Polystyrene Sulfonate Particles as Building Blocks for Nanofiltration Membranes.

Today the standard treatment for wastewater is secondary treatment. This procedure cannot remove salinity or some organic micropollutants from water. In the future, a tertiary cleaning step may be required. An attractive solution is membrane processes, especially nanofiltration (NF). However, currently available NF membranes strongly reject multivalent ions, mainly due to the dielectric effect. In this work, we present a new method for preparing NF membranes, which contain negatively and positively charged domains, obtained by the combination of two polyelectrolytes with opposite charge. The negatively charged polyelectrolyte is provided in the form of particles (polystyrene sulfonate (PSSA), d ~300 nm). As a positively charged polyelectrolyte, polyethyleneimine (PEI) is used. Both buildings blocks and glycerol diglycidyl ether as crosslinker for PEI are applied to an UF membrane support in a simple one-step coating process. The membrane charge (zeta potential) and salt rejection can be adjusted using the particle concentration in the coating solution/dispersion that determine the selective layer composition. The approach reported here leads to NF membranes with a selectivity that may be controlled by a different mechanism compared to state-of-the-art membranes.

Demonstration of a compact deep UV Raman spatial heterodyne spectrometer for biologics analysis.

Monoclonal antibodies and antibody fragments are increasingly important classes of biotherapeutics. However, these products are both challenging and expensive to manufacture. New process analytical technologies used to monitor these products during their manufacture are of significant interest. Deep UV Raman spectroscopy promises to provide the required specificity and accuracy, however instruments, have historically been large and complex. In this paper, a new deep UV Raman instrument is described using a solid-state laser and a spatial heterodyne spectrometer. The instrument overcomes practical limitations of the technique and could readily be used for online measurement. A series of observations have been made of biopharmaceutical products, including immunoglobulin G and domain antibodies. Where high levels of both specificity and linearity when measuring samples of different concentration with a precision of better than 0.05 mg/mL has been demonstrated.

Engineering of cardiac microtissues by microfluidic cell encapsulation in thermoshrinking non-crosslinked PNIPAAm gels.

Multicellular agglomerates in form of irregularly shaped or spherical clusters can recapitulate cell-cell interactions and are referred to as microtissues. Microtissues gain increasing attention in several fields including cardiovascular research. Cardiac microtissues are evolving as excellent model systems for drug testingin vitro(organ-on-a-chip), are used as tissue bricks in 3D printing processes and pave the way for improved cell replacement therapiesin vivo. Microtissues are formed for example in hanging drop culture or specialized microwell plates; truly scalable methods are not yet available. In this study, a novel method of encapsulation of cells inpoly-N-isopropylacrylamid(PNIPAAm) spheres is introduced. Murine induced pluripotent stem cell-derived cardiomyocytes and bone marrow-derived mesenchymal stem cells were encapsulated in PNIPAAm by raising the temperature of droplets formed in a microfluidics setup above the lower critical solute temperature (LCST) of 32 °C. PNIPAAM precipitates to a water-insoluble physically linked gel above the LCST and shrinks by the expulsion of water, thereby trapping the cells in a collapsing polymer network and increasing the cell density by one order of magnitude. Within 24 h, stable cardiac microtissues were first formed and later released from their polymer shell by washout of PNIPAAm at temperatures below the LCST. Rhythmically contracting microtissues showed homogenous cell distribution, age-dependent sarcomere organizations and action potential generation. The novel approach is applicable for microtissue formation from various cell types and can be implemented into scalable workflows.