Glenoid Track Revisited.

The risk of Hill-Sachs lesion (HSL) to cause instability depends not only on the HSL but also on the glenoid size. Clinically, the only method to assess the risk of instability considering the dynamic interaction of both, the HSL together with the glenoid bone loss, is the glenoid track concept. Since it was introduced in a cadaveric study, its clinical efficacy and validity have been reported in the literature. Sometimes, the medial margin of the footprint (lateral margin of the glenoid track) is difficult to identify when a HSL is overriding the footprint. In such cases, we propose a method to draw an imaginary line connecting two landmarks. Although 3D-CT is the most accurate and widely used method to assess on/off-track lesions, our interest gradually is shifting towards MRI, which has no radiation concern. The current MR method is still under way. There are various risk factors influencing the recurrent instability after surgery. The glenoid track concept deals with only one of these factors, i.e., instability caused by bony lesions. Therefore, the following two issues are important: 1) how to assess the glenoid track precisely and 2) how to incorporate other risk factors into consideration. The former can be achieved by obtaining the custom-made glenoid track width using not the fixed value of 83%, but more individualized value obtained by measuring the active horizontal extension angle of the opposite shoulder in the sitting position. At the same time, the gray zone (peripheral-track lesion) needs to be clearly defined. The latter can be achieved by incorporating the risk factors other than the bony lesions. One example is the glenoid track instability management score (GTIMS), a combination of the glenoid track concept and the instability severity index (ISI) score. This new scoring system is expected to increase the predictive potential of the scoring system, and accordingly to enhance clinical decision making.

When and how much does the muscle strength recover after arthroscopic superior capsular reconstruction?

BACKGROUND: Recently, arthroscopic superior capsular reconstruction (SCR) has been performed for irreparable large to massive rotator cuff tears and excellent clinical results have been reported. Although the muscle strength is reported to recover, it has not yet been clarified when and how much it recovers. The purpose of this study was to determine the recovery pattern of muscle strength after SCR. METHODS: We retrospectively reviewed 35 patients (mean age, 65 years) who met the following inclusion criteria: (1) patients with large to massive irreparable tears of the rotator cuff including the supraspinatus and infraspinatus tendons; (2) those with severe muscle atrophy and fatty change; (3) those who underwent assessment of muscle quality and strength by magnetic resonance imaging and dynamometry at 6 months, 1 year, and 2 years; (4) those with a minimum follow-up period of 2 years; and (5) those without severe osteoarthritis. The isometric muscle strength of scaption (ie, scapular-plane elevation), internal rotation, and external rotation in adduction was measured twice for each motion by a dynamometer. RESULTS: Relative to the muscle strength on the uninvolved side, the involved side showed 61% ± 21% in scaption, 63% ± 20% in external rotation, and 103% ± 29% in internal rotation at 2 years after surgery. Whereas no significant differences were observed between the 1-year and 2-year follow-up assessments, a significant difference in muscle strength of scaption was found between 6 months and 1 year (P = .0174). Graft retear was seen in 5 cases (14%). There was a trend that the muscle strength of scaption and external rotation in the no-retear group was greater than that in the retear group despite no significant difference (P = .0717 and P = .0824, respectively). CONCLUSION: The recovery of the muscle strength after SCR was observed until 1 year after surgery, and the muscle strength of scaption and external rotation returned to 60% of that on the uninvolved side at 2 years.

Location and Size of the Reverse Hill-Sachs Lesion in Patients with Traumatic Posterior Shoulder Instability.

BACKGROUND: In patients with traumatic posterior shoulder instability, little is known about the precise location and size of the reverse Hill-Sachs lesion. METHODS: Forty-nine shoulders of 47 patients with traumatic posterior instability were included in this study based on the following inclusion criteria: 1) a primary or recurrent traumatic posterior shoulder dislocation, and 2) the initial event was caused by trauma. Patients were excluded if they had: 1) no history of trauma, 2) prior shoulder surgery, 3) no CT examination, or 4) seizure cases. Three-dimensional images of the humerus reconstructed from CT images were reviewed using an image analysis software. The location and size of the reverse Hill-Sachs lesion were measured and described on a clock face on the humeral head. RESULTS: The reverse Hill-Sachs lesion was observed in 25 of 49 shoulders (51%). The reverse Hill-Sachs lesions were located between 1:37 and 2:48. The depth of the reverse Hill-Sachs lesion (mean ± SD) was 5.8 ± 2.2 mm. The extent of the reverse Hill-Sachs lesion was 35° ± 12°. The average orientation of the reverse Hill-Sachs lesion, represented by an angle measured from the 12 o'clock position, was 64° ± 12° and pointing towards 2:09 on a clock face. Length and width of reverse Hill-Sachs lesions were 9.7 ± 4.7 mm, 11.1 ± 3.6 mm, respectively. CONCLUSION: The reverse Hill-Sachs lesion was a semicircular compression fracture located on the anteromedial aspect of the humeral head. Compared with shoulders with anterior shoulder instability, the humeral defect was smaller and located more inferiorly in shoulders with posterior instability.

