A stepwise route to domesticate rice by controlling seed shattering and panicle shape.

Asian rice (Oryza sativa L.) is consumed by more than half of the world's population. Despite its global importance, the process of early rice domestication remains unclear. During domestication, wild rice (Oryza rufipogon Griff.) acquired non-seed-shattering behavior, allowing humans to increase grain yield. Previous studies argued that a reduction in seed shattering triggered by the sh4 mutation led to increased yield during rice domestication, but our experiments using wild introgression lines show that the domesticated sh4 allele alone is insufficient for shattering loss in O. rufipogon. The interruption of abscission layer formation requires both sh4 and qSH3 mutations, demonstrating that the selection of shattering loss in wild rice was not as simple as previously suggested. Here we identified a causal single-nucleotide polymorphism at qSH3 within the seed-shattering gene OsSh1, which is conserved in indica and japonica subspecies but absent in the circum-aus group of rice. Through harvest experiments, we further demonstrated that seed shattering alone did not significantly impact yield; rather, yield increases were observed with closed panicle formation controlled by SPR3 and further augmented by nonshattering, conferred by integration of sh4 and qSH3 alleles. Complementary manipulation of panicle shape and seed shattering results in a mechanically stable panicle structure. We propose a stepwise route for the earliest phase of rice domestication, wherein selection of visible SPR3-controlled closed panicle morphology was instrumental in the sequential recruitment of sh4 and qSH3, which together led to the loss of shattering.

The Differences of Gambling-Related Harms Among Low-Investment and Normal-Investment Pachinko/Pachislot Players in Japan: A Cross Sectional Study.

Pachinko and pachislot are popular types of gambling activities in Japan. Prior studies in Japan have reported a concerning prevalence of problem gambling among adult players. While these studies have identified various gambling-related harms, Japanese research on harm-minimization strategies is scarce. Therefore, the present study aimed to compare differences of gambling-related harms among normal-, half-, and quarter-pachi players to the usefulness of low-investment pachinko and pachislot as a harm-reduction strategy. We considered gamblers who played games that cost the typical amount of money to be "normal-pachi players." Those who played low-investment games were categorized as "half-pachi players" and "quarter-pachi players," reflecting those who played games at half or one quarter the cost of a typical machine, respectively. To assess the harm-reduction effect, a one-way ANCOVA was conducted to compare the impact of the groups (normal-pachi players [n = 101], half-pachi players [n = 104], and quarter-pachi players [n = 100]) on dependent variables, namely the number of days players had gambled during the prior month; total time and amount of money spent on gambling; debts caused by gambling; gambling severity; cognitive distortion; depressive symptoms; and problems in work, family, and social life. We demonstrated that the amount of money spent by quarter-pachi players on gambling during the past month was lower than that of normal-pachi players. However, we did not find significant differences with respect to any other gambling-related harms among normal-, half-, and quarter-pachi players. Low-investment pachinko and pachislot players spends less the amount of money spent on gambling. Low-investment pachinko and pachislot would thus partly act as a harm-minimization strategy. Moreover, the results of the present study indicate that the problems at work affect various outcomes for gamblers. Given that 90% of the participants in this study were employed, the results of this study may have important implications for employed gamblers.

Acromioclavicular joint instability on cross-body adduction view: the biomechanical effect of acromioclavicular and coracoclavicular ligaments sectioning.

