Cannabidiol and Vitamin D3 Impact on Osteogenic Differentiation of Human Dental Mesenchymal Stem Cells.

Background and objective: The aim of the present study was to establish a new differentiation protocol using cannabidiol (CBD) and vitamin D3 (Vit. D3) for a better and faster osteogenic differentiation of dental tissue derived mesenchymal stem cells (MSCs). Materials and methods: MSCs were harvested from dental follicle (DFSCs), dental pulp (DPSCs), and apical papilla (APSCs) of an impacted third molar of a 17-year old patient. The stem cells were isolated and characterized using flow cytometry; reverse transcription polymerase chain reaction (RT-PCR); and osteogenic, chondrogenic, and adipogenic differentiation. The effects of CBD and Vit. D3 on osteogenic differentiation of dental-derived stem cell were evaluated in terms of viability/metabolic activity by alamar test, expression of collagen1A, osteopontin (OP), osteocalcin (OC), and osteonectin genes and by quantification of calcium deposits by alizarin red assay. Results: Stem cell characterization revealed more typical stemness characteristics for DFSCs and DPSCs and atypical morphology and markers expression for APSCs, a phenotype that was confirmed by differences in multipotential ability. The RT-PCR quantification of bone matrix proteins expression revealed a different behavior for each cell type, APSCs having the best response for CBD. DPSCs showed the best osteogenic potential when treated with Vit. D3. Cultivation of DFSC in standard stem cell conditions induced the highest expression of osteogenic genes, suggesting the spontaneous differentiation capacity of these cells. Regarding mineralization, alizarin red assay indicated that DFSCs and APSCs were the most responsive to low doses of CBD and Vit. D3. DPSCs had the lowest mineralization levels, with a slightly better response to Vit. D3. Conclusions: This study provides evidence that DFSCs, DPSCs, and APSCs respond differently to osteoinduction stimuli and that CBD and Vit. D3 can enhance osteogenic differentiation of these types of cells under certain conditions and doses.

Modulatory effect of curcumin analogs on the activation of metalloproteinases in human periodontal stem cells.

Periodontitis progresses due to increased levels of active metalloproteinases (MMPs) and the imbalance between MMPs and their tissue inhibitors (TIMPs). Natural curcumin limits the lytic activity of MMPs but has low cellular uptake. Use of synthetic curcumin analogs could be a means of overcoming this limitation of treatment efficiency. Human periodontal stem cells were isolated from gingival tissue, gingival ligament fibers, periodontal ligament, and alveolar bone. The effect of five synthetic curcumin analogs was compared with that of natural curcumin by assessing cytotoxicity [by 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay], the cellular uptake (by fluorometry), the proteolytic activities of MMP-2 and -9 (by zymography), and the levels of TIMP-1 (by ELISA). Our results indicated increased cytotoxicity of synthetic curcumins for doses between 100 and 250 µM. At a concentration of 10 µM, cellular uptake of synthetic curcumins varied depending on their chemical structure. The curcumin compounds modulated pro-MMP-2 levels and increased TIMP-1 production. There was no detectable synthesis of pro-MMP-9 and no activation of MMPs 2 and 9. Gingival tissue and gingival ligament fiber stem cells were most responsive to treatment, showing inverse correlations between pro-MMP-2 and TIMP-1 levels. In conclusion, synthetic curcumins influenced the balance between pro-MMP-2 and TIMP-1 in human periodontal stem cells in vitro, and this could open perspectives for their application as adjuvants in periodontal therapy.

Osseointegration of titanium scaffolds manufactured by selective laser melting in rabbit femur defect model.

The aim of this study was to assess the osseointegration of two series of titanium (Ti) scaffolds with 0.8 and 1 mm cell size obtained by Selective Laser Melting (SLM) technique. One of the series had the Ti surface unmodified, while the other had the Ti surface coated with silicon-substituted nano-hydroxyapatite (nano-HapSi). The scaffolds were implanted in the femur bone defects of 6 White Californian male rabbits: three animals were implanted with 0.8 mm cell size scaffolds and three animals with 1 mm cell size scaffolds, respectively. The bone fragments and scaffolds harvested at 2, 4 and 6 months were histologically analyzed using conventional light microscopy (LM) and scanning electron microscopy (SEM) for the qualitative evaluation of the bone tissue formed in contact with the scaffold. Both LM and SEM images indicated a better osseointegration for nano-HapSi coated Ti scaffolds. LM revealed that the compact bone formed in the proximity of nano-HapSi-coated scaffolds was better organized than spongy bone associated with unmodified scaffolds. Moreover, Ti scaffolds with meshes of 0.8 mm showed higher osseointegration compared with 1 mm. SEM images at 6 months revealed that the bone developed not only in contact with the scaffolds, but also proliferated inside the meshes. Nano-HapSi-coated Ti implants with 0.8 mm meshes were completely covered and filled with new bone. Ti scaffolds osseointegration depended on the mesh size and the surface properties. Due to the biocompatibility and favorable osseointegration in bone defects, nano-HapSi-coated Ti scaffolds could be useful for anatomical reconstructions.