The quantification of muscle activities during arm elevation following reverse shoulder arthroplasty or superior capsular reconstruction for irreparable rotator cuff tears using positron emission tomography.

BACKGROUND: Reverse shoulder arthroplasty (RSA) and superior capsular reconstruction (SCR) are recognized as surgical options for an irreparable rotator cuff tear. However, the postoperative changes of the muscle activity patterns remain unclear. The purpose of this study was to investigate the quantified muscle activities on shoulder elevation in patients treated with RSA or SCR using fluorine-18-labelled fluorodeoxyglucose-positron emission tomography. METHODS: Asymptomatic shoulders that underwent RSA or SCR and those without a rotator cuff tear were analyzed as the RSA, SCR, and control groups. All subjects underwent shoulder elevation exercise, followed by a fluorine-18-labelled fluorodeoxyglucose-positron emission tomography examination. Using previously established methods to quantify the uptake of each muscle on positron emission tomography images, the standard uptake values (SUVs) for 16 portions of the deltoid, rotator cuff, and periscapular muscles were obtained to compare the muscle activity patterns among 3 groups. RESULTS: The deltoid muscle showed the most characteristic differences according to the surgeries. The mean SUVs of the anterior, middle, and posterior deltoid were 3.3, 3.7, and 1.5 for the RSA group; 2.7, 4.2, and 1.5 for the SCR group; and 1.3, 2.0, and 0.9 for the control group, respectively. In comparison to the control group, both the RSA and SCR groups showed significantly increased SUVs at all portions of the deltoid muscle. The RSA group showed similar SUVs for the anterior and middle deltoid, whereas the SCR and control groups showed greatest SUVs at the middle deltoid. In addition, the serratus anterior, levator scapulae, and upper portion of the trapezius in the RSA group showed greater SUVs than in the control group. CONCLUSION: The deltoid muscle showed increased activity in the RSA and SCR groups. The middle deltoid was mainly used in the SCR group, whereas the anterior and middle deltoid, as well as the upward rotator muscles of the scapula, were mainly used in the RSA group.

A stabilizing role of the glenoid labrum: the suction cup effect.

BACKGROUND: The glenoid labrum acts as a bumper, deepening glenoid concavity and amplifying the concavity-compression mechanism, and serves as the scapular attachment for glenohumeral ligaments. The role of the posterosuperior labrum in anteroinferior glenohumeral stability, and the role of the anterior labrum in posterior stability has been debated. The purpose of this study was to quantify the contribution of anteroinferior and posterosuperior labral tears to loss of glenohumeral stability in multiple directions. METHODS: Fourteen fresh-frozen cadaveric shoulders were tested on a custom stability ratio measurement apparatus. The peak force that was required to translate the humeral head in anterior, anteroinferior, posterior, and posteroinferior directions was measured under 5 conditions: intact labrum (n = 14), anteroinferior labral tear (n = 7), posterosuperior labral tear (n = 7), combined labral tear (n = 14), and no labrum (n = 14). The stability ratio was defined as the peak translational force divided by the compressive force. Within force-translation curves, we defined the suction cup effect as the force required to release the negative pressure created by an intact labrum. RESULTS: The suction cup effect was usually present with the intact labrum and always disappeared after removal of the labrum for anterior (100% vs. 0%) and posterior (86% vs. 0%) translations (P < .001). After creation of an anteroinferior labral tear, the stability ratio for posterior direction decreased (P < .001) and the suction cup effect disappeared (P < .001). After creation of a posterosuperior labral tear, stability ratios in the anterior and anteroinferior directions decreased (P ≤ .006) and the suction cup effect disappeared (P ≤ .015). The stability ratio for anterior and anteroinferior testing was more diminished by posterosuperior labral tears than anteroinferior labral tears, and the stability ratio for posterior testing was more diminished by anteroinferior labral tears than posterosuperior labral tears. CONCLUSION: Anteroinferior labral tears decreased posterior stability and posterosuperior labral tears decreased anterior and anteroinferior stability, largely because of loss of the suction cup effect.

How much force is acting on the shoulder joint to create a Hill-Sachs Lesion or reverse Hill-Sachs Lesion?