BACKGROUND: The acromioclavicular (AC) and coracoclavicular (CC) ligaments are important stabilizers of the AC joint. We hypothesized that AC and trapezoid ligament injuries induce AC joint instability and that the clavicle can override the acromion on cross-body adduction view even in the absence of conoid ligament injury. Accordingly, we investigated how sectioning the AC and CC ligaments contribute to AC joint instability in the cross-body adduction position. METHODS: Six fresh-frozen cadaveric shoulders were used in this study, comprising five male and one female specimen, with a mean age of 68.7 (range, 51-87) years. The left side of the trunk and upper limb, and the cervical and thoracic vertebrae and sternum were firmly fixed with an external fixator. The displacement of the distal end of the clavicle relative to the acromion was measured using an electromagnetic tracking device. We simulated AC joint dislocation by the sequential resection of the AC ligament, AC joint capsule, and CC ligaments in the following order of stages. Stage 0: Intact AC and CC ligaments and acromioclavicular joint capsule; stage 1: Completely sectioned AC ligament, capsule and joint disc; stage 2: Sectioned trapezoid ligament; and stage 3: Sectioned conoid ligament. The superior clavicle displacement related to the acromion was measured in the horizontal adduction position, and clavicle overriding on the acromion was assessed radiologically at each stage. Data were analyzed using a one-way analysis of variance and post-hoc tests. RESULTS: Superior displacement was 0.3 mm at stage 1, 6.5 mm at stage 2, and 10.7 mm at stage 3. On the cross-body adduction view, there was no distal clavicle overriding at stages 0 and 1, and distal clavicle overriding was observed in five cases (5/6: 83%) at stage 2 and in six cases (6/6: 100%) at stage 3. CONCLUSION: We found that AC and trapezoid ligament sectioning induced AC joint instability and that the clavicle could override the acromion on cross-body adduction view regardless of conoid ligament sectioning. The traumatic sections of the AC and trapezoid ligament may lead to high grade AC joint instability, and the distal clavicle may subsequently override the acromion.

Exploring the size of reference population for expected accuracy of genomic prediction using simulated and real data in Japanese Black cattle.

BACKGROUND: Size of reference population is a crucial factor affecting the accuracy of prediction of the genomic estimated breeding value (GEBV). There are few studies in beef cattle that have compared accuracies achieved using real data to that achieved with simulated data and deterministic predictions. Thus, extent to which traits of interest affect accuracy of genomic prediction in Japanese Black cattle remains obscure. This study aimed to explore the size of reference population for expected accuracy of genomic prediction for simulated and carcass traits in Japanese Black cattle using a large amount of samples. RESULTS: A simulation analysis showed that heritability and size of reference population substantially impacted the accuracy of GEBV, whereas the number of quantitative trait loci did not. The estimated numbers of independent chromosome segments (Me) and the related weighting factor (w) derived from simulation results and a maximum likelihood (ML) approach were 1900-3900 and 1, respectively. The expected accuracy for trait with heritability of 0.1-0.5 fitted well with empirical values when the reference population comprised > 5000 animals. The heritability for carcass traits was estimated to be 0.29-0.41 and the accuracy of GEBVs was relatively consistent with simulation results. When the reference population comprised 7000-11,000 animals, the accuracy of GEBV for carcass traits can range 0.73-0.79, which is comparable to estimated breeding value obtained in the progeny test. CONCLUSION: Our simulation analysis demonstrated that the expected accuracy of GEBV for a polygenic trait with low-to-moderate heritability could be practical in Japanese Black cattle population. For carcass traits, a total of 7000-11,000 animals can be a sufficient size of reference population for genomic prediction.

Comparative evaluation of microbial profiles of oral samples obtained at different collection time points and using different methods.

OBJECTIVES: Recently, the oral microbiome has been found to be associated with oral and general health status. Although various oral sample collection protocols are available, the potential differences between the results yielded by these protocols remain unclear. In this study, we aimed to determine the effects of different time points and methods of oral sample collection on the outcomes of microbiome analysis. MATERIALS AND METHODS: Oral samples were collected from eight healthy individuals at four different time points: 2 h after eating, immediately after teeth brushing, immediately after waking up, and 2 h after eating on the subsequent day. Four methods of saliva collection were evaluated: spitting, gum chewing, cotton swab, and oral rinse. Oral microbiomes of these samples were compared by analyzing the bacterial 16S rRNA gene sequence data. RESULTS: The oral microbial composition at the genus level was similar among all sample collection time points and methods. Alpha diversity was not significantly different among the groups, whereas beta diversity was different between the spitting and cotton swab methods. Compared with the between-subject variations, the weighted UniFrac distances between the groups were not minor. CONCLUSIONS: Although the oral microbiome profiles obtained at different collection time points and using different methods were similar, some differences were detected. CLINICAL RELEVANCE: The results of the present study suggest that although all the described protocols are useful, comparisons among microbiomes of samples collected by different methods are not appropriate. Researchers must be aware of the issues regarding the impact of saliva collection methods.

