Does a foot-drop implant improve kinetic and kinematic parameters in the foot and ankle?

INTRODUCTION: Unlike the drop foot therapy with ortheses, the therapeutic effect of an implantable peroneus nerve stimulator (iPNS) is not well described. IPNS is a dynamic therapy option which is placed directly to the motoric part of the peroneal nerve and evokes a dorsiflexion of the paralysed foot. This retrospective study evaluates the kinematics and kinetics in drop foot patients who were treated with an iPNS. MATERIALS AND METHODS: 18 subjects (mean age 51.3 years) with a chronic stroke-related drop foot were treated with an implantable peroneal nerve stimulator. After a mean follow-up from 12.5 months, kinematics and kinetics as well as spatiotemporal parameters were evaluated and compared in activated and deactivated iPNS. Therefore, a gait analysis with motion capture system (Vicon Motion System Ltd®, Oxford, UK) and Plug-in-Gait model was performed. RESULTS: The study showed significantly improved results in ankle dorsiflexion from 6.8° to 1.8° at the initial contact and from -7.3° to 0.9° during swing phase (p ≤ 0.004 and p ≤ 0.005, respectively). Likewise, we could measure improved kinetics, i.a. with a statistically significant improvement in vertical ground reaction force at loading response from 99.76 to 106.71 N/kg (p = 0.043). Enhanced spatiotemporal results in cadence, douple support, stride length, and walking speed could also be achieved, but without statistical significance (p > 0.05). CONCLUSIONS: The results show statistically significant improvement in ankle dorsiflexion and vertical ground reaction forces. These facts indicate a more gait stability and gait efficacy. Therefore, the use of an iPNS appears an encouraging therapeutic option for patients with a stroke-related drop foot.

Periprosthetic fractures: concepts of biomechanical in vitro investigations.

PURPOSE: Experimental in vitro studies investigating periprosthetic fractures after joint replacement are used increasingly. The purpose of this review was to deliver a condensed survey of studies in order to provide researchers with an overview of relevant scientific results and their clinical relevance. METHODS: A literature search was conducted to obtain all available papers dealing with periprosthetic fractures, with particular attention being paid to articles with an experimental research design. Study goals, scientific methods and results, their interpretation and clinical relevance were assessed and compared. The main focus was on comparability with clinical fracture patterns and physiological joint loads. RESULTS: Excluding duplicates, 24 studies with regard to artificial hip, knee and shoulder joints were found dating back to August 2000. Almost all studies were performed quasi-statically and without consideration of muscle forces and thus reflect selected loading conditions and no dynamic situation during activities of daily living (ADL). Various experimental protocols were used, differing in the choice of experimental material, implant and fixation system and load application. CONCLUSIONS: In vitro studies regarding periprosthetic fracture research allow controlling for disturbances, such as clinically occurring risk factors like reduced bone mineral density (BMD) or greater patient age. Notwithstanding, due to methodological differences, comparisons between studies were possible to a limited degree only. For this reason, and because of quasi-static loading typically applied, results can only be partially applied to clinical practice.

Length of clinically proven cemented hip stems: state of the art or subject to improvement?

PURPOSE: The purpose of this study was to identify the shortest possible length of an established cemented hip stem in order to reduce stress shielding and optimise its bending behaviour. METHODS: Twenty-five prototypes from the same batch (five for each stem length) were included. Lengths resulted from the original length (100 %) and four distal shortenings to 94, 88, 83 and 78 % of original length. For standardised implantations, synthetic femurs were prepared. Relative movements under axial torque and stem bending under varus-valgus torque applications were investigated consecutively. Analyses of variance (ANOVA) were applied to detect differences between lengths. RESULTS: The maximum torque transfer occurred at the level of the lesser trochanter (p < 0.01). In particular, for the 78 % version, relative motion of the stem tip increased significantly compared with all other lengths (p = 0.02-0.04). Comparable findings were made for mean overall movements. In regards to varus-valgus torque, both the distal tip and the proximal shoulder always bent in the same direction following the femoral deflection. For the 83 % version bending of stem's shoulder was increased compared with the other length (p = 0.01 - 0.02), whereas tip bending was always comparable (p = 0.45-0.91). CONCLUSIONS: Our data show that the intention to preclinically optimise the mechanical behaviour of cemented stems by modifying their length seems to be a reasonable option. Advantages are decreased inner bone stiffening to reduce stress shielding and a lower cement volume, which is involved in cellular interactions.