BACKGROUND: It has not been clarified yet how much force is acting on the shoulder joint to create Hill-Sachs/reverse Hill-Sachs lesions which are commonly observed in patients with anterior or posterior shoulder instability. The purpose of this study was to determine the magnitude of force to create these bony lesions using cadaveric shoulders. METHODS: Fourteen fresh-frozen cadaveric shoulders were used. Compression tests were performed using the universal testing machine. The specimens were randomly divided into two groups. In group A, the posterior humeral head (the bare area and articular cartilage) was first compressed against the anterior glenoid rim to simulate a Hill-Sachs lesion, followed by the anterior humeral head being compressed against the posterior glenoid rim. In group B, the same procedure was repeated in the reverse order. X-ray microcomputed tomography (microCT) was also performed. RESULTS: The maximum compression force to create a Hill-Sachs lesion was 771 ± 214 N (mean ± SD) on the articular cartilage of the posterior humeral head, which was significantly greater than the force of 447 ± 215 N to create it on the bare area (P = 0.0086). Regarding the reverse Hill-Sachs lesions, the maximum compression force was 840 ± 198 N when it was created on the articular cartilage of the anterior humeral head, which was significantly greater than the force of 471 ± 100 N when it was created at the footprint of the subscapularis tendon (P = 0.0238). MicroCT showed multiple breakage of the trabecular bone. CONCLUSION: A force to create a Hill-Sachs lesion or a reverse Hill-Sachs lesion was significantly greater when it was created on the humeral articular cartilage than at the non-cartilage area. Also, the force to create a reverse Hill-Sachs lesion was significantly greater than the one to create a Hill-Sachs lesion.

ß-type TiNbSn Alloy Plates With Low Young Modulus Accelerates Osteosynthesis in Rabbit Tibiae.

BACKGROUND: Ti6Al4V alloy, which is commonly used for biomedical applications, has a Young modulus (110 GPa) that is higher than that of human cortical bone (11 to 20 GPa). Using an implant with a material with a low Young modulus that enhances load sharing by the bone even more than those made of Ti6Al4V could be beneficial for bone healing and further reduce the potential for stress shielding. A new ß-type TiNbSn alloy has a low Young modulus of approximately 40 to 49 GPa. However, whether the new titanium alloy with a lower Young modulus is advantageous in terms of fracture healing has not been assessed, and a small-animal model seems a reasonable first step in its assessment. QUESTIONS/PURPOSES: To assess the impact of a TiNbSn alloy plate with a lower Young modulus compared with a Ti6Al4V alloy plate on fracture healing, we evaluated: (1) bony bridging and callus volume, (2) new bone formation and remaining cartilage tissue, (3) osteoblast activity in the callus, and (4) mechanical strength and stiffness of the callus in bending. METHODS: Fracture plates manufactured from TiNbSn and Ti6Al4V alloys, which have Young moduli of 49 GPa and 110 GPa, respectively, were compared. The main reason for using rabbits was the high reliability of the three-point bending mechanical test of the rabbit tibia. Forty-two male Japanese white rabbits weighing 2.8 to 3.4 kg were anesthetized. A 5-cm skin incision was made on the medial side in the mid-diaphysis of the right tibia. Eight-hole plates were used, which were 42 mm long, 5 mm wide, and 1.2 mm thick. Plate fixation was performed using three proximal and three distal screws. After the plate was installed, an osteotomy was performed using a 1-mm-wide wire saw to create a standardized tibial transverse osteotomy model with a 1-mm gap. Bone healing was quantitatively assessed by two nonblinded observers using micro-CT (bony bridging and callus volume), histomorphometry (new bone formation and remaining cartilage tissue), immunohistochemistry (osteoblast activity), and mechanical testing (mechanical strength and stiffness in bending). Measurements on nondemineralized specimens were descriptive statistics due to their small number. Four weeks after osteotomy and fixation, 30 rabbits were euthanized to undergo micro-CT and subsequent mechanical testing (n = 12), histomorphometry and immunohistochemistry with demineralized specimens (n = 12), and histomorphometry with a nondemineralized specimen (n = 6). Eight weeks postoperatively, 12 rabbits were euthanized for micro-CT and subsequent mechanical testing. RESULTS: Intramedullary fracture calluses treated with TiNbSn alloy plates had larger bone volumes and more numerous bridging structures than those treated with Ti6Al4V alloy plates at 4 weeks after osteotomy (Ti6Al4V alloy versus TiNbSn alloy: 30 ± 7 mm 3 versus 52 ± 14 mm 3 , mean difference 22 [95% CI 9 to 37]; p = 0.005; ICC 0.98 [95% CI 0.95 to 0.99]). Histologic assessments demonstrated there was greater new bone formation (total callus: Ti6Al4V versus TiNbSn: 16 ± 4 mm 2 versus 24 ± 7 mm 2 , mean difference 8 [95% CI 1 to 16]; p = 0.04; ICC 0.98 [95% CI 0.93 to 0.99]; intramedullary callus: Ti6Al4V versus TiNbSn: 6 ± 4 mm 2 versus 13 ± 5 mm 2 , mean difference 7 [95% CI 1 to 13]; p = 0.02; ICC 0.98 [95% CI 0.95 to 0.99]) and a higher number of osteocalcin-positive cells (Ti6Al4V alloy versus TiNbSn alloy: 1397 ± 197 cells/mm 2 versus 2044 ± 183 cells/mm 2 , mean difference 647 [95% CI 402 to 892]; p < 0.001; ICC 0.98 [95% CI 0.95 to 0.99]) in the TiNbSn alloy group than in the Ti6Al4V alloy group. At 4 weeks after osteotomy, both bone strength and stiffness of the healed bone in the TiNbSn alloy group were higher than those in the Ti6Al4V alloy group (maximum load: Ti6Al4V alloy versus TiNbSn alloy: 83 ± 30 N versus 127 ± 26 N; mean difference 44 [95% CI 8 to 80]; p = 0.02; stiffness: Ti6Al4V alloy versus TiNbSn alloy: 92 ± 43 N/mm versus 165 ± 63 N/mm; mean difference 73 [95% CI 4 to 143]; p = 0.047). Eight weeks after osteotomy, no between-group differences were observed in the strength and stiffness of the healed bone. CONCLUSION: The results of this study indicate that TiNbSn alloy plate with a lower Young modulus resulted in improved bone formation and stiffer callus during the early phase (4 weeks after surgery) but not the later phase (8 weeks after surgery) of bone healing. CLINICAL RELEVANCE: An overly stiff plate may impair callus formation and bone healing. The TiNbSn alloy plate with a low Young modulus improves the early formation of new bone and stiff callus at the osteotomy site compared with the Ti6Al4V alloy plate in the healing process, which may promote bone repair. TiNbSn alloy may be a promising biomaterial for fracture treatment devices. Further research to address concerns about the strength of TiNbSn alloy plates, such as fatigue life and plate fracture, will be necessary for clinical applications, including mechanical tests to verify fatigue life and validation in larger animals with greater body weight.