Glenoid bone resorption after Bankart repair: finite element analysis of postoperative stress distribution of the glenoid.

BACKGROUND: There are various modifications of the Bankart repair, and postoperative changes to the glenoid morphology after the repair are reported. Among the various procedures performed, a decrease in the lateral glenoid diameter might be related to the surgery that involves removal of the articular cartilage and repair of the labrum-anterior inferior glenohumeral ligament complex on the glenoid surface. This is in contrast to cases without significant bony Bankart lesions that are not on the edge of the glenoid. Thus, this study aimed to compare glenoid rim stress after Bankart repair using 2 methods of finite element analysis: a method of removing the anteroinferior cartilage and repairing the glenohumeral ligament complex on the glenoid and a method of preserving the cartilage and repairing the glenohumeral ligament complex on the glenoid edge. METHODS: Five preoperative computed tomography scans of patients with traumatic anterior instability who underwent arthroscopic Bankart repair were used. Two models simulating different surgical procedures were created as follows: in model G, a 5-mm-thick cartilage on the glenoid rim was removed between 2 and 7 o'clock, and the glenohumeral ligament complex was repaired on the medial edge of the glenoid bone where the cartilage was removed. In model E, the cartilage on the glenoid rim was not removed, and the glenohumeral ligament complex was repaired on the glenoid edge. The load stresses on the anteroinferior area of the glenoid after Bankart repair with models G and E were measured using finite element analysis. RESULTS: The stress on the glenoid at 3-4 o'clock was 3.16 MPa in model G and 6.42 MPa in model E (P = .043). The stress at 4-5 o'clock was 1.68 MPa in model G and 4.53 MPa in model E (P = .043). The stress at 5-6 o'clock was 2.26 MPa in model G and 3.93 MPa in model E (P = .043). CONCLUSION: Significantly lower load stresses were observed at the anteroinferior rim of the glenoid in model G than in model E.

Detailed Inventory of the Evaporative Emissions from Parked Gasoline Vehicles and an Evaluation of Their Atmospheric Impact in Japan.

A detailed inventory was taken of evaporative emissions from parked gasoline vehicles in the Kanto region of Japan, 2015, based on the theoretical model to evaluate the amount of evaporative emissions. The inventory showed that evaporative emissions were high in metropolitan and urban areas because of the large populations in these areas and the high vehicle parking frequency. Using the new inventory, the sensitivity of evaporative emissions to the concentration of tropospheric ozone and secondary organic aerosol was evaluated using the chemical transport modeling solver, the community multiscale air quality modeling system (CMAQ), coupled with the weather research and forecasting (WRF) model. The calculation results showed that the evaporative emissions from permeation through fuel related parts were more significant in the generation of the tropospheric ozone than those from fuel tank venting. This was because the permeation emissions included a high proportion of high maximum incremental reactivity value components, such as aromatics. Neither of the evaporative emission types were significant secondary organic aerosol generators. Whole reduction of the evaporative emissions contributed an approximate 3 ppb decrease in tropospheric ozone in urban areas during the daytime. This information will contribute to the volatile organic compound (VOC) management strategy employed by governments worldwide.

Trimethyl-Substituted Carbamate as a Versatile Self-Immolative Linker for Fluorescence Detection of Enzyme Reactions.

Self-immolative linker is a useful building block of molecular probes, with broad applications in the fields of enzyme activity analysis, stimuli-responsive material science, and drug delivery. This manuscript presents N-methyl dimethyl methyl (i.e., trimethyl) carbamate as a new class of self-immolative linker for the fluorescence detection of enzyme reactions. The trimethyl carbamate was shown to spontaneously undergo intramolecular cyclization upon formation of a carboxylate group, to liberate a fluorophore with the second time rapid reaction kinetics. Interestingly, the auto-cleavage reaction of trimethyl carbamate was also induced by the formation of hydroxyl and amino groups. Fluorescent probes with a trimethyl carbamate could be applicable for fluorescence monitoring of the enzyme reactions catalyzed by esterase, ketoreductase, and aminotransferase, and for fluorescence imaging of intracellular esterase activity in living cells, hence demonstrating the utility of this new class of self-immolative linker.

