Physical Therapy May Not Be Successful for Patients With Cam-Type Femoroacetabular Impingement Syndrome and May Result in Insufficient Hip Range of Motion When Femoral Anteversion Is Less Than 16° and α-Angle Is Greater Than 65°.

PURPOSE: To identify factors associated with insufficient range of motion (ROM) improvement after the posterior pelvic tilt change in cam-type femoroacetabular impingement syndrome. METHODS: Preoperative computed tomography images from 71 consecutive patients with femoroacetabular impingement syndrome treated with arthroscopic cam resection were evaluated. Using a dynamic computer simulation program, 3-dimensional models with a 10° posterior pelvic tilt from the supine functional pelvic plane (baseline) were created by computed tomography models. Patients were divided into 2 groups: those who experienced >10° (effective group) and ≤10° (ineffective group) improvements in internal rotation at 90° flexion after a 10° posterior pelvic tilt. Demographic characteristics; preoperative range of internal rotation at 90° flexion; and radiographic parameters, including Tönnis grade, lateral center-edge angle, acetabular roof obliquity angle, central acetabular anteversion, cranial acetabular anteversion, femoral anteversion, and α angle, were compared in the 2 groups. Univariate and multivariable logistic regression analyses were performed to evaluate factors associated with insufficient ROM improvement following a 10° posterior pelvic tilt. RESULTS: The 71 patients included 58 men and 13 women, of mean age 41.4 ± 14.6 years. Posterior pelvic tilt was effective in 13 hips and ineffective in 58. Univariate analysis showed that preoperative range of internal rotation at 90°flexion, femoral anteversion, and α angle differed significantly in the 2 groups. Multivariable analysis showed that femoral anteversion <16° (odds ratio 7.4; 95% confidence interval 1.6-35; P = .012) and α angle >65° (odds ratio 6.7; 95% confidence interval 1.2-37; P = .027) were significant factors associated with insufficient ROM improvement after posterior pelvic tilt. CONCLUSIONS: Physical therapy may not be successful for patients with cam-type femoroacetabular impingement syndrome and may result in insufficient hip ROM when femoral anteversion is less than 16° and α-angle is greater than 65°. CLINICAL RELEVANCE: Patients with a prominent cam-type deformity and lower anterior femoral anteversion are at high risk of clinical failure following improvement in pelvic mobility by conservative treatment alone and are likely to benefit from surgery for cam deformity.

Differences in Diagnostic Sensitivity of Cultures Between Sample Types in Periprosthetic Joint Infections: A Systematic Review and Meta-Analysis.

BACKGROUND: Differences between the bacterial culture results of the preoperative fluid, intraoperative tissue, and sonication fluid of implants in the diagnosis of periprosthetic joint infection (PJI) are important issues in clinical practice. This study aimed to identify the differences in pooled diagnostic accuracy between culture sample types for diagnosing PJI by performing a systematic review and meta-analysis. METHODS: This study was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analysis statement. A comprehensive literature search of PubMed, Cumulative Index to Nursing and Allied Health Literature, and Cochrane Library databases was performed. Data extraction and study assessment using the quality assessment of diagnostic accuracy studies were performed independently by two reviewers. The pooled sensitivity, specificity, summary receiver operating characteristic curve, and area under the summary receiver operating characteristic curve were estimated for each sample type. RESULTS: There were thirty-two studies that were included in the analysis after screening and eligibility assessment. The pooled sensitivities of preoperative fluid, intraoperative tissue, and sonication fluid for the diagnosis of PJI were 0.63 (95% confidence interval [CI] 0.56 to 0.70), 0.71 (95% CI 0.63 to 0.79), and 0.78 (95% CI 0.68 to 0.85), while the specificities were 0.96 (95% CI 0.93 to 0.98), 0.92 (95% CI 0.86 to 0.96), and 0.91 (95% CI 0.83 to 0.95), respectively. The area under the curves for preoperative fluid, intraoperative tissue, and sonication fluid were 0.86, 0.88, and 0.90, respectively. CONCLUSIONS: Sonication fluid culture demonstrated better sensitivity compared with the conventional culture method, and preoperative fluid culture provided lower sensitivity in diagnosing PJI.