Anterior Shoulder Instability Part III-Revision Surgery, Rehabilitation and Return to Play, and Clinical Follow-Up-An International Consensus Statement.

PURPOSE: The purpose of this study was to establish consensus statements via a modified Delphi process on revision surgery, rehabilitation and return to play, and clinical follow-up for anterior shoulder instability. METHODS: A consensus process on the treatment using a modified Delphi technique was conducted, with 65 shoulder surgeons from 14 countries across 5 continents participating. Experts were assigned to one of 9 working groups defined by specific subtopics of interest within anterior shoulder instability. RESULTS: The primary relative indications for revision surgery include symptomatic apprehension or recurrent instability, additional intra-articular pathologies, and symptomatic hardware failure. In revision cases, the differentiating factors that dictate treatment are the degree of glenohumeral bone loss and rotator cuff function/integrity. The minimum amount of time before allowing athletes to return to play is unknown, but other factors should be considered, including restoration of strength, range of motion and proprioception, and resolved pain and apprehension, as these are prognostic factors of reinjury. Additionally, psychological factors should be considered in the rehabilitation process. Patients should be clinically followed up for a minimum of 12 months or until a return to full, premorbid function/activities. Finally, the following factors should be included in anterior shoulder instability-specific, patient-reported outcome measures: function/limitations impact on activities of daily living, return to sport/activity, instability symptoms, confidence in shoulder, and satisfaction. CONCLUSION: Overall, 92% of statements reached unanimous or strong consensus. The statements that reached unanimous consensus were indications and factors affecting decisions for revision surgery, as well as how prior surgeries impact procedure choice. Furthermore, there was unanimous consensus on the role of psychological factors in the return to play, considerations for allowing return to play, as well as prognostic factors. Finally, there was a lack of unanimous consensus on recommended timing and methods for clinical follow-up. LEVEL OF EVIDENCE: Level V, expert opinion.

Anterior Shoulder Instability Part II-Latarjet, Remplissage, and Glenoid Bone-Grafting-An International Consensus Statement.

PURPOSE: The purpose of this study was to establish consensus statements via a modified Delphi process on the Latarjet procedure, remplissage, and glenoid-bone grafting for anterior shoulder instability. METHODS: A consensus process on the treatment utilizing a modified Delphi technique was conducted, with 65 shoulder surgeons from 14 countries across 5 continents participating. Experts were assigned to one of 9 working groups defined by specific subtopics of interest within anterior shoulder instability. RESULTS: The technical approaches identified in the statements on the Latarjet procedure and glenoid bone-graft were that a subscapularis split approach should be utilized, and that it is unclear whether a capsular repair is routinely required. Furthermore, despite similar indications, glenoid bone-grafting may be preferred over the Latarjet in patients with bone-loss greater than can be treated with a coracoid graft, and in cases of surgeon preference, failed prior Latarjet or glenoid bone-grafting procedure, and epilepsy. In contrast, the primary indications for a remplissage procedure was either an off-track or engaging Hill-Sachs lesion without severe glenoid bone loss. Additionally, in contrast to the bone-block procedure, complications following remplissage are rare, and loss of shoulder external rotation can be minimized by performing the tenodesis via the safe-zone and not over medializing the fixation. CONCLUSION: Overall, 89% of statements reached unanimous or strong consensus. The statements that reached unanimous consensus were the prognostic factors that are important to consider in those undergoing a glenoid bone-grafting procedure including age, activity level, Hill-Sachs Lesion, extent of glenoid bone-loss, hyperlaxity, prior surgeries, and arthritic changes. Furthermore, there was unanimous agreement that it is unclear whether a capsular repair is routinely required with a glenoid bone graft, but it may be beneficial in some cases. There was no unanimous agreement on any aspect related to the Latarjet procedure or Remplissage. LEVEL OF EVIDENCE: Level V, expert opinion.