Fixation pattern of conical and cylindrical modular revision hip stems in different size bone defects.

PURPOSE: Femoral defects often make it difficult to achieve sufficient fixation of the stem during revision surgery. No clinical studies comparing modular stems are available and differentiated recommendations are rare. The aim of this study was to compare the fixation of different revision stems in an experimental and standardised manner. METHODS: Segmental AAOS type I and III defects were reproduced in four femur pairs and two modular stems of different shape (cylindrical and conical) were implanted. Interfacial stem-bone movements were measured under axial torque application to analyze the stem fixation depending on defect extension. RESULTS: Both stems showed adequate fixation in AAOS type I defect. The defect extension significantly reduced the fixation of both implants. The fixation pattern changed significantly for the cylindrical-shaped stem but was maintained for the conical-shaped stem. CONCLUSIONS: Shape as well as the extension of femoral defect have an impact on primary fixation. A type I defect seems to be bridgeable for both stems albeit in a different way. In contrast, stem-demanding activities during the healing phase have to be avoided for the conical-shaped stem in a type III defect, whereas the cylindrical-shaped stem has already ceased to be sufficiently stable in this case.

Changes of periprosthetic bone density after a cementless short hip stem: a clinical and radiological analysis.

PURPOSE: The purpose of this study was to examine the concept of proximal load initiation of a total short-stemmed hip arthroplasty (Metha BBraun, Aesculap, Tuttlingen, Germany) on the basis of bone variations by means of osteodensitometric dual energy X-ray absorptiometry and radiologic measurements. METHODS: After power analysis 40 patients were included in this study. DXA examination, radiological and clinical follow-up was performed pre-operatively and postoperatively. Socio-demographic relevancies of bone progression and radiological changes were raised epidemiologically and clinically. RESULTS: Improvement of the Harris hip score from 54.7 points preoperative to 96.7 points postoperative was detected (p < 0.01). Loss of summarized overall net average bone mass density (netavg BMD) could only be manifested after six months compared to the netavg BMD of the postoperative measurement (p < 0.01). After six and 12 months BMD atrophy was shown mainly in regions of interest (ROI) 1, 4 and 7. Positive correlations between changes of BMD and age, male sex and BMI were detectable. No stem had to be revised. CONCLUSIONS: The Metha implant shows excellent osseointegration at the coated area of the stem without factors of aseptic loosening in the short term. This study shows that parameters like age, sex and BMI influence BMD progression and stress shielding. Metha implant shows excellent results especially in young patients with good bone stock.

Strut grafts in revision hip arthroplasty faced with femoral bone defects: an experimental analysis.

PURPOSE: In total hip arthroplasty fixation of revision stems can be demanding due to femoral bone loss. Strut grafts are often used for bone augmentation and stabilization of the newly inserted prosthesis. The aim of this study was to assess the effect of strut grafts on primary stability under various stem fixation conditions. METHODS: Two different revision stems (cylindrical and conical shape) were implanted into synthetic femora. Following a semicircular transfemoral osteotomy, three deficient femoral bearings were simulated (bony lid reattached with cable wires; weakened lid reattached with cable wires; strut grafts placed to the weakened lid with cable wires). Relative micro-movements were measured between prostheses and bones due to an axial moment applied to the stems. RESULTS: Relative movements correlated to the stem shape. The cylindrical stem showed higher movements increasing significantly with a weakened bony lid and portrayed a slight decrease of movements with strut graft application. No unequivocal influence of the weakened lid could be detected for the conical implant. Strut graft application did not show an additional stabilizing effect. CONCLUSIONS: The primary stability of the cylindrical fixation concept decreases with impaired fixation conditions of the femur. A clear restabilizing effect with strut grafts could not be proven. A decrease of primary stability due to the impaired bone could not be observed for the conical stem shape. Additionally, strut grafts do not enhance fixation for this stem shape. We conclude that surgeons should not rely on a stabilizing effect of strut grafts in revision hip surgery.