Deformity analysis of the lower limb on the coronal plane in patients with rheumatoid arthritis and osteoarthritis.

OBJECTIVES: To evaluate joint orientation angles of the coronal plane in patients with rheumatoid arthritis (RA) in comparison with osteoarthritis (OA). METHODS: In total, 72 patients with RA (90 knees) and 76 patients with OA (90 knees) who underwent total knee arthroplasty were enrolled. The hip-knee-ankle (HKA) angle, mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and joint line convergence angle (JLCA) were measured on preoperative long-leg radiographs in the standing position. Student's t-test was used to assess differences in radiographic data between patients with RA and OA. RESULTS: In knees with RA and OA, the mean HKA was -3.4 ± 9.4° and -10.6 ± 8.0°, the mean mLDFA was 86.6 ± 3.7° and 88.2 ± 2.7°, the mean mMPTA was 85.9 ± 4.0° and 84.3 ± 3.7°, and the mean JLCA was 2.7 ± 4.2° and 6.8 ± 4.1°. All parameters in the knees with RA were more valgus than those with OA. CONCLUSIONS: Knees with RA had a great variability in joint orientation angles on the coronal plane; the whole lower limb alignment and the femur, tibia, and joint were more valgus in knees with RA than with OA.

Utility of CT-based navigation in revision total hip arthroplasty for a patient with severe posterior pelvic tilt-case report.

BACKGROUND: Hip dislocation after total hip arthroplasty (THA) or hemi-arthroplasty is a rare but serious complication. Dislocation may be prevented by appropriate positioning of the cup angle of inclination and anteversion. CASE PRESENTATION: This report describes a 66-year-old woman who underwent revision THA using a computer tomography (CT)-based navigation system to treat an anterior dislocation after hemi-arthroplasty due to a severe posterior pelvic tilt. At initial presentation, her sagittal pelvic tilt angle, measured as anterior pelvic plane (APP) in the supine position, was 38 degrees posterior to the coronal plane. Owing to the posterior pelvic tilt, revision THA was performed using CT-based navigation, while dual mobility was utilized to reduce the risk of re-dislocation. Postoperatively, her sagittal pelvic tilt angle showed further progression over time, with an APP of 66 degrees posterior to the coronal plane in the standing position 3 years after revision THA. Simulation with the Zed Hip system showed that the risk of implant-to-implant impingement was much higher posteriorly than anteriorly. Gait analysis demonstrated hyperextension of the hip joint while walking, although hip joint function required for daily activity was maintained. CONCLUSIONS: Preoperative planning of implant orientation, based on posterior progression of pelvic tilt and accurate placement of components, is important to prevent dislocation in patients with severe posterior pelvic tilt. A dual mobility cup may also improve hip function in these patients.

Comparison Between 3-Dimensional Multiple-Echo Recombined Gradient Echo Magnetic Resonance Imaging and Arthroscopic Findings for the Evaluation of Acetabular Labrum Tear.