Anterior Shoulder Instability Part I-Diagnosis, Nonoperative Management, and Bankart Repair-An International Consensus Statement.

PURPOSE: The purpose of this study was to establish consensus statements via a modified Delphi process on the diagnosis, nonoperative management, and Bankart repair for anterior shoulder instability. METHODS: A consensus process on the treatment using a modified Delphi technique was conducted, with 65 shoulder surgeons from 14 countries across 5 continents participating. Experts were assigned to one of 9 working groups defined by specific subtopics of interest within anterior shoulder instability. RESULTS: The independent factors identified in the 2 statements that reached unanimous agreement in diagnosis and nonoperative management were age, gender, mechanism of injury, number of instability events, whether reduction was required, occupation, sport/position/level played, collision sport, glenoid or humeral bone-loss, and hyperlaxity. Of the 3 total statements reaching unanimous agreement in Bankart repair, additional factors included overhead sport participation, prior shoulder surgery, patient expectations, and ability to comply with postoperative rehabilitation. Additionally, there was unanimous agreement that complications are rare following Bankart repair and that recurrence rates can be diminished by a well-defined rehabilitation protocol, inferior anchor placement (5-8 mm apart), multiple small-anchor fixation points, treatment of concomitant pathologies, careful capsulolabral debridement/reattachment, and appropriate indications/assessment of risk factors. CONCLUSION: Overall, 77% of statements reached unanimous or strong consensus. The statements that reached unanimous consensus were the aspects of patient history that should be evaluated in those with acute instability, the prognostic factors for nonoperative management, and Bankart repair. Furthermore, there was unanimous consensus on the steps to minimize complications for Bankart repair, and the placement of anchors 5-8 mm apart. Finally, there was no consensus on the optimal position for shoulder immobilization. LEVEL OF EVIDENCE: Level V, expert opinion.

Increased external rotation related to the soft tissues is associated with pathologic internal impingement in high-school baseball players.

BACKGROUND: Changes in soft-tissue structures such as anterior laxity and posterior tightness are thought to contribute to the development of pathologic internal impingement in baseball players. Although side-to-side differences in shoulder rotational range of motion (ROM) is commonly used in clinical practice to quantify the soft-tissue changes, the ROM does not accurately reflect the soft-tissue changes because the ROM is affected not only by the soft tissues, but also by the bone. Increased retroversion of the humeral head is often observed in the dominant shoulder of throwing athletes. The purpose of this study was to determine the relationship between the soft-tissue-related (STR) ROM and pathologic internal impingement in baseball players. METHODS: Bilateral humeral retroversion and ranges of glenohumeral external rotation (ER) and internal rotation (IR) were investigated in 81 high-school baseball players. The players were divided into two groups: the internal impingement group (19 players) and the control group (62 players). Humeral retroversion was measured using the ultrasound-assisted technique to assess the bone-related ER and IR. The STR ER and IR were defined as subtracting the amount of humeral retroversion from the measured ER and IR. RESULTS: The side-to-side difference (throwing shoulder - nonthrowing shoulder) in humeral retroversion showed no significant difference between the internal impingement group (6° ± 10°) and control group (11° ± 11°) (P = .064). The side-to-side difference in STR ER was significantly greater in the internal impingement group (12° ± 12°) than that in the control group (1° ± 14°) (P = .002). No significant difference was observed in the side-to-side difference in STR IR between the internal impingement group (-7° ± 16°) and control group (-5° ± 15°) (P = .696). Pathologic internal impingement was significantly associated with the side-to-side difference of STR ER (odds ratio, 1.06 for increase of 1°; 95% confidence interval, 1.02-1.11; P = .008). CONCLUSION: In high-school baseball players, the increased STR ER in the throwing shoulder may be associated with pathologic internal impingement. An increase of 10° in side-to-side difference in STR ER would increase the risk of pathologic internal impingement by 1.8 times.

Long-term effect of immobilization in external rotation after first-time shoulder dislocation: an average 18-year follow-up.