Temporal bone trauma effects on auditory anatomical structures in mastoid obliteration.

PURPOSE: The risk of temporal bone fractures in head trauma is not negligible, as injuries also depend on the resistance and integrity of head structures. The capacity of mastoid cells to absorb part of the impact kinetic energy of the temporal bone is diminished after open cavity mastoidectomy, even if the surgical procedure is followed by mastoid obliteration. The aim of our study was to evaluate the severity of lesions in auditory anatomical structures after a lateral impact on cadaveric temporal bones in which open cavity mastoidectomy followed by mastoid obliteration was performed, compared to cadaveric temporal bones with preserved mastoids. METHODS: The study was carried out on 20 cadaveric temporal bones, which were randomly assigned to two groups. In the study group, open cavity mastoidectomy followed by mastoid obliteration with heterologous materials was performed. All temporal bones were impacted laterally under the same conditions. Temporal bone fractures were evaluated by CT scan. RESULTS: External auditory canal fractures were six times more seen in the study group. Tympanic bone fractures were present in 80% of the samples in the study group and 10% in the control group (p = .005). Middle ear fractures were found in 70% of the samples in the study group and 10% in the control group (p = .02). Otic capsule violating fractures of the temporal bone were present only in the study group. CONCLUSIONS: Mastoid obliteration with heterologous materials after open cavity mastoidectomy increases the risk of fracture, with the involvement of auditory anatomical structures.

An Intra-Oral Optical Sensor for the Real-Time Identification and Assessment of Wine Intake.

Saliva has gained considerable attention as a diagnostics alternative to blood analyses. A wide spectrum of salivary compounds is correlated to blood concentrations of biomarkers, providing informative and discriminative data regarding the state of health. Intra-oral detection and assessment of food and beverage intake can be correlated and provides valuable information to forecast the formation and modification of salivary biomarkers. In this context, the present work proposes a novel intra-oral optical fiber sensor, developed around an optical coupler topology, and exemplified on the detection and assessment of wine intake, which is accounted for example for the formation of Nε-carboxymethyllysine Advanced Glycation End-products. A laboratory proof of concept validates the proposed solution on four white and four red wine samples. The novel optical sensor geometry shows good spectral properties, accounting for selectivity with respect to grape-based soft drinks. This enables intra-oral detection and objective quality assessment of wine. Moreover, its implementation exploits the advantages of fiber-optics sensing and facilitates integration into a mouthguard, holding considerable potential for real-time biomedical applications to investigate Advanced Glycation End-products in the saliva and their connection with consumption of wine, for the evaluation of risk factors in diet-related diseases.

Mandibular aneurysmal bone cyst in an elderly patient: Case report.

OBJECTIVE: The article aims to highlight the challenge of establishing the presumptive aetiological diagnosis when unilocular or multilocular radiolucencies are identified in an elderly patient's jawbones. MATERIALS AND METHODS: A mandibular cyst-like lesion was identified in a 73-year-old patient. The therapeutic decision was cyst enucleation and grafting of the bone defect. RESULTS: The initial presumptive diagnosis was invalidated by the histopathological examination that revealed the features characteristic for the aneurysmal bone cyst. CONCLUSION: Aneurysmal bone cyst in an elderly patient is a rare condition.

Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis.