PURPOSE: To evaluate radially reconstructed 3.0-Tesla 3-dimensional multiple-echo recombined gradient echo (MERGE) magnetic resonance imaging (MRI) without arthrography for the assessment of acetabular labrum tears, using arthroscopic evaluation as the reference standard. METHODS: A total of 71 consecutive hips, including 29 with femoroacetabular impingement, 26 with borderline developmental dysplasia of the hip, and 16 with early-stage osteoarthritis, were evaluated in this retrospective study. MERGE MRI findings were evaluated according to the modified Czerny classification for 3 regions of interest: anterior region, anterolateral region, and lateral region. Cases with severe degeneration that was not concordant with any stage in the original Czerny classification were defined as stage Ⅳ. MERGE MRI findings were compared with arthroscopic findings, and the sensitivity, specificity, positive predictive value, and negative predictive value in terms of the existence of labrum tears were calculated. RESULTS: MERGE MRI findings revealed labrum tears more frequently in the anterolateral region than in the anterior and lateral regions (P < .01). In cases of femoroacetabular impingement and borderline developmental dysplasia of the hip in particular, labrum tears were more frequently observed on MRI in the anterolateral region than in the lateral region (P < .05). In comparison with MRI findings and arthroscopic findings, our newly defined stage IV in the modified Czerny classification was more frequently observed in cases with a Multicenter Arthroscopy of the Hip Outcomes Research Network (MAHORN) classification of degenerative or complex (P < .01). The average sensitivity and specificity of all regions for the existence of labrum tears were 85% and 56%, respectively. Sensitivity and specificity were 79% and 50%, respectively, in the anterior region; 96% and 50%, respectively, in the anterolateral region; and 70% and 57%, respectively, in the lateral region. CONCLUSIONS: We validated the diagnostic performance of 3.0-Tesla 3-dimensional MERGE MRI for evaluating acetabular labrum tears and made comparisons with arthroscopic findings. Radially reconstructed MERGE magnetic resonance images showed excellent sensitivity for the diagnosis of labrum tears, particularly in the anterolateral region. The newly defined stage IV was distinctive of early-stage osteoarthritis cases with degeneration and/or complex arthroscopic findings. The noninvasive imaging modality of radially reconstructed MERGE MRI may be an alternative to magnetic resonance arthrography for evaluating labrum tears. LEVELS OF EVIDENCE: Level Ⅱ, development of diagnostic criteria.

Mechanical Strength of the Proximal Femur After Arthroscopic Osteochondroplasty for Femoroacetabular Impingement: Finite Element Analysis and 3-Dimensional Image Analysis.

PURPOSE: To examine the influence of femoral neck resection on the mechanical strength of the proximal femur in actual surgery. METHODS: Eighteen subjects who received arthroscopic cam resection for cam-type femoroacetabular impingement (FAI) were included. Finite element analyses (FEAs) were performed to calculate changes in simulative fracture load between pre- and postoperative femur models. The finite element femur models were constructed from computed tomographic images; thus, the models represented the shape of the original femur, including the bone resection site. Three-dimensional image analysis of the bone resection site was performed to identify morphometric factors that affect strength in the postoperative femur model. Four oblique sagittal planes running perpendicular to the femoral neck axis were used as reference planes to measure the bone resection site. RESULTS: At the transcervical reference plane, both the bone resection depth and the cross-sectional area at the resection site correlated strongly with postoperative changes in the simulated fracture load (R2 = 0.6, P = .0001). However, only resection depth was significantly correlated with the simulated fracture load at the reference plane for the head-neck junction. The resected bone volume did not correlate with the postoperative changes in the simulated fracture load. CONCLUSIONS: The results of our FEA suggest that the bone resection depth measured at the head-neck junction and transcervical reference plane correlates with fracture risk after osteochondroplasty. By contrast, bone resection at more proximal areas did not have a significant effect on the postoperative femur model strength in our FEA. The total volume of resected bone was also not significantly correlated with postoperative changes in femur model strength. CLINICAL RELEVANCE: This biomechanical study using FEA suggest that there is a risk of femoral neck fracture after arthroscopic cam resection, particularly when the resected lesion is located distally.

Ten-year survival rate after rotational acetabular osteotomy in adulthood hip dysplasia.

BACKGROUND: Rotational acetabular osteotomy (RAO) is an effective joint-preserving surgical treatment for adulthood hip dysplasia (AHD). Despite sufficient correction of acetabular dysplasia, some patients still experience osteoarthritis (OA) progression and require total hip arthroplasty (THA). The purposes of the current study were to investigate the survival rate and the risk factors for OA progression or THA requirement after RAO and to explore whether acetabular overcorrection relates to OA progression. METHODS: Fifty-six patients (65 hips, mean age: 36.5 ± 11.7 years) with AHD who underwent RAO and were followed up for >10 years (mean: 15.0 ± 3.2 years) were enrolled in this study. A Kaplan-Meier survival analysis was performed to assess the non-OA progression rate and THA-free survival rate of RAO during the 10-year follow-up. To analyze the risk factors for OA progression and THA requirement, the Cox proportional hazards regression analysis was performed. RESULTS: No OA progression was found in 76.7% of the patients, and THA was not required in 92.3% during the 10-year follow-up. By multivariate regression analysis, older age at the time of surgery was a risk factor for both OA progression (hazard ratio [HR] = 1.047, 95% confidence interval [CI] = 1.005-1.091) and THA requirement (HR = 1.293, 95% CI = 1.041-1.606). CONCLUSION: RAO is an effective surgical procedure for symptomatic patients with AHD that prevents OA progression and protects the hips from undergoing THA. However, older patients have a higher risk for both OA progression and THA requirement.