Contribution of various forefoot areas to push-off peak at different speeds and slopes during walking.

BACKGROUND: Push-off during the terminal stance phase has a major impact on forward progression during walking. During this phase, the ground reaction force is applied to a small area under the forefoot. A better understanding of how single forefoot areas contribute to push-off peak in healthy subjects is needed to develop biomimetic orthopedic devices for forefoot amputees. RESEARCH QUESTION: What is the contribution of different forefoot sole areas to push-off peak as a function of speed and slope? METHODS: In this analytical study, 15 healthy subjects walked on a treadmill at different speeds (0.8 m/s; 1.2 m/s; 1.6 m/s; max. gait speed) without de-/inclination and on different slopes (-10°; -5°; 0°; 5°; 10°) with normal walking speed. The Novel Pedar-X System was used to measure vertical sole force. Push-off peak of the entire sole was determined and relative contributions of the areas under the hallux, first ray, and toes (I-V) were calculated and analyzed using separate repeated-measures ANOVA (α = 0.05). RESULTS: Push-off peak increases with faster walking speeds as well as with 10° inclination. Downhill walking is associated with a reduced push-off peak. The contribution of all forefoot areas increases with faster walking speeds and at a declination of -10°. Push-off contribution of the area under the hallux increases by about 64.6% at fast walking compared to slow walking and this increase is higher than that of the area under the first ray and toes (p < 0.05). SIGNIFICANCE: These findings indicate the major role of the hallux in speed generation and the importance of the forefoot during downhill walking. The results show the need for an adequate assistive device even in hallux amputation cases to compensate for deficits in the push-off phase.

Short-keeled cemented tibial components show an increased risk for aseptic loosening.

BACKGROUND: The choice of implant design plays an important role for primary fixation of a TKA. Short-keeled tibial components allow implantation through a smaller approach with less femorotibial subluxation. QUESTIONS/PURPOSES: The purpose of this study was to detect early implant failure resulting from aseptic loosening after cemented short-keeled and standard tibial baseplate implantation. METHODS: Between 2008 and 2010, a group of 160 consecutive patients (with 80 standard and with 80 short-keeled tibial trays) received cemented TKAs. At 1-year followup, patients were examined clinically and radiographs were analyzed regarding aspects of radiolucency. The components were divided into five zones on each radiographic view and the measurements of the 10 zones were added. RESULTS: The mean sum of radiolucencies was increased significantly with the short-keeled baseplates. In the current study, short-keeled tibial trays revealed a revision rate of 6.3% after 1-year followup. In contrast, none of the standard tibial baseplates were revised. CONCLUSIONS: The implantation of cemented, short-keeled tibial components is linked to an increased rate of early loosening. Therefore, the indication for cemented, short-keeled component implantation should be reviewed. LEVEL OF EVIDENCE: Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Influence of stem design on the primary stability of megaprostheses of the proximal femur.