Peripheral facial paralysis is accompanied by facial motor disorders and also, by oral dysfunctions. The aim of this study was to evaluate the lip forces and chewing efficiency in a group of children with peripheral facial paralysis. The degree of peripheral facial paralysis in the study group (n 11) was assessed using the House-Brackmann scale. The control group consisted of 21 children without facial nerve impairment. To assess lip forces, acrylic vestibular plates of three sizes were used: large (LVP), medium (MVP) and small (SVP). The lip force was recorded with a force transducer coupled with the data acquisition system. Masticatory efficiency was evaluated by the ability to mix two differently colored chewing gums. The images were processed with Adobe Photoshop CS3 (Delaware Corporation, San Jose, California, United States) and the number of pixels was quantified with the Image J software (DHHS/NIH/NIMH/RSB, Maryland, United States). For statistical analysis, the following statistical analysis were used: Pearson or Spearman correlation coefficient, multiple linear regression analysis, multiple logistic regression analysis, and optimal cutoff values for muscular dysfunction. There were statistically significant differences between lip forces in the following three groups: p=0.01 (LVP), p=0.01 (MVP), and p=0.008 (SVP). The cutoff values of lip forces in the study group were as follows: 7.08 N (LVP), 4.89 N (MVP), and 4.24 N (SVP). There were no statistically significant differences between the masticatory efficiency in the two groups (p=0.25). Lip forces were dependent on the degree of peripheral facial paralysis and age, but not on gender. In peripheral facial paralysis in children, a significant decrease of lip forces, but not masticatory efficiency, occurs.

Human papillomavirus infection in the oromaxillofacial area: Clinical anatomy and histological considerations.

Clinical manifestations of human papillomavirus (HPV) infection in the head and neck can range from benign lesions, which are the most frequent, to malignant lesions. The prevalence of head and neck cancer is increasing, despite currently decreasing trends in known risk factors such as smoking and alcohol use. A new patient profile has appeared in recent practice: most frequently a middle-aged male patient who does not smoke or drink alcohol, is sexually active (possibly having multiple partners), and presents with oral or cervicofacial lesions requiring diagnosis and treatment. Another risk factor that should be considered in these patients is HPV infection. The association of oral potentially malignant disorders (OPMD) with HPV is a challenge for the medical practitioner. The gold standard for diagnosis is histopathological examination, which can also yield evidence suggesting HPV infection. Determination of the viral genotype provides additional data for assessing the oncological risk of an HPV infection. Treatment of these patients is aimed at removing the lesions, in association or not with antiviral treatment and recurrence control.

Developing Bioactive Hydrogels with Peptides for Dental Application.

Dental caries is an avoidable and complex condition impacting billions of individuals worldwide, posing a specific concern among younger generations, despite the progress of oral hygiene products. This deterioration occurs due to the acid demineralization of tooth enamel, leading to the loss of minerals from the enamel subsurface. The remineralisation of early enamel carious lesions could prevent the cavitation of teeth. The enamel protein amelogenin constitutes 90% of the total enamel matrix protein and plays a key role in the bio mineralisation process. The aim of this study is to investigate the self-assembly microstructure and reticulation behaviour of a newly developed bioactive hydrogel with leucine-rich amelogenin peptide (LRAP) intended for enamel remineralisation. SEM, AFM, UV-VIS, and FTIR analyses emphasize the ability of peptides to promote cell adhesion and the treatment of early carious lesions. In conclusion, short-chain peptides can be used in hydrogels for individual or professional use.

Biomaterials Functionalized with Inflammasome Inhibitors-Premises and Perspectives.

This review aimed at searching literature for data regarding the inflammasomes' involvement in the pathogenesis of oral diseases (mainly periodontitis) and general pathologies, including approaches to control inflammasome-related pathogenic mechanisms. The inflammasomes are part of the innate immune response that activates inflammatory caspases by canonical and noncanonical pathways, to control the activity of Gasdermin D. Once an inflammasome is activated, pro-inflammatory cytokines, such as interleukins, are released. Thus, inflammasomes are involved in inflammatory, autoimmune and autoinflammatory diseases. The review also investigated novel therapies based on the use of phytochemicals and pharmaceutical substances for inhibiting inflammasome activity. Pharmaceutical substances can control the inflammasomes by three mechanisms: inhibiting the intracellular signaling pathways (Allopurinol and SS-31), blocking inflammasome components (VX-765, Emricasan and VX-740), and inhibiting cytokines mediated by the inflammasomes (Canakinumab, Anakinra and Rilonacept). Moreover, phytochemicals inhibit the inflammasomes by neutralizing reactive oxygen species. Biomaterials functionalized by the adsorption of therapeutic agents onto different nanomaterials could represent future research directions to facilitate multimodal and sequential treatment in oral pathologies.

Salivary Biomarkers of Anti-Epileptic Drugs: A Narrative Review.