Preoperative planning for implant placement with consideration of pelvic tilt in total hip arthroplasty: postoperative efficacy evaluation.

BACKGROUND: In total hip arthroplasty (THA), tilting of the pelvis alters the cup placement angles. Thus, the cup angles need to be planned with consideration of the effects of pelvic tilt. In the present study, we evaluated the efficacy of preoperative planning for implant placement with consideration of pelvic tilt in THA, and the accuracy of a CT-based computer navigation for implant positioning. METHODS: We examined 75 hips of 75 patients who underwent THA and were followed-up for one year postoperatively. The patients were divided into three groups (anterior, intermediate, posterior tilt) according to their preoperative pelvic tilt. Preoperative planning for implant placement was made with consideration of pelvic tilt and a CT-based navigation was used to execute the preoperative planning. Cup inclination, cup anteversion, and combined anteversion (CA) in supine and standing positions were examined 1 year after THA. The accuracy of the computer navigation was also examined. RESULTS: Mean CA was 35.0 ± 5.8° in supine position and 39.3 ± 5.7° in standing position. CA did not differ among the three subgroups (anterior, intermediate, posterior tilt) in either supine or standing position, indicating implant placements to be equally effective. The desired CA (37.3°) was midway between those in supine and standing positions for each subgroup. Respective mean absolute errors between preoperative planning and postoperative CT measurement was 5.3 ± 5.2° for CA. CONCLUSION: We obtained favorable THA results with preoperative planning with consideration of pelvic tilt by demonstrating supine and standing CA to be unaffected by preoperative pelvic tilt one year postoperatively. Mean absolute error of CA between preoperative planning and postoperative measurement was 5° with use of the CT-based navigation.

Postural and Chronological Change in Pelvic Tilt Five Years After Total Hip Arthroplasty in Patients With Developmental Dysplasia of the Hip: A Three-Dimensional Analysis.

The pelvis generally tilts to the posterior with movement from the supine to standing position, and with time after total hip arthroplasty (THA). This study aimed to investigate changes in pelvic tilt from the preoperative supine position to the standing position at 5 years after THA (pelvic change, PC). We measured pelvic tilt using a 2D-3D matching technique in 77 unilaterally affected patients who underwent primary THA. PC in 8% of all patients was ≤-20°, and the greatest PC was -25°. In these patients, posterior pelvic tilt continued up to 5 years after THA. These patients were older, and their lumbo-lordotic angle was small. For such cases, cup orientation should be planned to account for continuous posterior change in pelvic tilt after THA.

Teriparatide Versus Alendronate for the Preservation of Bone Mineral Density After Total Hip Arthroplasty - A randomized Controlled Trial.

In this study, the effect of teriparatide for the prevention of bone mineral density (BMD) loss after THA was compared with alendronate in a randomized controlled trial. Forty-eight patients were assigned to three groups, namely, the teriparatide, alendronate, and no medication groups. Dual-energy x-ray absorptiometry (DEXA) was performed at 1 week post-surgery as a baseline reference, followed by subsequent measurements at 12, 24, and 48 weeks postoperatively. For periprosthetic BMD loss, a significant effect of teriparatide was demonstrated, though its effect was similar to alendronate. On the other hand, higher lumbar BMD was observed in the teriparatide group than in the alendronate group at 48 weeks post-surgery. Teriparatide administration may be one reasonable option for osteoporotic patient to preserve the periprosthetic BMD after THA.

Difference in Postoperative Periprosthetic Bone Mineral Density Changes Between 3 Major Designs of Uncemented Stems: A 3-Year Follow-Up Study.