PURPOSE: Extended bone defects of the proximal femur can be reconstructed by megaprostheses for which aseptic loosening constitutes one of the major failure modes. The basic requirement for long-term success of endoprostheses is primary stability. We therefore assessed whether sufficient primary stability can be achieved by four different megaprostheses in a standardised bone defect of the proximal femur and whether their different design leads to different fixation patterns. METHODS: Four different designs of proximal femoral replacements were implanted into 16 Sawbones® after preparing segmental bone defects (AAOS type II). Primary rotational stability was analysed by application of a cyclic torque of ±7 Nm and measuring the relative micromotions between bone and implant at different levels. The main fixation zones and differences of fixation patterns of the stem designs were determined by an analysis of variance. RESULTS: All four implants exhibited micromotions below 150 µm, indicating adequate primary stability. Lowest micromotions for all designs were located near the femoral isthmus. The extent of primary stability and the global implant fixation pattern differed considerably and could be related to the different design concepts. CONCLUSIONS: All megaprostheses studied provided sufficient primary stability if the fixation conditions of the femoral isthmus were intact. The design characteristics of the different stems largely determined the extent of primary stability and fixation pattern. Understanding these different fixation types could help the surgeon to choose the most suitable implant if the fixation conditions in the isthmus are compromised.

Comparison of conventional socket attachment and bone-anchored prosthesis for persons living with transfemoral amputation - mobility and quality of life.

BACKGROUND: For patients with transfemoral amputation experiencing issues with their sockets, bone-anchored prosthesis systems are an alternative and sometimes the only way to be mobile and independent. The present cross-sectional study aimed to investigate the gait performance and quality of life of a group of patients treated with bone-anchored systems compared to those of participants treated with a conventional socket-suspended prosthesis. METHODS: A total of 17 participants with a socket-suspended and 20 with a bone-anchored prosthesis were included. Gait patterns were examined for symmetry, and performance was assessed using the six-minute walk test and the timed "Up & Go" test. Magnetic resonance imaging was performed to detect signs of osteoarthritis in both hips. Mobility in everyday life and quality of life were assessed using questionnaires. FINDINGS: There were no differences between the groups regarding the quality of life, daily mobility, and gait performance. The step width was significantly higher for the patients using socket-suspended prosthesis. The socket-suspended group showed a significant asymmetry regarding the step length. In the socket-suspended group, the prosthetic leg showed significantly higher cartilage abrasion than the contralateral leg did. INTERPRETATION: Large differences in the measured outcomes in both groups illustrate the very different capabilities of the individual participants, which is apparently not primarily determined by the type of treatment. For patients who are satisfied with the socket treatment and perform well, bone-anchored prosthesis systems may not necessarily improve their functional capabilities and perceived quality of life.

Implications of ageing effects on thermal and mechanical properties of PMMA-based bone cement for THA revision surgery.

Loosening and infection are the main reasons for revision surgery in total hip arthroplasty (THA). Removing partially detached cemented implant components during revision surgery remains challenging and poses the risk of periprosthetic bone damage. A promising approach for a gentler removal of partially detached prostheses involves softening the PMMA-based bone cement by heating it above its glass transition temperature (TG), thus loosening the implant-cement bond. It is assumed that the TG of PMMA-based bone cement decreases in-vivo due to the gradual absorption of body fluid. Reliable data on TG are essential to develop a heat-based method for removing cemented implant components during revision surgery. The effect of water absorption was investigated in-vitro by ageing PMMA-based bone cement samples for different periods up to 56 days in both Ringer's solution (37 °C) and air (37 °C and 30% humidity). Subsequently, the TG and Vicat softening temperatures of the samples were determined by differential scanning calorimetry and Vicat tests, respectively, according to prescribed methods. Over the entire ageing period, i.e. comparing one day of ageing in air and 56 days in Ringer's solution, the Vicat softening temperature dropped by 16 °C, while the TG dropped by 10 °C for Palacos® R PMMA-based bone cement. Water absorption over time correlated significantly with the Vicat softening temperature until saturation of the PMMA-based bone cement was reached. Based on the TG and Vicat softening temperature measurements, it can be assumed that in body-aged bone cement, an optimal softening can be achieved within a temperature range of 85 °C-93 °C to loosen the bond between the PMMA-based bone cement mantle and the prosthesis stem. These findings may pave the way for a gentler removal of the implant in revision THA.