Silicate-substituted strontium apatite nano coating improves osteogenesis around artificial ligament.

BACKGROUND: Treatment of anterior cruciate ligament injuries commonly involves the use of polyethylene terephthalate (PET) artificial ligaments for reconstruction. However, the currently available methods require long fixation periods, thereby necessitating the development of alternative methods to accelerate the healing process between tendons and bones. Thus, we developed and evaluated a novel technique that utilizes silicate-substituted strontium (SrSiP). METHODS: PET films, nano-coated with SrSiP, were prepared. Bone marrow mesenchymal cells (BMSCs) from femurs of male rats were cultured and seeded at a density of 1.0 × 104/cm2 onto the SrSiP-coated and non-coated PET film, and subsequently placed in an osteogenic medium. The osteocalcin concentration secreted into the medium was compared in each case. Next, PET artificial ligament, nano-coated with SrSiP, were prepared. BMSCs were seeded at a density of 4.5 × 105/cm2 onto the SrSiP-coated, and non-coated artificial ligament, and then placed in osteogenic medium. The osteocalcin and calcium concentrations in the culture medium were measured on the 8th, 10th, 12th, and 14th day of culture. Furthermore, mRNA expression of osteocalcin, alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP2), and runt-related transcription factor 2 (Runx2) was evaluated by qPCR. We transplanted the SrSiP-coated and non-coated artificial ligament to the tibiae of mature New Zealand white rabbits. Two months later, we sacrificed them and histologically evaluated them. RESULTS: The secretory osteocalcin concentration in the medium on the film was significantly higher for the SrSiP group than for the non-coated group. Secretory osteocalcin concentration in the medium on the artificial ligament was also significantly higher in the SrSiP group than in the non-coated group on the 14th day. Calcium concentration on the artificial ligament was significantly lower in the SrSiP group than in the non-coated group on the 8th, 10th, 12th, and 14th day. In qPCR as well, OC, ALP, BMP2, and Runx2 mRNA expression were significantly higher in the SrSiP group than in the non-coated group. Newly formed bone was histologically found around the artificial ligament in the SrSiP group. CONCLUSIONS: Our findings demonstrate that artificial ligaments using SrSiP display high osteogenic potential and thus may be efficiently used in future clinical applications.

Identifying Differences Between a Straight Face and a Posed Smile Using the Homologous Modeling Technique and the Principal Component Analysis.

Recently, a homologous modeling method was developed to simulate 3D human body forms, which can visualize principal component analysis (PCA) results and facilitate its detailed comparison with results of previous method. Herein, we aimed to construct a homologous model of the face to identify differences between a straight face and a posed smile. Thirty-eight volunteers (19 males and 19 females, 38 straight faces and 38 posed smiles) with no medical history associated with a posed smile were enrolled. Three-dimensional images were constructed using the Homologous Body Modeling software and the HBM-Rugle; 9 landmarks were identified on the 3D-model surfaces. The template model automatically fitted into an individually scanned point cloud of the face by minimizing external and internal energy functions. Faces were analyzed using PCA; differences between straight faces and posed smiles were analyzed using paired t tests. Contribution of the most important principal component was 23.8%; 8 principal components explained >75% of the total variance. A significant difference between a straight face and a posed smile was observed in the second and the fourth principal components. The second principal component images revealed differences between a straight face and a posed smile and changes around the chin area with regard to length, shape, and anteroposterior position. Such changes were inclusive of individual differences. However, the fourth principal component image only revealed differences between a straight face and a posed smile; observed differences included simultaneous shortening of upper and lower eyelid length, evaluation of the nasal ala ase, swelling of the cheek area, and elevation of the mouth angle. Although these results were clinically apparent, we believe that this article is the first to statistically verify the same.Consequently, the homologous model technique and PCA are useful for evaluation of the facial soft-tissue changes.

Removal of a Fixation Screw That Was Forced Into the Postsuperior Maxillary Sinus Wall: Case Report.

We have encountered a rare case in which the subject underwent maxillary sinus floor elevation at another hospital, and a screw to fix the grafted bone substitute was forced into the maxillary sinus and intruded into the bone. Various different foreign bodies have been reported as being forced into the maxillary sinus due to dental treatment, and these foreign bodies are often retained on the maxillary sinus mucous membrane. However, no reports have described a screw forced in and intruded into the peculiar position in the bone, as seen in the present case, which we report here with additional discussion.