BACKGROUND: Immobilization in external rotation (ER) after a first-time shoulder dislocation was introduced to reduce the risk of recurrence compared with immobilization in internal rotation (IR), but its efficacy remains controversial. The purpose of this study was to determine the long-term effect of immobilization in ER after a first-time shoulder dislocation. METHODS: Between October 2000 and March 2004, 198 patients with a first-time anterior dislocation of the shoulder (average age 37) were randomly assigned to immobilization in ER (ER group = 104 shoulders) or IR (IR group = 94 shoulders) for 3 weeks. At an average 2-year follow-up, 159 patients (80.3%) were available for evaluation. In the current study, these 159 patients were further followed up and interviewed by telephone. The following items were evaluated: recurrent instability, apprehensive feeling, surgical intervention, limitation in the range of motion, return to sports, and the Single Assessment Numeric Evaluation (SANE) score. RESULTS: The average follow-up period was 18.2 years (range, 16-20 years). Fifty-six patients were available for follow-up with the follow-up rate of 35%. The number of recurrent patients was 6 of 27 (22%) in the ER group and 6 of 29 (21%) in the IR group (P = .889). The number of surgically stabilized patients was 3 of 27 (11%) in the ER group and 10 of 29 (34%) in the IR group (P = .038). In total, the recurrence rate was 33% (9 of 27) in the ER group and 55% (16 of 29) in the IR group (P = .100). Adding the surgical cases and those with the SANE score ≤70% as failure cases, the failure rate in the ER group (26%) was significantly lower than that in the IR group (52%) (P = .048). Among those who survived without surgical intervention, there were no significant differences in apprehensive feeling, return to sports, limited range of motion, and the SANE score between the groups. CONCLUSIONS: Immobilization in ER reduced the risk of surgical intervention compared with IR in the long term.

Prevalence of pre-existing factors causing spinal cord compression: Is there a difference between patients suffering from cervical spinal cord injury with and without bone injury?

BACKGROUND: Recently, the prevalence of elderly patients suffering from cervical spinal cord injury (CSCI) without bone injury has been increasing in various countries. Pre-existing factors causing spinal cord compression, such as ossification of the posterior longitudinal ligament (OPLL), can increase the risk of CSCI without bone injury. However, no study has compared the prevalence of pre-existing factors between CSCI with and without bone injury. This study aimed to compare the prevalence of pre-existing factors between CSCI with and without bone injury. METHODS: In 168 consecutive patients with CSCI, pre-existing factors including OPLL, posterior spur of the vertebral body, developmental stenosis, disc bulge and calcification of yellow ligament (CYL) were evaluated on imaging studies. The prevalence of each type of pre-existing factors was compared between patients with and without bone injury. RESULTS: The prevalence of pre-existing factors in patients without bone injury (86%) was significantly higher than in those with bone injury (20%) (P < 0.001; odds ratio, 23.9). The most common pre-existing factor was OPLL followed by developmental stenosis, posterior spur, disc bulge and CYL in both groups. OPLL, development stenosis and posterior spur were significantly more common in patients without bone injury compared to those with bone injury (P < 0.01). CONCLUSIONS: Prevalence of pre-existing factors, such as OPLL, development stenosis and posterior spur was significantly higher in patients without bone injury than in those with bone injury. Thus, these pre-existing factors might be a potential risk of CSCI without bone injury.

Retrospective comparison of the surgical results for patients with thoracic myelopathy caused by ossification of the posterior longitudinal ligament: Posterior decompression with instrumented spinal fusion versus modified anterior decompression through a posterior approach.

BACKGROUND: In Japan, approximately 75% of patients with thoracic myelopathy caused by ossification of the posterior longitudinal ligament (OPLL) are treated by posterior decompression with instrumented spinal fusion (PDF) because of its efficacy and safety. To achieve more effective decompression of the spinal cord using a posterior approach, anterior decompression through a posterior approach was developed. However, this technique has a high risk of postoperative paralysis. We have added a couple of ingenuities to this procedure (modified Ohtsuka procedure). This study was performed to report the surgical results of our modified Ohtsuka procedure and to compare them with the results of PDF. METHODS: This was a retrospective case series. From 2008 to 2018, we surgically treated 32 patients: 20 patients treated by PDF (PDF group) and 12 patients by our modified Ohtsuka procedure (modified Ohtsuka group) as the initial surgery. All patients were followed up for at least 12 months. The degree of surgical invasion and patients' neurological condition were assessed. RESULTS: The operative duration and intraoperative blood loss indicated no significant differences (PDF vs. Ohtuska: 507 ± 103 vs. 534 ± 99 min, 1022 ± 675 vs. 1160 ± 685 ml, respectively). The preoperative Japanese Orthopaedic Association (JOA) score was 4.5 ± 2.0 in the PDF group and 3.3 ± 1.4 in the modified Ohtsuka group (p < 0.05). However, the latest JOA score and recovery rate were significantly better in the modified Ohtsuka group than in the PDF group (8.9 ± 1.2 vs. 7.4 ± 2.5 and 70.8 ± 17.6% vs. 44.5 ± 40.2%, respectively). Postoperative paralysis did not occur in the modified Ohtsuka group while four patients had it in the PDF group. CONCLUSIONS: The present study clearly indicated the modified Ohtsuka group showed significantly better surgical outcomes than the PDF group with the recovery rate ≥70%.