Saliva is a biofluid that reflects general health and that can be collected in order to evaluate and determine various pathologies and treatments. Biomarker analysis through saliva sampling is an emerging method of accurately screening and diagnosing diseases. Anti-epileptic drugs (AEDs) are prescribed generally in seizure treatment. The dose-response relationship of AEDs is influenced by numerous factors and varies from patient to patient, hence the need for the careful supervision of drug intake. The therapeutic drug monitoring (TDM) of AEDs was traditionally performed through repeated blood withdrawals. Saliva sampling in order to determine and monitor AEDs is a novel, fast, low-cost and non-invasive approach. This narrative review focuses on the characteristics of various AEDs and the possibility of determining active plasma concentrations from saliva samples. Additionally, this study aims to highlight the significant correlations between AED blood, urine and oral fluid levels and the applicability of saliva TDM for AEDs. The study also focuses on emphasizing the applicability of saliva sampling for epileptic patients.

In Vitro and In Vivo Characterisation of a Mucoadhesive Buccal Film Loaded with Doxycycline Hyclate for Topical Application in Periodontitis.

Mucoadhesive films loaded with doxycycline hyclate (Doxy Hyc), consisting of mixtures of hydroxypropylmethyl cellulose (HPMC) E3, K4 and polyacrylic acid (Carbopol 940), were prepared by casting method, aiming to design a formulation intended for application in the oral cavity. The obtained film formulations exhibited a Doxy Hyc content between 7.52 ± 0.42 and 7.83 ± 0.41%, which had adequate mechanical properties for application in the oral cavity and pH values in the tolerance range. The x-ray diffraction studies highlighted the amorphisation of Doxy Hyc in the preparation process and the antibiotic particles present on the surface of the films, identified in the TEM images, which ensured a burst release effect in the first 15 min of the in vitro dissolution studies, after which Doxy Hyc was released by diffusion, the data presenting a good correlation with the Peppas model, n < 0.5. The formulation F1, consisting of HPMC K4 combined with C940 in a ratio of 5:3, the most performing in vitro, was tested in vivo in experimentally-induced periodontitis and demonstrated its effectiveness in improving the clinical parameters and reducing the salivary levels of matrix metalloproteinase-8 (MMP-8). The prepared Doxy Hyc loaded mucoadhesive buccal film could be used as an adjuvant for the local treatment of periodontitis, ensuring prolonged release of the antibiotic after topical application.

Immunomodulatory Effect of Novel Electrospun Nanofibers Loaded with Doxycycline as an Adjuvant Treatment in Periodontitis.

The immunomodulatory effect of a novel biomaterial obtained through electrospinning, based on polylactic acid (PLA) and nano-hydroxyapatite (nano-HAP), loaded with doxycycline (doxy) was evaluated in an animal model. The treatment capabilities as a local non-surgical treatment of periodontitis was investigated on the lower incisors of Wistar rats, after the induction of localized periodontitis using the ligature technique. Following the induction of the disease, the non-surgical treatment of scaling and root planing was applied, in conjunction with the application of the new material. The results of the treatment were evaluated clinically, using the tooth mobility and gingival index scores, as well as histologically. The salivary concentrations of matrix metalloproteinase 8 (MMP-8) and plasmatic concentrations of interleukin 1 (IL-1), interleukin 6 (IL-6) and tumor necrosis factor alpha (TNF-α) were also monitored. Two weeks after the ligature application, the periodontal disease was successfully induced in rats. The application of the novel biomaterial obtained through electrospinning was proven to be more effective in improving the clinical parameters, while decreasing the salivary MMP-8 and plasmatic IL-1 and TNF-α concentrations, compared to the simple scaling and root planing. Thus, the novel electrospun biomaterial could be a strong candidate as an adjuvant to the non-surgical periodontal therapy.

Preparation and Characterization of Doxycycline-Loaded Electrospun PLA/HAP Nanofibers as a Drug Delivery System.

The present study aimed to prepare nanofibers by electrospinning in the system polylactic acid-hydroxyapatite-doxycycline (PLA-HAP-Doxy) to be used as a drug delivery vehicle. Two different routes were employed for the preparation of Doxy-containing nanofibers: Immobilization on the electrospun mat's surface and encapsulation in the fiber structure. The nanofibers obtained by Doxy encapsulation were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric (TG) and differential thermal analyses (DTA) and scanning electron microscopy (SEM). The adsorption properties of pure PLA and PLA-HAP nanofibers were investigated for solutions with different Doxy concentrations (3, 7 and 12 wt%). Moreover, the desorption properties of the active substance were tested in two different fluids, simulated body fluid (SBF) and phosphate buffer solution (PBS), to evidence the drug release properties. In vitro drug release studies were performed and different drug release kinetics were assessed to confirm the use of these nanofiber materials as efficient drug delivery vehicles. The obtained results indicate that the PLA-HAP-Doxy is a promising system for biomedical applications, the samples with 3 and 7 wt% of Doxy-loaded PLA-HAP nanofibers prepared by physical adsorption are the most acceptable membranes to provide prolonged release in PBS/SBF rather than an immediate release of Doxy.