BACKGROUND: Although few studies have examined the direct effect of stress shielding on clinical outcomes, periprosthetic bone loss due to stress shielding is still an issue of concern, especially when physicians perform uncemented total hip arthroplasty (THA) in younger patients. Differences in femoral stem design may affect the degree of postoperative stress shielding. Therefore, the characteristics of the behavior for stress shielding of each type of femoral stem should be determined. This study compares differences in bone mineral density (BMD) change in the femur after primary THA between 3 major types of uncemented stems. METHODS: Among a total of 89 hips, 26 hips received THA with a fit-and-fill type stem (VerSys Fiber Metal MidCoat; Zimmer, Inc, Warsaw, IN), 32 hips received a tapered rectangular Zweymüller-type stem (SL-Plus; Smith & Nephew Inc, Memphis, TN), and 31 received a tapered wedge-type stem (Accolade TMZF; Stryker Orthopaedics, Mahwah, NJ). BMD measurements were performed with a HOLOGIC Discovery device (Hologic Inc, Waltham, MA). RESULTS: BMD in the medial-proximal femur was maintained for 3 years after THA in the group with the tapered wedge-type stem. BMD in the lateral-proximal femur was maintained for 3 years after THA in the group with the Zweymüller-type stem. There were no significant differences in the Harris Hip Score among the 3 stem groups preoperatively and 1, 2, and 3 years after surgery. CONCLUSION: There are clear differences in postoperative BMD loss of the proximal femur among these 3 commonly used uncemented stems.

The current status and future prospects of computer-assisted hip surgery.

The advances in computer assistance technology have allowed detailed three-dimensional preoperative planning and simulation of preoperative plans. The use of a navigation system as an intraoperative assistance tool allows more accurate execution of the preoperative plan, compared to manual operation without assistance of the navigation system. In total hip arthroplasty using CT-based navigation, three-dimensional preoperative planning with computer software allows the surgeon to determine the optimal angle of implant placement at which implant impingement is unlikely to occur in the range of hip joint motion necessary for daily activities of living, and to determine the amount of three-dimensional correction for leg length and offset. With the use of computer navigation for intraoperative assistance, the preoperative plan can be precisely executed. In hip osteotomy using CT-based navigation, the navigation allows three-dimensional preoperative planning, intraoperative confirmation of osteotomy sites, safe performance of osteotomy even under poor visual conditions, and a reduction in exposure doses from intraoperative fluoroscopy. Positions of the tips of chisels can be displayed on the computer monitor during surgery in real time, and staff other than the operator can also be aware of the progress of surgery. Thus, computer navigation also has an educational value. On the other hand, its limitations include the need for placement of trackers, increased radiation exposure from preoperative CT scans, and prolonged operative time. Moreover, because the position of a bone fragment cannot be traced after osteotomy, methods to find its precise position after its movement need to be developed. Despite the need to develop methods for the postoperative evaluation of accuracy for osteotomy, further application and development of these systems are expected in the future.

Bone mineral density distribution in the proximal femur and its relationship to morphologic factors in progressed unilateral hip osteoarthritis.

Although an adverse relationship between osteoporosis and osteoarthritis (OA) has been reported, it remains controversial. In most previous reports of OA, bone mineral density (BMD) changes in the subtrochanteric region have not been clarified, whilst BMD of the femoral neck and trochanteric region has been well investigated. In our current study, we investigated the BMD ratio compared to the contralateral side in the whole proximal femurs of hip OA patients. We aimed to clarify the morphologic factor that may influence these BMD ratios. We performed dual energy X-ray absorptiometry (DEXA) analysis of 69 hip joints from unilateral progressed OA cases. The minimum joint space, center edge angle, Sharp angle, acetabular head index, neck-shaft angle, and leg length discrepancy were also measured as radiographic factors. The correlation between BMD ratio and radiographic morphologic factors was then evaluated by logistic regression. The BMD ratio was higher in the femoral neck than in the distal region. In terms of radiographic factors, the neck-shaft angle was revealed to influence the decreased BMD ratio in the distal subtrochanteric part, whilst the leg length discrepancy and Sharp angle showed a relationship with the increased BMD ratio in the proximal neck region. The discrepancy in the BMD ratio between the femoral neck and the distal subtrochanteric region in the proximal femur is influenced by several morphologic factors.