What do users and their aiding professionals want from future devices in upper limb prosthetics? A focus group study.

BACKGROUND: High rejection rates of upper limb prosthetics indicate that current prosthetic devices only partially meet user demands. This study therefore investigated the benefits and challenges with current prostheses, associated services and potential areas for improvement from the perspective of upper limb prosthesis users and various professionals working in the field of upper limb and hand prosthetics. METHODS AND FINDINGS: Seven different focus group discussions were conducted with 32 participants. Participants were grouped by prosthesis type, if they were prosthesis users, or professionals. All focus group discussions were transcribed verbatim, and a summarizing content analysis was performed. Three main topic areas to be addressed emerged from the interviews: 1. a properly functioning prosthesis, 2. the infrastructure, and 3. users' psychological and physical prerequisites. The interaction between a well-functioning prosthesis and a well-developed infrastructure was shown to be important for successful use. CONCLUSIONS: Our study raises many of the same issues that have been reported in previous qualitative studies, dating back over several decades. This study underlines the need to include users and professionals in the future development of prosthetic devices.

Tactile Feedback in Upper Limb Prosthetics: A Pilot Study on Trans-Radial Amputees Comparing Different Haptic Modalities.

Despite technological advancements, upper limb prostheses still face high abandonment/rejection rates due to limitations in control interfaces and the absence of force/tactile feedback. Improving these aspects is crucial for enhancing user acceptance and optimizing functional performance. This pilot study, therefore, aims to understand which sensory feedback in combination with a soft robotic prosthetic hand could provide advantages for amputees, including performing everyday tasks. Tactile cues provided are contact information, grasping force, degree of hand opening, and combinations of this information. To transfer such feedback, different wearable systems are used, based on either vibrotactile or force stimulation in a non-invasive modality matching approach. Five volunteers with a trans-radial amputation controlling the new prosthetic hand SoftHand Pro performed a study protocol including everyday tasks. The results indicate the preference of amputees for a single, i.e. non-combined, feedback modality. The choice of appropriate haptic feedback seems to be subject and task-specific. Furthermore, in alignment with the participants' feedback, force feedback, with adequate granularity and clarity, could potentially be the most valuable feedback among those presented. Finally, the study suggests that prosthetic solutions should be preferred where amputees are able to choose their feedback system.

Knee disarticulation following oncologic total knee arthroplasty: A 5-year follow-up case report.

BACKGROUND: The present case report describes the 5-year follow-up results of an atypical knee disarticulation of a man previously treated with an oncologic total knee arthroplasty due to an Ewing sarcoma. METHODS: The patient presented an aseptic loosened tibial component of a tumor prosthesis system and requested final amputation, as he had previously suffered from five revision surgeries. To encourage the most functional outcome regarding an exoskeletal prosthesis, we decided to disarticulate the knee joint while retaining the currently fixed femoral component to create a full end-bearing stump. FINDINGS: The patient could be mobilized as a functional knee disarticulated amputee. Seven months after amputation, he showed a slightly less symmetrical gait compared to the preoperative status (preoperative mean Symmetry Index: 0.984 for kinematics and 0.940 for kinetics, 7-month postoperative Symmetry Index: 0.858 and 0.915). At the 5-year follow-up, the femoral component is still stably fixated and shows no loosening signs. In addition, the Symmetry Index increased to 0.908 and 0.949. INTERPRETATION: Even after 5 years, the presented amputation appears to be consistent with "conventional" knee disarticulation. The femoral component still withstands the altered loads and the patient shows a further improved gait pattern.

Bone cement penetration pattern and primary stability testing in keeled and pegged glenoid components.

