysis of tissue slices in clinical trials.

Multifunctional paper strip based on GO-veiled Ag nanoparticles with highly SERS sensitive and deliverable properties for high-performance molecular detection.

The development of paper-based SERS substrates that can allow multi-component detection in real-word scenarios is of great value for applications in molecule detection under complex conditions. Here, a multifunctional SERS-based paper sensing substrate has been developed through the uniform patterning of high-density arrays of GO-isolated Ag nanoparticles on the hydrophilic porous cellulose paper strip (GO@AgNP@paper). Wet-chemical synthesis was used to provide the cover of SERS hot spots on any part of the paper, not just limited surface deposition. In virtue of the inherent ability of paper to deliver analytes by the capillary force, the detection ability of the GO@AgNP@paper substrate was greatly promoted, allowing as low as 10-19M R6G detection from microliter-volume (50 µL) samples. For the components with different polarity, the paper substrate can be used as an all-in-one machine to achieve the integration of separation and high-sensitive detection for ultralow mixture components, which improves the practical application value of SERS-based paper devices.

Determination of Trace Nickel in Water Samples by Graphite Furnace Atomic Absorption Spectrometry after Mixed Micelle-Mediated Cloud Point Extraction.

A simple and sensitive cloud point extraction method for the preconcentration of ultra-trace amounts of nickel as a prior step to its determination by graphite furnace atomic absorption spectrometry was proposed. It is based on the reaction of nickel with 2-(5-bromo-2-pyridylazo)-5-dimethylaminoaniline (5-Br-PADMA) in HAc⁻NaAc buffer media and mixed micelle-mediated extraction of the complex using the anionic surfactant sodium dodecyl sulfate sodium (SDS) and non-ionic surfactant (1,1,3,3-Tetramethylbutyl)phenyl-polyethylene (Triton X-114). The optimal reaction and extraction conditions such as pH, concentration of 5-Br-PADMA, SDS and Triton X-114, equilibrium temperature, incubation, and centrifuge time were evaluated and optimized. Under the optimal conditions, the calibration graph was linear over the range 0.1⁻5.5 ng/mL of nickel with a correlation coefficient of 0.9942. The detection limit obtained was 0.031 ng/mL, and the relative standard deviation was 2.1% for nickel (c = 2 ng/mL, n = 6). The proposed method was successfully applied to the determination of nickel in water samples.

Third-harmonic generation from gold nanowires of rough surface considering classical nonlocal effect.

We demonstrate that the nonlocal dielectric response of metal, comparing with the traditional local model, will significantly boost the third-order harmonic generation (THG) from gold nanowires of rough surface by a factor of several orders of magnitude. The enhancement is probably due to the penetrated field into the fine nanostructures on the metal surface in nonlocal model. The anisotropy THG efficiency versus the angle of incidence is also demonstrated due to the inhomogeneous surface morphology. The possible ways to verify the nonlocal effect to the THG are demonstrated. The results have a general significance in explaining the experimental observations.

Determination of Ultra-trace Rhodium in Water Samples by Graphite Furnace Atomic Absorption Spectrometry after Cloud Point Extraction Using 2-(5-Iodo-2-Pyridylazo)-5-Dimethylaminoaniline as a Chelating Agent.

A highly sensitive method based on cloud point extraction (CPE) separation/preconcentration and graphite furnace atomic absorption spectrometry (GFAAS) detection has been developed for the determination of ultra-trace amounts of rhodium in water samples. A new reagent, 2-(5-iodo-2-pyridylazo)-5-dimethylaminoaniline (5-I-PADMA), was used as the chelating agent and the nonionic surfactant TritonX-114 was chosen as extractant. In a HAc-NaAc buffer solution at pH 5.5, Rh(III) reacts with 5-I-PADMA to form a stable chelate by heating in a boiling water bath for 10 min. Subsequently, the chelate is extracted into the surfactant phase and separated from bulk water. The factors affecting CPE were investigated. Under the optimized conditions, the calibration graph was linear in the range of 0.1-6.0 ng/mL, the detection limit was 0.023 ng/mL for rhodium and relative standard deviation was 3.67% (c = 1.0 ng/mL, n = 11)．The method has been applied to the determination of trace rhodium in water samples with satisfactory results.