Clinical utility of antibiotic-loaded hydroxyapatite block for treatment of intractable periprosthetic joint infection and septic arthritis of the hip.

OBJECTIVE: Antibiotic-loaded hydroxyapatite block (AHAB) allows gradual release of antibiotics for long duration without thermal damage and, therefore, is potentially a more effective antibacterial spacer than antibiotic-loaded polymethylmethacrylate cement (ALAC). The purposes of this study are to assess the utility of AHAB for the treatment of periprosthetic joint infection (PJI) or septic arthritis (SA) of the hip and to assess the potency of AHAB and ALAC in vitro. METHODS: AHAB was utilized in two-stage reconstruction surgery for 20 PJI and 7 SA patients. Clinical success was confirmed if the patients did not show any sign of recurrence of infection during the follow-up period. Duration and amount of active vancomycin (VCM) released from AHAB and ALAC spacer were investigated in vitro. RESULTS: Two-stage reconstruction using AHAB significantly improved hip function and showed 100% clinical success with mean follow-up of 37 months. The in vitro duration of the active effect of VCM released from AHAB (21 days) was longer than that from ALAC (7 days) and the amount of active VCM released from AHAB was higher than that from ALAC. CONCLUSIONS: AHAB promises to release higher amounts of active VCM for longer durations than ALAC; therefore, it is a promising treatment for intractable PJI or SA.

Effects of hip joint center location and femoral offset on abductor muscle strength after total hip arthroplasty.

OBJECTIVES: The purposes of this study were 1) to examine the changes in the hip joint center (HJC) position and the femoral offset (FO) after total hip arthroplasty (THA) and 2) to investigate the effects of the HJC and FO on isometric abductor muscle strength. METHODS: We evaluated 51 patients who underwent unilateral primary THA. The FO, and horizontal and vertical distances from the HJC to the tip of the teardrop were measured and isometric hip abductor muscle strength was measured. RESULTS: The HJC of the affected side moved medially postoperatively compared with that of the unaffected side (p < 0.05), and the FO was reconstructed similarly to the unaffected side. There were significant negative correlations between the changes in the horizontal distance from the HJC and FO to the tip of the teardrop. An increase in the FO and infero-medial cup position optimized hip abductor muscle strength. CONCLUSION: The HJC was reconstructed medially and superiorly, and the change in the FO after THA was influenced by the change in the horizontal distance of the HJC. Multiple regression analysis revealed that the medial and inferior HJC and increase in the FO constitute an effective procedure for restoring abductor strength.

Use of 18F-fluoride positron emission tomography as a predictor of the hip osteoarthritis progression.

OBJECTIVE: The prediction of hip osteoarthritis (OA) progression is still a difficult issue. We have adopted (18)F-fluoride positron emission tomography (PET) for the evaluation of hip osteoarthritis, and investigated the prediction utility of (18)F-fluoride PET for both pain worsening and OA progression using a logistic regression model. MATERIALS AND METHODS: A total of 57 hip joints were analyzed for progression risk factors for pain worsening and minimum joint space (MJS) narrowing by logistic regression analysis. Sex, age, BMI, existence of pain, the PET maximum standardized uptake value (SUV(max)), Kellgren and Lawrence grade, MJS, and follow-up period were used as explanatory variables. Receiver operating characteristic analysis was performed to calculate the cutoff value of the SUV(max). RESULTS: Multivariate logistic regression analysis revealed significant differences only in the SUV(max) values for pain worsening and MJS narrowing. The odds ratio of the SUV(max) for pain worsening was 1.89, and for MJS narrowing it was 11.02. The SUV(max) cutoff value was 7.2 (sensitivity: 1.00, specificity: 0.84) for pain worsening and 6.4 (sensitivity: 0.92, specificity: 0.83) for MJS narrowing. CONCLUSIONS: Our results indicate that the PET SUV(max) is a best predictor of pain worsening and MJS narrowing. This imaging modality has a great potential for the prediction of OA progression.

The effectiveness of mono or combined osteoporosis drug therapy against bone mineral density loss around femoral implants after total hip arthroplasty.