BACKGROUND: It has been proposed that bone mineral density has an influence on cement penetration in hip and knee arthroplasty. The hypotheses of this study were that: 1) there is a negative correlation between bone mineral density (BMD) and cement penetration in cemented glenoid components; and 2) that implant design has an influence on cement penetration into the glenoid bone. METHODS: BMD of 10 pairs of fresh frozen scapulas was measured. Micro-computed tomography (micro-CT) scans in 3 different sections were analyzed after implantation of keeled and pegged glenoid components using a 3(rd)-generation cementing technique with a vacuum mixing system. Cement penetration was analyzed and correlated with BMD. Pull-out strength testing was performed to analyze primary stability. RESULTS: The overall peak BMD was 0.6 [g/cm(2)] (range, 0.33-0.98). A strong negative correlation between BMD and mean cement penetration was found for the peg (R(2) = -.83; P < .003) and for the keel group (R(2) = -.81; P < .005). Mean cement penetration was 78.4 mm(2) (range, 60.6-94.2) in the keel and 113.9 mm(2) (range, 78.2-143.4) in the peg group (P < .0001). In all cases, the components were pulled out of the cement mantle, whereas the bone-cement interfaces remained intact. The mean pull-out strength was 1093N (764-1343N) for keeled and 884N (650-1264N) for pegged components (P < .05). CONCLUSION: A modern cementing technique, leading to a deep bonding between bone and cement, is crucial to prevent loosening of glenoid components. The findings of this study might help us to better understand the results of follow-up studies of cemented glenoid implants. Our results could be helpful for the choice of implants in patients with poor bone quality like osteoporosis or rheumatoid arthritis.

Predictive simulation of post-stroke gait with functional electrical stimulation.

Post-stroke patients present various gait abnormalities such as drop foot, stiff-knee gait (SKG), and knee hyperextension. Functional electrical stimulation (FES) improves drop foot gait although the mechanistic basis for this effect is not well understood. To answer this question, we evaluated the gait of a post-stroke patient walking with and without FES by inverse dynamics analysis and compared the results to an optimal control framework. The effect of FES and cause-effect relationship of changes in knee and ankle muscle strength were investigated; personalized muscle-tendon parameters allowed the prediction of pathologic gait. We also predicted healthy gait patterns at different speeds to simulate the subject walking without impairment. The passive moment of the knee played an important role in the estimation of muscle force with knee hyperextension, which was decreased during FES and knee extensor strengthening. Weakening the knee extensors and strengthening the flexors improved SKG. During FES, weak ankle plantarflexors and strong ankle dorsiflexors resulted in increased ankle dorsiflexion, which reduced drop foot. FES also improved gait speed and reduced circumduction. These findings provide insight into compensatory strategies adopted by post-stroke patients that can guide the design of individualized rehabilitation and treatment programs.

U-Limb: A multi-modal, multi-center database on arm motion control in healthy and post-stroke conditions.

BACKGROUND: Shedding light on the neuroscientific mechanisms of human upper limb motor control, in both healthy and disease conditions (e.g., after a stroke), can help to devise effective tools for a quantitative evaluation of the impaired conditions, and to properly inform the rehabilitative process. Furthermore, the design and control of mechatronic devices can also benefit from such neuroscientific outcomes, with important implications for assistive and rehabilitation robotics and advanced human-machine interaction. To reach these goals, we believe that an exhaustive data collection on human behavior is a mandatory step. For this reason, we release U-Limb, a large, multi-modal, multi-center data collection on human upper limb movements, with the aim of fostering trans-disciplinary cross-fertilization. CONTRIBUTION: This collection of signals consists of data from 91 able-bodied and 65 post-stroke participants and is organized at 3 levels: (i) upper limb daily living activities, during which kinematic and physiological signals (electromyography, electro-encephalography, and electrocardiography) were recorded; (ii) force-kinematic behavior during precise manipulation tasks with a haptic device; and (iii) brain activity during hand control using functional magnetic resonance imaging.

The Migration Pattern of a Cementless Hydroxyapatite-Coated Titanium Stem under Immediate Full Weight-Bearing-A Randomized Controlled Trial Using Model-Based RSA.