The mere exposure effect for visual image.

Mere exposure effect refers to a phenomenon in which repeated stimuli are evaluated more positively than novel stimuli. We investigated whether this effect occurs for internally generated visual representations (i.e., visual images). In an exposure phase, a 5 × 5 dot array was presented, and a pair of dots corresponding to the neighboring vertices of an invisible polygon was sequentially flashed (in red), creating an invisible polygon. In Experiments 1, 2, and 4, participants visualized and memorized the shapes of invisible polygons based on different sequences of flashed dots, whereas in Experiment 3, participants only memorized positions of these dots. In a subsequent rating phase, participants visualized the shape of the invisible polygon from allocations of numerical characters on its vertices, and then rated their preference for invisible polygons (Experiments 1, 2, and 3). In contrast, in Experiment 4, participants rated the preference for visible polygons. Results showed that the mere exposure effect appeared only when participants visualized the shape of invisible polygons in both the exposure and rating phases (Experiments 1 and 2), suggesting that the mere exposure effect occurred for internalized visual images. This implies that the sensory inputs from repeated stimuli play a minor role in the mere exposure effect. Absence of the mere exposure effect in Experiment 4 suggests that the consistency of processing between exposure and rating phases plays an important role in the mere exposure effect.

Reconstruction of the Alveolar Bone Using Bone Augmentation With Selective Laser Melting Titanium Mesh Sheet: A Report of 2 Cases.

Bone augmentation is used to supplement bone defects during dental implant treatment. In this technique, the area filled with bone prosthetic material is covered with an artificial space-making device or titanium mesh sheet, which must be manually adapted to the bone defect during the procedure before being fixed in place. Selective laser melting (SLM) method can be used to preadapt the titanium mesh sheet based on preoperative CT data. This method enables shorter surgery times compared with conventional titanium mesh sheet methods, as well as regeneration of an ideal alveolar bone shape. Here, we present 2 cases of bone augmentation using the SLM titanium mesh sheet method. The postoperative course was without complications in both cases; neither patient experienced mesh exposure or infection during healing. The SLM titanium mesh sheet method should be considered as a new and effective bone augmentation method.

New Bone Formation Process Using Bio-Oss and Collagen Membrane for Rat Calvarial Bone Defect: Histological Observation.

PURPOSE: We carried out guided bone regeneration of cranial bone defects in rats using the bovine bone substitute Bio-Oss and a collagen membrane and performed histological observations of the bone repair process. MATERIALS AND METHODS: Bone defects were created in the cranial bones of 30 15-week-old Sprague-Dawley rats. We made 3 groups. A is unfilled, B is Bio-Oss, and C is Bio-Oss plus a collagen membrane. At 4 or 8 weeks postoperatively, tissue samples were taken. The Kawamoto technique was used for histological evaluation. RESULTS: There was no new bone formation in group A. In groups B and C, new bone formation was evident around the Bio-Oss. In group C, new bone formation was evident in the centers of the bone defects, detached from the cut edge of the cranial bone. CONCLUSION: Our results suggested that the Bio-Oss acts as a scaffold for bone repair, and the use of a collagen membrane may anchor the Bio-Oss closely to the cranial bone and assist the bone repair response.

Sense of agency in continuous action: Assistance-induced performance improvement is self-attributed even with knowledge of assistance.

In a task involving continuous action to achieve a goal, the sense of agency increases with an improvement in task performance that is induced by unnoticed computer assistance. This study investigated how explicit instruction about the existence of computer assistance affects the increase of sense of agency that accompanies performance improvement. Participants performed a continuous action task in which they controlled the direction of motion of a dot to a goal by pressing keys. When instructions indicated the absence of assistance, the sense of agency increased with performance improvement induced by computer assistance, replicating previous findings. Interestingly, this increase of sense of agency was also observed even when instructions indicated the presence of assistance. These results suggest that even when a plausible cause of performance improvement other than one's own action exists, the improvement can be misattributed to one's own control of action, resulting in an increased sense of agency.