Several previous studies have reported that bone mineral density (BMD) loss around femoral implants is a common outcome, particularly in the proximal femur, after total hip arthroplasty (THA). The purpose of this study was to investigate the effectiveness of alendronate monotherapy and combined therapy using alendronate and alfacalcidol for BMD preservation around femoral implants after primary THA. This study series included 60 patients who were classified into monotherapy (alendronate alone) (n = 18), combined-therapy (alendronate and alfacalcidol) (n = 20) or non-medication (n = 22) groups. The periprosthetic BMD and profile of the biochemical markers such as bone-specific alkaline phosphatase and serum N-terminal telopeptides of type-1 collagen (NTX) were measured at 1, 12, 24 and 48 weeks after surgery. The BMD values in the region of the calcar of monotherapy and combined-therapy patients were maintained and were significantly higher than those of non-medication patients at each measurement period. The plasma levels of NTX in the monotherapy and combined-therapy groups were found to be significantly lower than those in the non-medication group at each measurement period. In conclusion, the monotherapy and combined-therapy regimens significantly prevent periprosthetic BMD loss around femoral implants, most notably in the calcar, compared to no medication.

Evaluation of the time period for which real-time polymerase chain reaction detects dead bacteria.

Real-time polymerase chain reaction (PCR) is currently widely used for the diagnosis of infections. We evaluated the time after treatment during which real-time PCR can detect dead bacteria. The presence of bacterial DNA was identified by real-time PCR through methicillin-resistant Staphylococcus (MRS)-PCR and universal PCR. Methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus epidermidis, and Escherichia coli were each killed with alcohol, antibiotics, or heat treatment in vitro. The detection periods of MRS-PCR for MRSA treated by alcohol, vancomycin, linezolid, and heat were found to be less than 16, 8, 12, and 8 weeks, respectively. The detection period of universal PCR for S. epidermidis treated by alcohol, cefazolin, and heat was less than 20, 20, and 4 weeks, whereas that for E. coli was 8, 20, and 4 weeks, respectively. The presence of detectable bacterial DNA in infected arthroplasty patients before and after successful treatment was also assessed by MRS- and universal PCR. MRS-PCR was positive in 6 patients before treatment and all became negative after a mean interval of 20.8 weeks (95% confidential interval, 13.2 to 33.7) after treatment. Universal PCR detected remnant bacterial DNA in 4 patients at a mean of 15.2 weeks (95% CI, 12.4 to 18.0) after treatment and was negative in 7 patients at a mean of 17.3 weeks (95% CI, 10.6 to 24.0) after treatment. Our studies revealed that real-time PCR detects dead bacteria for several weeks, but this capability decreases with time and is likely lost by 20 weeks after treatment.

Selective pharmacological prophylaxis based on individual risk assessment using plasma levels of soluble fibrin and plasminogen-activator inhibitor-1 following total hip arthroplasty.

OBJECTIVES: The purpose of this prospective study was to evaluate the utility of preferential application of pharmacoprophylaxis based on the quantitative evaluation by soluble fibrin (SF) and plasminogen activator inhibitor-1 (PAI-1) analysis on the day after total hip arthroplasty (THA). METHODS: A hundred and sixteen patients were enrolled. High-risk patients were defined as those with elevated levels of SF or PAI-1, beyond their cut-off values, on the day after THA. For high-risk patients, fondaparinux was administered for 10 days postoperatively. When both plasma levels of SF and PAI-1 were less than their cutoff levels, the patients were regarded to be at low risk. For low-risk patients, only mechanical prophylaxis was applied. RESULTS: Sixty patients (52%) were considered to be at high risk. Among them, venous thromboembolism (VTE) was detected in five patients (8%) by CT angiography. In addition, there were four patients (3%) who developed bleeding complications. Fifty-six patients (48%) were considered to be at low risk, and only one patient (2%) developed VTE. CONCLUSION: The measurement of SF and PAI-1 levels on the day after surgery may be helpful to identify the individual risk for postoperative VTE. According to this evaluation, a half of patients might not need to administer anticoagulant agents following surgery.