Optimal bone biopsy route to the proximal femur evaluated by computed tomography-based finite element modeling.

INTRODUCTION: The proximal femur (PF) is one of the most common locations of benign cystic lesions. A fracture after bone biopsy is a rare but severe complication. However, the risk of fracture after biopsy of this lesion has not been well-studied. Computed tomography (CT)-based finite element (FE) modeling estimates the elastic modulus and compressive strength enables fracture prediction. This study investigated strength of PF after biopsy by CT-FE modeling and determined the optimum biopsy level and size. MATERIALS AND METHODS: Six male bone tumor patients' (15-38 years) total femur CT data (slice thickness, 0.8-1.0 mm) of the healthy side were obtained. Three different cylindrical bone defect (BD) diameters (10, 15, and 20 mm) were set on the lateral surface of PF at the following levels: level 1, insertion of the gluteus minimums; level 2, lower end of the greater trochanter (GT); level 3, origin of the vastus lateralis; level 4, center of the lesser trochanter (LT); and level 5, lower end of LT using Mechanical Finder software (version 8.0). Virtual loads were applied with incremental increases of 100 N until fracture occurred and the fracture load (FL) was evaluated. RESULTS: For BD with a diameter of 15 and 20 mm, there was a significant difference in the decrease of the mean FL, with an average of 22% at level 4 and 5, and 33%-44% at levels 3 to 5, respectively. At level 1 and 2, no significant decrease in the mean FL was observed regardless of the diameter of BD. CONCLUSION: Biopsies at level 1 and 2 showed no significant decrease in bone strength. However, biopsy at level 1 may contaminate the GT bursas. Therefore, biopsy at level 2 (lower end of GT) can avoid contamination and minimize the effect on bone strength.

Novel augmentation technique of percutaneous pedicle screw fixation using hydroxyapatite granules in the osteoporotic lumbar spine: a cadaveric biomechanical analysis.

PURPOSE: Percutaneous pedicle screw (PPS) fixation has been commonly used for various spine surgeries. Rigid PPS fixation is necessary to decrease the incidence of screw loosening in osteoporotic spine. Recently, we have reported biomechanical advantages of augmentation technique using hydroxyapatite (HA) granules for PPS fixation in synthetic bone. However, its biomechanical performance in augmenting PPS fixation for osteoporotic spine has not been fully elucidated. The aim of the present study is to perform a cadaveric biomechanical analysis of PPS fixation augmented with HA granules. METHODS: Thirty osteoporotic lumbar vertebrae (L1-L5) were obtained from 6 cadavers (3 men and 3 women; age 80 ± 9 years; bone mineral density 73 ± 9 mg/cm3). The maximal pullout strength and maximal insertion torque were compared between the screws inserted into the vertebrae with and without augmentation. In toggle testing, the number of craniocaudal toggle cycles and maximal load required to achieve the 2-mm screw head displacement were also compared. RESULTS: The maximal pullout strength in the screws augmented with HA granules was significantly greater compared to those without augmentation (p < 0.05). The augmentation significantly increased the maximal insertion torque of the screws (p < 0.05). Moreover, the number of toggle cycles and the maximal load required to reach 2 mm of displacement were significantly higher in the augmented screws (p < 0.05). CONCLUSION: The PPS fixation was significantly enhanced by the augmentation with HA granules in the osteoporotic lumbar spine. The PPS fixation augmented with HA granules might decrease the incidence of screw loosening and implant failure in patients with osteoporotic spine.

Mid-term results of a new femoral prosthesis using Ti-Nb-Sn alloy with low Young's modulus.