Humeral bone resorption after anatomic shoulder arthroplasty using an uncemented stem.

BACKGROUND: Bone resorption around the femoral stem after total hip arthroplasty is a well-known phenomenon. However, only a few studies have evaluated bone resorption after shoulder arthroplasty. This study investigated the prevalence of humeral bone resorption after different shoulder arthroplasty procedures. METHODS: The study included 147 shoulders that underwent total shoulder arthroplasty (TSA) or humeral head replacement (HHR) with an uncemented humeral stem from November 2008 to May 2015 and were monitored for more than 1 year. The prevalence of humeral bone resorption and risk factors were investigated. RESULTS: The most advanced grade of bone resorption, grade 0, occurred in 21 shoulders (14.3%). Grade 1 bone resorption occurred in 10 (6.8%), grade 2 in 28 (19.0%), grade 3 in 61 (41.5%), and grade 4 in 27 (18.4%). High occurrence of bone absorption was observed in zones 1, 2, and 7. Grade 4 bone resorption did not occur in zones 3 and 5. HHR, on-growth type stem coating, and occupation ratio were significant independent risk factors for grade ≥3 bone resorption, whereas female sex and HHR were significant independent risk factors for grade 4. CONCLUSION: Bone resorption was observed in 126 shoulders (85.7%), and full-thickness cortical bone resorption occurred in 27 shoulders (18.4%). Bone resorption was frequently observed at the greater tuberosity, lateral diaphysis, and calcar region (zones 1, 2, and 7). Significant risk factors included female sex, HHR with rotator cuff reconstruction, on-growth type stem coating, and high occupation ratio of the implant.

Analysis of trabecular bone microstructure in osteoporotic femoral heads in human patients: in vivo study using multidetector row computed tomography.

BACKGROUND: Lag screw position is very important in the treatment of intertrochanteric femoral fracture to prevent complications such as screw cut-out. Current studies recommend central or inferior placement of the lag screw on the anteroposterior radiograph, and central placement on the lateral radiographs. These reports are based on radiographic evaluation, but few studies have investigated the importance of bone quality at the site of lag screw placement. In this study, we used multidetector row computed tomography (MDCT) to perform in vivo evaluation of the bone microstructure of the femoral head in patients with intertrochanteric femoral fractures. METHODS: This study was approved by the Ethics Committee of Okanami General Hospital. MDCT images were obtained in our hospital from ten patients who had sustained intertrochanteric femoral fracture. Patients who needed computed tomography to confirm fracture morphology were included. We defined six areas as regions of interest (ROI): ROI 1-3 were defined as the femoral head apex area, and ROI 4-6 were defined as the femoral neck area. Trabecular microstructure parameters, including mean bone volume to total volume (BV/TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), and structure model index (SMI), were evaluated with bone analysis software (TRI/3D-BON). Statistical analyses were performed using EZR software; each parameter among the ROIs was statistically evaluated by analysis of variance (ANOVA) and Tukey's test. Statistical significance was established at p < 0.05. RESULTS: In the apical area, all parameters indicated that ROI 1 (superior) had the highest bone quality and ROI 2 (central) was higher in bone quality than ROI 3 (inferior). In the femoral neck, all parameters indicated that bone quality was significantly greater in ROI 6 (inferior) than ROI 5 (central). DISCUSSION AND CONCLUSIONS: We could evaluate bone quality with clinical MDCT in vivo. Bone quality in the central area of the femoral head apical was greater than in the inferior area, and bone quality in the inferior area of the femoral neck was greater than in the central area. Recognizing which area of femoral head has greater bone quality may lead to a better clinical result in treating intertrochanteric femoral fracture.

Bone marrow stimulation at the footprint of arthroscopic surface-holding repair advances cuff repair integrity.