(1) Background: High primary stability is important for the long-term survival of cementless femoral stems in total hip arthroplasty (THA). The objective of this study was to investigate the migration pattern of a hydroxyapatite-coated cementless hip stem developed for minimally invasive surgery using model-based radiostereometric analysis (RSA). (2) Methods: In this randomized controlled trial, 44 patients with an indication for cementless primary THA were randomly allocated to receive either the SL-PLUS MIA stem, developed for minimally invasive surgery, or the SL-PLUS stem (Smith & Nephew Orthopaedics, Baar, Switzerland) which served as a control group. Unlimited weight-bearing was permitted postoperatively in both groups. Model-based RSA was performed after six weeks and after 3, 6, 12 and 24 months postoperatively. (3) Results: Mean total stem subsidence at two-year follow-up was 0.40 mm (SD 0.66 mm) in the SL-PLUS group and 1.08 mm (SD 0.93 mm) in the SL-PLUS MIA group (p = 0.030). Stem subsidence occurred during the first six weeks after surgery, indicating initial settling of the stem under full weight-bearing. Both stem designs showed good osseointegration and high secondary stability with no further migration after initial settling. (4) Conclusions: Settling of a cementless straight femoral stem occurs during the first six weeks after surgery under full weight-bearing. Although initial stem migration was higher in the SL-PLUS MIA group, it had no influence on secondary stability. All implants showed good osseointegration and high secondary stability with no signs of implant loosening during this two-year follow-up period.

Influence of resting periods on polyethylene wear in a knee simulator study.

BACKGROUND: Knee wear simulator studies are performed to evaluate the wear behavior of implants. These wear studies simulate in vivo situations as closely as possible. Simulation of the human gait cycle is often carried out continuously according to international standards. However, implants are not loaded continuously in vivo, so it might be advisable to implement resting periods in which no motion occurs. MATERIAL/METHODS: In the present study the influence of resting periods on the wear behavior of a commercial implant was analyzed using a force-controlled AMTI knee simulator. RESULTS: The wear rates were 2.27+/-0.23 mg/10(6) cycles for a simulation with resting periods and 2.85+/-0.27 mg/10(6) cycles for a reference simulation without resting periods. There was no significant difference (p=0.22) in wear behavior between these two tests. CONCLUSIONS: The present study shows that continuous simulation without the implementation of resting periods is a valid approach for assessing the wear of knee implants.

The influence of age, bone quality and body mass index on periprosthetic femoral fractures: a biomechanical laboratory study.

BACKGROUND: A periprosthetic femoral fracture after total hip arthroplasty is a serious but uncommon complication, and therefore difficult to analyze clinically in scientifically and statistically valid study samples. With the aim of preventing these fractures the purpose of this study was to investigate potential risk factors associated with cementless hip arthroplasty in a standardized laboratory setup. Additionally, we aimed to clarify if the treatment with a cementless hip stem is fraught with higher risk of periprosthetic fracture for older patients compared to younger patients. MATERIAL/METHODS: A biomechanical setup was developed to provide analysis on sixteen femoral specimens of different age. A cementless hip stem was implanted into the specimens and loads - representing hip contact forces - were applied under standardized conditions until fracture occurred. The femurs were divided into two age groups (<70 and >or=77 years of age). RESULTS: The elderly specimens fractured at significantly lower maximum forces (<70: Fmax=5,308N; >or=77: Fmax=2,519N; p<0.01). Maximum fracture loads were found to correlate strongly with age (p=0.01), BMD (e.g. for the Ward's triangle: p<0.01) and BMI (p=0.04). CONCLUSIONS: In patients with advanced age treated with cementless hip stems the risk of suffering a periprosthetic fracture is significantly higher. It increases in patients with an age of 80 years or older, a Ward's triangle BMD below 0.500 g/cm2 and a BMI >33 kg/m2. Whereas one single factor must not be viewed as an exclusion criterion for a cementless hip stem treatment, cumulation of these factors should alert the orthopaedic surgeon.