Occlusal Splint Therapy Combined with Cranio-Temporomandibular Kinesiotherapy in Patients with Temporomandibular Disorders-A CBCT Study.

Occlusal splints are used as a non-invasive treatment for patients diagnosed with temporomandibular disorders (TMD). Another non-invasive treatment option for TMD patients is kinesiotherapy, which may be used alone or in conjunction with occlusal splint therapy. The aim of this study was to evaluate the changes in the intra-articular spaces of the temporomandibular joint (TMJ) after occlusal splint therapy combined with cranio-temporomandibular kinesiotherapy in TMD patients. Twenty-four patients (N = 24) diagnosed with TMD according to Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) were included. Cone beam computed tomography (CBCT) images were taken before and after treatment. The anterior, superior, posterior, and medial joint spaces were measured on the CBCT images, and the condylar ratio was calculated using Pullinger and Hollender's formula. Additionally, the thickness of the glenoid fossa (GFT), condylar medio-lateral widths (MLW), and condylar height (HCo) were measured. The condylar ratio was significantly higher after treatment (p = 0.049). The changes in dimensions of the anterior, superior, posterior and medial joint spaces were not statistically significant after treatment. No statistically significant differences were found in the dimensions of the GFT, MLW, and HCo post treatment. The condylar position did not shift anteriorly in a statistically significant way after occlusal splint therapy combined with cranio-temporomandibular kinesiotherapy in TMD patients.

Study on the Surface of Cobalt-Chromium Dental Alloys and Their Behavior in Oral Cavity as Cast Materials.

This study presents the correct processing of Co-Cr alloys as a method of preserving the properties of the materials as-cast, and therefore they can be safely placed in contact with the oral cavity tissues as resistance frameworks. The basic materials analyzed in this study were five commercial Co-Cr dental alloys with different components obtained in three processing steps. The analysis of the electrochemical behavior at the surface of the Co-Cr alloys was performed by electrochemical measurements: impedance spectroscopy (EIS), open circuit electrical potential (OCP), and linear polarization (LP). In terms of validation, all five alloys had a tendency to generate a stable oxide layer at the surface. After the measurements and the graphical representation, the alloy that had a higher percentage of tungsten (W) and iron (Fe) in composition showed a higher tendency of anodizing. After the application of the heat treatment, the disappearance of the hexagonal phase was observed, with the appearance of new phases of type (A,B)2O3 corresponding to some oxide compounds, such as Fe2O3, Cr2O3, (Cr,Fe)2O3, and CoMnO3. In conclusion, the processing of Co-Cr alloys by melting and casting in refractory molds remains a viable method that can support innovation, in the context of technology advance in recent years towards digitalization of the manufacturing process, i.e., the construction of prosthetic frameworks conducted by additive methods using Co-Cr powder alloy.

In Vitro Antimicrobial Effect of Novel Electrospun Polylactic Acid/Hydroxyapatite Nanofibres Loaded with Doxycycline.

The present study aimed to assess the in vitro antimicrobial effects of a novel biomaterial containing polylactic acid (PLA), nano-hydroxyapatite (nano-HAP) and Doxycycline (Doxy) obtained by electrospinning and designed for the non-surgical periodontal treatment. The antimicrobial activity of two samples (test sample, PLA-HAP-Doxy7: 5% PLA, nano-HAP, 7% Doxy and control sample, PLA-HAP: 5% PLA, nano-HAP) against two periodontal pathogens­Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis­was assessed using the Kirby−Bauer Disk Diffusion Susceptibility Test and compared with the effect of four antibiotics used as adjuvants in periodontal therapy: Amoxicillin, Ampicillin, Doxy and Metronidazole. The test sample (embedded with Doxy) showed higher inhibitory effects than commonly used antibiotics used in the treatment of periodontitis, while the control sample showed no inhibitory effects. Moreover, significant differences were observed between the inhibition zones of the two samples (p < 0.05). The Doxy-loaded PLA nanofibres had an antimicrobial effect against the periodontal pathogens. Based on these results, the novel biomaterial could be a promising candidate as adjuvant for the non-surgical local treatment in periodontitis.