BACKGROUND: Bone marrow stimulation (BMS) at the footprint of arthroscopic rotator cuff repair has not been fully evaluated according to the preoperative tear size and surgical technique. In this study, we investigated the effect of BMS on cuff repair integrity after an arthroscopic surface-holding (ASH) repair. MATERIALS AND METHODS: A total of 111 patients (mean age, 64.5 years) with chronic rotator cuff tears who underwent treatment by the ASH method with BMS by drilling of multiple holes at the footprint (67 shoulders) or without BMS (44 shoulders) were studied, and all patients were observed prospectively. Sugaya's classification was used to evaluate cuff integrity by postoperative magnetic resonance imaging, with types IV and V classified as rotator cuff retears. RESULTS: The mean scores for cuff integrity were 2.2 ± 0.2 and 1.7 ± 0.2 in the non-BMS and BMS groups, respectively. The mean scores were similar between the 2 groups for medium tears; however, scores for large-massive tears were significantly lower in the BMS group. The overall retear rate was 23.9% in the non-BMS group and 9.1% in the BMS group, and the distribution of repair types differed significantly. For large-massive tears, the retear rate was much higher in the non-BMS group (28.6%) than in the BMS group (4.5%), although the rates for medium tears were comparable between the 2 groups. CONCLUSIONS: These findings demonstrate that applying BMS to the footprint during ASH repair results in improved cuff repair integrity, particularly in large-massive tears, and suggest the importance of biologic treatment for rotator cuff healing after arthroscopic rotator cuff repair.

In vivo microstructural analysis of the humeral greater tuberosity in patients with rotator cuff tears using multidetector row computed tomography.

BACKGROUND: In arthroscopic surgery, the suture anchor technique has become popular for rotator cuff repair. Preoperative evaluation of the bone microstructure is of utmost importance because, especially in elderly patients, osteoporotic changes may cause anchor pullout, which results in failure of rotator cuff repair. Many groups have reported humeral microstructural analysis; however, most studies were experiments using porcine specimens or human cadavers. In this study, we used multidetector row computed tomography to successfully perform in vivo evaluation of the bone microstructure of the humeral greater tuberosity in patients with rotator cuff tears. METHODS: Ten patients were examined. Regions of interest were defined in six quadrants of the greater tuberosity (medial, lateral, and far lateral rows of the anterior and posterior areas). The local bone mineral density and the trabecular microstructural parameters, including the mean bone volume to total volume (BV/TV), trabecular thickness, trabecular separation, and structure model index (SMI), were measured using bone analysis software. RESULTS: The BV/TV of the posteromedial region was highest and the SMI of the posteromedial region was lowest. These findings suggest that the bone quality of the posteromedial portion is the highest within the greater tuberosity. CONCLUSION: Because the bone quality may be correlated with the pullout strength of suture anchors, our method can help to understand the individual and regional variance in bone quality and may lead to the creation of personalized surgical protocols.

Superficial blood flow of the superior labrum associated with rotator cuff tear using laser Doppler flowmeter.

INTRODUCTION: Superior labrum anterior and posterior (SLAP) lesions due to overuse by repeated pitching motion and trauma are often noted and usually. However, shoulder disorders with a chronic course are often accompanied by SLAP lesions. SLAP lesions are frequently observed during arthroscopic surgery of the shoulder joint for rotator cuff tear in middle-aged and elderly individuals, suggesting the involvement of factors other than pitching motion and traumatic events in the pathogenesis. We considered that blood flow in the labrum is altered. The purpose of this study was to clarify the superficial blood flow in the superior labrum during arthroscopic surgery of the rotator cuff tear and investigate whether it is altered with labrum injury. MATERIALS AND METHODS: We evaluated 33 subjects with a mean age of 55.1 years who underwent arthroscopic surgery for partial or complete rotator cuff tears. The blood flow measurement site for the superior labrum was set at the supraglenoid tubercle attachment site, and blood flow was measured twice using laser Doppler flowmeter. The mean was calculated and compared among the normal labrum and type 1 SLAP lesions. RESULTS: The morphology of the labrum was normal in 16 subjects, and 17 subjects had type 1 SLAP lesions. The mean blood flow was 1.75 ml/min/100 g in subjects with a normal labrum; however, in subjects with type 1 SLAP lesions, blood flow was 1.32 ml/min/100 g, showing significant differences (P < 0.01). CONCLUSION: Superficial blood flow in the superior labrum of the shoulder with rotator cuff tear was measured using laser Doppler flowmetry. The blood flow in type 1 SLAP lesions was lower than that in the normal labrum.