BACKGROUND: This study was performed to investigate the mid-term results of Ti-Nb-Sn (TNS) alloy stem with a low Young's modulus. METHODS: This study was a multicenter prospective cohort study. A total of 40 primary total hip arthroplasties performed between April 2016 and September 2017 was enrolled in this study. With the unique functional gradient properties by heating treatment, the strength of the proximal portion was enhanced, while the distal portion maintained a low Young's modulus. The surgeries were performed through the posterolateral approach using the TNS alloy stems. Radiographs were taken from immediately after surgeries until 3 years, and stress shielding and subsidence of the stems were evaluated. The incidences of the stem breakage were also assessed. Clinical assessments were performed using Japanese Orthopaedic Association (JOA) and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) scores. RESULTS: Among the 40 enrolled patients, 36 patients were female and 4 were male. At 3 years after surgery, there were no radiologic signs of loosening, subsidence, or breakage of the stem. Stress shielding was observed in 26 hips (65%). Of 26 hips, 16 hips (40%) were grade 1 and 10 hips (25%) were grade 2. There was no advanced stress shielding. The JOA and JHEQ scores significantly improved compared with the preoperative scores. CONCLUSION: The current study using a new TNS alloy femoral stem showed good clinical outcomes at 3-year follow-up. Radiologically, there was no loosening or subsidence of the stem. The mild stress shielding was observed in 65% of patients. TRIAL REGISTRATION: Current Controlled Trials ISRCTN21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Morphological and Morphometrical Analyses of Fracture-Healing Sites of an Atypical Femoral Fracture in Patients with and without Long-Term Bisphosphonate Treatment for Osteoporosis: A Report of Two Cases.

Bisphosphonates have been the first drug of choice for osteoporosis in the recent years because of their known ability to suppress osteoclast activity. The adverse effect of long-term bisphosphonate administration in the fracture-healing process is controversial. The aim of our study was to observe not only morphology but also morphometry of the fracture site of atypical femoral fracture with and without long-term bisphosphonate administration, in a case study of two difficult-to-obtain human samples. The patients with insufficient healing of atypical femoral fracture were treated with valgus wedge osteotomy. Histomorphometrical analysis was performed in bone samples of fracture sites harvested during osteotomy. The thickness of the femoral cortex was measured in the fracture site and the adjacent, non-fracture site. A comparative analysis of the content of hypertrophic osteoclasts in fracture sites, shape and size of osteons, mass, and ratio of the woven bone to the total bone mass was performed, comparing bisphosphonate-treated and untreated samples. In bisphosphonate-treated samples, we observed femoral cortex thickening at the fracture site; the appearance of hypertrophic osteoclasts; decreased bone resorption surface, decreased osteoclast numbers on the bone resorption surface, and increased ratio of multinuclear osteoclasts; osteons were misshapen and thin; and the mass and ratio of the woven bone to the total bone mass were higher. This study demonstrated that long-term bisphosphonate administration can alter the morphological features of the fracture site compared to its physiological state.

Characteristics of Parents Who Feel a Lack of Communication with Coaches of Youth Sports.

Communication between parents and their children's coaches is important for children's sports activities, but the relationship between parents and coaches is not well understood. It is possible that parents feel a lack of communication with coaches, which could be due to parents' experience with sports activities or the social environment of the team. This study aimed to elucidate the characteristics of parents who feel a lack of communication with their children's coaches of youth sports. A cross-sectional study was conducted on parents of young athletes (n = 6,641) and multivariate logistic regression analyses were performed to assess factors related to parents' feeling of a lack of communication with their children's coaches. Among the respondents, 29.4% of parents felt a lack of communication with their children's coaches. The factors related to the parents' feeling were a shorter duration of their children playing the present sport, an absence of experience playing the same sport as their children or playing in a team with high competition level, dissatisfaction with their children's attitude towards sports activities, and an awareness of verbal and/or physical abuse by the coaches and bullying by the teammates in their children's team. Parents' previous sports experience and awareness of interpersonal violence in their children's team were associated with their feeling of a lack of communication with coaches. Educating parents on the sport and their roles in youth sport is necessary to make appropriate mutual communication between parents and coaches, which could lead to better circumstances for young athletes.

Editorial Commentary: It Is Not the Size, But the Location of Hill-Sachs Lesion That Matters.

The risk of a Hill-Sachs lesion (HSL) to engage the anterior glenoid rim depends on the location of the medial margin of the HSL relative to the anterior rim of the glenoid. The same-sized HSL can be engaging or nonengaging depending upon the size of the glenoid. In order to assess these bony lesions (bipolar lesion) together, the glenoid track concept has been introduced: an on-track lesion (stable) and an off-track lesion (unstable). Three-dimensional computed tomography (3D-CT) confirms that more medialized HSLs have larger volume, greater width, more surface area loss, and higher lesion angles (HS angle), and are more inferior in the humeral head. We know that medialization of the HSL is a definitive risk factor to make it off track, whereas the volume, surface area, and width are all subordinate risk factors dependent on the medialization. On the other hand, while we know very little about the orientation of the HSL, recent research shows a significant association between the medialization and orientation of the HSL. However, we do not know whether the orientation is an independent risk factor or dependent on the medialization. There are two things I emphasize when I look at a HSL: 1) do not look at the HSL alone, but look at the glenoid as well, and 2) the risk of the HSL depends on the location of the medial margin of the HSL relative to the glenoid, not on the volume, depth, or length.