Casting over Metal Method Used in Manufacturing Hybrid Cobalt-Chromium Dental Prosthetic Frameworks Assembles.

Cobalt-chromium (Co-Cr) alloys are the most widely used materials for removable and fixed dental prosthetic frameworks. The fitting accuracy between these components in dental prosthetic frameworks assembles (DPFAs) is largely influenced by the manufacturing method. This study presents a novel manufacturing method that combined two common techniques for obtaining one single framework: casting of Co-Cr inserts on top of parts previously manufactured by selective laser melting (SLM) of Co-Cr powder (CoM). Horizontal (n = 4) and vertical (n = 3) surfaces were microscopically analyzed (n = 770 count sum). The results revealed a high precision of the process and high fitting accuracy between the hybrid frameworks. The average distance measured between the frameworks in joined position was 41.08 ± 7.56 µm. In conclusion, the manufacturing of Co-Cr alloys DPFA using the CoM method reduced the deformation of hybrid frameworks and improved the joining accuracy between them.

The Role of Mesenchymal Stem Cells in the Treatment of a Chronic Rhinosinusitis-An In Vivo Mouse Model.

Objectives/Hypothesis: It is acknowledged that the treatment of chronic rhinosinusitis (CRS) represents an important challenge for rhinology and for social and economic life. At present, one of the most common treatments for CRS is represented by local corticosteroids followed by endoscopic sinus surgery (ESS). Starting from the example of the mesenchymal stem cell's (MSC) capacity to migrate and to modulate a real response in the nasal mucosa of an allergic rhinitis mouse model, we try to obtain a response in a CRS mouse model, using MSC derived by adipose tissue. The aim of this study is to demonstrate that the MSC can be used in CRS treatment and could change its priorities. Methods: Seventy female mice (6 MSC donor mice) were randomized in two stages of study, 32 Aspergillus fumigatus (Af) exposure mice (20 for histological comparison to 1st control mice and 12 for MSC administration, to CRS/MCS model) and 32 control mice (20 for histological comparison to CRS model and 12 for MSC administration and histological control to MSC model); in the first stage, the Aspergillus fumigatus (Af) CRS mouse model was targeted, in this section were included 64 (n = 32) mice (treated and control group). In order to assess the inflammation level (histological analysis), the animals were euthanized; in the second stage MSCs (1 × 106/animal) were administered intravenously to a total of 24 (n = 24) mice (12 mice from the exposed group and 12 mice from the second control group). Results: After 12 weeks of Af intranasal instillation, the inflammation parameters evaluated indicated a severe diffuse chronic inflammation, associated with diffuse severe hyperplasia and mature diffuse squamous metaplasia. The MSCs' injection via the ophthalmic vein induced important histopathological changes in the CRS experimental group, starting with the presence of MSCs in all samples and continuing with the important degenerative character of inflammation. Conclusions: MSC administration demonstrated a real improvement of CRS evolution on the CRS mouse model.

Oral appliance therapy in obstructive sleep apnea and snoring - systematic review and new directions of development.

Objective: Oral appliance therapy is a non-invasive treatment that offers a wide variety of oral devices for the treatment of obstructive sleep apnea (OSA). The present review focuses on the effectiveness of mandibular advancement devices for the treatment of OSA.Methods: A systematic review based on the PRISMA checklist was carried out. A detailed electronic database search was conducted using "Obstructive sleep apnea" AND "Oral appliance" AND "Dentistry" as keywords.Results: The initial search in the electronic databases resulted in a total of 262 papers. After the title and abstract analysis and full-text review, the number of eligible papers was reduced to 15.Conclusion: The mandibular advancement device is an effective treatment, improving the Apnea Hypopnea Index and the symptoms of patients with OSA in 92% of the subjects from all the investigated studies. The future may include the integration of a biosensor for the diagnosis and follow-up.Abbreviations: OSA: Obstructive sleep apnea; MADs: Mandibular advancement devices; CPAP: Continuous positive airway pressure; OAT: Oral appliance therapy; MRD: Mandibular repositioning devices; MAS: Mandibular advancement splints; MAA: Mandibular advancement appliances; OA: Oral appliances; AASM: American Academy of Sleep Medicine; AHI: Apnea-hypopnea index; EEG: Sleep-related breathing disorder SRBD; Electroencephalogram; EOG: Electrooculogram; ECG: Electrocardiogram; QOL: Quality of life; TMJ: Temporomandibular joint.